Spill Tackle Universal Absorbent Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Granular & Granular filled; Booms, Pillow, Socks Product name : Spill Tackle 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/preparation : Cleaning/Absorbent 1.3. Details of the supplier of the safety data sheet Tackle Technologies, LLC 5244 A Avenue Long Beach, MS 39560 1.4. Emergency telephone number T 228-206-1449 SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Not 2.2. Label elements GHS-US labelling No labelling applicable 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Name Product identifier GHS-US classification Cellulose pulp (CAS No.) 65996-61-4 51% Not Rice Hulls (CAS No.) 9057-07-2 48% Not Classified Mineral Seal Oil (CAS No.) 64742-46-7 1% Not Classified SECTION 4: First aid measures
4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact 12/17/2012 EN (English). No special measures required.. Remove to fresh air. If breathing is difficult, administer oxygent. Seek medical attention.. Wash with plenty of soap and water. : If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Spill Tackle Universal Absorbent Safety Data Sheet First-aid measures after ingestion Seek medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation. Dust may irritate the respiratory tract (nose, throat and lungs). Symptoms/injuries after skin. May cause irritation. Mechanical rubbing may increase skin irritation. contact Not likely to be absorbed through the skin in harmful amounts. Symptoms/injuries after eye contact Symptoms/injuries after ingestion. May cause mechanical irritation. Rubbing may cause abrasion of cornea.. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Product contains a small amount of oil, which, if breathed into the lungs, can cause an aspiration hazard. 4.3. Indication of any immediate medical attention and special treatment needed 5.1. Extinguishing media Suitable extinguishing media. Use water, foam or carbon dioxide. Unsuitable extinguishing media. None. 5.2. Special hazards arising from the substance or mixture Fire hazard. Not flammable. Product can burn under fire conditions. Explosion hazard None known. Reactivity 5.3. Advice for firefighters. None. Protection during firefighting : Firefighters should wear full protective gear. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures. No special measures required. 6.1.1. For non-emergency personnel 6.1.2. For emergency responders 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up For containment. No special measures required. Methods for cleaning up. Shovel or sweep up and put in a closed container for disposal. 6.4. Reference to other sections
Spill Tackle Universal Absorbent Safety Data Sheet SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands thoroughly after handling. Keep container closed. Avoid breakage of bagged material or spills of bulk material. Use dustless systems for handling, storage, and clean-up to ensure exposure limits are not exceeded. Do not permit dust to accumulate in facilities, machinery, or equipment. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Store in dry areas with adequate ventilation. 7.3. Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters Ensure adequate ventilation in work 8.2. Exposure controls Hand protection Eye protection Skin and body protection Respiratory protection eas. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Solid Appearance Colour. Wear impervious gloves to minimize skin contact. : Safety glases with side shields. : Wear suitable working clothes. : In case of insufficient ventilation, wear suitable respiratory equipment. : Granules. : Tan Odour Odour threshold ph Relative evaporation rate (butylacetate=l) Melting point Freezing point : Musty. Not applicable : Not determined
Boiling point Flash point. Not applicable. Not applicable Self ignition temperature. 750 0 F (400 0 C) 12/17/2012 EN (English) 3/6
Spill Tackle Universal Absorbent Safety Data Sheet Decomposition temperature Flammability (solid, gas). Not applicable Vapour pressure : 0.2 mm Hg @ 100 0 F (37.8 0 C) (mineral oil) Vapour density : 8.0 (air I) (mineral oil) Relative density : Not determined Density Solubility : Insoluble. Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. Other information : Not determined : Not determined 10.1. Reactivity None. 10.2. Chemical stability The product is stable at normal handling- and storage conditions. 10.3. Possibility of hazardous reactions Will not occur. 10.4. Conditions to avoid Heat, flame and ignition sources. Avoid dispersion of dust in air. 10.5. Incompatible materials Strong oxidizers. 10.6. Hazardous decomposition products Decomposition of this product may emit oxides of nitrogen and carbon monoxide, carbon dioxide, and unidentified organic compounds.
Spill Tackle Universal Absorbent Safety Data Sheet SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity. Not Skin corrosion/irritation. Not Serious eye damage/irritation. Not Respiratory or skin sensitisation. Not Germ cell mutagenicity. Not Carcinogenicity : Not Reproductive toxicity : Not Specific target organ toxicity (single. Not exposure) Specific target organ toxicity (repeated exposure). Not Aspiration hazard. Not SECTION 12: Ecological information 12.1. Toxicity 12.2. Persistence and degradability 12.3. Bioaccumulative potential 12.4. Mobility in soil 12.5. Other adverse effects SECTION 13: Disposal considerations 12/17/2012 EN (English)
13.1. Waste treatment methods Waste disposal recommendations. Dispose of contents/container in accordance with local/regional/national/international regulations. SECTION 14: Transport information In accordance with DOT / ADR / RID / ADNR / IMDG / ICAO / IATA 14.1. UN number Not a dangerous good in sense of transport regulations. 14.2. UN proper shipping name Not applicable 5/6
Spill Tackle Universal Absorbent Safety Data Sheet 14.2 Additional information Other information Overland transport Transport by sea Air transport : No supplementary information available. SECTION 15: Regulatory information 15.1. US Federal regulations Cellulose pulp (65996-61-4) Rice Hulls (9057-07-2) Mineral Seal Oil (64742-46-7) Listed on the United States TSCA (Toxic Substances Control Act) inventory 15.2. US State regulations SECTION 16: Other information This information is based on our current knowledge and is intended to describe the productfor the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product.
12/17/2012 EN (English) 6/6