: 2900/513/0131100/0000 Medi-Flex, full length white core = no lining Our hallux rigidus orthotic insole blank has a plastic core extending to the forefront area, thus offering the best possible basis for individual care. The core s low material thickness allows for targeted cushioning of the joint at the base of the big toe. Full length white PET core, 3 mm The rigidus blank can also be bonded with a rubber pelotte and a Velon top cover or ordered loose. The core dependability has been proven over the years, and requests for follow-up orders confirm the satisfaction of our customers. Full length Standard 2900/513/* 35-48 501
: 3500/713/0002690/2222 Metaform blank, Mühlheim model, with forefoot cushioning This blank was developed at the request of one of our customers. Here it was important to smoothly provide additional forefoot cushioning under the footbed. An optimum transition was achieved by integrating a step into the base part from below. 3 mm PU in beige, 20 Shore 3 mm Metaform forefoot cushioning in beige bonded underneath, 30 Shore White foam footbed (with step) Available in: Various cushioning materials Only in one width Only with pelotte pressure Wider forefoot wide 3500/713/* 35-45 502
: 3600/524/0444450/0000 Blank with soft cushioning and retrocapital cross support This blank provides relief for the metatarsal heads without making compromises. 4 mm beige Metaform cushioning, blue, 30 Shore Blue, firm LIGHT 8 mm base part, 65 Shore, EVA With retrocapital cross support Available in: Various base part materials A cork leather blank with retrocapital cross support is also available. Medium 3600/514/ 35-48 Wide 3600/524/* 35-48 Wider forefoot wide 3600/725/ 35-48 Square-toes 3600/614/ 35-48 503
: 3800/614/... Patchwork sports blank, Systems 1 through 3 This popular sports blank was developed in collaboration with orthopaedic shoe technicians and master orthopaedic shoemakers. By using foams with various Shore strengths, Systems 1, 2 and 3 cover all sporting activities. 6 mm cushioning top cover with integrated segments (various Shore strengths) Blue, firm LIGHT 8 mm base structure, 65 Shore, EVA Available in: 3800/614/0014400/ (hell) = System I = ca. 25 Shore 3800/614/0024400/ (mittel) = System II = ca. 40 Shore 3800/614/0034400/ (dunkel) = System III = ca. 30 Shore On the one hand, the integrated segments are characterised by various Shore strengths as well as various elasticity characteristics. As a result, the foot is optimally supported in all kinds of sports. Square-toes 3800/614/* 35-48 504
: 3600/614/0445290/2224 Blank with soft cushioning and cushioning to relieve heel spurs This blank was developed at the request of one of our customers. The specifications: The cushioning to relieve heel spurs should not be bonded, but removable The material should be Lunairmed beige 4 mm beige Metaform cushioning, blue, 30 Shore With removable cushioning to relieve heel spurs made of 4 mm Lunairmed, 18 Shore White Metaform 8 mm base structure, 50 Shore A heel spur blank is also available as a version with a plastic core ( 5000/512/4392784/2221). Square-toes 3600/614/* 35-48 505
: 5000/512/4392784/2221 Diaflex blank with heel spur cut-out To address the problem of heel spurs, we make a plastic core with a long, cut-out hole. The core can be supplied loose and with lining as a construction set, or completely bonded as depicted here. In this case we have bonded the blank with V-V heel cushioning. Starting with approx. 3 mm in the heel area, the padding ends in forefoot with around 2 mm. The latex foam used here is very soft and elastic, and retains its shape extremely well. Perforated synthetic leather Padding in grey throughout, thicker in the heel area and getting thinner as it approaches the forefoot, 27 Shore Bonded rubber pelotte Diaflex core throughout, from the heel to under the pelotte, with heel spur cut-out mit Fersensporn-Aussparung Full length fleece base lining Available: With other covering materials With other cushioning materials Full length Sizes (eu) with V-V-verse cushioning 5000/512/4392784/00001* 35-48 506
: 9100/614/0461300/0000 Luna blank with soft cushioning, black, anti-static This anti-static blank is made from EVA plates by the company nora SYSTEMS GmbH. A test certificate by the testing and research institute Pirmasens e.v. (PFI) exists regarding the electrical resistance and can be enclosed. 4 mm Lunasoft cushioning, anti-static, 40 Shore Luna Light base part, 8 mm, anti-static, 58 Shore We also supply this blank with the covering: X-Static, antimicrobial, equipped with silver ions (For a description also see 3600/614/4009280/2223) This model has also been tested by PFI. The blank has a distinctive heel cup, but no elevated edge. Medium 9100/524/ 35-50 Wider forefoot narrow 9100/713/ 35-50 Wider forefoot wide 9100/725/ 35-50 Square-toes 9100/614/* 35-50 507