Material Safety Data Sheet

Similar documents
Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet BIOGUARD POOL TONIC

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Version: 1.2 Revision Date: 09/02/2010 Print Date: 03/05/2014 BIOGUARD SCALE INHIBITOR

Material Safety Data Sheet OMNI POOL SURFACE CLEANER

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet BIOGUARD BALANCE PAK 200

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet BIOGUARD POWER FLOC

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet SPAGUARD TOTAL ALKALINITY

Version: 1.2 Revision Date: 01/01/2014 Print Date: 03/10/2014 SPAGUARD BALANCER SPA SENTRY

Version: 1.1 Revision Date: 01/01/2014 Print Date: 03/05/2014 BIOGUARD CHEM OUT

SAFETY DATA SHEET. Royco 885 (New formulation)

Material Safety Data Sheet

Material Safety Data Sheet SPA ESSENTIALS DEFOAMER

SAFETY DATA SHEET. Royco 44

MATERIAL SAFETY DATA SHEET

DANGER! Form: crystalline BIOGUARD REMEDY ERASE COPPER STAIN REMOVER. BIOGUARD REMEDY ERASE COPPER STAIN REMOVER Swimming Pool Product

Material Safety Data Sheet

ROYCO 782 PRF Lubricant Hydraulic fluid

SIGMA-ALDRICH. Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name : Titanium(IV) chloride

Material Safety Data Sheet (p-nitro Benzoyl Chloride)

Material Safety Data Sheet

HL-1 LIQUID COMPONENT OF 77201

SAFETY DATA SHEET. Royco 363

ProGuard Sodiium Carbonate

Version 1.3 Revision Date Print Date : CHEMTREC

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

StoneTech Professional Impregnator Pro Sealer

1.Identification of The Substance/Mixture and of The Company

Omni Clear Magic. Recreational Water Product

SAFETY DATA SHEET. Royco 950

Material Safety Data Sheet

1. IDENTIFICATION FAST FIND LEAK DETECTOR. Package type: 32oz & 1 gallon. For Professional use only. 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Disposal considerations : Dispose of wastes in an approved waste disposal facility.

Material Safety Data Sheet

MSDS Number: : F

SAFETY DATA SHEET ROYCO 581 MIL-C-6529 T1

Whirlpool Corporation 2000 N. M-63 Benton Harbor, MI (USA) (CANADA)

CAS-No. EC-No. Index-No. Concentration Cetrimonium chloride % Water %

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 07/23/2010 Print Date 08/29/2011

CAS-No. EC-No. Index-No. Concentration 8,9,10-trinorborn-2-ene

Plant Growth Regulator. Chemtura USA Corporation Chemtura Corporation (Worldwide HQ) 199 Benson Road Middlebury, CT USA

Healthbond 2300 Ultra Green Plus Carpet Tile Adhesive

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 03/12/2010 Print Date 08/31/2011

Omni Multi Purpose Algaecide 60

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Safety Data Sheet Methyl-(endo)-5-norbornene-2,3-dicarboxylic anhydride

CAS-No. EC-No. Index-No. Concentration Hydrogen iodide >= 55 - <= 58 % Water >= 42 %

Material Safety Data Sheet

Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

: Defoamer Concentrate

Material Safety Data Sheet

8728 Utica Avenue Rancho Cucamonga, CA Telephone: 24 Hours: or Daytime: Fax:

SPOTLESS :: Safety Data Sheet Version 1.0 Issuing Date 06/1/15

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

Sodium thiosulfate concentrate X1EA Version 1.1 Revision Date 10/08/2018 Print Date 10/19/2018

MATERIAL SAFETY DATA SHEET. Revision Number: 1

1. IDENTIFICATION. Phone (for additional emergency support only: INFOTRAC (International) (North America)

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Material Safety Data Sheet

Issue Date: 27-Dec-2011 Revision Date: 03-Feb-2015 Version 1 1. IDENTIFICATION. Malodor Eliminator, Water Based.

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Material Safety Data Sheet

Revision Date 13-Jul IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. No information available

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Issue Date 16-May-2006 Revision Date 04-May-2016 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION. Tripoli Composition Polishing Material

Synonyms : 3,8-Diamino-5-ethyl-6-phenylphenanthridinium bromide EtBr Homidium bromide

May be harmful if inhaled. Causes respiratory tract irritation. Skin. Toxic if absorbed through skin. Causes skin irritation. Eyes

BioGuard Power Floc. BioGuard Power Floc. Water Clarifier

8728 Utica Avenue Rancho Cucamonga, CA Telephone: 24 Hours: or Daytime: Fax:

Issue Date: 27-Dec-2011 Revision Date: 28-Jul-2015 Version 1 1. IDENTIFICATION. Buckeye Sanicare Disinfecting Wipes

SAFETY DATA SHEET HATCOL 32 BCE

CAS-No. EC-No. Index-No. Concentration Hydrogen iodide % Water %

Material Safety Data Sheet

Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET. Revision Number: 3

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.2 Revision Date 11/22/2012 Print Date 03/04/2014

WT-9011 SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/2015

Safety Data Sheet. Section 1. Product and Company Identification. Section 2. Hazards Identification

Revision Date 18-Oct PRODUCT AND COMPANY IDENTIFICATION. Isonicotinamide oxime; N -Hydroxypridine-4-carboximidamide 2. HAZARDS IDENTIFICATION

Excelsior NC-900 Excelsior All-Purpose Neutral Cleaner

1. IDENTIFICATION. WipesPlus Patient Washcloths. INFOTRAC (International) (North America) 2. HAZARDS IDENTIFICATION

Material Safety Data Sheet Protective Welding Spray

Material Safety Data Sheet (alpha-ketoglutaric Acid)

14 - Informations relatives au transport ALOX 721

PRODUCT AND COMPANY IDENTIFICATION

Revision Date 13-Jul IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. Cyproheptadine hydrochloride

SIGMA-ALDRICH. Material Safety Data Sheet Version 5.0 Revision Date 12/13/2012 Print Date 02/26/2014

Emergency Overview The product contains no substances which at their given concentration are considered to be hazardous to health.

Transcription:

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Synonyms: p-toluenesulfonyl Isocyanate Company: Chemtura Corporation 199 Benson Road Middlebury, CT 06749 United States of America Telephone: 866-430-2775 Emergency telephone number: CHEMTREC: (24 hours) 800-424-9300 : Chemtura Corporation Emergency Response: CHEMTURA : 800-292-5898 For additional emergency telephone numbers see section 16 of the Safety Data Sheet. Prepared by: 08/25/2011 Product Safety Department (US) +1 866-430-2775 +011-886-2-2712-5668 MSDSRequest@chemtura.com SECTION 2. HAZARDS IDENTIFICATION Emergency Overview DANGER! Form: liquid Colour: colourless Odour: characteristic Hazard Summary OSHA Hazards : : Irritating to eyes, respiratory system and skin. Repeated exposure may cause sensitization of the respiratory tract and the development of an asthmatic reaction on further exposure. Reacts violently with water. SENSITISER IRRITANT WATER REACTIVE SAP 6.0 1 / 7 SDS Number: 000000008293

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components Component / CAS-No. p-toluenesulphonyl isocyanate 4083-64-1 Weight percent > 90 % SECTION 4. FIRST AID MEASURES First aid procedures Inhalation Skin contact : Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately. : Remove contaminated clothing and shoes. Wash off with soap and plenty of water. Obtain medical attention. Wash contaminated clothing before re-use. Destroy contaminated shoes. Eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms persist, call a physician. Ingestion : Do NOT induce vomiting. Immediately give large quantities of water to drink. If possible drink milk afterwards. Get medical attention immediately. SECTION 5. FIRE-FIGHTING MEASURES Flammable properties Flash point : 302 F (150 C) Fire fighting Suitable extinguishing media : Foam Carbon dioxide (CO2) Dry powder Extinguishing media - large fires Water mist Water spray Protective equipment and precautions for firefighters Specific hazards during fire fighting : Burning produces noxious and toxic fumes. Container may explode if heated. Do not allow run-off from fire fighting to enter drains or water courses. SAP 6.0 2 / 7 SDS Number: 000000008293

Special protective equipment for fire-fighters : Self-contained breathing apparatus (EN 133) Wear suitable protective clothing, gloves and eye/face protection. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Methods for containment / Methods for cleaning up : Evacuate personnel to safe areas. Wear suitable protective equipment. : Do not flush into surface water or sanitary sewer system. : Wear suitable protective clothing, gloves and eye/face protection. Supplies of suitable decontaminant/commercial decontaminant should always be kept available. Contain and cover the spillage with inert absorbent (sand, earth, vermiculite) and decontaminant/commercial decontaminant. Leave to react for at least 30 minutes. Shovel residues into open-top drums and remove for further decontamination if necessary. Clean area with water and additional decontaminant/commercial decontaminant. Test atmosphere for vapors to ensure safe working conditions before other personnel are allowed in the area. Suitable decontaminant solution: Commercial solution or water 90-95%, concentrated ammonia solution 5-10%, liquid detergent 0,2-2%. SECTION 7. HANDLING AND STORAGE Handling Handling procedures : Avoid contact with skin, eyes and clothing. Use only in well-ventilated areas. In case of insufficient ventilation, wear suitable respiratory equipment. Slacken off drum bungs before heating to prevent any pressure build up. Do not handle until all safety precautions have been read and understood. Wash thoroughly after handling. Storage Requirements for storage areas and containers : Keep containers tightly closed in a dry, cool and well-ventilated place. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure Guidelines Engineering measures Personal protective equipment Eye protection : Safety glasses with side-shields or Face-shield Safety goggles Hand protection : Impervious gloves SAP 6.0 3 / 7 SDS Number: 000000008293

Skin and body protection Respiratory protection Hygiene measures : Lightweight protective clothing : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Due to the poor warning properties regarding the chemical(s) of concern, negative pressure air purifying respirators are not recommended at any exposure level in excess of the exposure limit values. Self-contained breathing apparatus (EN 133) : Ensure adequate ventilation, especially in confined areas. Keep container tightly closed. Wash thoroughly after handling. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Colour Odour : liquid : colourless : characteristic Safety data Flash point : 302 F (150 C) Melting point/range : 28 F (-2 C) Boiling point/boiling range : 518 F (270 C) at 1,013.2472 hpa (101,324.720 mmhg) Specific Gravity : 1.29 at 20 C Solubility in other solvents : Medium: Organic solvents Note: soluble SECTION 10. STABILITY AND REACTIVITY Conditions to avoid Materials to avoid Hazardous decomposition products : Remarks: Exposure to moisture. Heat. : Remarks: Water Acids and bases Alcohols Oxidizing agents : Note: Ammonia Carbon oxides nitrogen oxides (NOx) Hydrogen cyanide Heating or fire can release toxic gas. SAP 6.0 4 / 7 SDS Number: 000000008293

SECTION 11. TOXICOLOGICAL INFORMATION Acute oral toxicity : LD50 Oral: 2,600 mg/kg Species: rat Acute inhalation toxicity : LC50: > 640 mg/l Exposure time: 1 h Species: rat Remarks: Isocyanates may cause acute irritation and/or sensitisation of the respiratory system leading to tightness of the chest, wheeziness and an asthmatic condition. Skin irritation : Remarks: Irritating to skin. Eye irritation : Remarks: Irritating to eyes. 12. ECOLOGICAL INFORMATION Further information on ecology Additional ecological : The product itself has not been tested. information SECTION 13. DISPOSAL CONSIDERATIONS Further information : In accordance with local and national regulations. SECTION 14. TRANSPORT INFORMATION DOT UN number : 2206 Description of the goods : Isocyanates, toxic, n.o.s. Class : 6.1 Packing group : III ERG Code : 155 IATA UN number : 2206 Description of the goods : Isocyanates, toxic, n.o.s. Class : 6.1 Packing group : III Labels : 6.1 Environmentally hazardous : no SAP 6.0 5 / 7 SDS Number: 000000008293

IMDG UN number : 2206 Description of the goods : ISOCYANATES, TOXIC, N.O.S. Class : 6.1 Packing group : III Labels : 6.1 EmS Number 1 : F-A EmS Number 2 : S-A Marine pollutant Environmentally hazardous : no : no SECTION 15. REGULATORY INFORMATION OSHA Hazards SARA 311/312 Hazards : Sensitiser, Irritant, Water Reactive : Acute Health Hazard Reactivity Hazard Pennsylvania Right To Know Components : p-toluenesulphonyl isocyanate 4083-64-1 New Jersey Right To Know Components : p-toluenesulphonyl isocyanate 4083-64-1 tosyl chloride 98-59-9 The components of this product are reported in the following inventories: US.TSCA On TSCA Inventory DSL AICS NZIoC ENCS KECI PICCS All components of this product are on the Canadian DSL list. SAP 6.0 6 / 7 SDS Number: 000000008293

IECSC SECTION 16. OTHER INFORMATION Further information HMIS Classification : Health hazard: 2 Flammability: 1 Reactivity: 2 Other Emergency Phone Number Latin America: Brazil +55 113 711 9144 All other countries +44 (0) 1235 239 670 Mexico: +52 555 004 8763 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. SAP 6.0 7 / 7 SDS Number: 000000008293