FILTER REGULTOR We produce with artistic attitude.
DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including all kinds of, back pressure, volume boosters, electronic proportional, flow control valves, FRL units, pressure transducers and pressure gauge. DURY products are widely used in industry, medical equipment manufacturing, hemical, pharmaceutical, electronics industry and laboratory in the world. Regulator products cover an extensive product line ranges from large to small port, high pressure to low pressure. We will be your most professional pressure control equipment supplier in hina. DURY has established inventory distribution system in Mainland hina, Most commonly used models can be shipped within 24 hours after order being released, the expert team in hina will be always at your service, solving your problems in gas system, fluid technology and electronic technology, and we will choose the most suitable products to meet the requirements of your condition. ontents 548 Miniature Pressure Regulator......12.01 11/12 Midi Pressure Regulator......12.02 042 095 Pressure Regulator Made of Plastic.. 12.03 3000 Regulator,Stainless Steel Throughout, up to 50 bar..12.04 4000 Stainless Steel Regulator...... 12.05 35/75/105 ube Pressure Regulator... 12.0 20/21 Maxi Pressure Regulator......12.07 D Pressure Regulator Series D, up to 30 bar....12.08 300 Pressure Regulator down to -40 / -40 F........12.09 M Regulator Made of rass, up to 50 bar..... 12.10
Miniature Pressure Regulator 548 Regulator of small and compact design, ideal for limited space conditions. compressed air or non-corrosive gases Supply pressure max. 11 bar for plastic bowl, max. 21 bar for metal bowl djustment by plastic knob with snap-lock Relieving function relieving G 1 8 on both sides of the body, screw plugs supplied element 20 µm, optionally 5 µm, made of polypropylene owl plastic or metal version Drainage manual drain as standard, for max. 21 bar semiautomatic drain as option, for max. 12 bar Temperature range 0 to 50 / 32 F to 122 F for plastic bowl and semiautomatic drain version 0 to 80 / 32 F to 17 F for metal bowl Material ody: aluminium Elastomer: NR/una-N Spring cage: glass fibre-reinforced plastic Inner valve: brass owl: polyurethane or zinc die-cast G 1 8 and G¼ Dimensions owl Flow Supply onnection Pressure Order Design apacity rate max. thread range number mm mm mm made of l m ³ /h* 1 l/min* 1 bar G bar Miniature filter regulator with manual drain, relieving, Versorgungsdruck max. 13 barw/o pressure gauge, 20 µm filter element 548 40 152 8 plastic 0.04 27 450 11 G 1 8 0.2 1.8 548-01H 0.2 4.0 548-01H 0.3 9.0 548-01H metal 21 0.2 1.8 548-01DH 0.2 4.0 548-01DH 0.3 9.0 548-01DH 40 152 8 plastic 0.04 27 450 11 G¼ 0.2 1.8 548-02H 0.2 4.0 548-02H 0.3 9.0 548-02H metal 21 0.2 1.8 548-02DH 0.2 4.0 548-02DH 0.3 9.0 548-02DH 548-02H 5 µm filter element 548-0.. G. NPT connection thread 548-0....N non-relieving without relieving function 548-0....K semiautomatic drain RK500SY, max. 12 bar 548-0....M fibreglass spring cage max. 80 / 17 F, metal bowl 548-0. D..X57 548-02DH ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 M4001-.. * 2 mounting bracket made of steel W30-02 mounting nut made of plastic M30x1,5K made of aluminium M30x1,5 gauge G 1 8 RK500SY Ø5.5 17 12 31 548 W30-02 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 02 = 0 2.5 bar, 04 = 0 4 bar, 10 = 0 10 bar 548-01H hina website: www.duray-control.cn
Midi Pressure Regulator 11 / 12 pressure regulator with high flow and of small design. compressed air or non-corrosive gases Supply pressure max. 17 bar for metal bowl with sight glass, max. 21 bar for metal bowl without sight glass djustment by plastic knob with snap-lock at 11, by T-handle with locknut at 12 Relieving function relieving G¼ on both sides of the body, screw plugs supplied element 40 µm, optionally 5 µm, made of polypropylene owl metal version with sight glass, optionally without Drain manual drain as standard, for max. 21 bar semiautomatic or automatic drain as option, for max. 12 bar Temperature range 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass 0 to 50 / 32 F to 122 F for semiautomatic or automatic drain Material ody: zinc die-cast owl: zinc die-cast Inner valve: brass, optionally stainless steel Elastomer: NR/una-N, optionally FKM Spring cage: glass fibre-reinforced plastic at 11, zinc die-cast at 12 G¼ up to G½ Dimensions owl Flow Supply onnection Pressure Order Design apacity rate max. thread range number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar G bar Midi filter regulator manual drain, relieving, max. 17 bar Versorgungsdruck max. without 13 barpressure gauge, 40 µm filter element 11 0 210 120 metal / 0.12 120 2000 17 G¼ 0.2 1.8 11-02WJ sight glass 0.2 4.0 11-02WJ 0.3 9.0 11-02WJ 0.5 17 11-02WJD 0 210 120 metal / 0.12 132 2200 17 G 3 8 0.2 1.8 11-03WJ sight glass 0.2 4.0 11-03WJ 0.3 9.0 11-03WJ 0.5 17 11-03WJD 0 210 120 metal / 0.12 138 2300 17 G½ 0.2 1.8 11-04WJ sight glass 0.2 4.0 11-04WJ 0.3 9.0 11-04WJ 0.5 17 11-04WJD 11-02WJ with adjusting knob T-handle locknut included, height 215 mm 12-0.... 5 µm filter element 11-0.. G. bowl w/o sight glass max. 21 bar, 0 to 80 / 32 F to 17 F, for appropriately conditioned compressed air down to -30 /-22 F 11-0. D.. NPT connection thread 11-0.... N non-relieving without relieving function 11-0.... K semiautomatic drain RK500SY, max. 12 bar 11-0.... M automatic drain S05MD, max. 12 bar 11-0.... R FKM elastomer inner parts made of brass 11-0.... X4 ccessories, enclosed pressure gauge Ø 50 mm, 0 * 2 bar, G 1 4 M5002-..* 2 mounting bracket made of steel W45-02 mounting bracket made of plastic M45x1,5K made of aluminium M45x1,5 12-02WJ with T-handle gauge G 1 4 gauge G 1 4 RK500SY S05MD 44 8 48 11 12 W45-02 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 02 = 0 2.5 bar, 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 11-02WJ hina website: www.duray-control.cn
Pressure Regulator Made of Plastic 042 095 Modular pressure filter regulator which can be interlocked with all other instruments of the same series. compressed air or non-corrosive gases Supply pressure max. 15 bar djustment by plastic knob with snap-lock Relieving function relieving G 1 8 or G¼ at series 095, on both sides of the body, screw plugs supplied element 20 µm, optionally 5 µm, made of sintered polyethylene owl plastic version with bayonet catch, threaded connection at series 042 Drainage manual drain with semiautomatic drain, optionally automatic drain Temperature range 0 to 50 / 32 F to 122 F Material ody: nylon, POM at series 042 Inner valve: brass owl: polyamide Thread insert: brass Elastomer: NR/una-N G¼ up to G1 Dimensions owl Flow Supply onnection Order Design apacity rate max. thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar G Plastic filter regulator manual drain with semiautomatic drain, relieving, max. 15 bar Versorgungsdruck w/o max. gauge, 13 pressure bar range 0 8 bar, 20 µm filter element 42 8 12 plastic / 0.02 51 850 15 G¼ 042-02H 52 239 148 bowl guard 0.04 84 1 400 G 3 8 050-03H 52 239 148 0.04 90 1 500 G½ 052-04H 3 27 173 0.10 138 2 300 G½ 075-04H 137 27 173 0.10 144 2 400 G¾ 080-0H 115 411 237 0.20 840 14 000 G1 095-08H 0 042 5 µm filter element for 042 to 080 0.. -0. G. for 095 095-0. G. non-relieving without relieving function all 0.. -0... K 0... 4 bar pressure range for 042 to 080 0.. -0.. for 095 095-0.. 0...12 bar pressure range for 042 to 080 0.. -0.. D for 095 095-0.. D automatic drain 0.. -0... R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for 042 M4001-.. * 2 Ø 50 mm, 0 * 2 bar, G 1 8 for 050 to 080 M5001-.. * 2 Ø 3 mm, 0 * 2 bar, G¼ for 095 M302-.. * 2 mounting bracket made of steel, mounting nut at the device for 042 W30-01 for 050 to 080 W42-01 for 095 W00-02 050 14 105 30 4 34 F D Ø E 5 8.5 W00-02 17 29 W30-01 42 W42-01 095 gauge G 5 gauge G 1 hose connection x4 042 080 095 L K Series D Ø E F K L 042 10.5 4.5 31 42 050/52 1 5.5 41 3 52 075 17.5 5.5 45 75 3 080 17.5 5.5 45 3 * 1 at 10 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar 042-02H hina website: www.duray-control.cn
Regulator Made of Stainless Steel Throughout, up to 50 bar 3000 pressure regulator with bowl without sight glass completely made of stainless steel. pplication examples are the chemistry, petroleum processing as well as food industry and medical technology. compressed air, gases or liquids Supply pressure max. 50 bar (without drain) djustment by hexagon socket crew with locknut Relieving function relieving, optionally non-relieving G¼ on both sides of the body, G 1 8 at 3000-01, one screw plug supplied element 50 µm, optionally 5 µm, made of stainless steel owl stainless steel version without sight glass Drain screw plug as standard, optionally manual drain (max. 30 bar) or automatic drain (max. 1 bar) Temperature range -20 to 0 / -04 F to 140 F for NR/una-N, EPDM or FKM -20 to 130 / -04 F to 2 F for high temperature version down to -40 / -40 F for stainless steel diaphragm Material ody: stainless steel 31L, material no. 1.4404 O-rings: NR/una, optionally EPDM or FKM owl: stainless steel 31L, material no. 1.4404 Diaphragm: NR/una-N with PTFE coating, Inner valve: stainless steel 31L, material no. 1.4404 optionally stainless steel G 1 8 to G1, max. 50 bar up to 130 / 2 F Dimensions owl Regulating system Flow onnection Order capacity D = diaphragm rate thread number mm mm mm l P = piston m 3 /h* 1 l/min* 1 G pressure regulator screw plug, relieving, w/o gauge, supply pressure 50 bar, 50 µm filter element, pressure range 0.5 8 bar 40 188 11 0.04 D 3 00 G 1 8 3000-01 G¼ 3000-2 0 253 130 0.17 D 84 1400 G¼ 3000-02 G 3 8 3000-03 70 20 132 0.28 D 230 3800 G½ 3000-04 G¾ 3000-90 30 207 0.58 P 30 000 G¾ 3000-0 G1 3000-08 3000 5 µm filter element for G¼ (02) to G1 3000-.. G NPT connection thread 3000-.. N 0.2 3 bar pressure range 3000-.. 1 15 bar pressure range 3000-.. D manual drain max. 30 bar 3000-.. H automatic drain max. 1 bar for G¼ (02) to G1 3000-.. R non-relieving without relieving function 3000-.. K up to 130 / 2 F high temperature version 3000-.. X54 EPDM elastomer 3000-.. E FKM elastomer 3000-.. V SST diaphragm not for water for G¼ to G¾ 3000-.. S nitrogen N 2 : 07 ammonia NH 3 : 02 carbon dioxide O 2 : 3000-.. 03 argon r: 05 helium He: 09 hydrogen H 2 : 3000-.. 11 methane H 4 : 13 oxygen O 2 : 15 propane 3 H 8 : 3000-.. 1 nitrous oxide N 2 O: 3000-.. 17 flange connection see end of the chapter / flanges 3000-.. F. FD material SST diaphragm, EPDM o-rings for G¼ 3000-.. 3000-02, 3000-04, ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G 1 4 (2) MS4001-..* 2 Ø 50 mm, 0 * 2 bar, G¼ for G 1 4 to G 3 4 () MS5002-..* 2 Ø 3 mm, 0 * 2 bar, G¼ for G 3 4 and G1 MS302-..* 2 mounting bracket for G 1 8 and G 1 4 (2) W30-03S mounting nut M30x1,5S mounting bracket for G 1 4 (02) to G 3 8 W45-03S mounting nut M45x1,5S mounting bracket for G½ and G1 W50-01S mounting nut M50x1,5S G¼, G 1 2 43 9 43 9 43 9 1 53 1 53 1 53 3000 W30-03S * 1 at 8 bar supply pressure, 8 bar outlet pressure and 1 bar pressure drop W45-03S W50-01S * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar 3000-01 hina website: www.duray-control.cn
4000 Stainless Steel Regulator 4000 filter made of stainless steel throughout, is for high pressure use,corrosion and chemical resistance, good performance in chemically environments and outdoor facility. piston regulated, accurate and sensitive pressure setting,suitable for semi-conductor industry,large flow rate and effectively removes water and particle,4000-md midi filter regulator also has the feature of light weight, compact size for space saving. Supply pressure max. 0bar (4000-MD max. 30bar) compressed air or other gas(including corrosive and non-corrosive) Relieving function 4000-MD and 4000-02/03/04 semi-auto drain,optionally manual drain, 4000-0/08 manual drain as standard Temperature range -20-70 G1/4(4000-MD G1/8)on both sides of the body,one screw plug supplied element 5μm,optionally 40μm,stainless steel 31 owl no window for stainless steel bowl,optionally with window for 4000-0/08(only for low pressure,max15bar) Material body: stainless steel 31 Inner valve: stainless steel 31 owl: stainless steel 31 G 1 4 到 G1, max. 0 bar Dimensions Drain Flow owl apacity Operating onnection D rate pressure thread mm mm mm mm l/min ar G Order Number MIDI Regulator P1: max. 30 bar, P2: 0...20 bar, 4000 45 0 115 1.5 semi-auto 1850 105 0... 20 G 1 4 4000-MD P1: max. 0 bar Regulator 4000 58 243 130 70.5 semi-auto 2200 110 0.5...30 G¼ 4000-02 2500 G 3 8 4000-03 3800 G½ 4000-04 75 275.5 142 82.3 manual 17000 200 5... 30 G¾ 4000-0 21000 G1 4000-08 4000-MD 40 µm filter element 4000 -..G NPT threaded port 4000 -..N 0.5...112bar range only for 4000-0/08 4000-0 Manual drain 4000 -..H uto drain only for 4000-02/03/04 4000 -.. R owl with window only for 4000-0/08 4000-..W D D 4000-02/03/04 4000-MD D 4000-02/03/04 4000-0/08 4000-0/08 4000-02 hina website: www.duray-control.cn
ube Pressure Regulator 35 / 75 / 105 Modular cube filter pressure regulator. Threads of ports in body or in end plates. Integrated wall mounting system, no brackets necessary. Pressure adjustment by tamper-proof plastic knob. compressed air or non-corrosive gases Relieving function relieving Supply pressure max. 11 bar for plastic bowl, max. 17 bar for metal bowl with sight glass, max. 21 bar for metal bowl without sight glass G 1 8 at 35 and 75 or G¼ at 105, on both sides of the body, screw plugs supplied element 20 µm or 40 µm, optionally 5 µm or 20 µm, made of polypropylene owl plastic version with or without bowl guard, metal version with or without all-around sight glass Drainage manual drain as standard for max. 21 bar, optionally automatic or semiautomatic drain for max. 12 bar Temperature range 0 to 50 / 32 F to 122 F for plastic bowl or (semi-)automatic drain version 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast at 35 and 75, aluminium at 105 Spring cage: glass fibre-reinforced plastic owl: polyurethane or zinc die-cast Elastomer: NR/una-N Inner valve: brass G 1 8 up to G¾ Dimensions owl Flow Supply onnection Order Design apacity rate max. element thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar µm G ube filter regulator with manual drain, relieving, without gauge, Versorgungsdruck pressure max. 13 range bar 0.3 9 bar 35/75/105 40 178 108 plastic 0.05 54 900 11 20 G 1 8 35-01H metal 21 35-01DH metal / sight glass 17 35-01WH plastic 0.05 1100 11 20 G¼ 35-02H metal 21 35-02DH metal / sight glass 17 35-02WH 5 208 138 plastic 0.11 114 00 11 40 G 3 8 75-03J plastic / bowl guard 11 75-03J metal 21 75-03DJ metal / sight glass 17 75-03WJ plastic 0.11 120 2000 11 40 G½ 75-04J plastic / bowl guard 11 75-04J metal 21 75-04DJ metal / sight glass 17 75-04WJ 8 22 plastic 0.25 234 3900 11 40 G½ 105-04J plastic / bowl guard 11 105-04J metal 21 105-04DJ metal / sight glass 17 105-04WJ plastic 0.25 258 4300 11 40 G¾ 105-0J plastic / bowl guard 11 105-0J metal 21 105-0DJ metal / sight glass 17 105-0WJ 75-03J 75-03J 75-03DJ 75-03WJ 5 µm filter element for 105 105-0.. G. 20 µm filter element EK100H for 105 105-0.. H. semiautomatic drain PKF35, piston drain, max. 12 bar for 35 35-0....S RK500SY, spring-loaded, max. 12 bar all devices... -0....M automatic drain S05MD, max. 12 bar for 75 75-0....R SF105MD, max. 12 bar for 105 105-0....R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for 35 M4001-.. * 2 Ø 50 mm, 0 * 2 bar, G 1 8 for 75 M5001-.. * 2 Ø 3 mm, 0 * 2 bar, G¼ for 105 M302-.. * 2 mounting bracket made of steel, mounting at the spring cage for 35 / 75 W30-02 for 105 W45-02 mounting nut made of plastic for 35 / 75 M30x1,5K for 105 M45x1,5K made of aluminium for 35 / 75 M30x1,5 for 105 M45x1,5 mounting bracket made of steel, side mounting for 35 W00-03 for 75 W00-04 for 105 W00-05 E 44 17 Series D E Ø F ØF 35 14 33 4.5 Ø5.5 8 75 18 42 5.5 D 105 20 58.5 12 30 7 3 35 7 3 31 W30-02 54 7 3 48 W45-02 11 40 11 40 9 11 50 W35 105 W00-03 W00-04 W00-05 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 35-01H hina website: www.duray-control.cn
Maxi Pressure Regulator 20 / 21 High-capacity filter regulator of modular design with exchangeable inserts. an be interlocked with lubricator without needs for double nipples. Each maxi device may be taken from a fixed line in seconds by simply removing the mounting bolts. compressed air or non-corrosive gases Supply pressure max. 17 bar djustment by plastic knob with snap-lock at 20, by T-handle with locknut at 21 Relieving function relieving G¼ on both sides of the body, screw plugs supplied owl metal version with sight glass element 40 µm, optionally 5 µm, made of polypropylene Drainage manual drain as standard, optionally semiautomatic or automatic drain for max. 12 bar Temperature range 0 to 70 / 32 F to 158 F, up to 50 / 122 F for semiautomatic or automatic drain version Material ody: zinc die-cast Spring cage: zinc die-cast Knob (20): glass fibre-reinforced plastic T-handle (21): steel owl: zinc die-cast Sight glass: polyurethane Elastomer: NR/una-N Inner valve: brass and plastic G¼ up to G1 Dimensions owl Flow onnection Pressure Order Design apacity rate thread range number mm mm mm made of / with l m ³ /h* 1 l/min* 1 G bar Maxi filter regulator with manual drain, relieving, without gauge, Versorgungsdruck max. 4013 µm bar filter element, max. 17 bar 20 89 289 175 metal/sight glass 0.3 132 2200 G¼ 0.2 4.0 20-02WJ 0.3 9.0 20-02WJ 0.5 17 20-02WJD 18 3100 G 3 8 0.2 4.0 20-03WJ 0.3 9.0 20-03WJ 0.5 17 20-03WJD 288 4800 G½ 0.2 4.0 20-04WJ 0.3 9.0 20-04WJ 0.5 17 20-04WJD 111 289 175 metal/sight glass 0.3 408 800 G¾ 0.2 4.0 20-0WJ 0.3 9.0 20-0WJ 0.5 17 20-0WJD 420 7000 G1 0,2 4,0 20-08WJ 0,3 9,0 20-08WJ 0,5 17 20-08WJD 20 with adjusting knob T-handle including locknut, total height 329 mm 21-0. W.. filter element 5 µm 20-0. WG. NPT connection thread 20-0. W..N non-relieving without relieving function 20-0....K semiautomatic drain RK500SY, max. 12 bar 20-0. W..M automatic drain S05MD, max. 12 bar 20-0. W..R ccessories, enclosed pressure gauge Ø 3 mm, 0 * 2 bar, G¼ M302-..* 2 mounting bracket mounting at the spring cage W45-02 mounting nut made of plastic M45x1,5K made of aluminium M45x1,5 mounting bracket set made of steel MK20-0100 44 89 21 with T-handle Ø.5 gauge G¼ 15 35 24 MK20-0100 RK500SY S05MD 44 8 20 48 W45-02 * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 25 = 0 25 bar 20-02WJ hina website: www.duray-control.cn
Pressure Regulator Series D, up to 30 bar D Good value zinc die-cast regulator of solid design and diaphragm operating system. Wall mounting through two drilled holes in the body. Suitable for compressed air or non-corrosive gases. Supply pressure max. 12 bar for plastic bowl, max. 1 bar for metal bowl with sight glass, max. 30 bar for metal bowl without sight glass djustment G 1 8 to G½: by plastic knob with snap-lock, G¾ to G1½ (D-1.): by handwheel, G1½ (D-12.) to G2: by T-handle with locknut G¼ or G 1 8 at D-01/02, on both sides of the body, one screw plug supplied element 20 µm and 50 µm, optionally 5 µm or 50 µm, made of propylene owl plastic version, standard or short, metal version with or without sight glass Drainage semiautomatic drain up to 1 bar, optionally manual (max. 30 bar) or automatic drain (max. 1 bar) Temperature range 0 to 50 / 32 F to 122 F for plastic bowl and semiautomatic or automatic drain version 0 to 70 / 32 F to 158 F for metal bowl with sight glass 0 to 80 / 32 F to 17 F for metal bowl without sight glass for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast at G 1 8 and G¼, Elastomer: NR/una-N aluminium at G 3 8 to G2 Inner valve: brass owl: polyurethane or zinc die-cast G 1 8 to G2 5/20/50 µm, up to 30 bar Dimensions owl Flow Supply onnection Order Design apacity rate max. element thread number mm mm mm made of / with l m ³ /h* 1 l/min* 1 bar µm G pressure regulator with semiautomatic drain, relieving, Versorgungsdruck max. 13 without bar pressure gauge, pressure range 0.5 8 bar 40 8 125 plastic 0.05 27 450 12 20 G 1 8 D-01L 40 14 91 plastic, short 0.03 12 D-01K 40 8 125 metal/sight glass 0.05 1 D-01M 40 8 125 metal 0.05 1 D-01N 40 8 125 plastic 0.05 30 500 12 20 G¼ D-02L 40 14 91 plastic, short 0.03 12 D-02K 40 8 125 metal/sight glass 0.05 1 D-02M 40 8 125 metal 0.05 1 D-02N 4 250 14 metal/sight glass 0.20 108 1 800 1 50 G 3 8 D-03M metal 0.20 1 D-03N 4 250 14 metal/sight glass 0.20 1 G½ D-04M metal 0.20 1 D-04N 90 282 172 metal/sight glass 0.50 300 5000 1 50 G¾ D-0M metal 0.50 1 D-0N 90 282 172 metal/sight glass 0.50 1 G1 D-08M metal 0.50 1 D-08N 150 282 172 metal/sight glass 0.50 390 500 1 50 G1¼ D-10M metal 0.50 1 D-10N 150 282 172 metal/sight glass 0.50 1 G1½ D-1M metal 0.50 1 D-1N 210 540 450 metal/sight glass 1.00 90 1000 1 50 G1½ D-12M metal 1.00 1 D-12N 210 540 450 metal/sight glass 1.00 1020 17000 1 G2 D-1M metal 1.00 1 D-1N 5 µm filter element D-... G 1... 15 bar range D-... E operating pressure 30 bar only for metal bowl without sight glass, with manual drain D-..NH manual drain max. 1 bar for metal bowl with sight glass D-... H automatic drain max. 1 bar, drainage through float valve for G 3 8 to G2 D-... R ccessories, enclosed pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G¼ M4001-..* 2 Ø 50 mm, 0 * 2 bar, G 1 4 for G 3 8 and G½ M5002-..* 2 Ø 3 mm, 0 * 2 bar, G¼ for G¾ to G2 M302-..* 2 mounting bracket made of steel for G 1 8 and G¼ W30-02 mounting nut made of plastic for G 1 8 and G¼ M30x1,5K mounting bracket made of steel for G 3 8 and G½ W50-03 mounting nut made of plastic for G 3 8 and G½ M50x1,5K mounting bracket made of steel for G¾ to G1½ (1.) W00-0 D D M ØE only G1½ inlet P P cross section outlet 18 57 W50-03 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar Ø5.5 12 31 17 W30-02 53 Ø10 13 D type M D Ø E D-01/02 M30x1,5 30 4.5 D-03/04 M50x1,5 51 5.5 D-0 to -1 M50x1,5 7.5 13 50 15 0 7 W00-0 D-02L D-02M D-04M D-08M D-01L hina website: www.duray-control.cn
Pressure Regulator down to -40 / -40 F 300 pressure regulator especially for low temperatures as well as supply of instruments. compressed air or non-corrosive gases Supply pressure max. 17 bar Supply sensitivity 10 mbar outlet pressure deviation at supply pressure variation of 1 bar djustment by square-headed spindle (spanner size 8 mm) with locknut Relieving function relieving, optionally non-relieving ¼ NPT on one side of the body, one screw plug supplied element 40 µm, optionally 5 µm, made of impregnated cellulose Drainage manual drain Temperature range 0 to 50 / 32 F to 122 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Spring cage: aluminium die-cast Elastomer: nylon-reinforced NR/una-N, optionally FKM Inner valve: brass, acetal, galvanised steel ¼ NPT Dimensions owl Flow Supply onnection Pressure Order design capacity rate max. thread range number mm mm mm made of l m ³ /h* 1 l/min* 1 bar NPT bar regulator with manual drain, relieving, without gauge, 40 µm filter element 300 7 80 83 metal 0.1 33 550 17 ¼ NPT 0 0.7 300-020 0 2.0 300-02 0 4.0 300-02 0 8.0 300-02 5 µm filter element 300-02. G non-relieving without relieving function 300-02. K tapped exhaust ¼ NPT 300-02. X12 tamper-proof cap 300-02. T FKM elastomer 300-02. V 300 ccessories, enclosed mounting bracket mounting at spring cage, made of steel W00-38 inlet outlet cross section 58 Ø8.5 4 300 W00-38 * 1 at 8 bar supply pressure, bar outlet pressure and 1 bar pressure drop 300-02O hina website: www.duray-control.cn
Regulator Made of rass, up to 50 bar M pressure regulator made of solid brass, with bowl without sight glass. compressed air, non-corrosive gases or liquids Supply pressure max. 50 bar (without drain) Relieving function relieving, optionally non-relieving djustment by black plastic knob at sizes G 1 8 to G 3 8, by T-handle with locknut at G½ to G2 G¼ or G 1 8 at M-01 and M-2, on both sides of the body, one screw plug supplied element 50 µm, optionally 5 µm, made of stainless steel owl stainless steel version without sight glass Drainage screw plug as standard, optionally manual drain (max. 30 bar) or automatic drain (max. 1 bar) Temperature range 0 to 0 / 32 F to 140 F for NR/FKM or EPDM -40 bis 0 / -40 F to 140 F for low temp. version 0 to 130 / 32 F to 17 F for high temperature version for appropriately conditioned compressed air down to -20 / -4 F Material ody: brass owl: stainless steel 31L / material no. 1.4404 Diaphragm: NR/una-N with PTFE coating, O-rings: NR/una-N, optionally EPDM or FKM Knob: plastic at sizes G 1 8 to G 3 8, brass at G½ to G2 Inner valve: brass and plastic (not at option X54) G 1 8 to G2, max. 50 bar -40 to 130 / -40 to 2 F Dimensions owl Regulating system Flow onnection Order Design apacity D = diaphragm rate thread number mm mm mm made of l P = piston m 3 /h* 1 l/min* 1 G rass filter regulator ccessories, enclosed with screw plug, relieving, without gauge, Versorgungsdruck supply max. pressure 13 bar max. 50 bar, 50 µm filter element, 0.5 8 bar M 40 188 11 stainless steel 0.04 D 3 00 G 1 8 M-01 3 00 G¼ M-2 5 240 140 stainless steel 0.17 D 84 1400 G¼ M-02 9 100 G 3 8 M-03 78 270 152 stainless steel 0.28 D 228 3800 G½ M-04 240 4000 G¾ M- 90 30 207 stainless steel 0.58 P 30 000 G¾ M-0 30 000 G1 M-08 210 540 450 stainless steel 1.00 P 720 12000 G1½ M-12 720 12000 G2 M-1 5 µm filter element for G¼ (02) to G¾ () for G¾ (0) and G1 M-0. G for G1½ and G2 M-.. G NPT connection thread M-.. N 0.2... 3 bar range M-.. 1...15 bar range M-.. D manual drain max. 30 bar M-.. H automatic drain made of stainless steel, max. 1 bar for G¼ (02) to G2 M-.. R non-relieving without relieving function M-.. K down to -40 / -40 F low temperature version M-.. X51 up to 130 / 2 F high temperature version M-.. X54 EPDM elastomer M-.. E FKM elastomer M-.. V flange connection see chapter for stainless steel devices / flanges M-.. F. T-handle instead of adjusting knob for G 1 8 to G 3 8 M-.. T nitrogen N 2 : 07 carbon dioxide O 2 : 03 argon r: M-.. 05 helium He: 09 hydrogen H 2 : 11 methane H 4 : M-.. 13 oxygen O 2 : 15 propane 3 H : 1 nitrous oxide N 2 O: M-.. 17 pressure gauge Ø 40 mm, 0 * 2 bar, G 1 8 for G 1 8 and G¼ (2) M4001-.. * 2 Ø 50 mm, 0 * 2 bar, G 1 4 for G¼ (02) to G¾ () M5001-.. * 2 Ø 3 mm, 0 * 2 bar, G¼ for G¾ (0) to G2 M302-.. * 2 gauge for -40 to 130 Ø.. mm, 0 * 2 bar, G 1. M302-.. X54* 2 mounting bracket made of stainless steel for G 1 8 and G¼ (2) W30-03S mounting nut M30x1,5S mounting bracket made of stainless steel for G¼ (02) to G 3 8 W35-01S mounting nut M35x1,5S mounting bracket made of stainless steel for G½ to G1 W50-01S mounting nut M50x1,5S gauge G¼, G 1 8 at M-01/-2 M-03H, M-0H, 43 9 43 9 43 9 1 53 1 53 1 53 M-..H W30-03S W35-01S W50-01S * 1 at 7 bar supply pressure, bar outlet pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar M-01 hina website: www.duray-control.cn
TEL : 8 510 0585 chinawebsite: www.duray-control.cn