RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F03 Product Name Product Type Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) [CBB61-S3(P2)] Product Code Customer Customer Code Issue Date 2015-8 Xiamen Faratronic Co. Ltd. represented by ALFATEC GmbH & Co.KG Meckenloher Str. 11 91126 Rednitzhembach / Germany Tel.: +49 (0) 91 22 / 97 96-0 Fax.: +49 (0) 91 22 / 97 96-50 E-mail: info@alfatec.de *.The specification are the property of Xiamen Faratronic Co.Ltd and shall not be copied or used as commercial purposes without permission. Page 1 of 7
Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) Outline Drawing Tinned Wires 1 Tinned Wires 2 Insulated flexible lead wires Tabs Features Widely applied to 50Hz/60Hz single phase AC motors for starting or running. Self-healing property High performance and reliability Safety class S3(P2), with segmented film designing. Safety Approval CQC ( 中国 ) TUV Rheinland ( 德国 ) UL/CUL ( 美国 / 加拿大 ) GB/T 3667.1-2005 A.C. motor capacitors 0.5μF~10μF 450Vac/500Vac 50/60Hz Class C P2 or 450Vac 50/60Hz Class B P2 40/70/21 or 40/85/21 File e No.: CQC13002103332 EN 60252-1:2011+A1:2013 and IEC 60252-1:2010+A1:2013 A.C. motor capacitors 0.5μF~10μF 450Vac/500Vac 50/60Hz Class C S3 or 450Vac 50/60Hz Class B S3 40/70/21 or 40/85/21 1.0μF~25μF 250Vac 50/60Hz Class B /Class C S3 40/70/21 or 40/85/21 File No.: R 50266163 UL 810, CSA C22.2.No190, max.500vac, 50/60Hz, max.85 C, Protected, 10 000AFC File No.: E232771, CNN:CYWT2/8 Page 2 of 7
Specifications Rated Voltage 500Vac (50/60Hz) 450Vac (50/60Hz) Class of operation Class C Class B or Class C Capacitance Range 0.5μF~10μF 0.5μF~10μF Class of safety protection S3(P2) Climatic Category 40/85/21 Capacitance Tolerance ±5 %, ±10 %, ±15% Between Terminals 1000Vac(2s) 900Vac(2s) Voltage Proof Between Terminals 3 000Vac(60s) And Case Maximum permissible voltage 1.1U N Maximum permissible current Insulation Resistance(IR CN) 3 000s (20 C,100V,1min) Dissipation Factor 1.3I N 0.0020 (1kHz, 20 C) Part number system The 18 digits part number is formed as follow: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 C 6 G Digit 1 to 3 Series code Digit 4 to 5 AC rated voltage H2=500V S2=450V Digit 6 to 8 Rated capacitance value For example : 105=10 10 5 pf= 1.0μF Digit 9 Capacitance tolerance J=±5%,K=±10% Digit 10 Pitch (for tinned wire ) B=27.5mm D=32.5mm W of the Dimension (for tabs and insulated flexible lead wires) 2=37mm 4=47mm Digit 11 Internal use Digit 12 to 15 Terminals code Digit 16 to 18 Internal use Table1 Terminals code Digit 12 Digit 13 Digit 14 Digit 15 Code Terminal form Code Fixed style Code Length of lead wire Code Length tolerance L M 3 4 7 8 B Tinned wires CP φ1.0mm Tinned wires CP φ0.8mm one AMP187# two AMP187# One AMP250# Two AMP250# UL1015 insulated lead wire 0 1 PCB Mounting ear in the middle of case s top 0 9 8 Standard tinned wire length (5mi n) or standard insulated flexible wire length(100min) or tabs Lead length 3.9mm 8 inch 0 1 2 3 Standard length or tabs Length tolerance ±0.5mm Length tolerance ±0.4mm Length tolerance ±0.3mm Page 3 of 7
Dimensions (mm) Tinned lead wire Tabs or Insulated flexible lead wires 500Vac(Class C) /450Vac(Class B /Class C) # 500Vac(Class C) /450Vac(Class B /Class C) # C N (μf) W±1 H±1 T±1 P 产品代码 C N (μf) W±1 H±1 T±1 P 产品代码 0.5 32.0 20.0 11.0 27.5 H2504-B0*0**+++ 1.0 37.0 22.0 13.0 25.0 H2105-20**00+++ 1.0 32.0 23.0 13.0 27.5 H2105-B0*0**+++ 1.2 37.0 24.0 14.0 25.0 H2125-20**00+++ 1.2 32.0 24.0 14.0 27.5 H2125-B0*0**+++ 1.4 37.0 25.0 15.0 25.0 H2145-20**00+++ 1.4 32.0 25.0 15.0 27.5 H2145-B0*0**+++ 1.5 37.0 26.0 15.0 25.0 H2155-20**00+++ 1.5 32.0 26.0 16.0 27.5 H2155-B0*0**+++ 1.6 37.0 26.0 15.0 25.0 H2165-20**00+++ 1.6 32.0 26.0 16.0 27.5 H2165-B0*0**+++ 1.8 37.0 26.0 18.0 25.0 H2185-20**00+++ 1.8 32.0 27.0 17.0 27.5 H2185-B0*0**+++ 2.0 37.0 26.0 18.0 25.0 H2205-20**00+++ 2.0 32.0 28.0 18.0 27.5 H2205-B0*0**+++ 2.2 37.0 28.0 18.0 25.0 H2225-20**00+++ 2.2 32.0 29.0 19.0 27.5 H2225-B0*0**+++ 2.5 37.0 30.0 18.0 25.0 H2255-20**00+++ 2.5 32.0 30.0 20.0 27.5 H2255-B0*0**+++ 2.8 37.0 30.0 20.0 25.0 H2285-20**00+++ 2.8 32.0 31.0 21.0 27.5 H2285-B0*0**+++ 3.0 37.0 30.0 20.0 25.0 H2305-20**00+++ 3.0 32.0 32.0 22.0 27.5 H2305-B0*0**+++ 3.5 37.0 33.0 21.0 25.0 H2355-20**00+++ 3.5 32.0 34.0 24.0 27.5 H2355-B0*0**+++ 4.0 37.0 34.0 22.0 25.0 H2405-20**00+++ 4.0 32.0 35.0 25.0 27.5 H2405-B0*0**+++ 4.5 37.0 36.0 24.0 25.0 H2455-20**00+++ 1.0 36.0 23.0 13.0 32.5 H2105-D0*0**+++ 5.0 37.0 37.0 25.0 25.0 H2505-20**00+++ 1.2 36.0 23.5 13.5 32.5 H2125-D0*0**+++ 5.5 37.0 38.0 26.0 25.0 H2555-20**00+++ 1.4 36.0 24.5 14.0 32.5 H2145-D0*0**+++ 6.0 37.0 39.0 27.0 25.0 H2605-20**00+++ 1.5 36.0 25.0 15.0 32.5 H2155-D0*0**+++ 6.3 37.0 40.0 28.0 25.0 H2635-20**00+++ 1.6 36.0 25.0 15.0 32.5 H2165-D0*0**+++ 6.5 37.0 40.0 28.0 25.0 H2655-20**00+++ 1.8 36.0 26.0 16.0 32.5 H2185-D0*0**+++ 7.0 37.0 42.0 28.0 25.0 H2705-20**00+++ 2.0 36.0 27.0 17.0 32.5 H2205-D0*0**+++ 8.0 37.0 44.0 30.0 25.0 H2805-20**00+++ 2.2 36.0 29.0 17.0 32.5 H2225-D0*0**+++ 2.5 47.0 28.0 16.0 35.0 H2255-40**00+++ 2.5 36.0 30.5 18.8 32.5 H2255-D0*0**+++ 3.0 47.0 29.0 17.0 35.0 H2305-40**00+++ 2.8 36.0 30.5 18.8 32.5 H2285-D0*0**+++ 3.5 47.0 30.0 18.0 35.0 H2355-40**00+++ 3.0 36.0 30.0 20.0 32.5 H2305-D0*0**+++ 4.0 47.0 31.0 19.0 35.0 H2405-40**00+++ 3.5 36.0 33.0 21.0 32.5 H2355-D0*0**+++ 4.5 47.0 32.0 20.0 35.0 H2455-40**00+++ 4.0 36.0 34.0 22.0 32.5 H2405-D0*0**+++ 5.0 47.0 33.0 21.0 35.0 H2505-40**00+++ 4.5 36.0 36.0 24.0 32.5 H2455-D0*0**+++ 5.5 47.0 34.0 22.0 35.0 H2555-40**00+++ 5.0 36.0 37.0 25.0 32.5 H2505-D0*0**+++ 6.0 47.0 34.0 24.0 35.0 H2605-40**00+++ 5.5 36.0 38.0 26.0 32.5 H2555-D0*0**+++ 6.5 47.0 36.0 24.0 35.0 H2655-40**00+++ 6.0 36.0 39.0 27.0 32.5 H2605-D0*0**+++ 7.0 47.0 37.0 25.0 35.0 H2705-40**00+++ 6.3 36.0 40.0 28.0 32.5 H2635-D0*0**+++ 7.5 47.0 38.0 26.0 35.0 H2755-40**00+++ 6.5 36.0 40.0 28.0 32.5 H2655-D0*0**+++ 8.0 47.0 38.0 28.0 35.0 H2805-40**00+++ 7.0 36.0 42.0 28.0 32.5 H2705-D0*0**+++ 8.5 47.0 40.0 28.0 35.0 H2855-40**00+++ 7.5 36.0 42.0 30.0 32.5 H2755-D0*0**+++ 9.0 47.0 40.0 30.0 35.0 H2905-40**00+++ 8.0 36.0 44.0 30.0 32.5 H2805-D0*0**+++ 9.5 47.0 40.0 30.0 35.0 H2955-40**00+++ 8.5 36.0 44.0 32.0 32.5 H2855-D0*0**+++ 10.0 47.0 42.0 30.0 35.0 H2106-40**00+++ Note:1. - =capacitance tolerance code K=±10%, J=±5% 2. *0** =terminal form code (refer to table 1) 3. When W=37mm, insulated flexible lead gauge =AWG20; When W=47mm, insulated flexible lead gauge =AWG18. 4. # When the rated voltage is 450Vac, the digit 4~5 is S2. When the class of operation is Class B, the digit 11 is B. Page 4 of 7
Test Method and Performance No. Item Performance Test Method (IEC 60252-1) 1 Solderability (for wire terminals) 2 Terminal strength 3 Vibration 4 Resistance to solder heat (for wire terminals) 5 Damp heat test 6 Endurance test 7 Self-healing test Good quality of tinning There shall be no visible damage There shall be no visible damage Capacitance change: 0.5% High voltage between terminal and case: 2000Vac, 60s, There shall be no permanent breakdown or flashover There shall be no visible damage. The marking shall be legible. The capacitance change 0.5% There shall be no visible damage. The marking shall be legible. Capacitance change: 0.5% High voltage between terminals: 2.0Un, 60s High voltage between terminal and case: 2000Vac, 60s. There shall be no permanent breakd own or flashover. During test, no permanent breakdown, interruption or flashover shall occur Liquids are allowed to wet the surface but not to form droplets Capacitance change: 3% There shall be no visible damage. The marking shall be legible. Change of capacitance: 0.5% Insulation resistor: IR 100s, charge voltage 100Vdc, 60s, temperature 20 C A total of 25 or more than clearings shall be obtained from 10 capacitors tested but if any capacitor shows more than five clearings, only five shall be used in calculating the total. Solder temperature: 245 C ±5 C Immersion time: 2.0s±0.5s Tension: 20N(for wire terminals) 40N(for tabs) Bend: 10N, (only for wire terminals) The terminals shall be bent 2 times in each direction f=10hz to 55Hz a=+/-0.35mm Test duration per axis = 10 frequency cycles (3 axes offset from each other by 90 C), 1 octave per minute, the total times are 135min for 3 axes. Solder temperature:260 C±5 C Immersion time: 10s±1s Temperature: 40 C ±2 C + Humidity: 93 2 3 %RH Duration: 21days Test time: 600 hours, Class C Temperature: maximum permissible capacitor operating temperature (+85 C) Test voltage: 1.25 Un, Continuous Test time: 2000 hours, Class B Temperature: maximum permissible capacitor operating temperature (+85 C) Test voltage: 1.25 Un, Continuous The capacitors shall be subjected to an a.c. voltage of 2.0Un, which is increased at a rate of not more than 200V/min. until five clearings have occurred since the beginning of the test or until the voltage has reach 3.5Un. The voltage shall be decreased to 0.8 times the value at which the fifth clearing occurs or 0.8 times 2.15Un whichever is lower and maintained for 10s. Page 5 of 7
No. Item Performance Test Method (IEC 60252-1) Residual capacitance <1%Cn Note: The capacitor shall be considered as failed if it does not become inoperative (capacitance <1%Cn) within 5 minutes at 10 Un Temperature: five capacitors that have passed the endurance test are pre-heated to 95 C. The remaining five capacitors, having passed the routine test are tested at room temperature. Test voltage: 8 Destruction tests Test simultaneous DC and AC. Apply the constant a.c. voltage of 1.3 Un and measure the initial current (I 1 ). The d.c. voltage shall be raised from zero to a maximum of 10 Un at a rate of 200 V/min until the capacitor becomes inoperative or 10 Un has been reached. 9 Ball-pressure test 10 Glow-wire test 11 Tracking test Quality ensuring test (before shipment): The sample will be cooled in coolin g water for 10s after test. Diameter of impression not exceedin g 2mm Any flame or glowing of the specim en shall extinguish within 30s of wit hdrawing the glow-wire, and any fla ming drops shall not ignite the tissue The electric current of the surface of sample: <0.5A; The sample shall not be ignited Sample: Epoxy Resin piece Sample size: 30mm 30mm Sample thickness: 3mm Temperature: (125±5) C Ball diameter: φ5 Pressure: 20N Testing time: 1h Sample: Epoxy Resin piece Sample size: 30mm 30mm Sample thickness: 3mm The temperature of the tip of the glo w-wire: (550±10) C, I n 0.5A; (850±15) C, I n >0.5A; Testing time: 30s±1s The tissue spread out below the sam ple: 200mm±5mm Sample: Epoxy Resin piece Sample size: 15mm 15mm Sample thickness: 3mm Electrode: Pt Pressure: 1.0N±0.05N Drop of liquid: 50 or the sample has been destroyed. Inspection item (each batch) Appearance inspection Dimensions Inspection level (GB/T 2828.1) IL AQL II 1.5% Capacitance Tangent of the loss angle Dielectric strength II 0.25% Insulation resistance Solderability S-3 2.5% Page 6 of 7
Marking Marking Introduction: sign explain sign explain Brand SH Self-healing capacitor Type S3(P2) Class of safety protection 450VAC Rated voltage CQC Approved and apply standard 3.0μF±5% Rated capacitance and tolerance UL and CUL Approved and apply standard 40/85/21 Climate category TUV Approved and apply standard 50/60Hz Rated frequency DC Making time C Running Class Protected 10,000AFC The protect current of UL and CUL Approved Packing box sizes 1. Out packing box for bulk 2. Inner packing box for bulk L:375mm B:375mm H:265mm L:355mm B:175mm H:118mm Page 7 of 7