PRODUCT AND COMPANY INFORMATION SECTION 1 Company Identification Name: BDMedical Address: 9450 South State Street Sandy UT 84070 FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE, OR ACCIDENT: In the continental US, call: 801.565.2300 (24 hour) For additional information, call: 888.237.2762 (M-F, 8:00 AM-4:30 PM EST) COMPOSITION INFORMATION SECTION 2 Water-based mixture of organic surfactants and Chloroxylenol (PCMX). Chemical Name Percent (wt) CAS Number RTECS Number Chloroxylenol (PCMX) 3.0 88-04-0 ZE6850000 Water & surfactants 97.0 X OSHA REGULATORY STATUS This material is classified as not hazardous under OSHA regulations. While this material is not classified as hazardous under OSHA regulations, this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of the product. This material is classified as hazardous under OSHA regulations. HAZARDS IDENTIFICATION SECTION 3 EMERGENCY OVERVIEW Green Liquid. Presents little or no hazard when spilled. Keep out of eyes, ears, and mouth. POTENTIAL HEALTH EFFECTS Eyes: Overexposure may cause irritation. Skin: Overexposure may cause irritation, defatting, and drying of skin in sensitive individuals. Inhalation: Overexposure may cause irritation. Ingestion: Overexposure may cause irritation. D14519 (Page 1 of 6
Other: FIRST AID MEASURES SECTION 4 Seek medical attention in all cases of overexposure. FIRST AID MEASURES Eyes: Flush thoroughly with copious amounts of water for 15 minutes. Ears: Flush ear with water; repeat several times. Skin: Flush thoroughly with copious amounts of water. Ingestion: Wash out mouth with water. Treat with gastric lavage using milk, egg white, or mild soap. Inhalation: Remove patient from exposure; keep warm and at rest. Note to Physician: Symptomatic treatment and supportive therapy as indicated. For further detail, consult the prescribing information. FIRE FIGHTING MEASURES SECTION 5 Flammability Properties Flash Point / Method: Flammability Limits: (in air % by volume) Autoignition Temperature: Hazardous Combustion Products: Extinguishing Media: Firefighting Instructions: U/K LEL: U/K UEL: U/K U/K U/K Water, foam, or carbon dioxide. Cool fire-exposed containers with water spray. As in any fire, wear full protective clothing and NIOSHapproved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode. ACCIDENTAL RELEASE MEASURES - SECTION 6 Small Spill: Dilute with copious amounts of water and flush to sewer. Large Spill: Absorb spills with sand, earth, or any other suitable material. Transfer to container for disposal. Do not allow to enter drains, D14519 (Page 2 of 6
sewers, or watercourses. Wash the area with water and flush to a sewer serviced by a wastewater treatment facility. HANDLING & STORAGE SECTION 7 Handling: Avoid contact with eyes, ears, and mouth. Storage: Store according to label instructions. Avoid excessive heat (>104 F). EXPOSURE CONTROLS / PERSONAL PROTECTION SECTION 8 Engineering Controls: Personal Protective Equipment Eye/Face Protection: Goggles, full-face shield in addition if splashing is possible. Skin Protection: Respiratory Protection: General Hygiene No other special protective equipment is needed to Considerations: use this product safely when manufacturer s directions are followed. Exposure Guidelines OSHA PEL: U/K ACGIH TLV: U/K PHYSICAL & CHEMICAL PROPERTIES SECTION 9 Physical State: Liquid Appearance: Green Odor: Perfumed Molecular Weight: U/K ph: 7.0 to 8.0 Boiling Point: PCMX: 212 F (100 C) Melting Point: Vapor Pressure (mm Hg): U/K Vapor Density (Air=1): U/K D14519 (Page 3 of 6
Solubility in Water: Soluble Specific Gravity/Density: 1.01-1.03 (H 2 0=1) STABILITY & REACTIVITY SECTION 10 Stability: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition Products: Hazardous Polymerization: Stable under normal temperatures and pressures. Storage above 40 C (104 F) over long periods. Keep from freezing. Strong oxidizing agents. Thermal decomposition may release noxious vapors into the air. In these conditions, selfcontained breathing apparatus should be worn. Will not occur. TOXICOLOGICAL INFORMATION SECTION 11 No human data is available for this product. ECOLOGICAL INFORMATION SECTION 12 Bulk Solution: Product poses no specific environmental problems. DISPOSAL CONSIDERATION SECTION 13 Disposal should be in accordance with local, state, and federal regulations. Empty container retains product residue. TRANSPORT INFORMATION - SECTION 14 Not classified as dangerous for transport. Proper Shipping Name: Hazard Class UN Number Packing Group Required Labels: DOT REQUIREMENTS: D14519 (Page 4 of 6
IATA REQUIREMENTS: IMDG REQUIREMENTS: REGULATORY INFORMATION SECTION 15 OSHA TSCA CERCLA SARA Title III US REGULATIONS OTHER INFORMATION - SECTION 16 Definitions: U/K = Unknown = Not Applicable To the best of our knowledge, the information contained herein is accurate. However, neither Becton Dickinson nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. The possibility exists that the EU will not recognize this MSDS due to the fact that several components of the MSDS are reflective of ANSI Z- 400.1-1998. Although ILO (International Labor Organization) has adopted ANSI Z-400.1-1998, ultimate disposition lies with the competent authority. D14519 (Page 5 of 6
VERSION HISTORY Version Description ECO Number Version Prepared By 2 Routine review by Regulatory. Update to current format including the addition of the Revision number in the header along with new version history table. In the header section update product name to 3% PCMX Antiseptic Foam solution and add Catalog number 372424. In section 1 update company information. Correct company name to BD Medical. Update company address from Franklin Lakes address to the Sandy Sites Unit Address along with the telephone numbers. ECO79793 Rachel LeBlanc Janet Boggess New/1 New version Pre QDMS George Nolan D14519 (Page 6 of 6