haz-mat & rescue products

haz-mat & rescue products

CONTENTS LIFTING BAGS. 0..0. LIFTING BAGS.. CATCH BAGS TOWING AND RECOVERY 4.2. LOW-PRESSURE LIFTING BAGS 0.5 bar (7.3 PSI) 5.3. TOWING AND RECOVERY 6.4. VLB - VEHICLE LIFTING BAG 0.5 bar (7.3 PSI) 8.5. MEDIUM-PRESSURE LIFTING BAGS.0 bar (4.5 PSI) 9.6. Medium-pressure USAR AX SET.9 BAR (28 PSI) 0.7. HIGH-PRESSURE LIFTING BAGS 8 bar (6 psi) system 2 SLK model 2 SLK-L model 3 SBF-K model (flat bag) 4 0 bar (45 psi) system 6 SLK-H model 6 SFB-H model (flat bag) 7.8. INFLATION ACCESSORIES 9.9. THE USAGE OF LIFTING BAGS 20 Photos 2.9. FLAT BAGS VS. CONVENTIONAL LIFTING BAGS 22 2.0. DECON 2.. Inflatable decontamination units 24 2.2. PROPOSED DECONTAMINATION SETS 25 2.3. ACCESSORIES FOR Inflatable decontamination units 26 3.0. RESCUE 3.. RESCUE STRETCHER 28 3.2. RESCUE WALKWAY 29 4. 0. SEALING PRODUCTS Photos 3 4.. INFLATABLE PIPE PLUGS 32 4.2. GULLY SEALING SET 34 4.3. LEAK SEALING LANCE SET 36 4.4. PIPE PLUG KIT 37 4.5. MINI LEAK SEALING BAGS 39 4.6. LARGE LEAK SEALING BAGS 4 4.7. SEALING TUBES 42 4.8. SEALING BANDAGES 43 4.9. VACUUM DRAINAGE BAG 44 4.0. DRAINAGE SEALING BAG 45 4.. DRAINAGE PIPE SEALING BAGS 46 4.2. MEGA LEAK SEALING KIT 47 5.0. WATER TANKS 5.. SELF-SUPPORTING INTERCEPTIVE TANKS 50 5.2. TRANSPORT TANKS 52 5.3. CLOSED RUBBER TANKS 54 5.4. DRINKING WATER TANKS 56 5.5. MOBILE DECANTING UNITS 58 5.6. BERMS 59 5.7. HELICOPTER ONION TANKS 60 6. 0. ABOUT US 6.. WARRANTY 62 6.2. ABOUT US 63 Follow user manual Wear personal protective equipment 2 3

.. CATCH BAGS TOWING AND RECOVERY LOW-PRESSURE LIFTING BAGS 0.5 bar (7.3 PSI). 2. CAMLOCK CLAW Catch Bags are used to catch the vehicle when uprighting it for a soft landing and to prevent secondary tip-over. They are built to prevent dangerous and uncontrolled descent of any vehicle or object. Perfect in combination with Savatech low-pressure lifting bags. Low-pressure lifting bags are used for lifting very large objects. They have special Top Grip pads bonded to the top and bottom of the bag. Top Grip pad offers heavy duty protection from slipping, puncture, abrasion and premature wear. Used for uprighting trucks, rail cars, and other types of vehicles or structures. Good stability in all conditions Special air-release openings Extremely durable Quick assembly and disassembly Lifting height up to 2. m Ideal for towing recovery Special TOP GRIP pads Use on all grounds (rock, glass, metal) CONTROLLERS ADAPTERS Single fitting 0.5 bar (7.3 psi) 55336 Shut-off + safety valve 0.5 bar (7.3 psi) 577465 Inflation Hose 0 m (33 ) 574578 Double fitting 0.5 bar (7.3 psi) 50780 Adapter CLAW/26 529704 Blower 574580 3-way distributor 574579 FKT 4-port - 54563 6-port - 545632 *Other sizes on request ACCESSORIES Compressor BLOWER 545639 Protection PLATE wood+top GRIP 58227 Repair kit 522050 Blind coupling /2 57458 WEDGE 58229 Insertion POLE 58228 INFLATION HOSES POSITIONING ACCESSORIES PROTECTIVE CAP 58703 REPAIR KIT 578468 top cover PVC 579669 RUBBER 58226 type 5 m (6 ) 5 m (49 ) RED RIGID 59574 594222 YELLOW RIGID 595743 59422 BLACK RIGID 595744 594220 GREEN RIGID 596722 586724 4 Working Nominal bottom top type pressure content number height Length Width Length Width Air requirement Max. Inflation height time [cm] / [inch] [cm] / [inch] [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [l] / [cu./ft.] [cm] / [inch] [sec] SCB- 574577 40 / 55 40 / 55 00 / 39 00 / 39 0 / 4 22 / 50 < 0.2 / < 3 700 / 60 2000 / 7 60 / 63 60-90 Working Nominal air max lifting Max. lifting inflation type pressure content requirement capacity height valve number diameter height [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] Thread size MS 45 527296 02 / 40 0 / 4 6 / 35 0.5 / 7.3 368 / 3 55 / 20 4 / 4.4 45 / 8 R /2 -female MS 22 527297 35 / 53 0 / 4 30 / 66 0.5 / 7.3 745 / 62 268 / 93 7 / 7.72 22 / 48 R 3/4 -male MS 20 527298 45 / 57 0 / 4 43 / 95 0.5 / 7.3 3466 / 22 599 / 84 9 / 9.92 20 / 83 R 3/4 -male 5

. 3. TOWING AND RECOVERY TOWING AND RECOVERY. 3. PROPOSED RECOVERY SETS suitable for tunnel recovery PART NUMBER DESCRIPTION LONG HEAVY VEHICLE SET HEAVY VEHICLE SET LIFTING 527296 MS 45 2 2 527298 MS 20 4 2 3 545632 CONTROLLER FKT-6 4 54563 CONTROLLER FKT-4 5 545639 COMPRESSOR/BLOWER 6 586724 INFLATION HOSE (RIGID 5 m (49 )) 6 3 7 522050 REPAIR KIT FOR LOW PRESSURE BAGS 8 58227 PROTECTION PLATE WOOD+TOPGRIP 6 3 CATCHING 9 574577 SCB- 3 2 0 574578 INFLATION HOSE 0 m (33 ) (FOR CATCH BAGS) 3 2 574580 BLOWER 2 574579 THREE-WAY DISTRIBUTOR 3 57458 BLIND COUPLING 4 578468 REPAIR KIT FOR CATCH BAGS 5 58703 PROTECTIVE CAP 3 2 6 58228 INSERTION POLE 3 2 7 58229 WEDGE 2 2 catching with catch bags Lifting with LOW PRESSURE LIFTING BAGS controler specially designed for best efficiency and safety when working with lowpressure lifting bags compressor/blower specially designed for high-flow volumes and optimal pressure for lowpressure lifting bag operation 6 7

. 4. VLB vehicle lifting bag 0.5 bar (7.3 PSI) MEDIUM-PRESSURE LIFTING BAGS.0 bar (4.5 PSI). 5. 26 GEKA Lifting Bag 4 Car is an inflatable bag that comes in handy at replacing flat tyres of passenger vehicles, SUVs, as well as light commercial vehicles. LB4C is a light, compact and robust bag, which is easy to place under a vehicle and is inflated by means of any compressed air source. If compared to a mechanical car lifter, this bag especially excels if the space is limited. The non-inflated bag is less than 5 cm high; without causing any damage it can be easily placed under a vehicle with a flat tyre, as well as under a vehicle with a lowered chassis, or built-in spoilers. Medium-pressure lifting bags provide high lifts. They have a soft footprint which makes them ideal for lifting softer structures since the lifting force is spread over a wider area..0 Perfect for tyre change Simple operation Light, compact and robust Reinforced top and bottom Perfect performance on soft grounds Suitable for high lifts Made from extra durable materials Extra fast inflation and deflation Accessories CONTROLLERS ADAPTERS Single fitting.0 bar (4.5 psi) 55503 Shut-off + safety valve.0 bar (4.5 psi) 55504 Top and bottom reinforced to provide protection from sharp objects Single fitting 0.5 bar (7.3 psi) 58365 Double fitting.0 bar (4.5 psi) 50406 Adapter GEKA/26 5757 VLB Bag inflated 556385 Inflation hose 5 m (6 )- red 76683 Double deadman.0 bar (4.5 psi) - PLASTIC box 5289 ACCESSORIES Repair kit 522050 CARRY-on VALISE (for 2 BAGS) 52483 MA 52485 MB 52486 MC 52487 MD top grip pads can be supplied on request INFLATION HOSES type 5 m (6 ) 0 m (33 ) RED 525662 538935 YELLOW 504063 5987 BLACK 504064 577464 number Length Width weight VLB BAG deflated working pressure Max. lifting capacity Max. lifting HEIGHT [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [t] / [US Tons] [cm] / [inch] VLB BAG 556385 60 / 24 60 / 24 4.2 / 9 0.5 / 7.3.2 /.3 60 / 24 working nominal Air Max lifting Max. lifting Inflation weight pressure content requirement capacity height valve number diameter height [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] Thread size MA 52478 6 / 24 5 / 2 7.5 / 7.0 / 4.5 26 / 4 25 / 9 3 / 3.3 43 / 7 R 3/8 - male MB 52479 76 / 30 5 / 2 2 / 27.0 / 4.5 268 / 9 535 / 9 4.7 / 5.8 59 / 23 R 3/8 - male MC 5248 9 / 36 5 / 2 5 / 33.0 / 4.5 397 / 4 793 / 28 6.7 / 7.39 6 / 24 R 3/8 - male MD 52482 22 / 48 8 / 3 35 / 77.0 / 4.5 68 / 4 2337 / 83 2 / 3.23 00 / 39 R 3/8 - male 8 9

. 6. Medium-pressure USAR AX SET.9 BAR (28 PSI) HIGH-PRESSURE LIFTING BAGS. 7. GEKA.9 Savatech 9-ton USAR Rescue Lift Kit is portable, self-contained lifting system. Originally conceived by the US Air Force Pararescue Jumpers, the GI Lift Kit is a lightweight fast deployment insertion/extraction team lifting system. High-pressure lifting bags are used for lifting the heaviest loads. High-pressure lifting bags exert maximum force in a concentrated area, making them ideal when lifting rigid structures in tight places. Their unique structure also allows use in load shifting, heavy truck or aircraft recovery and different moving situations. Soft footprint Lightweight Fast deployment Use on all grounds (rock, glass, metal) Extremely durable Heavy duty EN 373 certified Thin design Single.9 bar (28 psi) 5549 Inflation hose 3m (0 ), Black 5552 Inflation hose 5 m (6 ), yellow 76685 Inflation distributor, Y part 5550 AX SET Description 525022 Lifting bag AX 2 5549 Single.9 bar (28 psi) 2 5552 Inflation hose 3 m (0 ), Black 2 76685 Inflation hose 5 m (6 ), yellow, 5550 Inflation distributor, Y part 5554 Backpack for AX set 555 Compressed air cylinder 300 bar (4350 psi), 5L (305 cu.in.) 2 523835 Pressure reducer 200/300 bar (2900/4350 psi) 522050 Repair kit Compressed air cylinder 300 bar (4350 psi), 5l (305 cu.in.) 555 Repair kit 522050 Pressure reducer 200/300 bar (2900/4350 psi) 523835 Backpack for Ax set 5554 Max. Working Nominal Air Max.lifting Inflation PART Lifting TYPE Pressure content requirement capacity NUMBER Diameter Height valve height [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] Thread size AX 525022 55 / 22 5 / 2 4.0 / 9.9 / 28 07/ 4 30 / 4.5 / 4.96 45 / 8 R 3/8 - male Unique anti-slip surface Reflective corner markings Clear & distinctive labels Strong manipulation handles Cone-shaped protection edges 0

. 7. HIGH-PRESSURE LIFTING BAGS 8 BAR (6 PSI) HIGH-PRESSURE LIFTING BAGS 8 BAR (6 PSI). 7. 25 safety 25 safety EN 373 certified Stackable up to 2 bags Extra durable Thin design EN 373 certified Stackable up to 2 bags Narrow design Easy manipulation working AIR Max. lifting Max. lifting weight number Length Width Height pressure REQUIREMENT capacity HEIGHT [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] SLK 77973 5 / 6 5 / 6 2.5 / 0.55 /.2 8 / 6 5 / 0.2. /.2 8 / 3. SLK 3 77974 22.5 / 9 22.5 / 9 2.5 /.25 / 3 8 / 6 5 / 0.5 2.7 / 3 3 / 5. SLK 6 77975 30 / 2 30 / 2 2.5 / 2 / 4 8 / 6 42 /.5 5.5 / 6. 6 / 6.3 SLK 0 76734 38 / 5 38 / 5 2.5 / 3,5 / 8 8 / 6 86 / 3.0 0. /. 2 / 8.3 SLK 4 76735 45 / 8 45 / 8 2.5 / 5 / 8 / 6 52 / 5.4 3.5 / 4.9 25 / 9.8 SLK 2 76736 55 / 22 55 / 22 2.5 / 7 / 5 8 / 6 296 / 0.5 2. / 23.2 30 /.8 SLK 25 76737 6 / 24 6 / 24 2.5 / 9 / 20 8 / 6 46 / 4.7 25.2 / 27.7 34 / 3.4 SLK 33 76738 69 / 27 69 / 27 2.5 / / 24 8 / 6 62 / 2.9 33 / 36.3 38 / 5 SLK 45 76739 78 / 3 78 / 3 2.5 / 4 / 3 8 / 6 92 / 32.5 44.6 / 49. 42 / 6.5 SLK 55 76794 87 / 34 87 / 34 2.5 / 8 / 40 8 / 6 305 / 46. 55 / 60.5 47 / 8.5 SLK 70 57324 94,5 / 37 94,5 / 37 2.5 / 22.5 / 50 8 / 6 505 / 53.2 70.4 / 77.4 52 / 20.5 working AIR Max. lifting Max. lifting weight pressure REQUIREMENT capacity HEIGHT number Length Width Height [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] SLK-L 9 59833 45 / 8 30 / 2 2.5 / 3.3 / 7.3 8 / 6 95 / 3.4 8.9 / 9.8 9 / 7.5 SLK-L 3 59834 50 / 20 37.5 / 5 2.5 / 4.5 / 0 8 / 6 70 / 6.0 3.2 / 4.5 23 / 9. SLK-L 20 59837 75 / 30 37.5 / 5 2.5 / 6.5 / 4.3 8 / 6 270 / 9.5 20.2 / 22.2 23 / 9. SLK-L 24 77983 02 / 40 32 / 3 2.5 / 7.8 / 7.2 8 / 6 220 / 7.8 24 / 26.4 20 / 7.9 LIFTING Height [mm] / [inch] SLK 70 25 / 75 / 3 25 / 5 75 / 7 225 / 9 275 / 325 / 3 375 / 5 425 / 7 475 / 9 525 / 2 70 / 66 LIFTING Height [mm] / [inch] 60 / 66 25 / 75 / 3 25 / 5 75 / 7 225 / 9 25 / 27.5 SLK 55 SLK 45 SLK 33 SLK 25 SLK 2 SLK 4 SLK 0 SLK 6 SLK 3 SLK 50 / 55 40 / 44 30 / 33 20 / 22 0 / LIFTING CAPACITY [t] / [US Tons] SLK-L 24 20 / 22 SLK-L 20 5 / 6.5 SLK-L 3 0 / SLK-L 9 5 / 5.5 0 / 0 0 / 0 LIFTING CAPACITY [t] / [US Tons] 2 3

. 7. HIGH-PRESSURE LIFTING BAGS 8 BAR (6 PSI) (FLAT BAGS) ACCESSORIES FOR HIGH-PRESSURE LIFTING BAGS 8 BAR (6 PSI). 7. 25 safety INFLATION HOSES type 5 m (6 ) 0 m (33 ) RED 569 5693 YELLOW 57967 57968 BLUE 5692 5694 GREY 52937 52938 CONTROLLERS EN 373 certified Stackable up to 3 bags Superb stability Flat surface Single fitting 8 bar (6 psi) 7668 Hand-held double deadman 8 bar (6 psi) 59820 number Length Width Height weight working pressure AIR Max. lifting REQUIREMENT capacity Max. lifting height Max. lifting capacity at Max. lifting height Double fitting 8 bar (6 psi) 76682 Double deadman 8 bar (6 psi) PLASTIC BOX 52826 Double deadman 8 bar (6 psi) LED LIGHTS, PLASTIC BOX 576803 [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] [t] / [US Tons] SFB-K 7/7 59883 55 / 22 55 / 22 2.5 / 7.3 / 6 8 / 6 224 / 7.9 2. / 23.2 7 / 6.7 6.7 / 7.4 SFB-K 0/7 59884 6 / 24 6 / 24 2.5 / 9.2 / 20 8 / 6 350 / 2.4 25.2 / 27.7 7 / 6.7 9.5 / 0.5 SFB-K 20/7 59885 78 / 3 78 / 3 2.5 / 4.5 / 32 8 / 6 520 / 8.4 44.6 / 49. 7 / 6.7 20.2 / 22.2 SFB-K 33/7 59886 9.5 / 36 9.5 / 36 2.5 / 20.6 / 45 8 / 6 80 / 28.6 64 / 70.4 7 / 6.7 33.3 / 36.6 Hand-held single deadman 8 bar (6 psi) 5989 Double deadman 8 bar (6 psi) METAL BOX 52832 Double 8 bar (6 psi) CASE BOX 579558 AccessoRIES (SUITABLE FOR FLAT BAGS only) Other accessories Triple deadman 8 bar (6 psi) - METAL BOX 54424 Set of TRIPLE flat bag connectors, Orange (4 pcs per set) 530545 Set of DUAL flat bag connectors, Yellow (4 pcs per set) 529480 Hose with shut-off valve 0,5 m (.6 ) 525278 Hose with shut-off + safety valve 8 bar (6 psi), 0 m (33 ) 544 Foot pump 8 bar (6 psi) 538320 SFB-K 33/7 25 / LIFTING Height [mm] / [inch] 75 / 3 25 / 5 75 / 7 60 / 66 Shut-off + safety valve 8 bar (6 psi) 5905 Inflation distributor m (3, yellow 522999 Pressure reducer 8 bar (6 psi) 200/300 bar (2900/4350 psi) DIN - 523835 CGA - 595820 SFB-K 20/7 SFB-K 0/7 SFB-K 7/7 50 / 55 40 / 44 30 / 33 20 / 22 0 / LIFTING CAPACITY [t] / [US Tons] SINGLE STAGE REGULATOR 8 bar (6 psi) 7228-CGA-8 bar SLK 77973 SLK 3 77974 MINI LIFTING SET Portable case 52887 Yellow hose 57967 compressed Air cylinder 523002 4 0 / 0 SLK 6 77975 Special pressure reducer system 523000 Inflation distributor 522999 5

. 7. HIGH-PRESSURE LIFTING BAGS 0 bar (45 psi) 25-0 25-0 HIGH-PRESSURE LIFTING BAGS 0 BAR (45 psi) (FLAT BAGS). 7. EN 373 certified Increased lifting capacity Compatible with 8 bar (6 psi) bags Heavy duty EN 373 certified Increased lifting capacity Compatible with 8 bar (6 psi) acessories Heavy duty working AIR Max. lifting Max. lifting weight pressure REQUIREMENT capacity height number Length Width Height [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] SLK- H 29240 5 / 6 5 / 6 2.5 / 0.55 /.2 0 / 45 7 / 0.3.2 /.3 8 / 3. SLK- H 4 2924 22.5 / 9 22.5 / 9 2.5 /.25 / 3 0 / 45 9 / 0.7 3.3 / 3.6 3 / 5. SLK- H 7 29242 30 / 2 30 / 2 2.5 / 2 / 4 0 / 45 52 /.9 6.8 / 7.5 6 / 6.3 SLK- H 2 29243 38 / 5 38 / 5 2.5 / 3.5 / 8 0 / 45 06 / 3.8 2. / 3.3 2 / 8.3 SLK- H 7 29244 45 / 8 45 / 8 2.5 / 5 / 0 / 45 86 / 6.6 6.6 / 8.3 25 / 9.3 SLK- H 26 29245 55 / 22 55 / 22 2.5 / 7 / 5 0 / 45 362 / 2.8 26.3 / 28.9 30 /.8 SLK- H 32 29246 6 / 24 6 / 24 2.5 / 9 / 20 0 / 45 508 / 8.0 3.8 / 35 34 / 3.4 SLK- H 4 29247 69 / 27 69 / 27 2.5 / / 24 0 / 45 759 / 26.8 4.3 / 45.4 38 / 5 SLK- H 56 29248 78 / 3 78 / 3 2.5 / 4. / 3 0 / 45 22 / 39.7 55.8 / 6.4 42 / 6.5 SLK- H 69 29249 87 / 34 87 / 34 2.5 / 8.2 / 40 0 / 45 595 / 56.4 68.7 / 75.6 47 / 8.5 SLK- H 88 29250 94.5 / 37 94.5 / 37 2.5 / 22.7/ 50 0 / 45 650 / 58.3 88 / 96.8 52 / 20.5 LIFTING Height [mm] / [inch] number Length Width Height weight working pressure AIR REQUIREMENT Max. lifting capacity Max. lifting height Max. lifting capacity at Max. lifting height [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] [t] / [US Tons] [cm] / [inch] [t] / [US Tons] SFB-H 8/7 29294 55 / 22 55 / 22 2.5 / 7.4 /6 0 / 45 280 / 9.9 26.4 / 29 7 / 6.7 8. / 8.9 SFB-H 2/7 29295 6 / 24 6 / 24 2.5 / 9.2 / 20 0 / 45 437.5 / 5.5 3.5 / 34.7 7 / 6.7.9 / 3. SFB-H 25/7 29296 78 / 30 78 / 30 2.5 / 4.5 / 32 0 / 45 650 / 23 55.8 / 6.3 7 / 6.7 25.3 / 27.8 SFB-H 42/7 29297 9.5 / 36 9.5 / 36 2.5 / 20.5 / 45 0 / 45 02.5 / 35.8 80 / 88 7 / 6.7 4.6 / 45.8 TRIPLE deadman 0 bar (45 psi) METAL BOX 29298 Accessories (SUITABLE FOR FLAT BAGS only) Set of TRIPLE flat bag connectors, Orange (4 pcs per set) 530545 Set of DUAL flat bag connectors, Yellow (4 pcs per set) 529480 25 / 75 / 3 25 / 5 75 / 7 225 / 9 275 / 325 / 3 375 / 5 425 / 7 475 / 9 500 / 20 90 / 99 LIFTING Height [mm] / [inch] SLK-H 88 25 / 50 / 2 00 / 4 70 / 6.7 SLK-H 69 SLK-H 56 SLK-H 4 SLK-H 32 SLK-H 26 SLK-H 7 SLK-H 2 SLK-H 7 SLK-H 4 SLK-H 80 / 88 70 / 66 60 / 66 50 / 55 40 / 44 30 / 33 20 / 22 LIFTING CAPACITY [t] / [US Tons] 80 / 88 SFB-H 42/7 70 / 66 60 / 66 SFB-H 25/7 50 / 55 40 / 44 30 / 33 SFB-H 2/7 SFB-H 8/7 20 / 22 0 / 0 / 0 / 0 0 / 0 LIFTING CAPACITY [t] / [US Tons] 6 7

. 7. ACCESSORIES FOR HIGH-PRESSURE LIFTING BAGS 0 bar (45 psi) ACCESSORIES. 8. INFLATION HOSES Inflation accessories have been designed for precision control, high reliability and long life. They are used with all of our lifting bags from the source of air to s. A L L type 5 m (6 ) 0 m (33 ) RED 2926 29265 YELLOW 29260 29264 BLUE 29262 29266 GREY 29263 29267 LIFTING BAGS CONTROLLERS compressed Air cylinder 300 bar (4350 psi), 6L (366 cu.in.) 528746 carry-on valise for compressed Air cylinder 598 Universal connector kit 59809 Single fitting 0 bar (45 psi) 29258 Hand-held double deadman 0 bar (45 psi) 29257 Double 0 bar (45 psi) CASE BOX 579559 Truck tyre valve connection 59806 Truck tyre valve 59805 Compressed air mains 59808 Double fitting 0 bar (45 psi) 29259 Double deadman 0 bar (45 psi) PLASTIC BOX 29255 Double deadman 0 bar (45 psi) LED LIGHTS, PLASTIC BOX 29286 Truck tyre inflator adapter 59807 Dual connector for compressed air cylinders 529383 Triple connector for compressed air cylinders 529384 Hand-held single deadman 0 bar (45 psi) 29256 Double deadman 0 bar (45 psi) METAL BOX 29254 SINGLE STAGE REGULATOR CGA, 0 bar (45 psi) 7228-CGA-0 bar Shut-off + safety valve 0 bar (45 psi) 29282 OTHER ACCESSORIES Simple switch to 8 bar (6 psi) accessories Adapter 8 bar (6 psi) 0 bar (45 psi) 29284 Pressure reducer 0 bar (45 psi) 300 bar (4350 psi) DIN - 5573 CGA - 596586 Hose with shut-off + safety valve 0 bar (45 psi), 0 m (33 ) 29290 Truck compressed air connection 529005 Safety carrier Rack-Two cylinder 6L (366 cu.in.) modul-trolley system 542868 Truck compressed air connectionblind coupling 529006 Safety carrier Rack-Four cylinder 6L (366 cu.in.) modul-trolley system 542872 Adapter for construction site compressor 529704 LOADING PLATES LOAD PLATE # 350 556308 LOAD PLATE # 420 556309 LOAD PLATE # 520 55630 LOAD PLATE # 670 5563 All above accessories are suitable for EU market, US versions available upon request! foot pump - 0 bar (45 psi) 576565 Inflation distributor 0 bar (45 psi) m (3 ), yellow 589334 Hose with shut-off valve 0 bar (45 psi) 0,5 m (.5 ) 589333 8 9

. 9. THE USAGE OF LIFTING BAGS PHOtos. 9. Conventional and flat lifting bags are intended for lifting, lowering, positioning, spreading, pushing and moving of loads weighing up to 88,000 kg. They are mainly used in rescue operations and industrial lifting. Follow user manual Inflation with compressed air Inflation with water Road assistance Spreading LIFTING SPREADING Rerailing Earthquake recovery FIXING PUSHING IMPORTANT note Non-compliance with the instructions can result in various injuries. Carefully read the instructions for operation before using the lifting bag. www.savatech.com/manuals/index.htm www.savatech.eu/environmental-protection-and-rescue/manual Vehicle uprighting Object moving 20 2

. 9. FLAT BAGS VS. CONVENTIONAL LIFTING BAGS decontamination 2. 0. Flat Bags conventional bags Stack 3 bags on the top of each other Stack 2 bags on the top of each other ADVANTAGES OF FLAT BAGS Greater contact surface and stability Increased height Flat Bag Conventional Bag Flat Bag Conventional Bag Lifting capacity Flat Bag Lifting capacity Conventional Bag Lifting height Lifting height What is unique about the Savatech Flat bags is that they start out flat and remain flat even when fully inflated (flat working surface). With the Savatech lifting bags at full inflation height, only the sides curl. The bag doesn t crown as conventional high-pressure lifting bags do. Follow user manual Wear personal protective equipment 22 23

Leafield 2.. Inflatable decontamination units Inflatable decontamination units 2. 2. PROPOSED DECONTAMINATION SETS Inflatable decontamination units are used for emergency decontamination in cases of exposure to hazardous waste materials, chemical spills, as well as chemical and biological WMDs. Commonly used as a standard equipment for Hazmat response teams. Rapid assembly Integrated latex gloves One person to deploy Standard equipment - supplied together with each unit INSIDE View Integrated water distribution system Hand held shower (two replaceable shower heads) Integrated gloves, nozzels and shower system SINGLE AMANDA Entrance/ Exit BIG MARTHA Entrance/ Exit Front 600 (5.3 ) 600 (5.3 ) Front 600 (5.3 ) 600 (5.3 ) 2400 (7.9 ) 2400 (7.9 ) Side Side Removable/replacable shower curtain and bottom Entrance/ Exit Entrance/ Exit Top 600 (5.3 ) Top 600 (5.3 ) 500 (4.9 ) 600 (5.3 ) 2040 (6.7 ) PART NUMBER DESCRIPTION CABIN XL SET CABIN L SET QUICK M SET QUICK S SET 579703 DECONTAMINATION UNIT BIG MARTHA 2 579702 DECONTAMINATION UNIT SINGLE AMANDA 3 55378 BERM BS 302 4 55375 BERM BS 52 5 553288 BERMINI 200 6 579625 YELLOW DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 7 579626 RED DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 8 579628 GREEN DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 9 579638 YELLOW DECONTAMINATION MAT 5 x5 m (6 x 6 ) 0 578373 RUBBER DECONTAMINATION MAT 2 2 3 3 579577 SUBMERSIBLE PUMP 2 2 57958 PUMP TRAY 2 3 579682 RIGID HOSE, STORZ D - 0 m (33 ) 4 579684 RIGID HOSE, STORZ D - 3 m (0 ) 2 5 579680 T-PIECE 3 X STORZ D 6 579690 TANK FOR CONTAMINATED WATER ZRP500 7 579688 TANK FOR CONTAMINATED WATER ZRP000 8 57968 ADAPTER STORZ C TO D 9 57966 DECONTAMINATION RING 20 579654 HANDHELD NOZZLE, STORZ D 2 57964 DISTRIBUTOR - STORZ C TO 2 X STORZ D 22 579657 FIRE HOSE - STORZ D 2 2 23 579639 HAND SPRAYER 2L (0.5 US gal) 2 2 24 579640 HAND SPRAYER 0L (2.6 US gal) 25 57962 BRUSH 2 2 26 579730 REPAIR KIT 27 579685 SPARE GLOVES (PAIR) 2 28 523835 PRESSURE REDUCER 29 528746 AIR CYLINDER 30 549880 BLOWER * * * alternative source of air supply (instead of #28 and #29) CABIN XL SET Repair kit 300 (0 ) INSIDE View 5x Integrated full-coned 20 angle nozzles (covers the whole inner area) with valve inside for opening/closing Outside View Front Basin Front Basin Storz D coupling for water supply QUICK M SET 2 x Quick coupling for dewatering of distribution system DIMENSIONS TYPE PART NUMBER OUTER INNER PACKING LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT WEIGHT WORKING AIR PRESSURE REQUIREMENT [cm] / [cm] / [cm] / [cm] / [cm] / [cm] / [cm] / [cm] / [cm] / [kg] / [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [lbs] [bar] / [psi] [l] / [cu./ft.] SINGLE AMANDA 579702 60 / 63 60 / 63 240 / 94 6 / 46 6 / 46 220 / 87 20 / 47 80 / 32 90 / 35 37/ 82 0.3 / 4 020 / 36 BIG MARTHA 579703 30 / 22 204 / 80 240 / 94 6 / 46 6 / 46 220 / 87 20 / 47 80 / 32 90 / 35 40/ 88 0.3 / 4 270 / 45 24 25

2. 3. ACCESSORIES FOR Inflatable decontamination units RESCUE 3. 0. BERM BS 302 55378 BERM BS 202 579650 BERM BS 52 55375 BERMINI 200 553288 YELLOW DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 579625 RED DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 579626 GREEN DECONTAMINATION MAT 3 x 2,5 m (0 x 8 ) 579628 YELLOW DECONTAMINATION MAT 5x5 m (6 x 6 ) 579638 RUBBER DECONTAMINATION MAT 578373 SUBMERSIBLE PUMP 579577 PUMP TRAY 57958 RIGID HOSE, STORZ D - 0 m (33 ) 579682 RIGID HOSE, STORZ D - 3 m (0 ) 579684 T-PIECE 3 X STORZ D 579680 TANK FOR CONTAMINATED WATER ZRP500 579690 TANK FOR CONTAMINATED WATER ZRP000 579688 ADAPTER STORZ C TO D 57968 DECONTAMINATION RING 57966 HANDHELD NOZZLE, STORZ D 579654 DISTRIBUTOR - STORZ C TO 2 X STORZ D 57964 FIRE HOSE - STORZ D 579657 HAND SPRAYER 2L (0.5 US gal) 579639 HAND SPRAYER 0L (2.6 US gal) 579640 BRUSH 57962 REPAIR KIT 579730 SPARE GLOVES (PAIR) 579685 PRESSURE REDUCER 523835 AIR CYLINDER 528746 BLOWER 549880 Follow user manual Wear personal protective equipment 26 Red/white tape 579678 Foldable cone sign 579677 Set of sign tables 57969 27

3.. RESCUE STRETCHER RESCUE WALKWAY 3. 2. The inflatable stretcher is designed for use in all conditions and it provides total safety and protection of the wounded during a rescue action ashore, in the water or air. Its compact design assures simple loading in a vehicle, a boat, a helicopter or a plane. The rescue walkway is an inflatable rescue path used on unstable terrain for casualty recovery operations. It is used by fire brigades and other rescue units. The design of the walkway assures superb stability in all circumstances and can be used either as a raft or a work platform on ice, water, sand, to name just a few. It can be easily inflated and deployed. Floatable design Excellent stability Used in all circumstances Padded grip handles Rapidly unrolled, inflated and emptied Used as a raft Used as a working platform Excellent stability STANDARD EQUIPMENT supplied together with A strecher STANDARD EQUIPMENT supplied together with A walkway Anti-slip surface Transport bag Inflation hose Inflation hose Filling/discharge port and safety valve Carrying/holding line Reflective edge markings Optional equipment purchased separately Optional equipment purchased separately Hand pump 6L (366 cu.in.) - 537734 4L (244 cu.in.) - 539072 Repair kit 53576 Transport bag ATP 5-584666 ATP 0-583850 ATP 5-584667 Hand pump 6L (366 cu.in.) - 537734 4L (244 cu.in.) - 539072 Repair kit 587332 note Lengths of walkways can be adapted to customer requirements. Working Carrying Air NUMBER Length Width Height Pressure capacity requirement [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [kg] / [lbs] [l] / [cu./ft.] STRETCHER 524533 240 / 94 72 / 28 37 / 5 7 / 38 0.5 / 7.3 50 / 33 750 / 27 Working Carrying Air Pressure capacity requirement NUMBER Length Width Height [cm] / [ft] [cm] / [ft] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [kg] / [lbs] [l] / [cu./ft.] ATP 5 5823 500 / 6.4 65 / 5.4 5 / 6 34 / 75 0.5 / 7.3 000 / 2205 860 / 66 ATP 0 58232 000 / 32.8 65 / 5.4 5 / 6 66 / 46 0.5 / 7.3 2000 / 4409 3720 / 3 ATP 5 58233 500 / 49.2 65 / 5.4 5 / 6 00 / 22 0.5 / 7.3 3000 / 664 5570 / 97 28 29

4. 0. SEALING PRODUCTS Sealing Products - PHOTOS 4.0. Blocking Drainage Joint sealing Emergency sealing Follow user manual Wear personal protective equipment Tank sealing Pipe sealing 30 3

4.. INFLATABLE PIPE PLUGS INFLATABLE PIPE PLUGS 4.. BAR (22 psi); 2.5 BAR (36 psi).5 BAR (22 psi) type 26 type 4 Inflatable pipe plugs reinforced with Aramid cord are noted for a wide application range. They can be used in different situations, where a pipe needs to be blocked or a bypass made. : PLUGY (Blocking Plugs) Size Usage Range Min. Max. diameter diameter Working Pressure Deflated Plug dimensions Diameter Length Eye Bolt M Thread Inflation Valve Flexible design Aramid cord reinforced Superior grip surface A wide usage range [mm] / [inch] [mm] / [inch] [kg] / [lbs] [bar] / [psi] [mm] / [inch] [mm] / [inch] Thread size PLUGY 40-70 59423 40 /.5 70 / 2.8 0.3 / 0.7 2.5 / 36 35 /.4 95 / 7.7 / R /4 PLUGY 70-50 59424 70 / 2.8 50 / 6 0.6 /.3 2.5 / 36 68 / 2.7 335 / 3 / R /4 PLUGY 00-200 6047 00 / 4 200 / 8. / 2.4 2.5 / 36 92 / 3.6 535 / 2 6 R /4 PLUGY 50-200 526850 50 / 6 200 / 8.8 / 4 2.5 / 36 42 / 5.6 385 / 5 8 R /4 PLUGY 50-300 6048 50 / 6 300 / 2.9 / 4 2.5 / 36 42 / 5.6 575 / 23 8 R /4 Poly lift hose 0 m (33 ), bar (4.5 psi); 2.5 bar (36 psi) 60958 Poly lift hose 0 m (33 ),.5 bar (22 psi) 579623 PLUGY 200-400 6049 200 / 8 400 / 6 3.0 / 7 2.5 / 36 92 / 7.6 635 / 25 8 R /4 PLUGY 300-525 60599 300 / 2 525 2 6.0 / 4 2.5 / 36 272 / 0.7 675 / 27 8 R /4 PLUGY 350-600 60422 350 / 4 600 / 24 8.4 / 9 2.5 / 36 322 / 2.7 865 / 34 0 R /4 PLUGY 375-750 60606 375 / 6 750 / 30 0.9 / 24 2.5 / 36 342 / 3.5 085 / 43 0 R /4 PLUGY 500-800 60453 500 / 20 800 / 32 7.3 / 39 2.5 / 36 472 / 8.6 85 / 47 0 R /4 PLUGY 500-000 53030 500 / 20 000 / 40 7.3 / 39.5 / 22 472 / 8.6 85 / 47 0 R /4 type 0 m (33 ) RED 2.5 bar (36 psi) 74268 BLUE 2.5 bar (36 psi) 7248 PLUGY 600-200 530302 600 / 24 200 / 48 39.0 / 86.5 / 22 574 / 22.6 500 / 60 0 2 R 3/8 PLUGY 750-500 78959 750 / 30 500 / 60 65.0 / 43.0 / 5 600 / 23.6 2300 / 9 0 2 R /4 PLUGY 800-800 53588 800 / 32 800 / 72 05.0 / 23.0 / 5 600 / 23.6 2960 / 7 0 2 R /4 YELLOW 2.5 bar (36 psi) 76688 RED.5 bar (22 psi) 529665 BLUE.5 bar (22 psi) 530372 YELLOW.5 bar (22 psi) 579624 Back pressure measured in A dry iron pipe (bar/psi) Single fitting 2.5 bar (36 psi) 6030 Single fitting.5 bar (22 psi) 529663 Single fitting.0 bar (4.5 psi) 74653 Pipe Diameter [mm] / [inch] Size 40 / 70 / 00 / 50 / 200 / 250 / 300 / 350 / 400 / 500 / 600 / 800 / 000 / 200 / 300 / 400 / 500 / 600 / 700 / 800 /.5 2.8 4 6 8 0 2 4 6 20 24 32 40 48 5 55 60 63 67 72 40-70 2.0/29.2/7 70-50 2.2/32.7/24.5.3/9 00-200 2.2/32.7/24.5.3/9 50-200 2.0/29.5/22 50-300 2.2/32 2.0/29.4/20.2 / 7 200-400 2.2/32 2.0/29.7/24.5.5/22.2/7 300-525 2.0 / 29.7/24.5.5/22.2/7 350-600 2./30.5.9/27.5.6/23.3 / 9 375-750 2.0/29.7/24.5.4/20 500-800.8/26.4/20./6 500-000.0/5 0.8/.5 0.6/8.7 0.5/7.2 600-200.0/5 0.7/0 0.6/8.7 0.5/7.2 750-500.0/5 0.9/3 0.7/0 0.6/8.7 0.5/7.2 0.4/5.8 800-800.0/5.0/5 0.8/.5 0.7/0 0.6/8.7 0.5/7.2 0.5/7.2 0.4/5.8 0.4/5.8 : PLUGSY (BYPASS PLUGS) Size Usage Range Working Min. Max. pressure diameter diameter Deflated Plug dimensions Inflation Bypass Eye Bolt M Valve diameter Diameter Length Thread [mm] / [inch] [mm] / [inch] [kg] / [lbs] [bar] / [psi] [mm] / [inch] [mm] / [inch] Thread size (female) PLUGSY 70-50 526849 70 / 3 50 / 6.7 / 3.7 2.5 / 36 68 / 2.7 350 / 4 / R /8 /2 PLUGSY 00-200 60429 00 / 4 200 / 8 2.6 / 5.8 2.5 / 36 92 / 3.6 550 / 22 6 R /4 PLUGSY 50-200 52685 50 / 6 200 / 8 3.2 / 7. 2.5 / 36 42 / 5.6 420 / 7 8 R /4 PLUGSY 50-300 60432 50 / 6 300 / 2 4.4 / 0 2.5 / 36 42 / 5.6 590 / 23 8 R /4 PLUGSY 200-400 60434 200 / 8 400 / 6 6.3 / 4 2.5 / 36 92 / 7.6 635 / 25 8 R /4 2 PLUGSY 300-525 60630 300 / 2 525 / 2.9 / 26 2.5 / 36 272 / 0.7 675 / 27 8 R /4 2 PLUGSY 350-600 60440 350 / 4 600 / 24 6.6 / 37 2.5 / 36 322 / 2.7 865 / 34 0 R /4 2 PLUGSY 375-750 60632 375 / 5 750 / 30 9.7 / 43 2.5 / 36 342 / 3.5 085 / 43 0 R /4 2 PLUGSY 500-800 60454 500 / 20 800 / 32 3.3 / 69 2.5 / 36 472 / 8.6 85 / 47 0 R /4 2 PLUGSY 500-000 530303 500 / 20 000 / 40 3.3 / 69.5 / 22 472 / 8.6 85 / 47 0 R /4 2 PLUGSY 600-200 530304 600 / 24 200 / 48 46.0 / 0.5 / 22 574 / 22.6 500 / 60 0 2 R 3/8 4 PLUGSY 750-500 78960 750 / 30 500 / 60 75.0 / 65.0 / 5 600 / 23.6 2300 / 9 0 2 R /4 4 PLUGSY 800-800 535882 800 / 32 800 / 72 7.0 / 258.0 / 5 600 / 23.6 2960 / 7 0 2 R /4 4 32 33

4. 2. GULLY SEALING SET GULLY SEALING SET 4. 2. 26 Gully set 300-500 The storm-drain sealing set is used to quickly seal roadside storm-drains in the event of chemical spill and to keep contaminates out of drainage system. Used as a standard equipment by first response units. 52857 Description Gully plug 300-500 0.5 bar (7.3 psi) with inflation hose 2 m (6.6 ) and rope 2 m (6.6 ) Quick inflation Easy positioning High resistance to chemicals Used by first response units 529385 Inflation and safety device with finger-tight connector, pressure reducer, safety valve 0.5 bar (7.3 psi), pressure gauge and safety coupling Portable case 52887 Gully set 00-50 52857 528875 528744 Description Gully plug 00-50 2.5 bar (36 psi) with inflation hose 2.5 m (8 ) and rope 2.5 m (8 ) Foot pump with safety valve 2.5 bar (36 psi) Positioning rod,.5 m (5 ) 3-part 4 523002 52887 Compressed air cylinder 200 bar (2900 psi), L (6 cu.in.) Portable case 2 609 x 409 x 40 mm (24 x 6 x 5,5 ) Gully plug 300-500 0.5 bar (7.3 psi) with inflation hose 2 m (6.6 ) and rope 2 m (6.6 ) 52857 Portable case 52887 52887 Portable case 2 609 x 409 x 40 mm (24 x 6 x 5,5 ) Gully plug 00-50 2.5 bar (36 psi) with inflation hose 2.5 m (8 ) and rope 2.5 m (8 ) 52857 compressed Air cylinder 523002 Inflation and safety device 529385 Positioning rod 528744 Foot pump 528875 Size Usage Range Deflated Plug dimensions Rubber body Working Inflation Max. Pressure Valve Min. diameter Diameter Length Length diameter [mm] / [inch] [mm] / [inch] [kg] / [lbs] [bar] / [psi] [mm] / [inch] [mm] / [inch] [mm] / [inch] Thread size GULLY 00-50 52857 00 / 4 50 / 6 0.5 / 2.5 / 36 86 / 3.4 200 / 8 65 / 7 R /4" GULLY 300-500 52857 300 / 2 500 / 20 3.8 / 8 0.5 / 7.3 274 / 385 / 5 350 / 4 R /4" 34 35

4. 3. leak sealing lance set PIPE PLUG kit 4. 4. 4 The leak sealing lance set can seal holes at a distance with a remote placement and inflation lance. Sealing wedges work well in quick sealing of tanks that have been punctured by a fork-lift blade. Sealing cones work well in sealing of round hole punctures. The pipe plug kit consists of oil-resistant plugs with electrostatic and spark resistant accessories. It is used by first response units for sealing pipes of different sizes or other round holes in tanks, barrels, etc. Easy handling Quick sealing Low air requirement Superior grip surface Oil-resistant plugs Electrostatic and spark protected parts Corrosion-resistant parts Used by first response units leak sealing lance set Description pipe plug kit 528386 Wedge-shaped sealing bag type Push and inflation rod 52869 Shut-off unit 52950 Foot pump 528873 Cone-shaped sealing bag 528389 Wedge-shaped sealing bag 528386 Wedge-shaped sealing bag 2 528387 Portable case 532632 Splash disc 529087 Push and inflation rod, 35 cm (4 ), chain, deflation nipple 52868 Wedge-shaped sealing bag 3 528388 528387 528388 528389 52868 52869 Wedge-shaped sealing bag type 2 Wedge-shaped sealing bag type 3 Cone-shaped sealing bag Push and inflation rod, 35 cm (4 ), chain, deflation nipple Push and inflation rod, 35 cm (4 ) 52950 Shut-off unit 528873 532632 Foot pump with safety valve.5 bar (22 psi) Portable case 470 x 360 x 20 mm (8,5 x 4 x 5 ) 529087 Splash disc 3 Pneumatic plug S4/6 C 523307 Pneumatic plug Z4/6 C 523296 Pneumatic plug Z3/4 C 523294 Pneumatic plug S3/4 C 523304 Pneumatic plug Z /2 C 523290 Pneumatic plug Z C 523289 Hand pump - mini 54960 Portable case 54227 Controlling pressure gauge - up to 3 bar (44 psi) 58008 Bag of corks 54958 ElLiptical Plugy G3 00-60 C 542490 ElLiptical Plugy G2 80-30 C 542489 ELliptical Plugy G 50-80 C 542488 Static discharge kit 54957 Size Usage Range Working Deflated Plug dimensions Height Width Pressure Length Width Height Inflation Valve Tyre valve extension hose m (3 ) 5495 WEDGE-SHAPED SEALING BAG TYPE 528386 WEDGE-SHAPED SEALING BAG TYPE 2 528387 WEDGE-SHAPED SEALING BAG TYPE 3 528388 [mm] / [inch] [mm] / [inch] [kg] / [lbs] [bar] / [psi] [mm] / [inch] [mm] / [inch] [mm] / [inch] Thread size 5-45 / 60-80 / 0.6-.8 2.4-3 0.3 / 0.7.5 / 22 230 / 9 60 / 2.4 50 / 2 R /4 5-45 / 80-0 / 0.6-2.8 3-4 0.4 / 0.9.5 / 22 230 / 9 80 / 3 55 / 2.2 R /4 30-60 / 0-70 /.2-2.4 4-7 0.5 /..5 / 22 230 / 9 0 / 4 70 / 3 R /4 CONE-SHAPED SEALING BAG 528389 Ø 30-90 / Ø.2-3.5 0.3 / 0.7.5 / 22 230 / 9 Ø 65 / Ø 2.6 Ø 7 / Ø 0.3 R /4 Shut-off valve R /8 54952 Shut-off valve R /2 54953 Pneumatic plug S2 C 523302 Inflation Hose 3 m (0 ), antistatic 55285 Pneumatic plug Z2/3 C 523292 36 37

4. 4. PIPE PLUG KIT MINI LEAK SEALING BAGS 4. 5. 4 The pipe plug KIT consists of: Description 542488 Elliptical Plugy G 50-80 C 542489 Elliptical Plugy G2 80-30 C Mini leak sealing bags are used for sealing leaks in small tanks and barrels. Simply strap the bag to the container or pipe and inflate to initiate a seal. 542490 Elliptical Plugy G3 00-60 C 523289 Pneumatic plug type Z C 523290 Pneumatic plug type Z /2 C 523292 Pneumatic plug type Z2/3 C 523294 Pneumatic plug type Z3/4 C 523296 Pneumatic plug type Z4/6 C Flexible design Easy positioning Used by first response unit Low air requirement 523302 Pneumatic plug type S2 C 523304 Pneumatic plug type S3/4 C 523307 Pneumatic plug type S4/6 C 5495 Tyre valve extension hose m (3 ) 2 55285 Inflation hose 3 m (0 ), antistatic 54957 Static discharge kit 54960 Hand pump - mini 54952 Shut-off valve R /8 54953 Shut-off valve R /2 Description 78082 T 78096 T2 78099 T3 528873 6067 Foot-operated pump with safety valve.5 bar (22 psi) Fastening belts, 50 cm (5 ) long, yellow 2 MINI LEAK SEALING BAGS SET Portable case 52887 54958 Bag of corks 58008 Controlling pressure gauge - up to 3 bar (44 psi) 54227 Portable case type 3, 609 x 409 x 40 mm (24 x 6 x 5,5 ) with foam 6069 52887 Fastening belts, 300 cm (0 ) long, yellow Portable case 2 609 x 409 x 40 mm (24 x 6 x 5,5 ) 3 Deflated Plug Size Usage Range Working dimensions Inflation Bypass Min. Max. Pressure Rubber Valve diameter Diameter diameter diameter body length [mm] / [inch] [mm] / [inch] [kg] / [lbs] [bar] / [psi] [mm] / [inch] [mm] / [inch] Thread size (female) ElLiptical Plugy G 50-80 C 542488 45 / 2 80 / 3 0.3 / 0.7 3 / 44 45 / 2 280 / R /4" / Elliptical Plugy G2 80-30 C 542489 75 / 3 30 / 5 0.4 / 0.9 2.5 / 36 76 / 3 360 / 4 R /4" / Elliptical Plugy G3 00-60 C 542490 00 / 4 60 / 6 0.6 /.3 2 / 29 98 / 4 420 / 7 R 3/8" / Pneumatic plug Z C 523289 20 / 30 / 0.0 / 0.02 2.5 / 36 9 / 65 / 3 R /8" / Pneumatic plug Z /2 C 523290 33 / 40 / 2 0. / 0.2 2.5 / 36 32 / 70 / 3 R /4" / Pneumatic plug Z2/3 C 523292 50 / 2 75 / 3 0. / 0.2 2.5 / 36 45 / 2 80 / 3 R /4" / Pneumatic plug Z3/4 C 523294 75 / 3 00 / 4 0.3 / 0.7 2.5 / 36 70 / 3 00 / 4 R /4" / Pneumatic plug Z4/6 C 523296 00 / 4 50 / 6 0.5 /. 2.5 / 36 85 / 4 65 / 7 R /4" / Pneumatic plug S2 C 523302 50 / 2 0.2 / 0.4 2.5 / 36 45 / 2 80 / 3 R /8" /8" Pneumatic plug S3/4 C 523304 75 / 3 00 / 4 0.4 / 0.9 2.5 / 36 70 / 3 00 / 4 R /8" /2" Pneumatic plug S4/6 C 523307 00 / 4 50 / 6 0.7 /.5 2.5 / 36 85 / 4 65 / 7 R /8" /2" number Foot-operated pump with safety valve.5 bar (22 psi) 528873 T 78082 T2 78096 T3 78099 Sealing surface Working dimensions pressure LengTH Width Height Length Width Fastening belts, 300 cm (0 ) long, yellow 6069 Fastening belts, 50 cm (5 ) long, yellow 6067 Sealing pressure Air requirement [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [cm] / [inch] [cm] / [inch] [bar] / [psi] [l] / [cu./ft.] T 78082 5 / 6 5 / 6.2 / 0.4 /.5 / 22 0 / 4 0 / 4.4 / 20.2 / 0.04 T2 78096 22.5 / 9 22.5 / 9.2 / 0.8 / 2.5 / 22 7.5 / 7 7.5 / 7.4 / 20 4.5 / 0.2 T3 78099 30 / 2 30 / 2.2 /.4 / 3.5 / 22 25 / 0 25 / 0.4 / 20 0.5 / 0.4 38 39

4. 6. LARGE LEAK SEALING BAGS M, M2 4 M-6, M-0 type 26 LARGE LEAK SEALING BAGS 4. 6. M2 SET -.5 BAR (22 psi) Large leak sealing bags are used for fast and temporary leak sealing. They are used on tanks, in large pipes and containers of all shapes and sizes. They are suitable for use with majority of hazardous liquids, fuels, water, oils, etc. Strap the bag and inflate it with air. Use sealing plates and acid bags for additional protection. Portable case 587296 Leak sealing bag, M2 with swivel eyes 60350 Sealing plate, 000 x 300 x 30 mm (40 x 2 x,2 ), CR 524552 Ratchet belt, 2 m (6.6 ), orange 60353 Flexible design Portable case 587296 Leak sealing bag, M with belt guiding slits 60043 Inflation hose 529094 Acid proof protection bag for M 528304 Foot-operatED pump 528873 Easy positioning M SET -.5 BAR (22 psi) Tensioning and extension belts, 0 m (33 ) long, orange, with ratchet 6065 Tensioning and extension belts, 0 m (33 ) long, yellow, with ratchet 6066 Sealing plates 52455 Sealing plate 524552 Used by first response unit The M type Set - with belt guiding slits consists of: 60043 528873 529094 6066 6065 52455 524552 Description Leak sealing bag, M with belt guiding slits Foot-operated pump with safety valve.5 bar (22 psi) Inflation hose, 0 m (33 ), blue with chain and deflation nipple Tensioning and extension belt, 0 m (33 ) long, yellow, with ratchet Tensioning and extension belt, 0 m (33 ) long, orange, with ratchet Sealing plate, 600 x 300 x 30mm, (24 x 2 x,2 ) CR Sealing plate, 000 x 300 x 30mm, (40 x 2 x,2 ) CR 528304 Acid proof protection bag for M 587296 Low air requirement Portable case 800 x 600 x 235mm (32 x 24 x 9 ) 2 2 2 Inflation hose, 0 m (33 ), blue with chain and deflation nipple 529094 Foot-operatED pump with safety valve.5 bar (22 psi) 528873 Acid proof protection bag for M2 525564 Fastening belt, 5 m (6 ), yellow 60365 Tensioning and extension belt, 0 m (33 ) long, yellow, with ratchet 6066 Ratchet belt, 2 m (6.6 ), yellow 60357 Sealing plates, 600 x 300 x 30 mm (24 x 2 x,2 ), CR 52455 Fastening belt, 5 m (6 ), orange 60354 Tensioning and extension belt, 0 m (33 ) long, orange, with ratchet 6065 The M2 type Set - with swivel eyes consists of: Description 60350 Leak sealing bag, type M2 with swivel eyes 528873 Foot-operated pump with safety valve.5 bar (22 psi) 529094 Inflation hose, 0 m (33 ), blue with chain and deflation nipple 60353 Ratchet belt, 2 m (6.6 ), orange 60357 Ratchet belt, 2 m (6.6 ), yellow 60354 Fastening belt, 5 m (6 ), orange 60365 Fastening belt, 5 m (6 ), yellow 6066 Tensioning and extension belt, 0 m (33 ) long, yellow, with ratchet The M/6 type Set - with belt guiding slits consists of: 29293 Description Leak sealing bag, type M/6 with belt guiding slits 53542 Single 6 bar (87 psi), fitting 57735 53465 + 576563 M/6 Set - 6 BAR (87 psi) Inflation hose, 0 m (33 ), blue with chain and deflation nipple Tensioning and extension belt (2x red+x blue), 0 m (33 ) long, with ratchet 528304 Acid proof protection bag for M 587296 Portable case 800 x 600 x 235mm (32 x 24 x 9 ) 2+ NEW DESIGN M/0 Set - 0 BAR (45 psi) The M/0 type Set - with belt guiding slits consists of: 282293 Description Leak sealing bag, type M/0 with belt guiding slits 53543 Single 0 bar (45 psi), fitting 57735 53465 + 576563 Inflation hose, 0 m (33 ), blue with chain and deflation nipple Tensioning and extension belt (2x red+x blue), 0 m (33 ) long, with ratchet 528304 Acid proof protection bag for M/0 587296 Portable case 800 x 600 x 235mm (32 x 24 x 9 ) 2+ 6065 Tensioning and extension belt, 0 m (33 ) long, orange, with ratchet 52455 Sealing plate, 600 x 300 x 30 mm (24 x 2 x,2 ), CR 2 524552 Sealing plate, 000 x 300 x 30 mm (40 x 2 x,2 ), CR 525564 Acid proof protection bag for M2 587296 Portable case 800 x 600 x 235mm (32 x 24 x 9 ) 40 4 Sealing surface Working dimensions pressure Length Width Height Length Width Sealing pressure Air requirement [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [cm] / [inch] [cm] / [inch] [bar] / [psi] [l] / [cu./ft.] M-.5 bar / 22 PSI 60043 62 / 24 30 / 2 2 / 0.8 4.5 / 0.5 / 22 50 / 20 30 / 2.4 / 20 20 / 0.7 M/6-6 bar / 87 PSI 29293 62 / 24 30 / 2 2 / 0.8 4.6 / 0 6 / 87 50 / 20 30 / 2 5 / 73 50 /.8 M/0-0 bar /45 psi 282293 62 / 24 30 / 2 2 / 0.8 4.6 / 0 0 / 45 50 / 20 30 / 2 9 / 3 70 / 2.5 M2-.5 bar / 22 PSI 60350 62 / 24 30 / 2 2 / 0.8 6.2 / 4.5 / 22 50 / 20 30 / 2.4 / 20 20 / 0.7

4. 7. SEALING TUBES SEALING BANDAGES 4. 8. StainlesS steel 25 4 Sealing tubes are used for a fast and temporary leak sealing of pipe bends and difficult-to-access pipe connections. Sealing bandages are used for sealing pipes from the outside. The bandages are made of highly chemical-resistant rubber compound, which retains a high level of flexibility in most demanding applications and situations. Easy positioning Used for pipe diameters up to 22 cm (9 ) Stainless steel parts Perfect for industrial usage Flexible design Easy positioning A wide usage range Chemical-resistant rubber compound sealing Tube 2.5 m (8 ), TYPE ST 250 5756 sealing Tube 3.5 m (.5 ), TYPE ST 350 57562 THE Large sealing tube set consists of: Description 57560 Sealing tube.5 m (5 ), type ST 50 5756 Sealing tube 2.5 m (8 ), type ST 250 sealing Tube.5 m, (5 ) TYPE ST 50 57560 57562 Sealing tube 3.5 m (.5 ), type ST 350 576506 Inflation control valve BRASS 576566 Inflation hose 0 m (33 ) EPDM MEDIUM sealing tube SET 57647 Sealing pad (FKM material) 577590 Sealing pad (NBR material) 57759 Sealing pad (EPDM material) Portable case 532632 57650 Deflation valve BRASS 523835 Pressure regulator 200/300 bar (2900/4350 psi) Sealing tube 2.5 m (8 ), type ST 250 5756 Sealing pad (FKM material) 57647 Inflation hose 0 m (33 ) EPDM 576566 Inflation control Valve BRASS 576506 Deflation valve BRASS 57650 52887 The Medium sealing tube set consists of: 5756 Description Sealing tube 2.5 m (8 ), type ST 250 576506 Inflation control valve BRASS 576566 Inflation hose 0 m (33 ), EPDM 57647 Sealing pad (FKM material) 57650 Deflation valve BRASS 532632 Portable case type 2 609 x 409 x 40 (24 x 6 x 5,5 ) Portable case type 470 x 360 x 20 mm (9 x 4 x 5 ) Inflation hose 0 m (33 ) with chain and deflation nipple 529094 Size usage range Single fitting.5 bar (22 PSI) 529663 Length Width Height FOOT PUMP WITH SAFETY VALVE.5 BAR (22 PSI) 528873 Working pressure Working Diameter Length pressure Air requirement [cm] / [inch] [cm] / [ft] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] ST 50 57560 2.5 / 50 / 5. / 2.4 0 / 45 8. / 0.3 ST 250 5756 2.5 / 250 / 8.5 / 3.3 0 / 45 3.5 / 0.5 ST 350 57562 2.5 / 350 /.5.8 / 4 0 / 45 8.8 / 0.7 [cm] / [inch] [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] SB 5573 5-8 / 2-3 25 / 0 2.5 / 5 / 0,4 2. / 5.5 / 22 SB2 52583 5-20 / 2-8 98 / 39 2.5 / 5 / 0,4 3.5 / 8.5 / 22 SB3 525065 5-20 / 2-8 98 / 39 2.0 / 8 / 0,4 3.9 / 9.5 / 22 SB4 525066 20-45 / 8-8 70 / 67 2.0 / 8 / 0,4 6.7 / 5.5 / 22 SB5 525277 5-8 / 2-7 80 / 32 25.0 / 0 / 0,4 4.3 / 0.5 / 22 SB6 54376 5-5 / 2-6 65 / 26 45.0 / 8 / 0,4 5.5 / 2.5 / 22 SB7 56042 0-35 / 4-4 30 / 5 45.0 / 8 / 0,4 9. / 20.5 / 22 SB8 52584 20-45 / 8-8 70 / 67 45.0 / 8 / 0,4. / 25.5 / 22 42 43

4. 9. VACUUM DRAINAGE BAG DRAINAGE SEALING BAG 4. 0. 26 4 The vacuum drainage bag seals leaks without using straps. Vacuum bags work well on large storage tanks and wide flat surfaces that can t be strapped. Vacuum sealing drainage bags seal and stick by creating a vacuum, which is why belts are not needed. A vacuum is created by using air-pressure from a high-pressure air source. Drainage sealing bags are fixed onto tanks with straps. Drainage sealing bags have an inflatable sealing perimeter which stops the leak but still allows venting and a controlled draining of liquid from the tank. Drainage sealing bags are suitable for use with fuels and many other toxic chemicals. Easy positioning No straps needed A controlled transfer of liquids Round shape Flexible design Easy positioning A controlled transfer of liquids Chemical-resistant rubber compound TB 50 set Description Description M- set 528345 Vacuum drainage bag TB 50 528344 Leak drainage bag M- VACUUM DRAINAGE BAG TB 50 528345 Ball valve, storz D, stainless 52903 Portable case 587296 Transparent venting and drainage hose, 5 m (6 ), storz D 52953 Inflation hose 0 m (33 ), yellow 76686 52903 52953 76686 587296 Ball valve, storz D, stainless Transparent venting and drainage hose, 5 m (6 ), storz D Inflation hose 0 m (33 ), yellow, system 2.5 bar (36 psi) Portable case 800 x 600 x 235 (32 x 24 x 9 ) 528873 529094 6066 6065 52903 52953 587296 Foot pump with safety valve.5 bar (22 psi) Inflation hose 0 m (33 ), blue with chain and deflation nipple Tensioning and extension belts 0 m (33 ) long, yellow, with ratchet Tensioning and extension belts 0 m (33 ) long, orange, with ratchet Ball valve, storz D, stainless Transparent venting and drainage hose 5 m (6 ), storz D Portable case 800 x 600 x 235 (32 x 24 x 9 ) 2 2 Portable case 587296 Leak drainage bag M- 528344 Ball valve, storz D, stainless 52903 Inflation hose 0 m (33 ), blue with chain and deflation nipple 529094 Transparent venting and drainage hose 5 m (6 ), storz D 52953 Tensioning and extension belts 0 m (33 ) long, orange, with ratchet 6065 Tensioning and extension belts 0 m (33 ) long, yellow, with ratchet 6066 Diameter Working DRAINAGE surface dimensions Pressure Vacuum Diameter Sealing pressure Air requirement [cm] / [inch] [kg] / [lbs] [bar] / [psi] [bar] / [psi] [cm] / [inch] [bar] / [psi] [l] / [cu./ft.] TB 50 528345 50 / 20 5.4 / 2 8 / 6 0.85 / 2 20 / 8.4 / 20.2 / 0.04 Working Sealing surface dimensions Sealing pressure pressure Length Width Height Length Width Height Air requirement [cm] / [inch] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [cm] / [inch] [cm] / [inch] [kg] / [lbs] [bar] / [psi] [l] / [cu./ft.] M- 528344 62 / 24 30 / 2 5.5 / 2 0.5 / 23.5 / 22 40 / 6 20 / 8 3.5 /.4 / 5 0 / 0.4 44 45

4.. DRAINAGE PIPE SEALING BAGS MEGA LEAK SEALING kit 4. 2. Drainage pipe sealing bags are perfect solution for leakages on pipe connections. Drainage pipe sealing bags have a built-in zipper that allows a simple positioning. The mega leak sealing kit is designed for leak containment in the petroleum, chemical and LNG (liquid natural gas) industries. Deploy the kit at chemical processing plants, oil refineries, LNG plant trains, regasification terminals, exploration and drilling platforms, ocean transport vessels, railways and pipeline transport facilities. Easy positioning Flexible sealing sleeves A controlled transfer of liquids Special zipping system Non-corrosive design Self-contained kit Sealed waterproof case All-in-one solution MEGA SEALING KIT MK MINI LEAK SEALING BAGS SET Zipper Straps Ball valve for a controlled transfer of liquids MK LEAK SEALING LANCE SET MK PIPE PLUG kit Transparent venting and drainage hose 5 m (6 ), storz D 52953 MK OIL-RESISTANT PLUGSY SET MK SEALING BANDAGES SET DIMENSIONS SUITABLE FOR PIPE DIAMETER DIAMETER LENGHT [cm] / [inch] [cm] / [inch] [cm] / [inch] FL 50 53572 5 / 2 26 / 0 95 / 37 FL 80 536352 8 / 3 26 / 0 95 / 37 FL 00 55237 0 / 4 26 / 0 95 / 37 MK M SET -.5 BAR (22 PSI) 46 47

4. 2. MEGA LEAK SEALING kit WATER TANKS 5. 0. THE MEGA SEALING KIT CONSISTS OF: This is our standard mega set. Custom-made mega kits are available on request. CASES: Description 577688 Mega black case 56260 Medium black case with foam 566529 Small black case with foam 2 MK SEALING BANDAGES SET Description 5573 SB 25 x 250 mm (5 x 0 ) 52583 SB 2 25 x 980 mm (5 x 39 ) 525277 SB 5 250 x 800 mm (0 x 32 ) MK M SET -.5 BAR Description 60043 529094 6066 Leak sealing bag, M with belt guiding slits Inflation hose, 0 m (33 ), blue with chain and deflation nipple Tensioning and extension belts, 0 m (33 ) long, yellow, with ratchet 56042 SB 7 450 x 300 mm (8 x 5 ) 52584 SB 8 450 x 700 mm (8 x 70 ) 576567 Inflation hose EPDM with chain and deflation nipple, 0 m (33 ) MK PIPE PLUG kit Description 542488 Elliptical Plugy G 50-80 C 6065 52455 524552 Tensioning and extension belts, 0 m (33 ) long, orange, with ratchet Sealing plate, 600 x 300 x 30 mm, (24 x 2 x,2 ) CR Sealing plate,000 x 300 x 30 mm (40 x 2 x,2 ), CR 528304 Acid proof protection bag for M 2 2 542489 Elliptical Plugy G2 80-30 C 542490 Elliptical Plugy G3 00-60 C 523289 Pneumatic plug type Z C 523290 Pneumatic plug type Z /2 C 523292 Pneumatic plug type Z2/3 C 523294 Pneumatic plug type Z3/4 C MK LEAK SEALING LANCE SET Description 523296 Pneumatic plug type Z4/6 C 523302 Pneumatic plug type S2 C 523304 Pneumatic plug type S3/4 C 528386 Wedge-shaped sealing bag type 523307 Pneumatic plug type S4/6 C 528387 Wedge-shaped sealing bag type 2 5495 Tyre valve extension hose m (3.3 ) 2 528388 Wedge-shaped sealing bag type 3 55285 Inflation hose 3 m (0 ), antistatic 528389 Cone-shaped sealing bag 54957 Static discharge kit 52868 Push and inflation rod, 35 cm (4 ), chain, deflation nipple 52869 Push and inflation rod, 35 cm (4 ) 3 52950 Shut-off unit 528873 Foot-operated pump with safety valve.5 bar (22 psi) 54960 Hand pump - mini 54952 Shut-off valve R /8 54953 Shut-off valve R /2 54958 Bag of corks 58008 Controlling pressure gauge - up to 3 bar (44 psi) 529087 Splash disc MK MINI LEAK SEALING BAGS SET Description 78082 T 78096 T2 78099 T3 528873 Foot-operated pump with safety valve.5 bar (22 psi) 6067 Fastening belts, 50 cm (5 ) long, yellow 2 6069 Fastening belts, 300 cm (0 ) long, yellow 3 MK OIL-RESISTANT PLUGSY SET Description 576566 Inflation hose 0 m (33 ), black 56765 CR inflation hose 3 m (0 ), black 2 56095 Pressure reducer 200/300 bar (2900/4350psi) 6030 Single fitting 2.5 bar (36 psi) 526635 Plugsy C 200-400 525324 Air cylinder 2L (22 cu.in.) 200 bar (2900 psi) Follow user manual Wear personal protective equipment 48 49

5.. SELF-SUPPORTING INTERCEPTIVE TANKS SELF-SUPPORTING INTERCEPTIVE TANKS 5.. storz They are used for emergency interception of hazardous liquids or for creating water supplies (fire extinguishing, snowmaking, etc.). As the self-supporting tank begins to fill with liquid, its unique design allows it to automatically become self-supporting. These tanks are strong, light in weight and fold up into a small space. A filled tank can be covered with a cover that prevents unwanted materials from entering the stored fluid. Optional equipment - PURCHASED SEPARATELY Repair kit Groundsheet Top cover Packing bag Self-supporting design Storage of various liquids Superb stability Easy to maintain STANDARD COLOuR Hand pump 6L (366 cu.in.)- 537734 4L (244 cu.in.)- 539072 GREEN RAL 6025 OPTIONAL COLOuRS on request note BeiGE RAL 00 The number and size of the filling/discharge ports can be adapted to customer requirements. BLACK (antistatic RUBBER) Coupling system Storz C system Material PES (polyester) fabric coated with NBR/PVC provides resistance to UV rays, ozone and other heavy weather conditions. Standard equipment supplied together WITH each tank Inflation hose for inflatable collar (with the connector to the compressor) Capacity Empty Full Diameter Diameter Height Bottom Height Bottom Top Rubber [m 3 ] / [m] / [m] / [m] / [m] / [inch] [US gallons] [inch or ft.] [inch or ft.] [inch or ft.] [m] / [inch] [kg] / [lbs] Thread size PS 500 58568 0.5 / 32.3 / 5 0.2 / 8.3 / 5 0.7 / 28 0.7 / 28 2 / 27 R 2" 4 PS 000 58567 / 264 2.2 / 87 0.2 / 8 2.2 / 87.4 / 55 0.8 / 39 8 / 40 R 2" 6 PS 500 530604.5 / 396 2.2 / 87 0.2 / 8 2.2 / 87.4 / 55 0.8 / 39 24 / 53 R 2" 6 PS 2000 56537 2 / 528 2.6 / 02 0.2 / 8 2.6 / 02.5 / 59 0.9 / 35 28 / 62 R 2" 6 PS 2500 530605 2.5 / 660 2.6 / 02 0.2 / 8 2.6 / 02.5 / 59 0.9 / 35 29 / 64 R 2" 6 PS 3000 76489 3 / 793 2.5 / 98 0.2 / 8 2.5 / 98.7 / 67 0.9 / 35 32 / 7 R 2" 6 PS 4000 530606 4 / 056 2.9 / 0 0.2 / 8 2.9 / 0 2 / 79. / 43 40 / 88 R 2" 6 PS 5000 77789 5 / 320 3. / 0 0.2 / 8 3. / 0 2.2 / 87.2 / 47 45 / 99 R 2" 6 PS 6000 50478 6 / 584 3.5 / 0.2 / 8 3.5 / 2.5 / 98.5 / 45 5 / 2 R 2" 6 PS 8000 52396 8 / 23 4 / 3 0.2 / 8 4 / 3 2.9 / 0.2 / 47 58 / 28 R 2" 6 PS 0000 59742 0 / 264 4.4 / 4 0.2 / 8 4.4 / 4 3.2 / 0.2 / 47 8 / 79 R 2" 8 PS 2000 50479 2 / 369 4.6 / 5 0.2 / 8 4.6 / 5 3.5 / / 39 95 / 209 R 2" 8 PS 5000 530607 5 / 3962 5 / 6 0.2 / 8 5 / 6 4 / 3.2 / 47 04 / 229 R 2" 8 PS 20000 530608 20 / 5283 5.7 / 9 0.2 / 8 5.7 / 9 4.4 / 4.2 / 47 22 / 269 R 2" 8 PS 25000 530609 25 / 6603 6 / 20 0.2 / 8 6 / 20 5 / 6.2 / 47 42/ 33 R 2" 0 PS 30000 53060 30 / 7924 6.5 / 2 0.2 / 8 6.5 / 2 5.5 / 8.2 / 47 59 / 35 2 R 2" 0 PS 40000 5306 40 / 0566 7.5 / 25 0.2 / 8 7.5 / 25 6.2 / 20.3 / 5 202 / 445 2 R 2" 0 PS 50000 53062 50 / 3207 8.3 / 27 0.2 / 8 8.3 / 27 7 / 23.3 / 5 235 / 58 2 R 2" 2 Valve No. of sides 50 5

5. 2. TRANSPORT TANKS TRANSPORT TANKS 5. 2. Ball valve Optional equipment - PURCHASED SEPARATELY Transport tanks are closed tanks suitable for transport and storage of various liquids, including water. They are pillow-shaped and highly resistant to chemicals, mineral oils, and industrial water; they can be used in temperatures ranging from -30 C to +90 C (-22 F to +94 F). Repair kit Groundsheet Top cover Packing bag Storage of various liquids Transport of various liquids A wide choice of different sizes Easy to maintain STANDARD COLOuR Note GREEN RAL 6025 The number and size of the filling/discharge ports can be adapted to customer requirements. OPTIONAL COLOURS on request BEiGE RAL 00 BLACK (antistatic RUBBER) Capacity Valve Empty Full Length Width Length Width Height Rubber Inflation Vent PVC Ball valve, sizes: R, R 2 or R 4 Material PES (polyester) fabric coated with NBR/PVC provides resistance to UV rays, ozone and other heavy weather conditions. Standard equipment supplied together with each tank vent R 2 with a PVC tube and an aluminum lid [m 3 ] / [US gallons] [m] / [inch or ft.] [m] / [inch] [m] / [inch or ft.] [m] / [inch] [m] / [inch] [kg] / [lbs] Thread size Thread size TRL 250 530685 0.25 / 66.3 / 5. / 43 / 39 0.9 / 35 0.4 / 6 6 / 3 R " R 2" TRL 500 530686 0.5 / 32.8 / 7. / 43.4 / 55 0.9 / 35 0.5 / 20 9 / 20 R " R 2" TRL 800 530687 0.8 / 2.9 / 75.5 / 59.5 / 59.2 / 47 0.6 / 24 3 / 29 R " R 2" TRL 000 530688 / 264 2.2 / 87.5 / 59.9 / 75.3 / 5 0.6 / 24 4 / 3 R 2" R 2" TRL 500 530689.5 / 396 2.4 / 94.9 / 75 2 / 79.5 / 59 0.7 / 28 9 / 42 R 2" R 2" TRL 2000 530690 2 / 528 2.5 / 98.9 / 75 2. / 83.5 / 59 0.7 / 28 22 / 49 R 2" R 2" TRL 2500 53069 2.5 / 660 3 / 0.9 / 75 2.5 / 98.4 / 75 0.9 / 35 25 / 55 R 2" R 2" TRL 3000 530692 3 / 793 3 /0 2.4 / 94 2.6 / 02 2 / 79 / 39 30 / 66 R 2" R 2" TRL 4000 530693 4 / 057 3.5 / 2.5 / 98 3. / 0 2.2 / 87 / 39 37 / 82 R 2" R 2" TRL 4500 560903 4.5 / 89 3.7 / 2 2.5 / 98 3. / 0 2.2 / 87 / 39 38 / 84 R 2" R 2" TRL 5000 530694 5 / 32 4.4 / 4 2.5 / 98 3.9 / 3 2.2 / 87 / 39 47 / 04 R 2" R 2" TRL 6000 530695 6 / 585 5 / 6 2.5 / 98 4.2 / 4 2.2 / 87 / 39 53 / 7 R 2" R 2" TRL 7000 530696 7 / 849 5.6 / 8 2.5 / 98 4.9 / 6 2.2 / 87. / 43 62 / 37 R 2" R 2" TRL 8000 530697 8 / 23 6.2 / 20 2.5 / 98 5.5 / 8 2.2 / 87. / 43 69 / 52 R 2" R 2" TRL 9000 530698 9 / 2377 6.9 / 23 2.5 / 98 6.2 / 20 2.2 / 87. / 43 76 / 68 R 2" R 2" TRL 0000 530699 0 / 2642 7.8 / 26 2.5 / 98 7. / 23 2.2 / 87. / 43 86 / 90 R 4" R 2" TRL 000 530700 / 2906 8.5 / 28 2.5 / 98 7.8 / 26 2.2 / 87. / 43 94 / 207 R 4" R 2" TRL 2000 53070 2 / 370 9.2 / 30 2.5 / 98 8.5 / 28 2.2 / 87. / 43 02 / 225 R 4" R 2" TRL 9000 502737 9 / 509 3 / 43 2.5 / 98 2.2 / 40 2.2 / 87. / 43 43 / 35 R 4" R 2" 52 53

5. 3. CLOSED RUBBER TANKS CLOSED RUBBER TANKS 5. 3. Ball valve Optional equipment - PURCHASED SEPARATELY Closed tanks are suitable for storage of various liquids, including water. They are pillow-shaped and equipped with two or more ports, depending on the size of the tank. The middle port on top is intended for venting air, whereas other ports allow filling and emptying of the tank. Repair kit Groundsheet Top cover Packing bag Storage of various liquids Extra durable material A wide choice of different sizes Easy to maintain STANDARD COLOUR NOTE The number and size of the filling/discharge ports can be adapted to customer requirements. GREEN RAL 6025 Material PES (polyester) fabric coated with NBR/PVC provides resistance to UV rays, ozone and other heavy weather conditions. PVC Ball valve, sizes: R, R 2 or R 4 Standard equipment supplied together with each tank Vent R (up to 0 m 3 ) (up to ZR 0000) Vent R 2 (from 0 50 m 3 ) (from ZR 0000 to ZR 50000) OPTIONAL COLOURS on request BEIGE RAL 00 BLACK (antistatic RUBBER) Vent R 2 (from 50 m 3 ) (from ZR 50000) 54 55 Capacity [m 3 ] / [US gallons] Empty Full Valve Length Width Length Width Height Rubber Inflation Vent [m] / [inch or ft.] [m] / [inch or ft.] [m] / [inch or ft.] [m] / [inch or ft.] [m] / [inch] [kg] / [lbs] Thread size Thread size ZR 250 530702 0.25 / 66.3 / 5. / 43. / 43 0.9 / 35 0.4 / 6 5 / R " R " ZR 500 59652 0.5 / 32.8 / 7. / 43.4 / 55 0.9 / 35 0.5 / 20 7 / 5 R " R " ZR 800 530703 0.8 / 2.9 / 75.5 / 59.5 / 59.2 / 47 0.6 / 24 0 / 22 R " R " ZR 000 59653 / 264 2.2 / 87.5 / 59.9 / 74.3 / 5 0.6 / 24 2 / 26 R 2" R " ZR 500 530704.5 / 396 2.4 / 94.9 / 75 2 / 79.5 / 59 0.7 / 28 7 /37 R 2" R " ZR 2000 63360 2 / 528 2.5 / 98.9 / 75 2. / 83.5 / 59 0.7 / 28 9 / 42 R 2" R " ZR 2500 530705 2.5 / 660 2.6 / 02 2.2 / 87 2. / 83.7 / 67 0.9 / 35 20 / 44 R 2" R " ZR 3000 5095 3 / 793 3 / 0 2.4 / 94 2.6 / 02 2 / 79 / 39 27 / 60 R 2" R " ZR 4000 530706 4 / 057 3.5 / 2.4 / 94 3. / 0 2 / 79 / 39 29 / 64 R 2" R " ZR 5000 74037 5 / 32 4.4 / 4 2.4 / 94 3.9 / 3 2 / 79 / 39 42 / 93 R 2" R " ZR 6000 530727 6 / 585 5 / 6 2.4 / 94 4.4 / 4 2 / 79. / 43 45 / 99 R 2" R " ZR 8000 530707 8 / 23 3.8 / 2 3.5 / 3. / 0 3 / 0. / 43 48 / 06 R 2" R " ZR 0000 60783 0 / 2642 4 / 3 3.8 / 2 3.5 / 3.3 /. / 43 5 / 2 2 R 2" R 2" ZR 2000 530708 2 / 370 4.3 / 4 3.8 / 2 3.8 / 2 3.3 /.2 / 47 6 / 34 2 R 2" R 2" ZR 5000 530709 5 / 3962 5 / 6 3.8 / 2 4.5 / 5 3.3 /.2 / 47 75 / 65 2 R 2" R 2" ZR 20000 53070 20 / 5283 5.5 / 8 4.9 / 6 5 / 6 4.4 / 4.3 / 5 92 / 203 2 R 2" R 2" ZR 25000 5307 25 / 6604 5.7 / 9 5.3 / 7 5. / 7 4.8 / 6.3 / 5 26 / 278 2 R 2" R 2" ZR 30000 53072 30 / 7925 6. / 20 5.7 / 9 5.3 / 7 4.9 / 6.3 / 5 54 / 340 R 4" R 2" ZR 35000 53073 35 / 9246 6.3 / 2 6. / 20 5.5 / 8 5.3 / 7.4 / 55 70 / 375 R 4" R 2" ZR 40000 53074 40 / 0567 6.7 / 22 6.3 / 2 5.9 / 9 5.5 / 8.4 / 55 87 / 42 R 4" R 2" ZR 45000 53075 45 / 888 2.8 / 42 4.3 / 4 2.3 /40 3.8 / 2.2 / 47 208 / 459 R 4" R 2" ZR 50000 53076 50 / 3209 7.4 / 24 6.7 / 22 6.5 / 2 5.8 / 9.5 / 59 220 / 485 R 4" R 2" ZR 60000 53077 60 / 5850 7.8 / 26 7.4 / 24 6.9 / 23 6.5 / 2.5 / 59 256 / 564 2 R 4" R 2" ZR 70000 53078 70 / 8492 8.8 / 29 7.4 / 24 7.9 / 26 6.5 / 2.5 / 59 288 / 635 2 R 4" R 2" ZR 80000 53079 80 / 234 8.8 / 29 8 / 26 7.8 / 26 7.2 / 24.6 / 63 32 / 688 2 R 4" R 2" ZR 00000 530720 00 / 2647 0 / 33 8.8 / 28 9. / 30 7.9 / 26.6 / 63 390 / 860 2 R 4" R 2" ZR 25000 53072 25 / 3302 / 36 0 / 33 0. / 33 9 / 30.6 / 63 487 / 074 2 R 4" R 2" ZR 50000 530722 50 / 39626 2 / 39 0 / 33 / 36 9 / 30.7 / 67 53 / 7 2 R 4" R 2" ZR 200000 530723 200 / 52834 6.5 / 54 0 / 33 5.5 / 5 9 / 30.7 / 67 73 / 62 2 R 4" R 2"

5. 4. DRINKING WATER TANKS DRINKING WATER TANKS 5. 4. Ball valve Optional equipment - PURCHASED SEPARATELY Drinking water tanks are ideal for emergency water storage, but can be used in many other applications as well. Repair kit 56536 Groundsheet Top cover Packing bag Certified material for drinking water storage A wide choice of different sizes Pillow-shaped design Easy to maintain STANDARD COLOURs BLUE NOTE The number and size of the filling/discharge ports can be adapted to customer requirements. Material PVC - drinking water certified PVC Capacity Valve Empty Full Length Width Length Width Height PVC Inflation Vent No. of handles [m 3 ] / [m] / [m] / [m] / [m] / [m] / [inch] [kg] / [lbs] Thread size Thread size [US Gallons] [inch or ft.] [inch or ft.] [inch or ft.] [inch or ft.] ZRD 250 534228 0.25 / 66.3 / 5. / 43. / 43 0.9 / 35 0.4 / 6 4 / 9 R " R " 4 ZRD 500 536569 0.5 / 32.8 / 7.3 / 5.4 / 55.0 / 39 0.5 / 20 7 / 5 R " R " 4 ZRD 800 536570 0.8 / 2.8 / 7.6 / 63.4 / 55.5 / 59 0.6 / 24 8 / 8 R " R " 4 ZRD 000 534226 / 264.8 / 7.8 / 7.4 / 55.5 / 59 0.6 / 24 0 / 22 R 2" R " 4 ZRD 500 536575.5 / 396 2.4 / 94.8 / 7 2.0 / 79.4 / 55 0.7 / 28 2 / 26 R 2" R " 4 ZRD 2000 536576 2 / 528 2.5 / 98 2.0 / 79 2. / 83.5 / 59 0.8 / 3 4 / 3 R 2" R " 4 ZRD 2500 536577 2.5 / 660 2.6 / 02 2.2 / 87 2.2 / 87.7 / 67 0.9 / 35 5 / 33 R 2" R " 4 ZRD 3000 536578 3 / 793 2.8 / 9 2.3 / 9 2.4 / 94.7 / 67.0 / 39 7 / 37 R 2" R " 4 ZRD 4000 536579 4 / 057 3.0 / 0 2.7 / 02 2.6 / 02 2.2 / 87.0 / 39 20 / 44 R 2" R " 4 ZRD 5000 533677 5 / 32 3.2 / 0 3.0 / 0 2.8 / 9 2.4 / 94. / 43 24 / 53 R 2" R " 4 ZRD 6000 536580 6 / 585 3.5 / 3.0 / 0 3. / 0 2.6 / 02. / 43 3 / 68 R 2" R " 4 ZRD 8000 53658 8 / 23 3.8 / 2 3.5 / 3.4 / 3. / 0. / 43 33 / 73 R 2" R " 4 ZRD 0000 536582 0 / 2642 4.0 / 3 3.8 / 2 3.6 / 2 3.4 /. / 47 48 / 06 R 2" R " 4 Special corner brackets ZRD 2000 536583 2 / 370 4.3 / 4 4.0 / 3 3.9 / 3 3.6 / 2.2 / 47 43 / 95 2 x R 2" R 2" 4 ZRD 5000 536584 5 / 3963 4.9 / 6 4.3 / 4 4.5 / 5 3.9 / 3.2 / 47 52 / 5 2 x R 2" R 2" 4 ZRD 20000 536585 20 / 5283 5.5 / 7 4.9 / 6 4.9 / 6 4.3 / 4.3 / 5 66 / 46 2 x R 2" R 2" 4 ZRD 25000 53660 25 / 6604 5.7 / 9 5.3 / 7 5. / 7 4.7 / 5.3 / 5 03 / 227 2 x R 2" R 2" 4 ZRD 30000 536602 30 / 7925 6. / 20 5.7 / 9 5.5 / 8 5. / 7.3 / 5 8 / 260 2 x R 2" R 2" 4 ZRD 35000 536603 35 / 9246 6.3 / 2 6. / 20 5.7 / 9 5.5 / 8.4 / 55 3 / 289 R 4" R 2" 4 Standard equipment supplied together with each tank ZRD 40000 536604 40 / 0567 6.7 / 22 6.3 / 2 6. / 20 5.7 / 9.4 / 55 43 / 35 R 4" R 2" 4 ZRD 45000 53660 45 / 888 7.0 / 23 6.7 / 22 6.4 / 2 6. / 20.4 / 55 59 / 35 R 4" R 2" 4 ZRD 50000 5366 50 / 3209 7.4 / 24 6.7 / 22 6.8 / 22 6. / 20.5 / 59 68 / 370 R 4" R 2" 4 ZRD 60000 53662 60 / 5850 7.8 / 26 7.4 / 24 7.2 / 24 6.8 / 22.5 / 59 97 / 434 2 x R 4" R 2" 4 PVC Ball valve, sizes: R, R 2 or R 4 Vent R (up to 0 m 3 ) (up to ZR 0000) Vent R 2 (from 0 50 m 3 ) (from ZR 0000 to ZR 50000) Vent R 2 (from 50 m 3 ) (from ZR 50000) ZRD 70000 53663 70 / 8492 8.8 / 29 7.4 / 24 8.2 / 27 6.8 / 22.5 / 59 220 / 485 2 x R 4" R 2" 4 ZRD 80000 53664 80 / 234 8.8 / 29 8.0 / 26 8.2 / 27 7.4 / 24.6 / 63 240 / 529 2 x R 4" R 2" 4 ZRD 00000 53665 00 / 2647 0.0 / 33 8.8 / 29 9.4 / 3 8.2 / 27.6 / 63 297 / 655 2 x R 4" R 2" 4 ZRD 25000 53666 25 / 3302.0 / 36 0.0 / 33 0.4 / 34 9.4 / 3.6 / 63 37 / 88 2 x R 4" R 2" 4 ZRD 50000 53667 50 / 39626 2.0 / 39 0.0 / 33.4 / 37 9.4 / 3.7 / 67 405 / 893 2 x R 4" R 2" 4 ZRD 200000 53668 200 / 52834 6.5 / 54 0.0 / 33 5.9 / 52 9.4 / 3.7 / 67 556 / 226 2 x R 4" R 2" 4 56 57

5. 5. MOBILE DECANTING UNITS BERMS 5. 6. Mobile decanting units are suitable as preventive protection from hazardous liquid spills. An empty mobile decanting unit is placed under the object, from which hazardous liquids will be pumped. The inflatable collar is inflated by compressed air or a hand pump. The berm unit is designed for catching spills of various fluids. It prevents spillages on the ground and in the environment. Berm units can also be used for decontamination. Their advantages are simplicity, versatile usability, low weight and imaginative ways of folding. A wide range of applications Simplicity Versatile usability Low weight A wide range of applications Simplicity Versatile usability Low weight Material STANDARD COLOUR STANDARD COLOUR PES (polyester) fabric coated with NBR/PVC provides resistance to UV rays, ozone and other heavy weather conditions. GREEN RAL 6025 OPTIONAL COLOURS on request BLACK RAL 9005 Material BEIGE RAL 00 PVC BLACK (antistatic RUBBER) Standard equipment supplied together with each tank Inflation hose for inflatable COLLAR (with the connector to the compressor) Capacity INFALTION VALVE C7 NOTE The number and size of the filling/discharge ports can be adapted to customer requirements. (inner side) Full Length Width Height Rubber Optional equipment PURCHASED SEPARATELY WORKING PRESSURE Hand pump 6L (366 cu.in.)- 537734 4L (244 cu.in.)- 539072 NO. of handles : BERM Mini sizes number Capacity Length Width Height [l] / [US Gallons] [cm] / [cm] / [cm] / [inch] [inch] [inch] BERMini 45 565865 45 / 2 60 / 24 60 / 24 2.5 / 5 BERMini 00 54990 00 / 26 00 / 39 00 / 39 0 / 4 BERMini 200 553288 200 / 53 00 / 39 00 / 39 20 / 8 Folded berm : BERM Small sizes number Capacity Length Width Height [l] / [US Gallons] [cm] / [cm] / [cm] / [inch or ft.] [inch or ft.] [inch] BERM BS 5 55373 225 / 59 50 / 59 50 / 59 0 / 4 BERM BS 52 55375 450 / 9 50 / 59 50 / 59 20 / 8 BERM BS 20 579648 400 / 06 200 / 79 200 / 79 0 / 4 BERM BS 202 579650 800 / 2 200 / 79 200 / 79 20 / 8 BERM BS 30 55376 900 / 238 300 / 0 300 / 0 0 / 4 BERM BS 302 55378 800 / 476 300 / 0 300 / 0 20 / 8 [m 3 ] / [US Gallons] [cm] / [inch or ft.] [cm] / [inch or ft.] [cm] / [inch] [kg] / [lbs] [bar] / [psi] MP 800 7603 0.8 / 2 2.5 / 98 2 / 79 0.2 / 8 20 / 44 0.3 / 4.35 4 MP 000 53063 / 264 3 / 0 2 / 79 0.2 / 8 23 / 5 0.3 / 4.35 4 MP 500 7602.5 / 396 3.5 / 2.5 / 98 0.2 / 8 30 / 66 0.3 / 4.35 4 MP 2000 53064 2 / 528 4 / 3 3 / 0 0.2 / 8 39 / 86 0.3 / 4.35 4 MP 3000 53065 3 / 793 5 / 6 3.5 / 0.2 / 8 52 / 5 0.3 / 4.35 4 MP 4000 7357 4 / 057 7 / 23 3.5 / 0.2 / 8 69 / 52 0.3 / 4.35 4 MP 5000 79358 5 / 32 8.5 / 28 3.5 / 0.2 / 8 82 / 8 0.3 / 4.35 4 MP 6000 60773 6 / 585 0 / 33 3.5 / 0.2 / 8 95 / 209 0.3 / 4.35 4 MP 7000 70053 7 / 849 2 / 39 3.5 / 0.2 / 8 3 / 49 0.3 / 4.35 4 MP 0000 53066 0 / 2642 7 / 56 3.5 / 0.2 / 8 56 / 344 0.3 / 4.35 4 MP 2000 53067 2 / 370 20 / 66 3.5 / 0.2 / 8 82 /40 0.3 / 4.35 4 : BERM Medium sizes NO. of supporting Capacity number Length Width Height angles [l] / [US Gallons] [cm] / [ft.] [cm] / [ft.] [cm] / [inch] BERM BM 5 55284 6000 / 585 500 / 6 400 / 3 30 / 2 22 BERM BM 8 552842 9000 / 2378 800 / 26 400 / 3 30 / 2 30 BERM BM 2 552843 4000 / 3698 200 / 39 400 / 3 30 / 2 40 BERM BM 20 552846 24000 / 6340 2000/ 66 400 / 3 30 / 2 58 58 59

5. 7. HELICOPTER ONION TANK ABOUT US 6. 0. Helicopter onion tanks (HOT) are designed for intercepting, decanting and storing of liquids (water, process water) in the event of accidents, interventions by fire-fighting teams and in other situations. The helicopter onion tank is adapted to capture the water by means of special fire-fighting bag. Self-supporting design Storage of various liquids Superb stability Easy to maintain STANDARD COLOUR ORANGE Material TPU Optional equipment PURCHASED SEPARATELY PVC Ball valve, sizes: R 2 or R 4 NOTE The number and size of the filling/discharge ports can be adapted to customer requirements. Capacity Full Bottom Top Height PVC [m 3 ] / [US Gallons] [m] /[ft.] [m] / [ft.] [m] / [inch] [kg] / [lbs] HOT 2 282033 2 / 370 3.6 / 2 2.3 / 7.5.7 / 70 43 / 95 HOT 24 579468 24 / 6340 5 / 6 3.3 /.7 / 70 67 / 48 60 6

6.. WARRANTY ABOUT us 6. 2.. GENERAL CONDITIONS 5. MAKING A WARRANTY CLAIM.. These warranty conditions apply as of 30 June 204 for Environmental Protection and Rescue Programme products, manufactured by Savatech (Products). If any provision of this warranty conditions would be contrary to any mandatory legal provisions in any particular jurisdiction, such provision shall apply to a maximum extent as provided for by such mandatory legal provisions..2. products which may be sold by Savatech Environmental Protection and Res- 5.. The Purchaser is obliged to take delivery of the Products and perform an ordinary inspection of the Product upon delivery. 5.2. Any claim by the purchaser with reference to the Products shall be deemed waived unless submitted in writing to Savatech within the earlier of (I) eight days as of the discovery of the defect, or (II) twelve months as of the date of delivery of the Products or thirty-six (36) months as of delivery of high pressure lifting bags. Discovery of the defect is deemed to have occurred when a We are a division of Savatech d.o.o. within the Trelleborg Group. We manufacture and sell rubber products for environmental protection and rescue operations and industrial use. Our growing division was established more than thirty years ago and is constantly striving to meet our customer s current and future needs and expectations. cue Programme but are not manufactured by it are not covered by this war- defect could have reasonably been detected by the purchaser. ranty and are sold exclusively with warranties, if any, by their original manufacturer. 5.3. claim must at least contain the following data: part number, 2. MANAGEMENT OF THE PRODUCTS 2.. in order to claim a remedy pursuant to this warranty, purchaser must conform to instructions for management of the Products which are available on: serial number, description of defect, and must be substantiated by adequate evidence, such as pictures, etc. Upon request, Savatech must be allowed to inspect the Product. Knowledge and experience Professional service Quality products A partner to rely on http://www.savatech.com/manuals/index.htm www.savatech.eu/environmental-protection-and-rescue/manuals 3. WARRANTY 5.4 To obtain performance under this warranty, any products suspected of having a manufacturing defect in materials or workmanship shall be returned freight prepaid for inspection to SAVATECH d.o.o., Environmental Protection KNOWLEDGE AND EXPERIENCE QUALITY PRODUCTS 3.. Savatech warrants to the purchaser that for the period of twelve (2) months and Rescue Programme, Škofjeloška c. 6, 4000 Kranj, Slovenia. as of delivery of the Products, such Products shall be free from defects in material and workmanship, subject to normal and management of the Products, including, among others, proper storage. For high pressure lifting bags, the warranty period amounts to thirty-six (36) months. 3.2. This warranty shall be in lieu of any other warranties, express or implied, including, but not limited to, any warranty of merchantability or fitness for a particular purpose. 6. REMEDIES 6.. Savatech shall decide on a claim within forty -five days after receiving a complete documentation and Product pursuant to art 5. 6.2. providing Savatech acknowledges the claim as justified, it shall, at its discretion, either: repair the Product, replace those components of the Product which are defective, Thirty years of experience and knowledge, investment in new technology, team-work and working closely with our business partners, have enabled us to develop new and exciting products and to continuously improve our existing product range. When assessing quality of our products we carefully consider a number of criteria including environmental suitability, ease of use, design, safety, reliability, and packaging. Our production facilities are certified to the ISO 900 and ISO 400 standards. 4. EXCLUSION OF WARRANTY 4.. Warranty shall be excluded in cases where the Products have not been used for the ordinary purpose or have been subject to abnormal conditions such as, but not limited to misuse, mishandling (such as, but not limited to, cuts, tears, vandalism, fire, wilful destruction, improper installation and/or improper maintenance, misapplication), use of unauthorized components or replace the Product, if repair is not possible or reasonable, reimburse the consideration for the Product or its components which are defective. 6.3. Whenever Savatech repairs or replaces the Product at its expense or reimburses the purchase price, it shall reimburse the distributor or the purchaser (depending on each case), with a credit note, the same surface freight amount PROFESSIONAL SERVICE A professional but caring approach, flexibility and quick delivery times combined to provide the ideal service in support of our quality product range. A PARTNER TO RELY ON We understand the value of long-term partnership. Our aim is to develop trusting relationships, which foster success and bring benefits to both our partners and ourselves. attachments or if adjustments or repairs have been performed by anyone the distributor or the purchaser had when returning the Product to the Man- other than Savatech or its authorized agents. ufacturer. 4.2. Warranty shall also be excluded and Savatech shall not be held liable in case of force majeure circumstances, such as, but not limited to: war or threat of war, sabotage, insurrection, riots or requisition; all laws, restrictions, regulations, by-laws, prohibitions or any other measures by the governmental, parliamentary or local bodies; import and export regulations or embargo; strikes, lock-outs or other industrial measures or trade disputes (if including Manufacturer s employees or third party); difficulties with supply of raw materials, work force, fuel, parts or machinery; power blackout, break of machinery. 4.3. Savatech shall not be held liable for any deficiencies in Products manufactured according to drawings, designs, project drafts and/or specifications provided by the purchaser. 4.4. ordinary wear and tear is not covered by this warranty. 6.4. Remedies pursuant to this article 6 shall constitute the sole and exclusive remedy in the event of a breach of warranty. For the avoidance of doubt, Savatech shall not be liable for any incidental, consequential and/or non-pecuniary damages or damages having a comparable effect. Savatech s aggregate liability in respect of any and all losses arising under or in connection to the contract/ purchase order/any similar document that is the basis for sale of Products, shall be limited to an amount equal to the invoiced price for the Products supplied. Any exclusions or limitations of liability are agreed to be extended for the benefit of all entities within Savatech s group. 7. CLOSING PROVISIONS 7.. no statement or action by Savatech, whether express or implied, other than set forth herein, shall constitute a warranty. QUALITY CERTIFICATES ISO 900 ISO7TS 6949 ISO 400 OHSAS 800 EN 373 GOST R 50982-2009 CNBOP 62 63

Savatech d. o. o. Škofjeloška cesta 6 phone: +386 (0)4 206 6388 www.savatech.eu Professional environmental 4000 Kranj e-mail: info.eko@savatech.si www.savatech.com protection products Slovenija fax: +386 (0)4 206 6390 Version 05 - April 208 of Trelleborg Group