Small Form-factor Pluggable Connector OUTLINE SPT series is a connector and cage which is compatible to Small Form-factor Pluggable(SFP/ SFP+) specification of Multi-Source greement(ms) for optical transceivers. FETURES 0.8mm pitch pins SMT connector Excellent EMI shield Single port (Separate or one piece), 1by2 and 1by4 ganged cage styles are available. SMT, DIP or press-fit mounting styles are available. Cage serves as a guide rail for transceivers. RoHS compliant PPLICTIONS Fiber Channel, Gigabit Ethernet, High-end Server SPECIFICTION Rated Voltage Rated Current Dielectric Withstanding voltage Insulation Resistance Contact Resistance MTERIL/FINISH 1V C(r.m.s.) 0.5 / Contact 350V C(r.m.s.) for 1 Minute 0M Ω Min. at 250V DC 30m Ω Max. Item Material / Finish Contact Copper lloy / Contact area:u over Ni Plating Tail area:sn-g over Ni Plating Housing High Temperature Plastic /(UL-94V-0) Cage Copper lloy / Sn-Reflow Plating 130513
Max. 0.8mm Pitch Connector SPT-RS-12-F (.0 0.40 3.80. 0.40 3.80.. 8. 4. 0.06 PLC (5. Stand off Surface (.00 (9.40 1.30 Max. Min. (1.0 (.40 5.40 Max. 0.50 0.03 0.05 0. 2 PLC SPT-R0-C2 and SPT-R0-CCS PLC 0.06-1 SPT-RS2 Single Port Cage (One-piece Type) SPT-R0-C2 SPT-R0-C2 DIP Type -1 Max. SPT-R0-C2 and SPT-R0-CCS -1 SPT-R0-CS Max. -1 Max. Your catalogue SPT-R0-CCS checking the latest speifications with our drawings would be highly appreciated. Recommended PC Layout Detail 2
-1-1 SPT-R0-CS Single Port Cage (One-piece Type) SMT Type Max. Max. SPT-R0-CS and SPT-R0-CCS rn prohibition -1-1 Thru hole 34.50 SPT-HN-CGE-1P-FS Press Fit type SFP+ Cage 8.95 14.00 4 48.92 15.25±0. 34.50 Recommended eel Design 3-0.95±0.05 0.85±0.05 34.50. 0. 3-0.95±0.05 0.85±0.05. Recommended PC Layout Pattern prohibition -1.05±0.05 area -1.05±0.05 26.80±0. 41.30±0. 26.80±0. 41.30±0. Pattern prohibition area. 9.0 3 0.85±0.05-1.05±0.05 26.80±0. 41.30±0. Recommended PC Layout 2-2-3.00. Pattern prohibition area -1.05±0.05 Thru hole 0.85±0.05 3. 2-±0.05 3. 2-±0.05 Detail.40±0. 3-0.95±0.05 0.50±0.03 0.50±0.03 0.06 0.06 ±0.05 0.06 ±0.05 0.06 1.0±0. 34.50 26.80±0. 41.30±0..40±0. 0.40±0. 3.50±0.30 Detail eel 1.0±0. 3.50±0.30 Detail - REF 0.50±0.03 0.06 2-±0.05 ±0.05 15.25±0.0.06 Recommended eel Design 1.0±0. 3.50±0.30 3.68±0. 1.0±0.. 3. 8.48±0. 1.0±0. REF Host oard 3.68±0. 1.0±0. 8.48±0. 1.0±0. 3-0.95±0.05 3.68±0. 1.0±0. 8.48±0. 1.0±0..40±0. 0.40±0. eel 0.50±0.03 0.06 2-±0 0. Thru hol ±0 0.06 1.0±0. 3.50±0 Detail - 15.25±0. 0±0. 0.40±0. eel Host oard REF
1 by 2 Ganged Cage SPT-HN-CGE-2P-FS Press Fit type SFP+ Cage 16.30 8.0 50.00 48.3 9.0 32.0 40.30 2-14.00 REF 2-8.95 9.0 2- REF 38.35 3 4.50. 21.30.00 38.35 3. PC Surface Thru Recommended hole PC Layout 28.50 1.05±0.05(Except rea 12-1.05±0.05. PC Surface 1.05±0.05(Except rea 12-1.05±0.05 4.50 21.30.00. 6-0.95±0.05 28.50 2 3 Recommended PC Layout 1 rea 0.95±0.05(6 plc. 1 rea 0.95±0.05(6 plc. 6-0.95±0.05 2 3 -±0.05 0.06 9. -0.50±0.05 0.06 9. 1.40 4-±0.050 4. 4. 4
1 by 4 Ganged Cage SPT-HN-CGE-4P-FS Press Fit type SFP+ Cage 4-14.00 42.5 REF 50.00 48.3 4-8.95 REF 38.35 3 21.30 9.0 16.30 8.0 40.30 32.0 rea 0.95±0.05(12 plc...00.. 24.85 1 2 3 -±0.05 8-±0.05 9. 9. -0.50±0.03 1.40 0.06-0.50±0.03 0.06 -±0.05 4. 8-±0.05 1.40 4.50 3.55 4. 4.. PC Surface 28.50 1.05±0.05(Except rea 42.5-1.05±0.05 Recommended PC Layout PC Thickness:1.60±0.19 Specifications and/or dimenssions in this catalogue are subject 1.60 to ±0.19 change without notice. 5 9. Detail : 4. 9. :
Separate Type(Lower Cage) SPT-R0-CL-FS DIP Type 48.60 Max. 13.90 Min. SPT-R0-CL-FS 1.25 Max. 1 PLC Max. 0.0 Max. 8 PLC 6 PLC Max. 3 PLC SPT-R0-CL-FS SMT Type 48.60 Max. 1 SPT-R0-CT-FS 13.90 Min. 14.60 16. (.50 1 2 3 0.0 ±0. SPT-R0-CT-FS (.50 Separate Type(Top Cage) 1 Max. 48.80 Max. 1.80 Min. SPT-R0-CT-FS DIP Type ( ( 0.55 Max. 3 PLC 1 Max. 48.80 Max. SPT-R0-CT-FS 1.80 Min. ( ( 0.55 Max. 3 PLC SPT-R0-CT-FS SMT Type SPT-R0-CT-FS 1 Max. 48.80 Max. 9.0 0.50 Max. ( ( 0.55 max. 1 Max. 48.80 Max. 9.0 0.50 Max. ( ( 6 0.55 max.
±0.05 0.95 ±0.05 -- -- PC Mounting Dimensions Type Type PC Mounting Type. Top Cage Cage Combination Lower Cage SPT-R0-CT-FS SPT-R0-CL-FS SPT-R0-CL-FS and SPT-R0-CT-FS. SPT-R0-CT-FS SPT-R0-CL-FS C SPT-R0-CT-FS SPT-R0-CL-FS 0.. 1 1.05±0. 3. ±0.05 14.1.08.08 SPT-R0-CL-FS and SPT-R0-CT-FS -- ±0.05. 3 3.00. 1 14.0 1.0. SPT-R0-CL-FS and SPT-R0-CT-FS 1... 1 1.05±0. 3. ±0.05 14.1 0...08 ±0.05 1.00 SPT-R0-CL-FS and SPT-R0-CT-FS.08 14.1..08 :1.15 ±0.05 TH 3 :0.85 0.05 TH. 12. 1 1.05 ±0. 8. 4.00.00 ±0.05 0.06 :0.95 0.05 TH Detail Detail. 1 14.0 ±0.05 1.0 14.30. 1.0 0.06 1. Type C 14.1..08 1.05 ±0.. 1 14.30 4.00 ±0.05 0.95 ±0.05. 8. 12...00 1.0 0.06 ±0.05 Detail 0.06 12. 8. 4.00 7