INTERNATIONAL Malleable Pipe s & Unions Schedule #514 Effective: MAy 5, 2014
90 ELBOWS 45 ELBOWS 1/8 50 600 7 9.29 12.12 1/4 35 420 11 8.85 12.12 3/8 90 360 16 8.85 12.12 1/2 50 200 26 6.63 8.01 3/4 35 105 41 8.01 9.63 1 20 60 64 14.07 18.07 1-1/4 20 40 99 22.82 27.84 1-1/2 15 30 127 30.06 36.69 2 8 16 197 51.56 61.13 2-1/2 12 12 327 111.90 152.39 3 8 8 497 166.90 256.15 4 1 2 930 354.93 443.36 5 2 2 1499 786.82 1041.60 6 1 1 1963 1327.63 1878.93 1/4 x 1/8 40 480 9 17.29 20.44 3/8 x 1/8 105 420 13 20.03 25.80 3/8 x 1/4 90 360 14 12.75 18.24 1/2 x 1/8 60 240 15 12.40 14.99 1/2 x 3/8 60 240 21 12.11 14.04 1/2 x 1/4 60 240 18 12.40 14.99 3/4 x 1/8 40 160 23 16.59 21.61 3/4 x 1/4 40 160 25 16.59 21.61 3/4 x 1/2 40 160 33 12.56 16.33 3/4 x 3/8 40 160 30 16.59 21.61 1 x 3/4 50 54 16.06 20.84 1 x 1/2 25 44 17.05 22.09 1 x 3/8 25 39 26.19 33.88 1-1/4 x 1 10 40 82 26.14 34.94 1-1/4 x 3/4 15 60 69 29.66 41.96 1-1/4 x 1/2 20 80 62 34.66 42.81 1-1/2 x 1-1/4 15 30 121 42.85 53.73 1-1/2 x 1 10 40 92 42.85 53.73 1-1/2 x 3/4 10 40 88 42.85 53.73 1-1/2 x 1/2 15 60 76 43.80 54.86 2 x 1-1/2 10 20 163 54.31 65.20 2 x 1-1/4 10 20 152 61.80 74.64 2 x 1 14 28 143 61.80 74.64 2 x 3/4 9 36 125 63.02 76.14 2 x 1/2 10 40 63.02 76.14 2-1/2 x 2 6 12 270 148.93 212.53 2-1/2 x 1-1/2 6 12 221 151.54 238.69 2-1/2 x 1-1/4 8 16 225 151.54 238.69 3 x 2 4 8 358 240.64 335.62 3 x 2-1/2 4 8 435 240.64 335.62 1/8 50 600 5 13.43 18.28 1/4 30 360 10 13.71 16.27 3/8 75 300 15 12.47 16.22 1/2 50 200 23 10.83 12.47 3/4 40 120 36 13.21 17.45 1 20 60 55 16.84 20.01 1-1/4 20 40 76 29.46 36.53 1-1/2 10 30 115 36.34 43.55 2 12 24 177 54.73 64.98 2-1/2 12 12 284 154.46 220.11 3 10 10 429 200.52 319.99 4 4 4 756 389.58 536.31 6 1 1 1512 1327.63 1878.93 90 STREET ELLS 1/8 60 720 6 13.41 17.22 1/4 35 420 10 13.41 16.66 3/8 60 240 16 13.41 16.66 1/2 60 180 24 13.74 17.19 3/4 35 105 38 13.41 16.66 1 45 90 59 19.27 22.69 1-1/4 25 50 93 29.46 38.14 1-1/2 9 27 126 39.27 46.97 2 8 16 223 63.69 81.44 2-1/2 5 10 362 157.25 220.86 3 8 8 533 239.96 333.39 4 4 4 935 390.81 550.32 45 STREET ELLS 1/8 70 840 5 20.83 23.82 1/4 40 480 9 15.48 20.44 3/8 400 13 17.60 23.33 1/2 75 225 22 14.13 18.01 3/4 40 120 32 21.73 29.15 1 25 75 56 25.21 36.04 1-1/4 10 40 78 43.64 54.00 1-1/2 10 30 113 54.18 65.40 2 12 24 178 91.36 112.38 2-1/2 6 12 298 194.37 264.20 3 3 6 469 297.85 395.27 4 4 4 745 557.77 642.72 www.wardmfg.com 2 Sheet #514, Effective: May 5, 2014
TEES 1/8 120 480 10 14.16 18.24 1/4 75 300 16 13.40 15.81 1/4 x 1/8 25 300 13 17.78 23.33 3/8 45 180 24 13.40 15.81 3/8 x 3/8 x 1/8 90 360 16 17.78 23.33 3/8 x 3/8 x 1/4 60 240 22 17.78 23.33 1/2 40 120 37 8.65 9.73 3/4 35 70 56 12.25 16.34 3/4 x 3/4 x 1-1/4 20 60 77 50.81 65.17 1 20 40 88 21.60 26.75 1-1/4 14 28 133 35.09 42.26 1-1/2 12 24 160 43.64 52.76 2 8 16 267 74.19 88.04 2-1/2 4 8 489 152.58 236.46 3 6 6 650 229.05 277.25 4 1 2 1167 537.78 655.56 1/2 x 1/2 x 1/8 40 160 24 18.41 26.70 1/2 x 1/2 x 3/8 40 160 30 18.41 23.88 1/2 x 1/2 x 1/4 40 160 28 14.63 18.79 1/2 x 1/4 x 1/2 30 120 32 21.42 21.42 3/4 x 3/4 x 1/2 20 80 49 18.91 22.57 3/4 x 3/4 x 3/8 25 40 22.04 23.45 3/4 x 3/4 x 1/4 25 39 20.75 23.45 3/4 x 1/2 x 3/4 20 80 49 21.60 25.80 3/4 x 1/2 x 1/2 25 40 19.59 25.80 3/4 x 1/2 x 1 18 72 64 27.40 38.14 3/4 x 3/4 x 1 40 80 65 27.40 38.14 3/4 x 3/4 x 1-1/2 12 36 89 94.65 108.35 1/2 x 1/2 x 3/4 30 120 44 21.60 25.80 1/2 x 1/2 x 1 25 53 31.30 38.56 1 x 1 x 3/4 12 48 77 24.05 31.68 1 x 1 x 1/2 15 60 69 24.05 31.68 1 x 1 x 3/8 15 60 60 30.08 38.93 1 x 1 x 1/4 20 80 53 27.12 38.14 1 x 1 x 1-1/4 11 44 92 50.83 60.67 1 x 1 x 1-1/2 9 36 116 75.96 103.20 1 x 3/4 x 1 30 60 83 27.40 38.14 1 x 3/4 x 3/4 15 60 61 25.35 38.14 1 x 3/4 x 1/2 20 80 64 27.12 38.54 1 x 1/2 x 1 15 60 74 27.40 38.14 1 x 1/2 x 3/4 20 80 66 31.94 38.93 1 x 1/2 x 1/2 20 80 50 27.40 38.14 1 x 1 x 2 12 24 142 93.08 105.94 1-1/4 x 3/4 x 1-1/4 20 40 110 45.34 56.35 1-1/4 x 3/4 x 1 10 40 97 46.53 62.51 1-1/4 x 3/4 x 3/4 10 40 90 49.91 65.25 1-1/4 x 3/4 x 1/2 10 40 75 49.91 59.58 1-1/4 x 1/2 x 1/2 25 50 67 48.65 59.58 1-1/4 x 1/2 x 3/4 25 50 79 48.65 59.58 1-1/4 x 1/2 x 1 20 40 88 48.65 59.58 1-1/4 x 1/2 x 1-1/4 20 40 110 49.91 59.58 1-1/4 x 1-1/4 x 1 20 40 118 38.26 48.99 1-1/4 x 1-1/4 x 3/4 20 40 106 38.26 48.99 1-1/4 x 1-1/4 x 1/2 20 40 93 43.64 51.81 1-1/4 x 1 x 1-1/2 18 36 114 59.58 74.85 1-1/4 x 1 x 1-1/4 15 30 120 50.83 60.67 1-1/4 x 1 x 1 20 40 104 43.84 59.58 1-1/4 x 1 x 3/4 20 40 86 43.84 59.58 1-1/4 x 1 x 1/2 20 40 80 46.43 59.43 1-1/4 x 1-1/4 x 1-1/2 12 24 138 59.58 74.85 1-1/4 x 2 12 24 174 93.08 105.94 1-1/2 x 3/4 x 1-1/2 12 24 129 59.58 75.06 1-1/2 x 3/4 x 1-1/4 12 24 142 95.01 108.75 TEES 1-1/2 x 3/4 x 3/4 15 30 83 95.01 108.75 1-1/2 x 3/4 x 1/2 15 30 91 95.01 108.75 1-1/2 x 1/2 x 3/4 12 48 72 75.71 88.45 1-1/2 x 1/2 x 1 18 36 119 75.71 88.45 1-1/2 x 1/2 x 1-1/4 15 30 144 59.58 82.36 1-1/2 x 1/2 x 1-1/2 12 24 137 59.58 82.36 1-1/2 x 1 x 1-1/4 12 24 124 59.58 75.06 1-1/2 x 1-1/2 x 1-1/4 12 24 152 59.58 75.06 1-1/2 x 1-1/2 x 1 10 30 137 48.37 60.64 1-1/2 x 1-1/2 x 3/4 15 30 117 48.37 60.64 1-1/2 x 1-1/2 x 1/2 18 36 107 51.11 64.09 1-1/2 x 1-1/4 x 2 8 16 187 93.08 106.13 1-1/2 x 1-1/4 x 1-1/2 12 24 155 80.55 104.89 1-1/2 x 1-1/4 x 1-1/4 12 24 161 80.55 104.89 1-1/2 x 1-1/4 x 1 12 24 129 51.10 73.62 1-1/2 x 1-1/4 x 3/4 12 24 112 59.58 75.06 1-1/2 x 1-1/4 x 1/2 12 24 101 59.58 75.06 1-1/2 x 1 x 1-1/2 12 24 140 59.58 75.06 1-1/2 x 1 x 1 15 30 111 59.58 75.06 1-1/2 x 1 x 3/4 15 30 113 59.58 75.06 1-1/2 x 1 x 1/2 15 30 88 59.58 75.06 1-1/2 x 1-1/2 x 2 8 16 194 93.08 106.13 2 x 2 x 1-1/2 8 16 235 80.05 102.89 2 x 2 x 1-1/4 8 16 203 80.05 102.89 2 x 2 x 1 10 20 179 75.73 88.45 2 x 2 x 3/4 10 20 176 75.73 88.45 2 x 2 x 1/2 10 20 149 75.71 98.10 2 x 1-1/2 x 2 8 16 227 93.08 106.13 2 x 1-1/2 x 1-1/2 8 16 182 91.24 102.89 2 x 1-1/2 x 1-1/4 8 16 170 93.08 106.13 2 x 1-1/2 x 1 10 20 177 91.24 104.42 2 x 1-1/2 x 3/4 10 20 161 98.99 114.46 2 x 1-1/2 x 1/2 10 20 162 114.04 114.04 2 x 1-1/4 x 2 8 16 221 96.77 123.52 2 x 1-1/4 x 1 8 16 165 134.46 155.68 2 x 1-1/4 x 1-1/4 8 16 197 93.08 106.12 2 x 1-1/4 x 1-1/2 8 16 170 102.06 123.52 2 x 1 x 2 8 16 212 93.08 106.13 2 x 1 x 1 12 24 149 93.08 106.13 2 x 1 x 1-1/2 10 20 177 93.08 106.13 2 x 3/4 x 3/4 12 24 118 91.24 104.11 2 x 3/4 x 2 8 16 219 91.24 104.11 2 x 1/2 x 2 8 16 196 93.08 106.13 2 x 2 x 2-1/2 6 12 327 199.03 310.58 2-1/2 x 2 x 2 5 10 328 198.70 282.81 2-1/2 x 2 x 2-1/2 4 8 408 199.03 310.58 2-1/2 x 2-1/2 x 2 4 8 376 198.42 282.29 2-1/2 x 2-1/2 x 1-1/2 5 10 332 198.42 282.29 2-1/2 x 2-1/2 x 1-1/4 5 10 327 198.42 282.29 2-1/2 x 2-1/2 x 1 5 10 304 198.42 282.29 2-1/2 x 2-1/2 x 3/4 6 12 280 198.42 282.29 2-1/2 x 2-1/2 x 1/2 6 12 282 198.42 282.29 3 x 3 x 2-1/2 3 6 600 303.12 430.01 3 x 3 x 2 3 6 526 265.04 383.04 3 x 3 x 1-1/2 3 6 479 265.04 383.04 3 x 3 x 1-1/4 3 6 381 270.18 390.41 3 x 3 x 1 3 6 436 265.04 383.04 3 x 3 x 3/4 3 6 293 270.18 400.24 4 x 2-1/2 3 3 908 601.85 844.26 4 x 4 x 3 1 2 924 536.70 766.33 5 1 1 2011 1449.43 1621.28 6 1 1 2605 1536.53 1879.04 www.wardmfg.com 3 Sheet #514, Effective: May 5, 2014
STREET TEES STRT & RED PIPE COUPLINGS 1/2 40 120 35 31.06 47.13 3/4 25 75 55 42.10 50.86 1 20 40 89 55.60 80.47 1-1/4 15 30 142 89.06 134.11 1-1/2 12 24 178 127.16 181.52 2 8 16 284 182.00 259.87 CROSSES 1/4 60 240 19 27.12 40.35 3/8 50 150 30 27.68 40.35 1/2 30 90 44 31.49 40.45 3/4 20 60 66 38.42 49.30 1 15 30 102 47.25 68.06 1-1/4 10 20 159 76.75 98.48 1-1/2 8 16 207 95.05 119.55 2 5 10 315 157.36 227.99 SIDE OUTLET ELBOW 1/2 45 135 34 29.34 43.84 3/4 20 80 47 32.15 40.43 1 20 40 75 61.61 65.97 SIDE OUTLET TEE 1/2 25 39 38.14 48.48 3/4 15 60 61 48.74 61.20 1 20 40 94 68.12 86.70 1-1/4 12 24 139 122.38 154.56 1/8 70 840 6 13.05 15.12 1/4 40 480 9 11.05 14.07 3/8 40 480 13 11.05 14.07 1/2 60 240 20 8.98 11.31 3/4 50 150 29 10.60 13.06 1 25 46 16.05 21.53 1-1/4 16 64 70 20.54 29.64 1-1/2 18 36 93 27.45 33.74 2 12 24 145 40.00 49.26 2-1/2 8 16 231 108.93 150.47 3 12 12 361 147.18 201.07 4 3 6 581 293.56 427.10 5 1 2 923 609.07 983.93 6 2 2 908 787.52 1113.38 1/4 x 1/8 50 600 7 10.74 13.25 3/8 x 1/4 30 360 11 10.74 13.25 3/8 x 1/8 35 420 10 10.74 13.40 1/2 x 3/8 60 240 16 9.26 11.31 1/2 x 1/4 75 300 16 9.79 12.08 1/2 x 1/8 75 300 16 10.66 14.91 3/4 x 1/2 60 180 26 10.60 13.22 3/4 x 3/8 45 180 21 12.12 14.95 3/4 x 1/4 45 180 23 12.12 14.95 3/4 x 1/8 70 210 20 12.47 15.26 1 x 3/4 25 41 16.43 20.44 1 x 1/2 30 120 40 16.43 22.04 1 x 3/8 30 120 34 19.07 27.10 1 x 1/4 45 135 32 18.79 26.52 1-1/4 x 1 15 60 67 20.54 28.02 1-1/4 x 3/4 25 75 58 20.54 28.02 1-1/4 x 1/2 25 75 52 23.67 34.70 1-1/2 x 1-1/4 12 48 89 25.95 34.14 1-1/2 x 1 25 50 99 30.08 36.11 1-1/2 x 3/4 15 60 71 33.91 36.11 1-1/2 x 1/2 20 60 66 30.08 40.82 2 x 1-1/2 9 27 138 37.72 49.26 2 x 1-1/4 9 27 109 43.13 52.03 2 x 1 12 36 106 40.82 49.26 2 x 3/4 12 36 101 43.13 58.92 2 x 1/2 12 36 49.02 58.92 2-1/2 x 2 7 14 240 96.24 152.36 2-1/2 x 1-1/2 7 14 224 112.17 155.29 2-1/2 x 1-1/4 10 20 183 109.67 152.15 2-1/2 x 1 10 20 175 109.67 152.15 3 x 2-1/2 5 10 370 150.03 202.36 3 x 2 6 12 324 124.41 191.28 3 x 1-1/2 6 12 299 150.03 202.36 3 x 1-1/4 6 12 297 152.88 206.26 3 x 1 6 12 311 152.88 206.26 4 x 1-1/2 3 6 384 300.77 481.54 4 x 2-1/2 3 6 550 300.77 437.99 4 x 2 3 6 548 300.77 437.99 4 x 3 3 6 571 300.77 437.99 www.wardmfg.com 4 Sheet #514, Effective: May 5, 2014
CAPS 1/8 120 1440 4 8.70 11.23 1/4 80 960 5 8.70 11.23 3/8 60 720 8 8.70 10.89 1/2 75 300 13 6.65 8.36 3/4 40 160 21 8.98 12.08 1 25 31 10.83 13.25 1-1/4 20 80 45 14.16 19.27 1-1/2 18 54 56 19.26 24.61 2 12 36 93 25.20 31.10 2-1/2 20 40 160 62.60 98.99 3 24 24 236 93.08 119.93 4 6 12 397 145.24 238.21 6 2 4 1052 580.20 LOCKNUT 1/8 250 3000 2 7.39 7.54 1/4 125 1500 3 7.39 7.54 3/8 125 1500 3 10.26 11.51 1/2 150 600 8 8.65 9.71 3/4 90 360 12 9.56 10.92 1 60 240 18 18.22 20.66 1-1/4 45 180 27 15.10 19.04 1-1/2 45 135 46 21.03 24.64 2 25 75 59 34.88 43.76 EXTENSION PIECES 1/2 75 300 16 26.50 40.43 3/4 40 160 31 39.08 60.49 1 30 90 42 56.32 75.71 1-1/4 30 60 63 64.41 80.57 1-1/2 20 40 88 77.07 104.52 2 15 30 132 90.16 135.13 HEXAGON BUSHINGS 1/4x1/8 120 1440 3 11.84 17.06 3/8x1/8 75 900 6 11.84 17.06 3/8x1/4 75 900 4 11.84 17.06 1/2x3/8 150 600 8 11.84 17.06 1/2x1/4 150 600 9 11.84 17.06 1/2x1/8 150 600 11 11.84 17.06 3/4 x 1/2 75 300 11 10.74 15.80 3/4 x 3/8 75 300 12 11.63 19.57 3/4 x 1/4 75 300 14 11.63 17.60 3/4 x 1/8 75 300 17 11.63 19.57 1 x 3/4 50 200 19 11.05 17.86 1 x 1/2 50 200 23 11.05 18.91 1 x 3/8 50 200 19 14.78 32.68 1 x 1/4 50 200 20 14.39 20.84 1 x 1/8 50 200 21 13.43 18.57 1-1/4 x 1 30 120 30 14.23 24.08 1-1/4 x 3/4 30 120 42 14.23 24.08 1-1/4 x 1/2 30 120 33 15.87 26.45 1-1/4 x 3/8 30 120 27 16.59 30.11 1-1/4 x 1/4 30 120 30 18.70 30.11 1-1/2 x1-1/4 25 75 32 18.12 29.09 1-1/2 x 1 25 75 48 15.85 31.50 1-1/2 x 3/4 25 75 42 18.07 34.95 1-1/2 x 1/2 25 75 43 18.07 34.95 1-1/2 x 3/8 25 75 38 21.89 38.26 1-1/2 x 1/4 25 75 40 21.89 38.26 2 x 1-1/2 20 60 70 24.08 33.69 2 x 1-1/4 20 60 86 21.61 38.44 2 x 1 20 60 68 21.61 38.44 2 x 3/4 20 60 71 23.05 40.65 2 x 1/2 20 60 63 27.28 43.65 2 x 3/8 20 60 61 27.28 44.55 2-1/2 x 2 15 30 98 36.29 54.97 2-1/2 x 1-1/2 15 30 137 36.60 61.99 2-1/2 x 1-1/4 15 30 111 39.30 63.20 2-1/2 x 1 15 30 101 39.30 63.20 2-1/2 x 3/4 15 30 96 39.30 63.20 2-1/2 x 1/2 15 30 157 39.30 63.20 3 x 2-1/2 12 24 187 50.56 78.46 3 x 2 12 24 207 49.77 74.19 3 x 1-1/2 12 24 167 53.27 81.79 3 x 1-1/4 12 24 176 54.35 83.46 3 x 1 12 24 147 54.35 83.46 3-1/2 x 3 8 16 187 95.05 145.24 4 x 3 5 10 370 98.67 163.33 4 x 2-1/2 5 10 341 98.67 174.90 4 x 2 5 10 300 98.67 174.91 4 x 1-1/2 5 10 240 104.28 174.91 CAST IRON FLOOR FLANGES CLASS 125 3/8 25 75 67 24.08 51.08 1/2 25 50 66 24.08 51.08 3/4 15 45 72 25.95 57.03 1 15 30 98 33.66 62.72 1-1/4 10 30 102 36.04 71.42 1-1/2 8 24 136 39.30 89.12 2 8 16 219 51.22 117.41 www.wardmfg.com 5 Sheet #514, Effective: May 5, 2014
TEES COUPLINGS AND REDUCERS 1/4 120 240 29 45.99 87.87 3/8 90 180 43 48.68 89.55 1/2 30 60 68 61.99 112.07 3/4 20 40 108 66.96 123.44 1 12 24 157 80.46 152.13 1-1/4 10 20 254 115.31 217.18 1-1/2 6 12 332 134.50 225.86 2 4 8 530 198.48 361.07 2-1/2 2 4 866 469.13 1109.88 3 1 2 1271 687.78 1293.89 4 1 2 2063 1905.70 3230.99 3/4 x 1/2 30 60 92 98.81 163.91 1 x 3/4 15 30 140 120.81 215.29 1 x 1/2 16 32 127 120.81 195.69 1-1/4 x 1/2 12 24 202 168.17 196.07 1-1/4 x 1 12 24 222 166.87 285.69 1-1/4 x 3/4 12 24 199 160.74 285.69 1-1/2 x 1 10 20 267 195.68 276.24 1-1/2 x 1-1/4 8 16 305 214.30 450.82 1-1/2 x 1/2 10 20 233 204.72 276.24 1-1/2 x 3/4 10 20 245 204.72 276.24 2 x 1/2 6 12 353 260.13 388.96 2 x 3/4 6 12 361 260.13 388.96 2 x 1 5 10 395 260.13 303.11 2 x 1-1/4 5 10 436 315.42 656.54 2 x 1-1/2 5 10 472 293.32 519.46 2-1/2 x 2 4 8 332 719.27 920.22 3 x 2 2 4 967 1334.70 2445.55 45º ELBOWS 1/4 180 360 19 54.31 73.09 3/8 120 240 28 54.31 73.09 1/2 40 80 42 60.46 111.38 3/4 30 60 68 67.21 128.81 1 20 40 104 74.37 140.75 1-1/4 12 24 169 119.19 218.47 1-1/2 8 16 217 155.38 282.64 2 6 12 362 234.74 391.49 2-1/2 4 8 554 510.00 1017.23 3 2 4 868 670.63 1336.99 4 1 2 1252 1523.18 1931.73 1/4 200 400 17 32.94 40.52 3/8 150 300 27 32.94 58.29 1/2 40 80 41 36.74 59.81 3/4 30 60 65 42.26 67.55 1 20 40 101 48.34 89.32 1-1/4 12 24 166 57.47 116.46 1-1/2 12 24 202 86.03 164.39 2 6 12 348 123.89 199.09 2-1/2 4 8 548 221.93 509.09 3 2 4 758 319.73 543.79 4 2 4 1045 425.30 935.35 3/8 x 1/4 120 240 21 43.51 63.02 1/2 x 3/8 200 34 52.38 84.52 1/2 x 1/4 200 31 52.38 84.52 3/4 x 3/8 60 120 46 72.70 131.93 3/4 x 1/2 60 120 50 53.57 102.58 1 x 1/2 50 71 65.25 124.97 1 x 3/4 40 80 79 63.99 122.50 1-1/4 x 1/2 24 48 112 129.90 196.79 1-1/4 x 3/4 20 40 120 87.39 153.12 1-1/4 x 1 20 40 125 84.21 139.18 1-1/2 x 1/2 24 48 144 134.99 243.94 1-1/2 x 1 18 36 163 115.42 189.75 1-1/2 x 3/4 20 40 154 119.82 189.75 1-1/2 x 1-1/4 18 36 181 131.23 209.30 2 x 1-1/4 8 16 271 197.08 390.37 2 x 1-1/2 8 16 276 165.98 271.56 2 x 1/2 12 24 238 194.81 390.37 2 x 3/4 12 24 236 194.81 390.37 2 x 1 12 24 246 167.30 304.22 2-1/2 x 1-1/2 4 8 400 314.11 717.83 2-1/2 x 2 6 12 438 314.11 720.44 3 x 2 4 8 621 460.30 1176.63 3 x 2-1/2 4 8 663 477.92 1176.63 4 x 3 2 4 900 971.31 1834.81 STREET 90 ELBOWS 1/4 180 360 15 43.20 64.98 3/8 120 240 26 48.41 64.98 1/2 40 80 40 56.39 127.32 3/4 30 60 63 80.15 135.21 1 20 40 102 93.98 176.85 1-1/4 12 24 168 129.31 230.97 1-1/2 8 16 221 159.82 296.93 2 6 12 363 248.74 464.08 4 1 2 1407 771.56 1490.58 www.wardmfg.com 6 Sheet #514, Effective: May 5, 2014
CAPS CAST IRON PLUGS - REGULAR CORED 3/8 120 240 14 33.72 41.31 1/2 80 160 22 33.49 60.63 3/4 50 34 42.26 72.47 1 30 60 53 55.42 99.18 1-1/4 20 40 88 61.42 117.67 1-1/2 15 30 111 89.73 164.97 2 10 20 185 124.62 228.27 2-1/2 8 16 292 233.67 525.45 3 5 10 465 322.45 717.43 4 3 6 692 529.59 942.41 UNIONS BRASS TO IRON 1/8 60 240 13 47.86 56.51 1/4 20 240 21 45.55 54.56 3/8 40 160 35 30.71 36.29 1/2 50 44 29.34 36.67 3/4 35 70 60 34.97 43.52 1 20 40 91 45.70 54.15 1-1/4 15 30 139 60.63 73.59 1-1/2 10 20 176 74.03 94.26 2 6 12 272 111.86 125.90 2-1/2 4 8 451 269.56 350.27 3 4 8 596 327.26 497.71 4 2 4 1011 809.22 1081.00 UNIONS BRASS TO IRON 1/8 300 3600 1 5.70 9.30 1/4 150 1800 3 5.70 9.30 3/8 1200 5 5.70 9.30 1/2 50 600 9 6.02 11.65 3/4 30 360 15 6.02 11.65 1 20 240 24 7.60 12.75 1-1/4 40 120 41 9.58 19.65 1-1/2 30 90 55 13.33 26.52 2 20 60 85 19.04 33.67 2-1/2 16 32 112 34.70 65.68 3 16 32 166 47.62 93.18 4 6 12 328 99.93 193.39 6 5 10 602 265.51 90 ELBOWS 1/4 180 360 21 36.52 61.75 3/8 120 240 30 32.44 63.01 1/2 40 80 47 42.02 75.04 3/4 30 60 75 47.52 84.21 1 20 40 116 60.69 107.96 1-1/4 12 24 186 88.53 169.59 1-1/2 8 16 245 104.35 183.86 2 6 12 397 150.15 308.96 2-1/2 4 8 623 389.18 662.41 3 2 4 941 446.92 811.04 4 1 2 1482 1021.03 2357.03 1/8 200 400 23 79.52 95.75 1/4 120 240 32 74.57 95.75 3/8 90 180 46 75.44 97.64 1/2 40 80 60 61.04 92.60 3/4 30 60 84 67.58.42 1 18 36 143 88.24 133.18 1-1/4 12 24 221 143.95 185.72 1-1/2 10 20 249 150.71 223.57 2 6 12 410 186.66 268.36 2-1/2 4 8 655 601.84 748.61 3 3 6 1059 778.61 1266.13 4 1 2 1868 2471.21 3175.51 www.wardmfg.com 7 Sheet #514, Effective: May 5, 2014
Distributed by: TERMS AND CONDITIONS OF SALE: 1. PRICES: This price sheet susedes all previous issues. s in price sheets are subject to change without notice. s apply only to standard sizes as listed in catalog. 2. APPROVAL & ACCEPTANCE OF ORDERS: All orders are accepted on the basis of prices in effect at the time of shipment. 3. TAXES: Any Manufacturer or Sales Tax payable on the transaction under any effective statute will be added to the prices and terms quoted, unless a valid exemption certificate is on file. 4. credit TERMS: Two cent cash discount tenth prox., - Net 30 days. Unless otherwise stated. 5. DELIVERY & SHIPMENT OF GOODS: All goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Completion of all orders accepted and fulfillment of all agreements or contracts entered into are subject to any delay which might be occasioned by labor disputes, fires,accidents, embargoes, trade restrictions, governmental directives or other causes beyond our control. All promises of shipment will be as closely estimated as possible. We use our efforts in every case to ship within the time promised, but cannot guarantee to do so. All claims for shortage must be made on receipt of goods. We prove our count by weighing the package. Claims for shortage are subject to that test. Typographical, clerical, arithmetical errors or omissions in orders, invoices, quotations, price schedules, acknowledgments, or other documents are subject to correction. 6. RETURN OF GOODS: No goods will be taken back and credited without prior approval and issuance of a return goods authorization (RGA) number. All fittings returned with our mission must be goods sold by Ward Manufacturing, LLC, and in clean saleable condition. Credit will only be allowed on the basis of prices agreed upon. If product returned is a result of a customer ordering error or overstocking situation, the credit will be less 20 cent to cover handling costs, less any costs of returning to a saleable condition, and less transportation charges on original and return shipments. Orders for special goods are not subject to cancellation for any reason after work has been started on them, except upon agreement to make payment for all work which has been formed. 7. WARRANTY: Seller warrants the material to be free of defects in material and workmanship, under normal use, pro maintenance and pro oation, for a iod of one year from date of delivery to a common carrier for shipment to buyer or his designated agent. The obligation of the seller Is limited to (1) repair of the material, or (2) replacement of any component or components proven defective in material or workmanship, or (3) refund of the purchase price. Seller shall have no liability for the cost of removal or reinstallation with respect to any replaced or repaired product. The election of said remedies shall be determined by seller in its sole discretion and shall be considered final disposition. All implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed and excluded. This warranty is In lieu of all other warranties, guarantees, agreements and similar obligations of seller; in no event shall seller be liable for consequential or Incidental damages. 8. FREIGHT TERM: Shipments of $2,000 net or more will be prepaid in the continental U.S. (except Alaska). We reserve the right to choose shipping point and carrier. 9. carton & BOX QUANTITY ADJUSTMENT: On orders received for less than master carton or box quantities, we reserve the right to adjust to the next carton or box above the number of pieces shown on the order. Items subject to adjustment are identified with stars in the price sheet. 10. WEIGHTS: The weights piece or pieces given in the price sheet, catalogs, and quotations are not guaranteed, but are approximate and for your convenience. 12. special CONDITIONS: Any additional cost incurred in packaging or in making any special tests or inspection requested by Buyer in addition to those commercially supplied by Ward Manufacturing, LLC., will be charged to Buyer. Such tests and inspections will be made at the factory before date of shipment. Orders for fittings or parts will be subject to a net minimum invoice charge of $35.00 Net plus applicable handling and freight charges. 13. US EXPORT COMPLIANCE: The products sold by Ward Manufacturing, LLC. may be subject to the export control laws and regulations of the United States Government. Buyer may not make any disposition of such products, by way of sale, export, re-export, transshipment or otherwise, except as mitted under applicable U.S.law.