MEDICAL CYLINDER VALVES

MEDICAL CYLINDER VALVES

3 TABLE OF CONTENTS INTRODUCTION P.004 Ceodeux meditec solutions P.004 Quality first... P.004 The main medical gases P.005 Product range overview P.006 Technology overview P.008 How to select valves P.012 VALVES INTEGRATED WITH PRESSURE REGULATOR P.014 M706/M713 LIFE+ P.014 M741 LIFE-s P.016 Protective Guard P.018 CYLINDER VALVE WITH RESIDUAL PRESSURE VALVE P.019 M510/M515/M501/M506/M520/M525 Standard RPV Cylinder Valve P.019 M540/M545/M530/M535 Standard RPV off line P.020 M511/M516/M508/M521/M526 Standard RPV in line P.021 M978/M979/C878 Standard RPV in line P.022 M100/M105/M040/M045/M200/M205 Standard cylinder valve P.023 STANDARD CYLINDER VALVE P.024 M972/M973/M974/M975 standard cylinder valve small cone P.024 D113 Packed Valve P.025 D413 Tied Diaphragm P.026 SPECIAL NITRIC OXIDE CYLINDER VALVE P.027 M966 Pin index Cylinder Valve P.027 M650 Pin index RPV Cylinder Valve P.028 0476 ISO 13485 QUALITY ASSURANCE All Rotarex regulators are produced in Europe in accordance with international standards (ISO; CGA...) and are guaranteed to provide safe and reliable performance in operation. All locations are ISO 13485.

4 INTRODUCTION CEODEUX MEDITEC SOLUTIONS Patient therapy and safety is our main focus in the design, installation, commissioning and operation of medical gas equipment QUANTITY OF SUPPLY Valves are designed in such a way sufficient medical gas capacity can be ensured in order to provide the required flows of gases for the intended number of patients to be treated at any time. IDENTITY OF SUPPLY All our products are designed, produced and controlled for a specific medical gas. All points to which the user or technical staff can connect are gas specified. There is no risk of misconnection. QUALITY OF SUPPLY Our valves maintain quality of supplied medical gases thanks to appropriate selection of material, components cleanliness and internal filtration equipment. Products designs ensure safe supply by minimizing ignition risks, by avoiding patient poisoning risks and by guaranteeing very good performances for accurate therapies. QUALITY FIRST... CEODEUX MEDITEC products are designed, validated, produced and controlled during their whole lifetime according to a very stringent quality system which exceeds requirements of ISO 13485 standard. DESIGN All our products comply with local and international standards. Some reference standards: ISO 10524-3 / CGA E-18 ISO 10297 / CGA V1 ISO 15996 ISO 11117 VIPR Standard Cylinder Valves RPV Valves Protection Guard Product design is done through a risk assessment process and is combining proven technologies and innovation to reach the best performance levels. VALIDATION Product validation process guarantees that products are developed and produced to withstand the complete lifecycle (installation, commissioning, normal service and maintenance) PRODUCTION All products are produced in a controlled environment in order to maintain cleanliness An individual traceability is ensured with individual serial number Products are individually controlled and data are recorded for a perfect product management. All products are cleaned according to ISO 15001

INTRODUCTION 5 THE MAIN MEDICAL GASES Symbol Name Application Source Type O 2 Air N 2 O CO 2 Air N 2 Oxygen Air Nitrous Oxide Carbon Dioxide Surgical Air Nitrogen Oxygen is one of the most extensively used gases for respiratory therapy and life-support and is additionally used in anesthetic procedures. Medical air is mainly used in respiratory therapy as a power source for patient ventilators, and for blending with oxygen. It is also used as the driving gas for nebulized drugs and chemotherapy agents. Nitrous oxide is used for anesthetic and analgesic purposes, being mixed with air, oxygen, and nebulized agents. Carbon dioxide is used less commonly now as a respiratory stimulant, and for insufflation during surgery. Surgical air (of medical air quality) is also used, at a higher pressure, to power a variety of surgical tools and other devices such as tourniquets. As an alternative, nitrogen can be used for the same purpose as surgical air. Compressed gas cylinder Liquid tank Concentrator Compressor Compressed gas cylinder Liquefied gas cylinder Liquefied gas cylinder Compressor Compressed gas cylinder Compressed gas cylinder

6 INTRODUCTION PRODUCT RANGE OVERVIEW VIPR LIFE + P. 14 LIFE-S P. 16 Gas type O 2 O 2 Material Chrome plated brass Chrome plated brass Inlet pressure M706: 200 bar/2900 psig M709: 300 bar/4350 psig 200 bar/2900 psig Gas type Material Inlet pressure M706/M713 PROTECTIVE GUARD P. 18 Ø Plastic PA6.6 Ø STANDARD CYLINDER VALVE WITH RESIDUAL PRESSURE VALVE OFF LINE M510/M515 P. 19 M501/M506 P. 19 M520/M525 P. 19 M540/M545 P.20 M530/M535 P. 20 Gas type O 2 CO 2 Various gases O 2 Various gases Material Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Inlet pressure 200 bar/2900 psig 200 bar/2900 psig 200 bar/2900 psig 300 bar/4350 psig 300 bar/4350 psig STANDARD CYLINDER VALVE WITH RESIDUAL PRESSURE VALVE IN LINE M511/M516 P. 21 M508 P. 21 M521/M526 P. 21 M978/M979 P. 22 SMALL CONE Gas type O 2 CO 2 Various gases O 2, various gases o C878 P. 22 INTEGRATED GAUGE Material Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Inlet pressure 200 bar/2900 psig 200 bar/2900 psig 200 bar/2900 psig 200 bar/2900 psig 200 bar/2900 psig

INTRODUCTION 7 PRODUCT RANGE OVERVIEW STANDARD CYLINDER VALVE M100/M105 P. 23 C040/C045 P. 23 M200/M205 P. 23 M972/M973 P. 24 SMALL CONE Gas type O 2 CO 2 Various gases O 2 Various gases M974/M975 P. 24 SMALL CONE Material Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Chrome plated brass Inlet pressure 200 bar / 2900 psig 200 bar / 2900 psig 200 bar / 2900 psig 200 bar/2900 psig 200 bar/2900 psig SPECIAL NITRIC OXIDE MIXTURES CYLINDER VALVE D113 PACKED VALVE P. 25 D413 TIED DIAPHRAGM P. 26 Gas type No No Material Stainless steel Stainless steel Inlet pressure 200 bar/2900 psig 200 bar/2900 psig PIN INDEX VALVE M966 PIN INDEX CYLINDER VALVE P. 27 M650 P. 28 PIN INDEX RPV CYLINDER VALVE Gas type O 2 O 2 Material Chrome plated brass Chrome plated or natural brass Inlet pressure 232 bar/3364 psig 232 bar/3364 psig

8 INTRODUCTION TECHNOLOGY OVERVIEW Ceodeux Meditec uses 4 main technologies to achieve a proper and reliable gas use from the cylinder: VIPR Valve with integrated pressure regulator Design to save your time: Easy and Ready to use medical valve with in-built regulator, flow meter, contains gauge and outlet pressure connector. Compact and lightweight : ideal for small cylinder Fully protected by an ergonomic plastic guard Filtration system ensures safety against ignition. Flow meter with orifice plate precision design increase high flow precision and low flow precision for pediatric patients PRODUCT FINDER CEODEUX MEDITEC VIPR M706 P. 014 M713 P. 014 M741 P. 016 RESIDUAL PRESSURE VALVE Open/close fonctionnalities Improved safety thanks to RPV technology included (avoid all contamination risks) Safe, long, trouble free life under all service conditions Exist in offset and inline version PRODUCT FINDER CEODEUX MEDITEC RPV valve M510/M515/M501/M506/M520/M525/M540/M545 M530/M535/ M511/M516/M508/M521/M526 P. 024 M978/M979/C878 P. 022 STANDARD CYLINDER VALVE Standard open/close fonctionnalities High life cycle thanks to smart choice of materials Safe, long, trouble free life under all service conditions PIN INDEX VALVE Standard open/close fonctionnalities Yoke outlet connection (PIN INDEX System) Key operated or handwheel manipulation High life cycle thanks to smart choice of materials Safe, long, trouble free life under all service conditions PRODUCT FINDER CEODEUX MEDITEC Standard valve M100/M105/M040/M045/M200/M205/ M972/M973/M974/M975 P. 024 D113 P. 025 D413 P. 026 PRODUCT FINDER CEODEUX MEDITEC Pin Index valve M966 P. 027 M650 P. 028

INTRODUCTION 9 TECHNOLOGY OVERVIEW DETAILED FUNCTIONNALITIES OF OUR INTEGRATED VALVES VALVE INLET Anti dust tube according to the last amendment of EN ISO 10524-3 Better protection of the valve against contamination and eliminates the risk of ignition in case accumulation of particles in a filter Excess flow device Additional safety to avoid excess flow risks and optimize normal flow in use FILLING PORT Approved for 300 bar (tested at 360 bar) Active and non-active Spring in Copper Beryllium material highly compatible with oxidizing gases O-rings in EPDM High leak integrity due to seat O-ring and 2-parts design, including degasing hole High performance of the filling port against ignition with protruding pin design Filling port fully integrated in the valve body Endurance performance is twice the requirment of the ISO standard (2000 cycles) PRESSURE GAUGE NEW Electronic system available (please refer to page 9 for further informations) Design fully in accordance with the EN ISO 10524-3 including a flow restrictor to prevent part ejection in case of failure Direct drive technology used for the Bourdon tube to reduce consequences of vibration or shocks Gauge display tight to water contamination Safety Relief valve with 3 holes on the glass and tightness evidence sticker Active pressure gauge for permanent content visibility OUTLET PRESSURE: MEDICAL CONNECTOR Same outlet as wall outlet used in hospitals with design according national standard Make connection to medical equipment possible to transport patients Minimum outlet pressure guaranteed when high flow is required by downstream equipment SHUT-OFF VALVE 5000 cycles according CGA V9 (under 360 Bar) None rotating lower spindle to avoid particles generation Very low torque design to operate the shut-off valve up to 300 bar ISO 10297

10 INTRODUCTION TECHNOLOGY OVERVIEW DETAILED FUNCTIONNALITIES OF OUR INTEGRATED VALVES REGULATOR SAFETY RELIEF DEVICE Integrated into the regulator design Quicker reaction - Large contact surface to increase sensitivity and reactivity to overpressure No risk to damage the device High flow through the device due to the large diameter and large venting holes FLOWMETER AND HOSEBARB 12 positions Continuous flow even in between setting positions during handwheel operation No possible positioning of the handwheel in-between settings High precision of the flows 10 year life time without maintenance Easy replacement of the handwheel High leak integrity performance Flow range: Pediatric applications 0 -> 2 LpmHomecare 0 -> 6 LpmHospital 0 -> 15/ 0 -> 25 Lpm Possibility to be customed PRESSURE REGULATOR Piston-type regulator Improved safety and reliability Direct acting valve (decrease pressure curve) according to ISO 10524-3 and CGA-18 High compatible materials with Oxygen and Medical applications RESIDUAL PRESSURE VALVE Protection of the cylinder against external contamination High endurance performance in terms of leak integrity and functionality According standard ISO15996 100.000 cycles Specific seat design to protect sealing O-ring during operation 3 bar residual pressure guaranteed at maximum flow setting

INTRODUCTION 11 TECHNOLOGY OVERVIEW CEODEUX MEDITEC INTELLIGENT ELECTRONIC SYSTEM CHANGE THE WAY YOU USE GAS GROUNDBREAKING INNOVATION TO PERFECTLY REACH OXYGEN THERAPY REQUIREMENTS: Reactivity : Quick and accurate calculation of remaining time Safety : Perfectly suitable for high pressure pure Oxygen environnement Patient & Medical staff Services : Improved cylinders fleet management. Quicker operations in emergency situations Bluetooth for wireless communication Optimization : Longer cylinder use thanks to accurate cylinder content management Get in touch with excellence NEW CONTROL GAS USE THANKS TO INFORMATION TRANSPARENCY NEW GAS 6 1 CYLINDER CONTENT BAR GRAPH (%) Cylinder content* bar graph (%). Visual indications of real quantity of gas into cylinder whatever pressure and temperature parameters are. 1 2 3 4 5 2 COLOR CODED CYLINDER CONTENT LEVEL INDICATIONS Red: Warning area : < 10% cylinder content Yellow : Pre-Warning area : 10% < cylinder content < 30% Green : Confortable area : >30% cylinder content 3 PRESICE CYLINDER PRESSURE Precise cylinder pressure Cylinder pressure measurement at real conditions Bar psig - kpa units available. 4 REMAINING TIME FOR USE AT SELECTED FLOW RATE Remaining time for use at selected fl ow. Accurate and quick calculation of the remaining time according to fl ow selection and cylinder content. Precise displayed unit: hh:mm 5 CALCULATION SYMBOL FLOW 6 AVAILABLE WIRELESS BLUETOOTH COMMUNICATION NEW GAS THERAPY OPTIMIZATION THANKS TO ANTICIPATION * Quantity of gas into the cylinder Intelligent and complete alarm system to clearly indicate when user face a critical situation. Audible and visible alerts for enhanced patient safety SYSTEMS FAILURES NORMAL USE ALARMS Indicate when gas flow is critical (Less of 10 minutes of use or 10 bar remaining in the cylinder) Indicate when battery level of the system doesn t guarantee anymore the accurate functionning of the valve Indicate when a sensor default was detected into the system Indicate when an electronic failure was detectead into the system Indicate when environment is not conformed with valve functioning (e.g. high or low temperature)

12 INTRODUCTION HOW TO SELECT VALVES BODY MATERIALS Most Ceodeux Meditec valves are available in brass or chrome plated brass. Chrome plated or Raw brass: The most commonly used material for high velocity oxygen applications due to its cost effectiveness, good strength, resistence and low-friction flow properties. Gas Compatibility: make sure the body material is compatible with the gas type you will be using. Need more information? One of our material engineers would be happy to discuss the pros and cons of each option to help you choose the best solution. INLET PRESSURE Different models are designed for different inlet pressure to fit with your applications need (working pressure). For high pressure (200bar/3000psig) the Ceodeux Meditec valves range covers any requirements. The available options are clearly indicated on each product page. Please specify required inlet pressures when ordering. We can also accommodate special requests. OUTLET PRESSURE Especially for VIPR: different models are designed for different outlet pressure to fit with your applications need (working pressure). For low pressure needed in use (4,5bar/50psig) and for accurate flow (from 0-2 to 0-25 Lpm) the Ceodeux Meditec VIPR range covers any requirements. The available options are clearly indicated on each product page. Please specify required inlet pressures when ordering. We can also accommodate special requests. INLET CONNECTIONS Specific cylinder valve connections are required for each gas type. The most common connection types are 3/4-16 UNF and 25E.Other standards and dimensions are available on request. OUTLET CONNECTIONS VIPR: Specific outlet connections are available (medical connector types). According to your national standards the Ceodeux Meditec valves range covers any requirements. Valves: According to your national standards and according to upstream device to be connected (pressure regulator, flex hose,...) the Ceodeux Meditec valves range covers any requirements. Specific flow outlet connections are available (hose barb) according to EN 13544-2 and supplied from flow selector.

INTRODUCTION 13 HOW TO SELECT VALVES To choose the right valve for your application and get the best results, you should identify the following technical parameters: TECHNICAL PARAMETER Working pressure Outlet pressure (only for VIPR) Gas type or medical mixture Material: raw brass or chrome plated Inlet connection: 17E, 25E, 3/14-16 UNF Outlet connection valve- according to standards Filling port (only for VIPR): acc ISO 5145 or CGA V1.,... Residual pressure: if requested or no Gauge: if specific request Temperature range: -20 C/+65 C or specific Description of the final application: hospital homecare, emergency, or other Guard: select a model and confirm type of cylinder and cylinder weight Guard color: white or green / Other colors on request + marking Bed hanger (only for VIPR): if required or not Environment: if special Product applicable standards: EN ISO 10524-3 (VIPR) EN ISO 10297, CGA E-18 Certification / Approval / Registration CE marked - 93/42/EEC European Medical Device Directive, FDA 510(k) USA, TGA (Therapeutic Goods Administration) - Australia, Health Canada Singapore, ANVISA Brasil Each product page is designed to provide you the essential technical information at a glance: 8 CYLINDER VALVES INTEGRATED WITH PRESSURE REGULATOR CYLINDER VALVES INTEGRATED WITH PRESSURE REGULATOR 9 M706 ALPINOX INTEGRATED VALVE SPECIFICATIONS - Medical integrated valve for Oxygen and others medical gases - For all hospital and homecare applications - Complies with the most stringent standards and requirements - Approved by the major medical authorities worldwide - Available in many different configurations ALL FUNCTIONS IN ONE DEVICE - Active Pressure Measurement - High Pressure Shut Off Valve - Filling Port with Check Valve - Residual Pressure Valve - Pressure Regulator - Safety Relief Device - Flow Selector - Medical Outlet Connection (Optional) REGULATORY - Medical CE certified according to MDD 93/42/EEC amended 2007/47/EC - π certified according TPED Directive 2010/35/EU - Product complies with EN ISO 10524-3 and CGA E-18 Inlet Connection 17E / 25E / M18 / ¼ - 16 UNF Filling Port Flow Outlet Pressure Outlet OPTIONS ISO 5145 / CGA V1 with check valve Hose Barb Acc. to national standards Inlet pressure Temperature range Outlet pressure Flow range 12 pos. 200 bar / 2900 psi -20 C to +60 C 4.5 bar (EU) 3.5 bar (USA) 0-6 Lpm / 0-15 Lpm / 0-25 Lpm Protection Guard CSN / MIF / CBNE with bed hanger Inlet Device Filter / Anti-dust tube / Excess Flow device Body Seats PA 6.6 O-ring Filters Chrome plated brass EPDM Sintered Bronze 20 μm M706 M706 with plastic guard KEY ADVANTAGES Simple Use - Ready-to-use Design - Simple, quick and intuitive function to deliver gas - Easy access to all functions High Performances - Proven and Reliable Single stage piston regulator - High Pressure and Flow Stability and Accuracy outstanding flow outlet pressure stability. Exceptionally accurate. - Wide flow ranges for many applications Safety First - No high pressure manipulation - Shut off valve to isolate high pressure if required - Preset integrated pressure relief device - Flow selector design reducing likelihood of being set between two settings - Continuous flow between settings - Active pressure gauge for a permanent indication - RPV function in order to avoid any potential contamination - Choice of material ensures patient health and safety Others versions and possibilities available upon request PRODUCT REFERENCES Gas Working pressure Inlet Connection Filling port Outlet Pressure Flow Range Medical connector O 2 200 bar 25E ISO 5145 4.5 bar 0-25 Lpm DIN 13260-2 M70600153 M70600152 O 2 200 bar 25E ISO 5145 4.5 bar 0-25 Lpm NFS 90-116 M70600130 O 2 2000 psi ¼ - 16 UNF CGA 540 50 psi 0-25 Lpm DISS 1240 M70600109 O 2 200 bar 17E ISO 5145 4.5 bar 0-15 Lpm None M70600121 N 2 O / O 2 135 bar 25E ISO 5145 4.5 bar 0-15 Lpm NFS 90-116

14 VIPR M706/M713 LIFE+ Medical integrated valve for Oxygen and others medical gases For all hospital and homecare applications Complies with the most stringent standards and requirements Approved by the major medical authorities worldwide Available in many different configurations ALL FUNCTIONS IN ONE DEVICE Active Pressure Measurement High Pressure Shut Off Valve Filling Port with Check Valve Residual Pressure Valve Pressure Regulator Safety Relief Device Flow Selector Medical Outlet Connection (Optional) REGULATORY Medical CE certified according to MDD 93/42/EEC amended 2007/47/EC π certified according TPED Directive 2010/35/EU Product complies with EN ISO 10524-3 and CGA E-18 Standard manometer available Other combination available + Shut Off Valve Config. 1 Medical Outlet Connector Flow Outlet + Pressure Gauge Filling Port Shut Off Valve Config. 2 Filling Port Medical Outlet Connector Flow Outlet + Pressure Gauge

VIPR 15 SPECIFICATIONS Inlet Connection Filling Port Flow Outlet Pressure Outlet OPTIONS Protection Guard 17E / 25E / M18 / 3/4-16 UNF ISO 5145 / CGA V1 with check valve Hose Barb MAIN FUNCTIONNALITIES Acc. to national standards CSN2 (see main picture) / MIF (see on page 19) with bed hanger Inlet pressure Temperature range Outlet pressure Flow range 12 pos. Inlet Device M706:200 bar / 2900 psig M713:300bar -20 C to +60 C 4.5 bar (EU) 3.5 bar (USA) 0-6 Lpm / 0-15 Lpm / 0-25 Lpm Filter / Anti-dust tube / Excess Flow device Body Chrome plated brass Seats PA 6.6 O-ring EPDM Filters Sintered Bronze 20 μm To better understand roles and benefits of each of these functions please refer to our technological review section on page 9 1 VALVE INLET 2 ANTIDUST TUBE 9 3 6 7 4 10 5 8 3 FILLING PORT 4 GAUGE: AVAILABLE IN STANDARD VERSION OR DIGITAL VERSION (SEE DETAILS ON PAGE 11) 5 RPV 6 HOSE BARB 7 FLOWMETER 8 REGULATOR & SAFETY RELIEF DEVICE 1 2 Config 1 9 SHUT OFF VALVE 10 OUTLET PRESSURE: MEDICAL CONNECTOR PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Filling Port HP Safety Outlet Pressure Flow Range Pressure outlet Flow outlet Inlet options Guard type Guard Color M706/M713 O 2 A 200 ISO N 3.5 2 N HB6 EFD CSN W O 2 O 2 17E A 200bar 200 ISO ISO None N 3.5bar 3.5 0-2Lpm 2 None N 5145 Hose Barb HB6 Excess flow Ø6mm device Air AIR 25E B 300bar 300 CGA CGA CGA CGA 4.5bar 4.5 0-6Lpm 6 AFNOR NF Anti dust N 2 O/ N 2O 3/4"- CCS 2000 O 2 16 UNF psig 3000 psig w14, 5MPa V1 S1.1 2000 UNI UNI JIS JIS 0-15Lpm 15 DIN DIN 3000 JIS JIS 0-25Lpm 25 BS BS 14.5 SS SS JIS JIS tube Configuration EFD CSN CSN White W Config 1 ADT MIF MIF Green G Config 2 AS DISS AS DISS

16 VIPR M741 LIFE-S Compact Medical Integrated Valve for Oxygen and others medical gases For all hospital and homecare applications For situations where performance, compactness and light weight are required Available in many different configurations Provided with a plastic integrated hanger to carry and protect the valve ALL FUNCTIONS IN ONE DEVICE Active Pressure Measurement Cylinder Safety Device Filling Port with Check Valve Pressure Regulator Safety Relief Device Flow Selector Medical Outlet Connection (Optional) REGULATORY Product complies with CGA E-18 Medical CE certified according to MDD 93/42/EEC amended 2007/47/EC Standard manometer available

VIPR 17 SPECIFICATIONS Inlet Connection Filling Port Flow Outlet 3/4-16 UNF CGA 540 with check valve Hose Barb Inlet pressure Temperature range Outlet pressure 134 bar 2000 psig / bar -20 C to +65 C 3.5 bar/50 psig Body Chrome plated brass Seats PA 6.6 O-ring EPDM Pressure Outlet DISS 1240 9/16-18UNF Flow range 12 pos. 0-6 Lpm / 0-15 Lpm / 0-25 Lpm Filters Sintered Bronze OPTIONS Inlet Device Filter / Anti-dust tube / Excess Flow device MAIN FUNCTIONNALITIES To better understand roles and benefits of each of these functions please refer to our technological review section on page 9 1 VALVE INLET 2 FILLING PORT 5 4 3 GAUGE 4 HOSE BARB 6 5 FLOWMETER 6 REGULATOR & SAFETY RELIEF DEVICE 2 3 7 OUTLET PRESSURE: MEDICAL CONNECTOR 7 1 PRODUCT CONFIGURATOR Gas Inlet Working Connection Pressure Filling Port HP Safety Outlet Pressure Flow Range Pressure outlet Flow outlet Inlet options Guard Color M741 O 2 A 200 ISO N 3.5 2 N HB6 EFD O 2 O 2 17E A 200bar 200 ISO 5145 ISO None N 3.5bar 3.5 0-2Lpm 2 None N Hose Barb HB6 Excess flow EFD White W Ø6mm device Air AIR 25E B 300bar 300 CGA V1 CGA CGA CGA 4.5bar 4.5 0-6Lpm 6 AFNOR NF Anti dust ADT Green G N 2 O/O 2 N2O 3/4"- 16 UNF S1.1 CCS 2000 psig 2000 UNI UNI JIS JIS 0-15Lpm 15 DIN DIN 3000 psig 3000 JIS JIS 0-25Lpm 25 BS BS w14,5mpa 14.5 SS SS tube JIS AS DISS JIS AS DISS

18 VIPR M706/M713 PROTECTIVE GUARD Guards and Caps to protect the valve during service and transportation while giving the product an easy access and a good looking design Designed to protect all products depending on customers specific requirements ALL FUNCTIONS IN ONE DEVICE Available with an optional bed hanger for an easier handling and support REGULATORY Designed and tested according to EN ISO 11117 standard MIF CSN 2 SPECIFICATIONS Connection Permitted mass On valve body / thread W80 x 1/11 Up to 60 Kg Material PA 6.6 Temperature range -20 C to +65 C Dimensions Colors Ø143 mm max. White / Black / Blue / Green OPTIONS Bed Hanger Assembled on the guard or cap (nif) Label Customized labeling and/or marking

RPV VALVE 19 M510/M515/M501/M506/M520/M525 STANDARD RPV OFF LINE High pressure brass cylinder valve for medical gases, O-ring seal type with residual pressure Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Safe, long, trouble free life under all service conditions Designed and tested according EN ISO 10297 and EN ISO 15996 OPTIONS Inlets: 17 E 25 E M 18 US threads Filter Burst disc safety device Thread for dip tube connection Chrome plating Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES SPECIFICATIONS GAS SAFETY O 2 CO 2 VARIOUS GASES WITH WITHOUT M510 M515 M501 M506 M520 M525 Working pressure 200 bar/ 2900 psig Seat orifice size 4 mm O-ring material EPDM Temperature range Helium leak rate at pmax -25 C to +70 C 10-3 mbar l/sec Handwheel material Seat material aluminium polyamid Body material Chrome plated brass PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 ISO 5145 ISO None N N 2 O N 2O 25E B 300bar 300 CGA V1 CGA CGA S1.1 CGA Various gases (*) VG * 3/4"-16 UNF CCS 2000Psig 2000 UNI UNI JIS JIS CO 2 CO 2 3/4" NGT OBS 3000Psig 3000 DIN DIN Eu CO 2 /N 2 O EU AFNOR AFNOR BS BS SS SS AS AS * gas or mixture must be confirmed

20 RPV VALVE M540/M545/M530/M535 STANDARD RPV OFF LINE High pressure brass cylinder valve for medical gases, O-ring seal type with residual pressure Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Safe, long, trouble free life under all service conditions Designed and tested according EN ISO 10297 and EN ISO 15996 OPTIONS Inlets: 17 E 25 E M 18 US threads Filter Burst disc safety device Thread for dip tube connection Chrome plating Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES GAS SAFETY O 2 VARIOUS GASES WITH WITHOUT M540 M545 M530 M535 SPECIFICATIONS Working pressure 300 bar/ 4350 psig Seat orifice size 4 mm O-ring material EPDM Temperature range Helium leak rate at pmax -25 C to +70 C 10-3 mbar l/sec handwheel material Seat material aluminium polyamid Body material Chrome plated brass PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 300bar 3000 ISO 5145 ISO None N N 2 O N 2O 25E B CGA V1 CGA CGA S1.1 CGA Various gases (*) VG * 3/4"-16 UNF CCS UNI UNI JIS JIS 3/4" NGT OBS DIN DIN Eu CO 2 /N 2 O EU AFNOR AFNOR BS BS SS SS AS AS * gas or mixture must be confirmed

RPV VALVE 21 M511/M516/M508/M521/M526 STANDARD RPV IN LINE High pressure brass cylinder valve for medical gases, O-ring seal type with residual pressure Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Safe, long, trouble free life under all service conditions Designed and tested according EN ISO 10297 and EN ISO 15996 OPTIONS Inlets: 17 E 25 E M 18 US threads Filter Burst disc safety device Thread for dip tube connection Chrome plating Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES GAS SAFETY O 2 CO 2 VARIOUS GASES WITH WITHOUT M511 M516 M508 M521 M526 SPECIFICATIONS Working pressure 200 bar/ 2900 psig Seat orifice size 4 mm O-ring material EPDM Temperature range Helium leak rate at pmax -25 C to +70 C 10-3 mbar l/sec handwheel material Seat material aluminium polyamid Body material Chrome plated brass PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 ISO 5145 None N 2 O N 2O 25E B 300bar 300 CGA V1 CGA S1.1 Various gases (*) VG * 3/4"-16 UNF CCS 2000Psig 2000 UNI JIS CO 2 CO 2 3/4" NGT OBS 3000Psig 3000 JIS * gas or mixture must be confirmed

22 RPV VALVE M978/M979/C878 STANDARD RPV IN LINE High pressure brass cylinder valve for medical gases, O-ring seal type with residual pressure Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Safe, long, trouble free life under all service conditions Designed and tested according EN ISO 10297 and EN ISO 15996 OPTIONS Inlets: 17 E 25 E M 18 US threads Filter Burst disc safety device Thread for dip tube connection Chrome plating Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES GAS SAFETY O 2 VARIOUS GASES WITH WITHOUT M978 M979 SPECIFICATIONS Working pressure 200 bar/ 2900 psig Seat orifice size 4 mm O-ring material EPDM Temperature range -25 C to +70 C handwheel material aluminium Body material Chrome plated brass Helium leak rate at pmax 10-3 mbar l/sec Seat material polyamid Specific M978: O 2 M9769: various gases sc878: O 2 + integrated valve PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 DIN DIN None N N 2 O N 2O M18X1,5 RCS Eu CO 2 /N 2 O EU Various gases (*) VG * CO 2 CO 2 * gas or mixture must be confirmed

RPV VALVE 23 M100/M105/M040/M045/M200/M205 STANDARD CYLINDER VALVE - - High pressure brass cylinder valve for medical oxygen - - O-ring seal type Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Safe, long, trouble free life under all service conditions Approved valve design Testing according ISO 10297 and CGA U9 Standard OPTIONS Inlets: 17 E 25 E M 18 US threads Filter Burst disc safety device Thread for dip tube connection Chrome plating Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES GAS SAFETY O 2 CO 2 VARIOUS GASES WITH WITHOUT M100 M105 M040 M045 M200 SPECIFICATIONS Working pressure Temperature range Helium leak rate at pmax 232 bar -25 C to +70 C 10-3 mbar l/sec Seat orifice size Magnetic compatibility handwheel material M100/M105/M200/M205 : 4mm M040/M045: 8mm yes polyamid Seat material O-ring material Body material polyamid EPDM Chrome plated brass PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 300bar 3000 ISO 5145 ISO None N N 2 O N 2O 25E B CGA V1 CGA CGA S1.1 CGA Various gases (*) VG * 3/4"-16 UNF CCS UNI UNI JIS JIS 3/4" NGT OBS DIN DIN Eu CO 2 /N 2 O EU AFNOR BS SS AS AFNOR BS SS AS * gas or mixture must be confirmed

24 STANDARD CYLINDER VALVE M972/M973/M974/M975 STANDARD CYLINDER VALVE SMALL CONE - - High pressure brass cylinder valve for medical oxygen - - O-ring seal type Small cone inlet size Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque under up to 200 bar service pressure MRI compatible Designed and tested acc. EN ISO 10297, EN ISO 15996 Residual pressure setting 1-3 bar Manufactured in cleanroom Inlet with filter Possibility of integrated gauge OPTIONS Inlet: 17E M18 M 14 Without filter Ref catalog: MPR-EN-1115 PRODUCT SERIE FEATURES GAS SAFETY O 2 VARIOUS GASES WITH WITHOUT M972 M973 M974 M975 SPECIFICATIONS Working pressure 200 bar Seat orifice size 2.5 mm Seat material PA 6.6 Temperature range Helium leak rate at pmax -20 C to +70 C 10-3 mbar l/sec Residual pressure handwheel material 1-3 bar aluminium O-ring material Body material Filter material EPDM Chrome plated brass brass sintered PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 DIN DIN None N N 2 O N 2O M18X1,5 RCS Eu CO2/N2O EU Various gases (*) VG * CO 2 CO 2 * gas or mixture must be confirmed

STANDARD CYLINDER VALVE 25 D113 PACKED VALVE High pressure cylinder valve with RPV, packed needle stem design, for NO mixtures Can be connected with Ceodeux Meditec regulators KEY FEATURES Freedom from seizure when used with corrosive gases - gas does not come into contact with the valve operating mechanism Positive and effective operation - valve spindle is mechanically linked to the operating handwheel, which only requires low closing torque Long life - valve spindle and seat are replaceable Adjustable gland packing - in the unlikely event of a leakage occuring past the valve spindle, when opening the valve, rectification is readily achieved by retightening the gland packing nut Low internal volume - this is particularly beneficial, when using the valve for hygroscopic, corrosive or high purity gases, here inert gas purging may be necessary before opening or after closing the valve Left hand threaded counter screw to secure sealing mechanism even under excessive torque D113 M966 ~ 6 3 Ref catalog: MPR-EN-1115 ~ 123 ~ 103 ~ 7,5 ~ 39,5 ~ 32 SPECIFICATIONS Working pressure 200 bar/3000psig Flow coefficient Cv 0.3 Residual pressure 1 to 5 bar Temperature range Helium leak rate at pmax -40 C to +70 C 10-6 mbar l/sec 10-5 mbar l/sec 10-8 mbar l/sec Seat orifice size Body material 3,3 mm Stainless steel RPV seat material Viton PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety "NO mixture up to 1000 ppm 3/4" NGT OBS 200bar 200 ISO 5145 ISO None N 25E B CGA V1 CGA CGA S1.1 CGA

26 SPECIAL NITRIC OXIDE CYLINDER VALVE D413 TIED DIAPHRAGM High flow cylinder valves with RPV, tied diaphragm seal type, for NO mixtures Can be connected with Ceodeux Meditec regulators KEY FEATURES Reduced dead spaces and gas wetted volumes allow easy purging process Freedom of internal threads and springs insures minimum particulate generation Very low internal volume with minimum dead spaces. This is particularly beneficial, when using the valve for hygroscopic, corrosive, pyrophoric or high purity gases where inert gas purging is necessary before opening or after closing the valve Freedom from seizure where used with corrosive gases. Gas does not come into contact with the valve operating mechanism Positive and effective operation, valve lower spindle is mechanically linked to the upper spindle and the operating handwheel Backed up welded diaphragms provide a permanent and durable gas tight seal O-Rings in the gland and on spindle guarantee a secondary sealing Threaded vent hole Ref catalog: MPR-EN-1115 ~ 54 ~ 120 ~ 7,5 ~ 56 SPECIFICATIONS Working pressure 200 bar/3000 psig Flow coefficient Cv 0,35 Body material 316L Stainless steel Temperature range -40 C to +70 C Seat orifice size 4 mm Residual pressure 1 to 5 bar Helium leak rate at pmax 10-8 mbar l/sec Gas wetted materials PCTFE RPV seat material Viton PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety "NO mixture up to 1000 ppm 3/4" NGT OBS 200bar 200 ISO 5145 ISO None N 25E B CGA V1 CGA CGA S1.1 CGA

SPECIAL NITRIC OXIDE CYLINDER VALVE 27 M966 PIN INDEX CYLINDER VALVE High pressure brass cylinder valve for medical gases and oxygen, with yoke outlet connection (PIN INDEX System) O-ring-seal Can be connected with Ceodeux Meditec regulators KEY FEATURES Low operating torque MRI compatible Key-operated or handwheel operating system Safe, long, trouble-free life under all service conditions Testing according EN ISO 10297 and CGA U9 Standard OPTIONS Inlets: 17E 19E 19T LT T M18 US threads Natural brass Burst disc safety device Fusible metal safety device Other filter (lang) I.E: Alpinox Pin index Ref catalog: MPR-EN-1115 ~ 103 ~ 120 ~ 32 SPECIFICATIONS Working pressure Temperature range 232 bar -25 C to +70 C Seat orifice size Magnetic compatibility 2.5 mm yes Seat material PA 6.6 O-ring material EPDM Helium leak rate at pmax 10-3 mbar l/sec Key operated Handwheel material chrome plated plastic switch blade Body material Filter material Chrome plated brass brass sintered PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 ISO 407 ISO None N N 2 O N 2O M18X1,5 RCS CGA CGA CGA S1.1 CGA Various gases (*) VG * 25E B CO 2 CO 2 * gas or mixture must be confirmed

28 PIN INDEX VALVE M650 PIN INDEX RPV CYLINDER VALVE PIN INDEX valve for medical gases with active residual pressure function Can be connected with Ceodeux Meditec regulators KEY FEATURES High tensile brass (CZ115) Low operating torque MRI compatible Key-operated or handwheel operating system Design and tested acc. EN849, EN ISO407, EN ISO15996 and CGA V9 Residual pressure Manufacturing in clean room OPTIONS Inlets: 17E 19E 19T LT T M18 US threads Natural brass Burst disc safety device Fusible metal safety device Other filter (lang) I.E: Alpinox Pin index Ref catalog: MPR-EN-1115 SPECIFICATIONS Working pressure 232 bar Cv 0.08 O-ring material EPDM Temperature range Helium leak rate at pmax Seat orifice size -25 C to +70 C 10-3 mbar l/sec 2.5 mm Magnetic compatibility yes Key operated chrome plated handwheel material removable plastic switch blade Seat material PA 6.6 Body material Filter material chrome plated / natural brass brass sintered PRODUCT CONFIGURATOR Gas Inlet Connection Working Pressure Outlet connection HP Safety O 2 O 2 17E A 200bar 200 ISO 407 ISO None N N 2 O N 2O M18X1,5 RCS CGA CGA CGA S1.1 CGA Various gases (*) VG * 25E B CO 2 CO 2 * gas or mixture must be confirmed

29 NOTES

A FULL LINE OF GAS CONTROL SOLUTIONS COMPLETE SOLUTIONS FROM SOURCE TO PROCESS. ROTAREX is helping engineers worldwide to get better gas results: from ultra high purity production and medical care facilities to industrial and LPG applications, as well as alternative energy vehicles, fire suppression, diving, aerospace, cryogenics, laboratory, petro-chemical and welding. ROTAREX applies over 90 years of know-how and experience to custom design, develop and manufacture the high performance valves, regulators and fittings to suit your needs, all in one hand. Discover the difference ROTAREX can make in your world. CYLINDER VALVES EQUIPMENT FIRETEC AUTOMOTIVE LPG/SRG MEDITEC

ULTRA HIGH PURITY VALVES MEDICAL VALVES & EQUIPMENT INDUSTRIAL CYLINDER VALVES REFRIGERANT CYLINDER VALVES PRESSURE REGULATORS SUPPLY & SWITCH OVER BOARDS LINE VALVES FITTINGS & ADAPTORS FIXED INSTALLATION FIRE SYSTEMS OBJECT FIRE SUPPRESSION SYSTEMS AUTOMOTIVE VALVES & REGULATORS WATER CARBONATION LPG TANK VALVES & REGULATORS LPG CYLINDER VALVES & REGULATORS DIGITAL MEASUREMENT SYSTEMS PLASTIC INJECTION MOULDING AUSTRALIA / BRASIL / CHINA / FRANCE / INDIA / ITALY / JAPAN / LUXEMBOURG / MIDDLE EAST / RUSSIA / SINGAPORE / SPAIN / THAILAND / USA AUSTRALIA / BRASIL / CHINA / FRANCE / INDIA / ITALY / JAPAN / LUXEMBOURG / MIDDLE EAST / RUSSIA / SINGAPORE / SPAIN / THAILAND / USA

www.rotarex.com WORLDWIDE HEADQUARTERS ROTAREX S.A. 24, rue de Diekirch, L-7440 Lintgen Luxembourg Tel.: + 352 32 78 32-1 Fax: + 352 32 78 32-854 E-mail: info@rotarex.com REGIONAL / COUNTRY HEAD QUARTERS NORTH AMERICA EUROPE ASIA - PACIFIC MIDDLE EAST / AFRICA USA Rotarex North America 101 Bilby Road Building 2 Hackettstown, NJ 07840 USA Tel.: +1 724-696-4340 E-mail: northamerica@rotarex.com SOUTH AMERICA BRASIL Rotarex Brazil Ltda Cond. Ind. Portal da Anhanguera Estr. Municipal Gov. Mário Covas, S/N 13279-411 Bairro Macuco -Valinhos São Paulo Brazil Tel.: +55 19 3518 0800 Fax: +55 19 3869-1503 E-mail: brasil@rotarex.com EUROPEAN HEADQUARTERS 24, rue de Diekirch, L-7440 Lintgen, Luxembourg Tel.: +352 32 78 32-1 E-mail: salesequipment@rotarex.com ITALY Rotarex Italia S.r.l. 46 Via Giacomo Matteotti I-25080, Ciliverghe di Mazzano (BS) Italy Tel.: +39 030 212 05 50 Fax: +39 030 212 23 62 E-mail: italia@rotarex.com SPAIN Rotarex Spain Edificio Foro de Somosaguas Ctra. Carabanchel a Pozuelo, km. 5,6 Urb. Pinar de Somosaguas, 89 bis Planta 1, Oficina 20 28223 Pozuelo de Alarcón Spain Tel.: +34 91 007 47 64 E-mail: spain@rotarex.com RUSSIA Rotarex Rus Tverskaya street, 20/1 bldg. 1 of 506 125009, Moscow Russia Tel.: +7 985 125 7776 Skype: rotarexrus E-mail: russia@rotarex.com ASIA-PACIFIC HEADQUARTERS Rotarex Fareast Pte Ltd 10 Ubi Crescent Ubi Techpark, Lobby C, #06-55 408564 Singapore Tel.: +65 64 72 37 27 Fax: +65 64 72 45 28 E-mail: fareast@rotarex.com CHINA Rotarex Star 60 Yuan Zhong Road Shanghai Nanhui Industrial Zone 201300, Shanghai China Tel.: +86-21 5800 4000 Fax: +86-21 5800 3226 E-mail: china@rotarex.com JAPAN Rotarex Japan Ltd 6F, Yawaragi Bldg., 1-27-11 Taito Taito-ku, Tokyo 110-0016 JAPAN Tel.: +81 3 5817 8108 Mob.: +81 80 3755 2539 Fax: +81 3 5817 8168 E-mail: japan@rotarex.com INDIA Rotarex ENGG. PVT. LTD. C-105, Mahindra Apartments Vikaspuri, New Delhi 110018 mob.: +91 998 740 1972 E-mail: india@rotarex.com THAILAND Rotarex (Thailand) Co Ltd. 200, Moo 4 Jasmine International Tower, 6 Floor 607E Chaengwattana road, Pakkret, Pakkret, Nonthaburi 11120 Thailand Tel.: +66 2 100 3602 Fax: +66 2 100 3602 E-mail: thailand@rotarex.com MIDDLE EAST Rotarex Middle East Jebel Ali Free Zone - Lob 17, Office 415 P.O. Box 261952 Dubai, U.A.E. Tel.: +971 (0) 4 887 6701 Fax: +971 (0) 4 887 6702 E-mail: middle-east@rotarex.com POLAND Rotarex Polska 5 Gröbli PL 49-300 Brzeg, Poland Tel.: +48 77 416 40 16 Fax: +48 77 416 20 99 E-mail: polska@rotarex.com 2012 - ROTAREX S.A. CEODEUX MEDITEC - CEODEUX S.A. MCV-EN-1116