ICC Uniform Rules for. Collections

Similar documents
AS Australian Standard. Guide to swimming pool safety. This is a free 7 page sample. Access the full version online.

Australian Standard. Manual of uniform traffic control devices. Part 3: Traffic control for works on roads AS AS 1742.

Australian/New Zealand Standard

27 February 28 February 2012 or 12 March - 13 March 2012 ICC Headquarters 38, Cours Albert 1er, Paris - France

Amendments to the International Convention on Maritime Search and Rescue of 27 April 1979

HELMETS. Climbing and Mountaineering Equipment. Foreword

BRITISH STANDARD BS 341-4: Transportable gas container valves. Part 4: Pressure relief devices ICS

ICE ANCHORS. Climbing and Mountaineering Equipment. Foreword

Australian/New Zealand Standard

Australian/New Zealand Standard

ROCK ANCHORS. Climbing and Mountaineering Equipment. Foreword

AS/NZS :2017. Retroreflective materials and devices for road traffic control purposes AS/NZS :2017. Part 1: Retroreflective sheeting

INTERNATIONAL STANDARD

ADVANCED DAM ENGINEERING FOR DESIGN, CONSTRUCTION, AND REHABILITATION

CRASH PADS. Climbing and Mountaineering Equipment. Foreword

Australian Standard. Swimming pool safety. Part 3: Water recirculation systems AS AS

CONNECTORS / KARABINERS. Climbing and Mountaineering Equipment. Foreword

AS SSA AS SSA Australian Standard. Australian Fish Names Standard. This is a free 8 page sample. Access the full version online.

SINGAPORE POOLS (PRIVATE) LIMITED 210 MIDDLE ROAD, #01-01 SINGAPORE POOLS BUILDING, SINGAPORE

All TSOs of the Nordic Capacity Calculation Region Proposal for fallback procedures in accordance with Article 44 of Commission Regulation (EU)

ISO 9244 INTERNATIONAL STANDARD. Earth-moving machinery Machine safety labels General principles

ICC REGULATIONS ON SANCTIONING OF EVENTS

ICC Events. International Commercial Arbitration. Study of a mock case under the ICC Rules of Arbitration

ISO INTERNATIONAL STANDARD. Gas cylinders Fitting of valves to gas cylinders. Bouteilles à gaz Montage des robinets sur les bouteilles à gaz

AS/NZS :2010. Retroreflective materials and devices for road traffic control purposes AS/NZS :2010

FIBRE OPTICS. Theory and Practice

Amendments to the International Convention on maritime search and rescue of 27 April Concluded London, 18 May 1998.

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Personal fall-arrest systems Part 1: Full-body harnesses

ISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods

Australian/New Zealand Standard

Physical Structure of Olympic Athletes. Part I: The Montreal Olympic Games Anthropological Project. Medicine and Sport. Vol. 16.

Australian/New Zealand Standard

QUESTIONS AND ANSWERS ON AUDIT PARTNER ROTATION REQUIREMENTS IN MALAYSIA

Australian/New Zealand Standard

AS AS Australian Standard. Spa pools. Part 2: Private spas. This is a free 6 page sample. Access the full version online.

Three Rivers Golf Members

ISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods

ISO INTERNATIONAL STANDARD

Australian/New Zealand Standard

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 5: Dive supervisor. Australian/New Zealand Standard

ISO 2503 INTERNATIONAL STANDARD

Racing Rules of Sailing

Agenda Item 6-ATM Coordination (Airspace restructuring, AIS and SAR agreements)

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Welding consumables Gases and gas mixtures for fusion welding and allied processes

Forty-first Session of the Executive Council UNESCO, Paris, 24 June 1 July 2008

MSC United, Incorporated Operating Guidelines and Procedures

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales

Thank you for downloading. Help Guide For The Lay Back Horse Racing Backing Spreadsheet.

Membership Guidelines

SAILING INSTRUCTIONS

Australian/New Zealand Standard

ISO INTERNATIONAL STANDARD. Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements

Venting Atmospheric and Low-pressure Storage Tanks API STANDARD 2000 SEVENTH EDITION, MARCH 2014

Australian/New Zealand Standard

Monocacy Youth Basketball Association Organization Documents and Bylaws Effective September 1, 2017

SOCCER ALIVE ABOUT THE AUTHOR ABOUT THE BOOK ISBN:

ISO INTERNATIONAL STANDARD

ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales

ISO INTERNATIONAL STANDARD. Breathing system filters for anaesthetic and respiratory use Part 2: Non-filtration aspects

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor

INTERNATIONAL STANDARD

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 2: Surface supplied diving to 30 m

ISO INTERNATIONAL STANDARD

POOL & SPA/HOT TUB APSP STANDARDS AS REFERENCED IN THE 2009 INTERNATIONAL CODES

Laws of the Game 16/17 Introduction

Roads and public rights of way

USRC TIGERS RUGBY FOOTBALL CLUB Bye-Laws (Revision 1, Adopted June 2016)

Physical Structure of Olympic Athletes Part II : Kinanthropometry of Olympic Athletes

Allocation of Previously Donated Funds - The First Tee of the Virginia Blue Ridge - $20,491

ISO INTERNATIONAL STANDARD. Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis

BCGA GUIDANCE NOTE 17

Gear hobs Accuracy requirements

ISO INTERNATIONAL STANDARD. Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General

IFC 2015 CODE AND COMMENTARY. The complete IFC with commentary after each section VOLUME 2

PANEL DECISION. newcastlepaintball.com.au. Panel: Andrew Robertson. Hunter Valley Paintball Pty Ltd. Delta Force Properties Pty Ltd

Southwest Power Pool REGIONAL STATE COMMITTEE BYLAWS

ISO INTERNATIONAL STANDARD. Gas cylinders Specifications and testing of LPG cylinder valves Self-closing

Working Draft: Gaming Revenue Recognition Implementation Issue. Financial Reporting Center Revenue Recognition

CANADIAN BROADCAST STANDARDS COUNCIL NATIONAL SPECIALTY SERVICES PANEL. TSN re Ultimate Fighting Challenge. (CBSC Decision 02/ )

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

CEFR A2 STEP TO. Elementary Student Book. Revised & Updated. Offi cial preparation material for Anglia ESOL International Examinations.

Developing and supporting a world class sporting system. Summary of progress

ISO 5367 INTERNATIONAL STANDARD. Breathing tubes intended for use with anaesthetic apparatus and ventilators

FIELD GUIDE COMMERCIAL MARINE RESOURCES OF THE GULF OF GUINEA TO THE FAO SPECIES IDENTIFICATION SHEETS FOR FISHERY PURPOSES

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

International Military Sports Council Conseil International du Sport Militaire Consejo Internacional del Deporte Militar

Decision of the Dispute Resolution Chamber

49er, 49erFX and Nacra 17 Junior World Championships NOTICE OF RACE

NUNEATON WORLD WAR ONE ROLL OF HONOUR

INSPECTION, TESTING AND CERTIFICATION OF GASFITTING WORK DONE UNDER SUPERVISION

Mountaineering and Climbing Equipment. CRASH PADS Determination of the critical fall height. Foreword

Cooroy Golf Club Inc. (ABN ) of 28 Myall Street, Cooroy Q4563

NPGA White Paper. OSHA Hazard Communication Standard

TECHNICAL SPECIFICATION

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

IN THE MATTER OF PROCEEDINGS BROUGHT UNDER THE ICC ANTI-CORRUPTION CODE. Between: THE INTERNATIONAL CRICKET COUNCIL. and MR IRFAN AHMED DECISION

Transcription:

ICC Uniform Rules for Collections 1995 Revision in force as of January 1, 1996

The ICC Uniform Rules for Collections were first published by the ICC in 1956. Revised versions were issued in 1967 and 1978. This present revision was adopted by the Council of the ICC in June 1995, for issue as ICC Publication N 522. This English language edition gives the official text of the 1994 Revision. Translations in other languages may be available from ICC National Committees. First published in July 1995 by ICC PUBLISHING S.A. (Paris) and ICC PUBLISHING, INC. (New York) Copyright 1995 International Chamber of Commerce All rights reserved. No part of this work may be reproduced or copied in any form or by any means graphic, electronic or mechanical, including photocopying, recording, taping or information retrieval systems without the written permission of ICC Publishing S.A, or ICC Publishing, Inc. for the USA. Designed by: Rebus (cover), ICC Publishing (interior) France Printed by: Boekhoven Bosch Netherlands ICC Publication N 522 ISBN 92-842-1184-0

ICC UNIFORM RULES FOR COLLECTIONS 3

FOREWORD The raison d être for the existence of the ICC is to facilitate trade among the world's trading countries, within which one of our core tasks is an ongoing review of international trade practices in various fields. Accordingly, the ICC undertook a review of the Uniform Rules for Collections in March 1993, and these revised rules, which represent the culmination of the revision work, were drafted by international experts drawn from the private sector who have worked in ICC Commissions over the last two years. The review covered changes in collection procedures, technology, and laws and regulations, both national and international. From the perspective of the ICC, a significant achievement of the revision is that National Committees and experts from all parts of the world took an active part in the discussions and made a positive contribution to the work. These revised rules and their unanimous adoption by members of the ICC Banking Commission, which has a wide international representation, are a source of pride to us all, and the extensive and fruitful international consultation which preceded this work is the hallmark of the ICC. [INSERT SIGNATURE] Jean-Charles Rouher Secretary General of the ICC 4 ICC UNIFORM RULES FOR COLLECTIONS

PREFACE In keeping with the ICC policy of staying abreast of changes in international commerce, the ICC Banking Commission initiated a revision of Uniform Rules for Collections in March 1993, and these revised rules represent the work of the ICC Working Party entrusted with the revision project since that time. The revised rules, which come into effect on 1 January, 1996, replace the Uniform Rules for Collections, ICC publication N 322, in force since January 1979. There is a separate new ICC publication, N 550, containing a comprehensive commentary covering relevant discussions that took place during the revision process. The commentary, which is intended to give guidance on practical issues and to provide an insight into the thinking of the Working Party, is not meant to replace the rules in any way. The objectives of the Working Party were to review changes in international collection procedures, technology, and laws and regulations both national and international since 1979. Similarly, issues that continue to cause problems to practitioners were to be examined to see the extent to which the revision could assist in their resolution. Additionally, the text and language of UCP 500 were to be examined in order to achieve a degree of harmonisation within the revision. In the course of its work over the last two years, the Working Party examined approximately 2,500 comments from over 30 countries. In certain cases, such as in considering Electronic Data Interchange, the Working Party felt that uncertainty on legal issues precluded any attempt to draft rules to cover this aspect at the present time. Similarly, while the importance of local practices and requirements in certain countries were fully appreciated by the Working Party, it was considered unwise to draft rules to cover such practices and requirements, as they might not be acceptable to the rest of the international ICC UNIFORM RULES FOR COLLECTIONS 5

community. In considering an extensive range of views and comments, the Working Party had considerable difficulty in evaluating some of them, and, where conflicting views were expressed, the Working Party adopted the point of view closest to, and most consistent with, accepted international practice. The Working Party, in achieving its objectives, did not seek to make change for the sake of change and often left the wording of the old rules substantially unchanged. Changes were made only in response to altered practices and requirements and to resolve practical difficulties encountered by practitioners. The Working Party would like to express its sincere thanks to ICC National Committees and the members of the Banking Commission for their helpful and constructive comments and their continuous participation in the revision. I list below in alphabetical order the members of the Working Party: JUNEID M. BAJUNEID CARLO DI NINNI STEFAN DRASZCZYK BERND HOFFMANN ROB F. LANTING Assistant Manager Trade Services, the National Commercial Bank, Jeddah Documentary Credit Department, Associazione Bancaria Italiana, Rome Former Head of Division, International Chamber of Commerce, Paris Direktor, Trinkaus & Burkhardt KGaA, Düsseldorf Senior Manager, Documentary Trade Department, ING Bank, Amsterdam 6 ICC UNIFORM RULES FOR COLLECTIONS

PETER OSTWALD PAUL C. RUSSO SIA CHEE-HONG Vice President Trade Finance Department, Nordbanken, Gothenburg Vice President, United States Council on International Banking, New York Vice President Bills and Remittances, Overseas Union Bank Ltd, Singapore and CARLOS VELEZ-RODRIGUEZ Head of Division, International Chamber of Commerce, Paris The undersigned had the pleasure of chairing the Working Party. As Chairman, I extend my deep appreciation to the ICC National Committees, the Banking Commission and the individual members of the Working Party. It was through the generous contribution of their time and the sharing of their knowledge that this revision was accomplished so successfully. I also wish to convey the gratitude of the ICC for their selfless commitment to this work. [INSERT SIGNATURE] LAKSHMAN, Y. WICKREMERATNE ACIB Chairman, ICC Working Party on Collections Former Manager Services, The Hongkong and Shanghai Banking Corporation Ltd, London Chairman, British Bankers Association Trade Facilitation Group, 1992-1994 ICC UNIFORM RULES FOR COLLECTIONS 7

CONTENTS Please note that the title or classification in the heading of each Article is for reference as to intent and purpose. It is not to be construed as being other than solely for benefit or guidance and there should be no legal imputation. Page Foreword 3 Preface 4 Article A. General Provisions and Definitions 9 Application of URC 522 1 9 Definition of Collection 2 9 Parties to a Collection 3 10 B. Form and Structure of Collections 11 Collection Instruction 4 11 C. Form of Presentation 13 Presentation 5 13 Sight/Acceptance 6 14 Release of Commercial Documents Documents Against Acceptance (D/A) vs Documents Against Payment (D/P) 7 15 Creation of Documents 8 16 D. Liabilities and Responsibilities 16 Good Faith and Reasonable Care 9 16 Documents vs.goods/services/performances 10 16 Disclaimer for Acts of an Instructed Party 11 18 Disclaimer on Documents Received 12 18 Disclaimer on Effectiveness of Documents 13 19 Disclaimer on Delays, Loss in Transit and Translation 14 19 Force Majeure 15 20 8 ICC UNIFORM RULES FOR COLLECTIONS

E. Payment 20 Payment Without Delay 16 20 Payment in Local Currency 17 20 Payment in Foreign Currency 18 21 Partial Payments 19 21 F. Interest, Charges and Expenses 22 Interest 20 22 Charges and Expenses 21 22 G. Other Provisions 24 Acceptance 22 24 Promissory Notes and other Instruments 23 24 Protest 24 24 Case-of-Need 25 25 Advices 26 25 Acknowledgements 27 The ICC at a glance 30 Selected ICC publications 31 ICC UNIFORM RULES FOR COLLECTIONS 9