NE BERMAD Irrigation ig Performance Valves ater Control Solutions
100 Series Yflow ig Performance Plastic ydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction uses glass-filled Nylon material to meet roug service conditions. Positive guided valve plug provides accurate motion and smoot regulation. Avoids cattering and slamming closed. Ultra-ig flow capacity wit minimal pressure loss. Designed for service on a wide range of pressure and flow conditions, from dripping to maximum flow. Simple design wit few parts guarantees easy in-line inspection and service. Versatile end connections allow mix of different sizes and connection types. Female tread, Flanged or PVC Slip-on Glue or Grooved adapter (as add-on option). Articulated flange connections isolate te valve from line bending and pressure stresses 1
Basic valve IR-100 Yflow Te BERMAD IR-100 Yflow basic model diapragm actuated, ydraulically operated valve is at te leading edge of control valve design. It combines simple and reliable construction wit superior performance, wile at te same time being virtually free of te typical limitations associated wit standard control valves. BERMAD s automatic water control valves are designed for vertical or orizontal installation and are available in sizes of 1 1 /2, 2, 2, 2 1 /2, 3, 3, 4 & 6 DN: 40, 50, 50, 65, 80, 80, 100 & 150. Te IR-100 Yflow model, made from industrial durable glass-filled nylon, is engineered to meet roug service conditions wit ig cemical and cavitation resistance. Te Yflow Y valve body design includes a full bore seat wit unobstructed flow pat, free of any in-line ribs, supporting cage, or safts. Its unitized Flexible Super Travel (FST) diapragm and guided plug provide a significantly look troug passage from end to end resulting in ultra-ig flow capacity wit minimal pressure loss. Te combination of a long travel guided valve plug, periperally supported diapragm, and replaceable valve seal provides: No cattering or slamming closed Accurate and stable regulation wit smoot motion ow operating pressure requirements No diapragm erosion and distortion Diapragm and spring fully meet te valve s operating pressure range requirements No UV and frozen effect Cemical resistant Designed for service under a wide range of pressure and flow conditions, from dripping to maximum flow, te IR-100 Yflow excels at being a userfriendly control valve: Simple design wit few parts guarantees easy in-line inspection and service. Adaptable on-site to a wide range of end connection types and sizes. Articulated flange connections isolate te valve from pipeline bending and pressure stresses. ook-troug Design Straigt troug flow results in ultra-ig flow capacity wit minimum pressure loss 2
Principle of Operation On-Off Modes 3-ay Control ine pressure applied to te control camber of te valve creates a ydraulic force tat moves te valve to te closed position and provides drip tigt sealing. Discarging pressure from te control camber to te atmospere causes te line pressure under te plug to open te valve. 2-ay Internal Control ine pressure enters te control camber troug te internal restriction. Te closed solenoid causes pressure to accumulate in te control camber, tereby sutting te valve. Opening te Solenoid releases more flow from te control camber tan te restriction can allow in. Tis causes pressure in te control camber to drop, allowing te valve to open. 2-ay Modulating Modes (Pressure Reducing Pilot) Modulating to Close ine pressure enters te control camber troug te internal restriction. Te pilot controls outflow from te control camber. Trottling wen it senses a pressure rise, it causes pressure to accumulate in te control camber, tereby forcing te valve to modulate closed. Modulating to Open Te pilot modulates open wen it senses a pressure drop, releasing more flow from te control camber tan te restriction can allow in. Tis causes te accumulated pressure in te control camber to drop and te valve modulates open. Zero Flow Position en demand drops to zero, downstream pressure begins to rise as te flow enters a closed line. Te pilot closes, initiating te valve s irreversible closing process, eventually causing it to seal drip tigt. 3
Principle of Operation 3-ay Control Modes (Pressure Reducing) Fully Open Position en upstream pressure drops, te pilot blocks te supply pressure port and opens te drain port, venting te control camber to te atmospere. Tis fully opens te valve, minimizing ead loss. Modulating to Close Te pilot switces upon pressure rise, blocking te drain port and opening te supply pressure port. Tis pressurizes te control camber, forcing te valve to modulate closed. ocked Position en sensed pressure is equal to setting, te pilot blocks bot te drain and te supply pressure ports. Tis locks te pressure in te control camber, freezing valve opening in its last position until conditions cange. 3/2-ay Control Modes (Pressure Reducing) Modulating to Open en pressure drops, te pilot restricts te flow pat troug te supply pressure port, and widens te flow pat troug te drain port. Tis releases more flow from te control camber tan can be allowed in, tereby causing te valve to modulate open. Modulating to Close Upon pressure rise, te pilot widens te flow pat troug te supply pressure port, and restricts te flow pat troug te drain port. Tis allows more flow into te control camber tan can be released, tereby pressurizing it and forcing te valve to modulate closed. Stable Conditions As long as flow and pressure conditions are constant, te pilot freezes te control camber inlet and outlet flow ratio. Tis keeps te valve opening rate constant, allowing te valve to react on-line to any anticipated canges in supply and/or demand conditions. 4
Product Features [1] Cover Ring Te cover ring fastens valve cover to body, stiffening and strengtening te valve body, enabling simple maintenance. A cover ring key is available. [2] Pilot Adaptor Te pilot adaptor allows us to connect te mini-pilot valve or te Galit ydraulic relay to te valve body. [3] Valve Cover Te cover s strong construction meets roug service conditions. Optional cover types (3 ; DN80 and smaller valves) are capable of accepting a Flow Stem, a Flow Stem + Position Indicator, and a 2-ay Solenoid (2-N1 Electric Type). [4] Auxiliary Closing Spring One single ig grade stainless steel spring provides a wide operation range, ensuring low opening pressure and secured closing. [5] Plug Assembly Te unitized Flexible Super Travel (FST) plug assembly combines a long travel guided valve plug, periperally supported diapragm, and replaceable diapragm and valve seal. Te diapragm fully meets te valve s operating pressure range requirements. [5.1] Diapragm older [5.2] Diapragm [5.3] Plug [5.4] Plug Seal [6] Yflow Y Valve Body Glass-filled nylon construction meets roug service conditions wit ig cemical and cavitation resistance. End-to-end look-troug design and full bore seat wit unobstructed flow pat, free of any in-line ribs, supporting cage, or safts, enables ultra-ig flow capacity wit minimal pressure loss. [7] End Connections Adaptable on-site to a wide range of end connection types and sizes: [7.1] Flanges: Plastic or metal Corona wit elongated slots enable meeting diverse flange standards ISO, ANSI and JIS. [7.2] Flange adaptor external tread [7.3] Internal treads [8] Flange Adapter Articulated flange connections isolate te valve from line bending and pressure stresses. [9] Valve egs Stabilize te valve and serve also as mounting brackets. 5
Configuration Options Valve Configurations Y Pattern Angle Pattern T Pattern Dual T Pattern Available in all sizes Available in 3 & 3 DN: 80 & 80 Available in 3 DN: 80 Available in 3 DN: 80 End Connection Options 6 ; DN 150 Boxer - Flanged 6 ; DN 150 Boxer - Grooved (Vic) BSP.T; NPT Female Tread 1 1 /2, 2 & 2 ; DN: 40, 50 & 50 BSP.F Male Tread, (for PVC Adapters) 2, 2 1 /2 ; DN: 50 & 65 BSP.T; NPT Female Tread 3 & 3 ; DN: 80 & 80 Union PVC Adaptor 2, 2 1 /2 ; DN: 50 & 65 Plastic Flange 3 & 4 ; DN: 80, 80 & 100 Metal Flange 3 ; 3 & 4 ; DN: 80, 80 & 100 PVC Adaptor 1 1 /2, 2 & 3 DN: 40, 50 & 80 6
Main Models Basic ydraulic Valve, Model 105-Z Model 105-Z, is a ydraulically self-operated, diapragm-actuated valve, wic uses te ydraulic force of te existing line pressure, or any external ydraulic command (water or air), to open and close. Recommended for all On\Off applications, Model 105-Z is particularly suitable for agricultural irrigation eads, and filter stations. Electric Valve, Model 110-2-N Model 110-2-N, is a ydraulically self-operated, diapragm-actuated, solenoidcontrolled valve. Te valve opens fully and closes drip-tigt in response to an electric signal, wic causes te solenoid to open or close te valve s internal ydraulic loop. It operates wit a variety of solenoid voltage ranges: 24VAC, 24VDC or 9VDC, 12VDC-latc. Recommended for all electric On\Off applications, Model 110-2-N is particularly suitable for turf irrigation eads and commercial green ouse irrigation. Te Model 110-2-N also features a manual override. Pressure Reducing Valve, Model 120-bZ Model 120-bZ, is a ydraulically self-operated, diapragm-actuated control valve, wic uses te ydraulic force of te line pressure to reduce iger upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. Te pilot continuously senses te downstream valve pressure and controls te valve s opening and closing rate accordingly, by increasing or decreasing te flow from te valve control camber to downstream. Te quick and accurate response of Model 120-bZ prevents line fill-up surges and pressure peaks, wic can be damaging, especially to tin wall irrigation scemes. Te unique Yflow design makes te Model 120-bZ te best and most costeffective solution for agricultural irrigation eads in large and medium scale blocks, were flow is ig and upstream pressure is liable to drop very low. Electric Pressure Reducing Valve, Model 120-55-bZ Model 120-55-bZ, is a ydraulically self-operated, diapragm-actuated control valve wic uses te ydraulic force of te line pressure to reduce iger upstream pressure to lower constant downstream pressure, regardless of fluctuating demand or varying upstream pressure. Te added solenoid enables te opening and sut-off of te valve by an irrigation controller. Pressure reducing performance of te Model 120-55-bZ is similar to tat of te Model 120-bZ, tus providing protection for te irrigation equipment wenever te valve opens and trougout te irrigation cycle. Model 120-55-bZ operates wit a variety of solenoid voltage ranges: 24VAC, 24VDC or 9VDC, 12VDC-latc. Flow Stems on all DN: 40, 50, 50, 65, 80 and 80 models are available upon request 7
Tecnical Data Flow Cart - Metric 100 Series, Control Valves Y & Angle Patterns 1.0 Pressure oss - bar 0.1 1.5, 2 3 A 2, 2.5 3 6 3, 4 3 A 0.01 1 10 Flow Rate (m 3 /) 100 1,000 100 Series, Control Valves 3 T & Dual Patterns 1.0 Pressure oss - bar 0.1 D T DD TT 0.01 1 10 100 1,000 Flow Rate (m 3 /) Flow Properties Sizes DN 40 50 50 65 80 80 80 80 80 80 80 80 100 150 Pattern Y Y Y Y Y A T TT D DD Y A Y Y One side Two sides One side Two sides KV 50 50 100 100 100 85 95 130 90 200 200 190 200 400 Tecnical Specifications Available Patterns & Sizes: DN: 40, 50, 50, 65, 80, 80, 100 &150 Available End Connections: Treaded: Female BSP-T/NPT DN: 40, 50, 50, 80 & 80 Male BSP-F DN: 50, 65 Flanged: DN: 80, 80, 100 & 150 Plastic or metal Corona wit elongated slots enable meeting diverse flange standards ISO PN10, ANSI 125, JIS 10K Pressure Rating: 10 bar Operating Pressure Range: 0.5-10 bar Temperature Range: ater up to 80 C Standard Materials: Body, Cover and Plug: Glass-Filled Nylon Diapragm: NBR [Buna N], Nylon Fabric Reinforced Seals: NBR [Buna N] Spring: Stainless Steel Cover bolts DN: 40, 50, 50, 65 & 80 8
Tecnical Data Dimensions & eigts - Metric NE CCDV = Control Camber Displacement Volume 1 Sizes DN 40 50 50 50 65 80 Pattern Y Y Y Y Y Y Y Y Rc 1 Ends /2 Rc 2 G 2 (BSP.F) Rc 2 (BSP.T) Rc 2 (BSP.T) G 2 (BSP.T) /2 (BSP.F) Universal Flanges (BSP.T) Connections 1 1 /2" NPT Male 2" NPT 2" NPT Male 3" NPT Metal Plastic (mm) 200 200 200 230 230 298 308 308 (mm) 156 156 156 170 170 180 240 240 (mm) 40 40 40 40 40 50 100 100 (mm) 97 97 97 135 135 190 100 100 CCDV (IT) 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 eigt (Kg) 0.8 0.8 0.8 1.35 1.4 1.6 4.4 2.5 1 (F) (T) (T) (F) (T) (F) (F) (T) (T) (F) CCDV = Control Camber Displacement Volume (T) (F) (F) Sizes DN 80 100 150 150 Pattern Y Y Y Y Y Y "Boxer" Y "Boxer" Rc 3 Universal Universal Universal Grooved endes Ends (BSP.T) Flanges Flanges Flanges Connections 3" NPT Metal Plastic Metal Plastic 150 (Vic) 150 Plastic (mm) 298 310 310 350 350 480 480 (mm) 240 280 280 294 290 195 285 (mm) 60 100 100 112 112 100 145 (mm) 190 100 100 115 115 385 385 CCDV (IT) 0.7 0.7 0.7 0.7 0.7 2x0.7 2x0.7 eigt (Kg) 3 5.9 4 7.6 4.9 8.8 12.8 (T) *Reinforced Plastic Flanges (T) (F) (T) (F) (F) (G) (G) (F) NE NE 1 1 1 Sizes DN 80 80 80 80 80 80 Pattern Angle Angle Angle "orns" T "orns" DUA "orns" DUA Ends Rc 3 (BSP.T) Rc 3 (BSP.T) Rc 3 (BSP.T) Rc 3 (BSP.T) Rc 3 (BSP.T) Rc 3 (BSP.T) Connections 3" NPT 3" NPT 3" NPT 3" NPT 3" NPT 3" NPT (mm) 235 187 220 325 400 400 (mm) 290 235 235 235 270 270 (mm) 145 117 117 117 115 115 (mm) 170 135 135 135 135 135 CCDV (IT) 0.7 0.2 0.2 0.2 2x0.2 2x0.2 eigt (Kg) 2.8 1.6 1.7 2.1 3.2 3.2 1 1 1 9
Typical Applications Irrigation Control ead - Filtration System Pressure Reducing & Sustaining Separating Valves and quick Pressure Relief Valves Irrigation Control ead - Filtration System Pressure Sustaining Separating Valves Sub-Main Control - Distribution System Pressure Reducing Valves wit Relief Override Sub-Main Control - Distribution System Normally Closed Pressure Reducing & Sustaining Main Valve and four Solenoid Controlled Valves 10
BERMAD orldwide it representation on every continent and across some 86 countries, BERMAD is an undisputed world leader in control valves, maintaining broad training and parts distribution networks all over te globe. erever your location, BERMAD is tere. BERMAD International ead Offices: BERMAD Australia BERMAD Brazil BERMAD Cile BERMAD Cina BERMAD Colombia BERMAD Italy BERMAD Mexico BERMAD Peru BERMAD UK BERMAD USA Europe Asia Australia Africa America info@bermad.com www.bermad.com BERMAD ater Control Solutions BERMAD aterworks BERMAD Fire Protection BERMAD Petroleum BERMAD Irrigation BERMAD andscape info@bermad.com www.bermad.com Te information erein is subject to cange witout notice. BERMAD sall not be eld liable for any errors. All rigts reserved. Copyrigt by BERMAD PC1AE09 09