Smart tips! These are the important things with stairs and bridging steps! Smart tip 1 Large stepping and standing surfaces: Safe, comfortable and fatigue-free working also with tools and for a longer period of time Smart tip 2 Easy installation: Delivery in pre-mounted component groups including mounting instructions Smart tip 3 Surface materials: Non-slip versions for safe standing; different materials to order - suitable for individual use 45 / 60 / x Smart tip 4 angle: For all sizes standard angle of inclination of 45 deg. and 60 deg. as well as special angles of inclination to order 46
Stairs with landings, wheeled platform stairs, bridging steps General information Light-metal industrial stairs with standard inclinations of 45 deg. and 60 deg. Special inclinations to order. These stairs are produced in keeping with the German Accident Prevention Regulations BVG D36/GUV/V D36, BGI 637, German standards DIN 14183, DIN 24530, DIN 31003 and European standards EN ISO 14122. Light-metal industrial stairs shall not be used for domestic purposes in keeping with German standard DIN 1055. Notes on European standard EN ISO 14122 For safety reasons, stairs with an inclination of 45 deg. should be given preference. It is only if and when the local conditions require that an inclination of 60 deg. should be chosen. Permissible load: 1.5 kn/sqm. For 45 deg. stairs and a step width of, a centre support is required as from a vertical height of 3.75 m; in case of step width of 800 or 1,000 a centre support is required as from a vertical height of 3.33 m. These centre supports may be constructed as brackets or supporting frames; please observe our delivery options mentioned below. Characteristic construction features Side-rails are made of sturdy aluminium profile; upper end with support angle; lower end with plastic shoes; foot angles to order. The railings are made of aluminium tubes, diam. 40, with screwed connecting elements; height of railings: 1,100 ; plug-in railings to order at a surcharge; with web members or sheeting to order. Non-slip step covers screwed to the side-rails. Standard step cover made of grooved aluminium or galvanised perforated steel sheet; at a surcharge, deeply grooved aluminium, perforated aluminium sheet, aluminium grating, galvanised steel grating to order. The manufacturer supplies pre-mounted component groups; the railings are always loosely enclosed; including mounting instructions and declaration of the manufacturer. Surcharge per step Deeply grooved aluminium Aluminium grating Step width Step width Step width 800 Step width 800 Step width 1000 Step width 1000 Perforated aluminium sheet Galvanised steel grating Step width Step width Step width 800 Step width 800 Step width 1000 Step width 1000 Accessories Triangular aluminium bracket, suitable for step width Order No. 300100 Triangular aluminium bracket, suitable for step width 800 Order No. 300101 Triangular aluminium bracket, suitable for step width 1000 Order No. 300102 Aluminium support frame for 45 deg. steps Order No. 300106 Face-side railing, suitable for step width Order No. 300103 Face-side railing, suitable for step width 800 Order No. 300104 Face-side railing, suitable for step width 1000 Order No. 300105 Overview of step covers Width () 200 240 325 200 200 225 240 235 240 270 305 x x x Deeply grooved aluminium Perforated light-metal sheet x x Light-metal grating x Perforated steel meet x x Steel grating x x x x 47
With system railings, diam. 40 Aluminium stairs with light-metal or steel steps, 45 deg. Width of the steps: 800 1,000 ; the stairs come with a handrail. In keeping with European standard EN ISO 14122, a second handrail is required for an ascent height of more than 500 and a lateral gap next to the stair check of more than 200, which can be delivered at a surcharge. Special dimensions to order, steps made of lightmetal grating, perforated light-metal sheet or steel grating see general information. Top of stairs with support angle; bottom end with non-slip ladder shoes (brackets for floor attachment to order). In keeping with German standard DIN 1055, these stairs cannot be used for domestic purposes. Intermediate sizes to order at the price of the next higher number of stairs. Stairs 45 deg. Fig. Order No. 300246 with second handrail order No. 300306 Number of steps 4 5 6 7 8 10 11 12 13 14 15 16 17 18 45 Width of the steps 800 1000 Second handrail at an extra charge depth 240 sheet depth 225 depth 240 sheet depth 225 depth 240 sheet depth 225 m 0.83 1.04 1.25 1.46 1.67 1.87 2.08 2.2 2.50 2.70 2.1 3.12 3.33 3.54 3.75 Base area m 0.8 1.18 1.3 1.60 1.81 2.01 2.23 2.43 2.64 2.84 3.06 3.26 3.50 3.68 3.0 Order No. 300244 300245 300246 300247 300248 30024 300250 300251 300252 300253 300254 300255 300256 300257 300258 Order No. 310244 310245 310246 310247 310248 31024 310250 310251 310252 310253 310254 310255 310256 310257 310258 Order No. 300264 300265 300266 300267 300268 30026 300270 300271 300272 300273 300274 300275 300276 300277 300278 Order No. 310264 310265 310266 310267 310268 31026 310270 310271 310272 310273 310274 310275 310276 310277 310278 Order No. 300344 300345 300346 300347 300348 30034 300350 300351 300352 300353 300354 300355 300356 300357 300358 Order No. 310344 310345 310346 310347 310348 31034 310350 310351 310352 310353 310354 310355 310356 310357 310358 Order No. for inclination 45 300304 300305 300306 300307 300308 30030 300310 300311 300312 300313 300314 300315 300316 300317 300318 Standard version other covers at a surcharge 45 45 48 Perforated steel sheet
With system railings, diam. 40 Aluminium stairs with light-metal or steel steps, 60 deg. Width of the steps: 800 1,000 ; the stairs come with a handrail. In keeping with European standard EN ISO 14122, a second handrail is required for an ascent height of more than 500 and a lateral gap next to the stair check of more than 200, which can be delivered at a surcharge. Special dimensions to order, steps made of lightmetal grating, perforated light-metal sheet or steel grating see general information. Top of stairs with support angle; bottom end with non-slip ladder shoes (brackets for floor attachment to order). In keeping with German standard DIN 1055, these stairs cannot be used for domestic purposes. Intermediate sizes to order at the price of the next higher number of stairs. Stairs 60 deg. Fig. Order No. 310232 Number of steps 4 5 6 7 8 10 11 12 13 14 15 16 17 18 60 Width of the steps 800 1000 Second handrail at an extra charge sheet sheet sheet m 0.7 1.21 1.45 1.6 1.4 2.18 2.42 2.66 2.0 3.15 3.40 3.64 3.88 4.12 4.36 Base area m 0.70 0.84 0.8 1.12 1.26 1.40 1.55 1.6 1.82 1.6 2.10 2.24 2.38 2.52 2.66 Order No. 300204 300205 300206 300207 300208 30020 300210 300211 300212 300213 300214 300215 300216 300217 300218 Order No. 310204 310205 310206 310207 310208 31020 310210 310211 310212 310213 310214 310215 310216 310217 310218 Order No. 300224 300225 300226 300227 300228 30022 300230 300231 300232 300233 300234 300235 300236 300237 300238 Order No. 310224 310225 310226 310227 310228 31022 310230 310231 310232 310233 310234 310235 310236 310237 310238 Order No. 300324 300325 300326 300327 300328 30032 300330 300331 300332 300333 300334 300335 300336 300337 300338 Order No. 310324 310325 310326 310327 310328 31032 310330 310331 310332 310333 310334 310335 310336 310337 310338 Order No. for inclination 60 300284 300285 300286 300287 300288 30028 30020 30021 30022 30023 30024 30025 30026 30027 30028 Standard version other covers at a surcharge 60 60 Sb Perforated steel sheet 4
With system railings, diam. 40 Aluminium stairs with landing, 45 deg. Stable aluminium construction; with fastening profiles in the lower and upper sections; brackets to order at an extra charge. Delivered completely disassembled. Width of the steps: 800 1,000 ; size of landing:. Larger landings and special sizes to order; steps made of light-metal grating or perforated sheet metal as well as steel grating or perforated sheet metal see general information at the beginning of the chapter. Standard scope of delivery is grooved light metal with one-sided handrail and railing at the longitudinal size of the landing. Intermediate sizes to order at the price of the next higher number of stairs. If support surfaces or attachments are not rendered available by the customer, two brackets are required for attachment. Extra charge per bracket and railing along the face side: See general information at the beginning of the chapter. Fig. similar to Order No. 300478 Stair with landing, additionally with brackets and railing along the face-side. Standard version other covers at a surcharge. 45 Stairs 45 deg. Number of steps 4 5 6 7 8 10 11 12 13 14 15 16 17 18 Width of the steps/ Depth of steps / 240 m 0.83 1.05 1.25 1.46 1.67 1.87 2.08 2.2 2.50 2.70 2.1 3.12 3.33 3.54 3.75 Base area m 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 Order No. 300424 300425 300426 300427 300428 30042 300430 300431 300432 300433 300434 300435 300436 300437 300438 45 800 / 240 Order No. 300444 300445 300446 300447 300448 30044 300450 300451 300452 300453 300454 300455 300456 300457 300458 1000 / 240 Order No. 300464 300465 300466 300467 300468 30046 300470 300471 300472 300473 300474 300475 300476 300477 300478 Second handrail at an extra charge Order No. for inclination 45 300504 300505 300506 300507 300508 30050 300510 300511 300512 300513 300514 300515 300516 300517 300518 50
With system railings, diam. 40 Aluminium stairs with landing, 60 deg. Stable aluminium construction; with fastening profiles in the lower and upper sections; brackets to order at an extra charge. Delivered completely disassembled. Width of the steps: 800 1,000 ; size of landing:. Larger landings and special sizes to order; steps made of light-metal grating or perforated sheet metal as well as steel grating or perforated sheet metal see general information at the beginning of the chapter. Standard scope of delivery is grooved light metal with one-sided handrail and railing at the longitudinal size of the landing. Intermediate sizes to order at the price of the next higher number of stairs. If support surfaces or attachments are not rendered available by the customer, two brackets are required for attachment. Extra charge per bracket and railing along the face side: See general information at the beginning of the chapter. Stair with landing, additionally with brackets and railing along the face-side. Standard version other covers at a surcharge. 60 Stairs 60 deg. Number of steps 4 5 6 7 8 10 11 12 13 14 15 16 17 18 Width of the steps/ Depth of steps / 200 m 0.7 1.21 1.45 1.6 1.4 2.18 2.42 2.66 2.0 3.15 3.40 3.64 3.88 4.12 4.36 Base area m 1.15 1.28 1.42 1.56 1.70 1.80 1.7 2.11 2.25 2.3 2.53 2.66 2.80 2.4 3.08 Order No. 300364 300365 300366 300367 300368 30036 300370 300371 300372 300373 300374 300375 300376 300377 300378 60 800 / 200 Order No. 300384 300385 300386 300387 300388 30038 30030 30031 30032 30033 30034 30035 30036 30037 30038 1000 / 200 Order No. 300404 300405 300406 300407 300408 30040 300410 300411 300412 300413 300414 300415 300416 300417 300418 Second handrail at an extra charge Order No. for inclination 60 300584 300585 300586 300587 300588 30058 30050 30051 30052 30053 30054 30055 30056 30057 30058 51