LOUNGE MODELS SPINES Interior frame is constructed of plywood with tenon joints 1 of high grade polyurethane foam covers the top of spine Spines are available with or without seats 3 of high grade polyurethane foam covers a plywood seat construction (integrated seat models) Ganging brackets serve as wire management and are included with each spine Aluminum Legs Alvailable in Polished (265) or powder coated Cinder (462), Platinum Metallic (501), and Satin Nickel Metallic (503) Leveling Glides Hard, black glides are standard Soft, white glides are available at an upcharge Glides have a 1½ adjustment IMPROMPTU BENCH AND 120 Available in mobile and static models with two sizes options: 16 and 18 18 models are recommended for use with seated height worksurfaces Roll Control Casters Black, 37 mm double wheel, roll control casters are standard Casters are free rolling when sitting on unit Braking Casters Black, 50 mm double wheel, braking casters are available at an upcharge Casters are non-rolling when sitting on unit Breaking casters are recommended for use on hard floors Adds ½ to height to model Glides Hard, black leveling glides are standard Soft, white leveling glides are available at an upcharge Glides have a 1½ adjustment UPHOLSTERY Contrasting Fabric Contrasting fabric available on all Spine and Impromptu models See price list for specification and ordering details California Technical Bulletin All National chairs currently meet California Technical Bulletin #117-2013 For California Technical Bulletin #133 requirements, contact customer service
SPINE LEG OPTIONS POLISHED PLATINUM METALLIC SATIN NICKEL METALLIC CINDER IMPROMPTU LEG OPTIONS ROLL CONTROL CASTERS BRAKING CASTERS GLIDES CONTRASTING FABRIC SPINE SPINE SPINE IMPROMPTU
WORKSURFACE+TABLE MODELS WORKSURFACES AND TABLES Can be added to any spine in the field; worksurface attachment will deface spine 1 thick worksurfaces are laminate with softened PVC or clear PVC exposed plywood rim CSL option available on rectangular, 120, and wedge worksurfaces, and worksurface extension models Rectangular Worksurfaces Worksurface attachment will deface spine 36x38 model does not require legs 29x48 model must be used with two legs 29x96 model is used to span across spine providing a worksurface for users on each side and must be used with four legs (two on each side) Worksurface Extension Grommet option not available Can only be used as an extension off the 120 worksurface 120 Worksurface Designed to attach to 120 Spine No legs required Wedge Worksurface Must be supported by two table legs Bistro Table CSL laminate option not available Worksurface height is 44½ from top of surface to the floor Grommet option not available Can be attached to any L-Spine or T-Spine (with or without integrated seating) When attaching to Inline Spine models, the following must apply: Inline Spine models with Bistro Table must be ganged to an L-Spine, T-Spine, or 120 Spine (with or without integrated seating); bistro table must attach to an Inline Spine model with integrated seating LAMINATE Woodgrain Autumn 2 (AC2), Caramel (CL), Cordovan (CW), Judicial (DW), Honey 2 (HN2), Brighton (IM), Amber (MC), Mocha (MH), Natural (NM), Portobello (PB), Portobello Horizontal (PBH), Truffle (TF), Palisander (791), and Acorn (793) Solid Designer White (405), Mojave (417), Mouse (418), Wallaby (419), Shadow (425), Cloud (440), Graphite (461), Cinder (462), Platinum Grey (478), Frosty White (488), Designer White Linear (491) and Cinder Linear (492) Pattern Tungsten Evolv (809), White Tigris (814), Crisp Linen (818), Flax Gauze (819), Paloma Bisque (820), Elemental Concrete (821), Smoke Quarstone (822), and Bronze Legacy (874) CUSTOMER SPECIFIED LAMINATE (CSL) PROGRAM Available for HPL worksurfaces only Kozmic supports the CSL program at a 10% upcharge National orders and procures all CSL customer specified laminates Laminate sheen level not to exceed 60º for maximum durability of worksurfaces National reserves the right to decline a laminate which may not be suitable for application and assumes no responsibility for the durability, consistent coloration or any other performance characteristic of a customer specified laminate Reference price list for additional program information TABLE LEGS Rrectangular steel legs with 2 adjustable glides Available in Polished (265) or powder coated Cinder (462), Platinum Metallic (501), or Satin Nickel Metallic (503) Legs can be attached to worksurface at different angles
RIM OPTIONS PVC SOFTENED RIM CLEAR PVC EXPOSED PLYWOOD RIM CLEAR EXPOSED PLYWOOD EDGE TABLE LEG OPTIONS LAMINATE WORKSURFACES IM NM HN2 CL TF AC2 MC CW DW MH 792 793 791 405 417 418 419 425 440 461 462 478 488 491 492 809 814 818 819 820 821 822 874 LEG PAINT COLORS 265 462 501 503
POWER+DATA POWER+DATA OPTIONS Non-sequential Daisy chain solution; UL recognized; Field installable Circuit 1 Option Circuit 1 option allows 26 power grommets to be linked together Circuit 2 Option Circuit 2 option allows 52 power grommets to be linked together POWER ENTRY Must be ordered with power or USB grommet and electrical kits One power entry is necessary to power on or multiple units Hardwire Power Entry Hardwire + 4WC, Circuit 2 Electrical Power Entry 20 amp plug, Circuit 2 Available in 48 and 72 options ELECTRICAL KITS Model N87ELKT1 Includes one H-Block and one 42 jumper male/male end Order with Inline Spine models for power option Order with Inline Spine and 120 Spine models for pass thru option (non-power units) Model N87ELKT2 Includes wo H-Blocks, one 42 jumper male/male end and one 36 jumper male/male end Order with 120 Spine and L-Spine models for power option Order with L-Spine models for pass thru option (non-power units) Model N87ELKT3 Includes three H-Blocks, two 42 jumper male/male ends and one 36 jumper male/male end Order with T-Spine models for power option Order with T-Spine models for pass thru option (non-power units) GROMMETS Grommets are optional Available in white, black, light grey, and dark grey Power Grommet (G32) Must be used with Power Entry and Electrical Kits Features one power outlet Circuit 1 and Circuit 2 options USB Grommet (G32) Must be used with Power Entry and Electrical Kits Features two USB ports Circuit 1 and Circuit 2 options Grommet Cutout Options Inline Spine: 2 grommets per unit T-Spine: 5 grommets per unit L-Spine: 4 grommets per unit 120 Spine: 3 grommets per unit Rectangular Worksurface: 2 grommets per unit 120 Worksurface: 3 grommets per unit Wedge Worksurface: 1 or 2 grommets per unit
THOUGHT STARTERS THOUGHT STARTERS (2) 120 SPINE WITH SEATS (1) INLINE SPINE (2) 120 SPINES (1) INLINE SPINE (6) IMPROMPTU 120 MOBILE (2) IMPROMPTU BENCH MOBILE (2) 120 WORKSURFACES (2) 29X48 RECTANGULAR WORKSURFACES (4) TABLE LEGS (3) INLINE SPINES, SINGLE SEAT (3) L-SPINES WITH SEATS (2) BISTRO TABLES