Page 1 of 7 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 08/13/2015 Common Name: Hydrotreated Heavy Paraffinic Oil CAS Number: Blend Product Code: 18006 Synonyms: Antiwear Hydraulic Fluid Company Identification: Manufactured for: LYDEN OIL COMPANY 3711 LeHarps Road Youngstown, OH 44515 For Product Information: 1-330-792-1100 For Emergencies: 1-800-424-9300 CHEMTREC: 1-800-424-9300 or 1-703-527-3887 2 HAZARDS IDENTIFICATION Signal Word: None Hazard Classes/Categories: Hazard Statement(s): Precaution Statement(s): None None P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read label before use.
Page 2 of 7 Other Hazard Statement(s): Repeated exposure may cause skin dryness or cracking. 3 COMPOSITION / INFORMATION ON INGREDIENTS Ingredients: Mixture of the substances listed below with nonhazardous additions. Chemical Name CAS Number Percentage Distillates (petroleum), solvent-dewaxed heavy paraffinic 64742-65-0 >98 Additives Proprietary <2 *Any concentration shown as a range is to protect confidentiality or is due to batch variation. 4 FIRST AID MEASURES Description of First Aid Measures: Inhalation: Skin Contact: Eye Contact: Ingestion: No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice. Wash with soap and water. Remove contaminated clothing and wash before reuse. Get medical attention if needed. Rinse opened eye for several minutes under running water. If symptoms persist, consult medical attention. Rinse mouth with water. If symptoms develop, obtain medical attention. Symptoms and Effects, both acute and delayed: No further relevent data available.
Page 3 of 7 Recommended Actions: Treat symptomatically. Call a doctor or poison control center for guidance. 5 FIRE FIGHTING MEASURES Recommended Fire-Extinguishing Equipment: Use dry powder, foam, or carbon dioxide fire extinguishers. Water may be ineffective in fighting an oil fire unless used by experienced fire fighters. Possible Hazards During a Fire: Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide. Unidentified organic and inorganic compounds. Recommendations to Firefighters: Proper protective equipment including breathing apparatus. 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: Emergency Procedures: Avoid contact with skin, eyes, and clothing. Keep away from sources of ignition. Contain spilled material, collect in suitable and properly labled containers. Environmental Precautions: Do not allow to reach sewage system or any water course. Do not allow to enter ground waters.
Page 4 of 7 Cleanup Procedures: Pick up excess with inert absorbant material. 7 HANDLING AND STORAGE Handling Precautions: Storage Requirements: Handle with care and avoid spillage on the floor. Do not cut, weld, drill, grind, braze, or solder container. Keep container tightly sealed. Keep away from sources of ignition. 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limits: -64742-65-0 Distillates (petroleum), solvent-dewaxed heavy paraffinic (>98%): ACGIH TLV Long-term value: 5mg/m³ OSHA PEL Long-term value: 5mg/m³ Engineering Controls: Personal Protective Equipment: All ventilation should be designed in accordance with OSHA standard (29 CFR 1910.94). Wash hands before breaks and at the end of work. Use safety glasses and gloves. 9 PHYSICAL AND CHEMICAL PROPERTIES Color: Physical State: Odor: Odor Threshold: ph: Melting Point: Amber Liquid
Page 5 of 7 Boiling Point: >425 F Boiling Range: Flash Point: 193.3 C / 379.9 F (COC method) Evaporation Rate: Flammability: Flammability Limits: Vapor Pressure: Vapor Density: Relative Density: Solubilities: Insoluble in water Partition Coefficient: Auto-Ignition Temperature: Decomposition Temperature: Viscosity: 68 mm²/sec (kinematic at 40 C) 10 STABILITY AND REACTIVITY Stability: Reactivity: Conditions to Avoid: Hazardous Reactions: Incompatible Materials: Decomposition Products: Stable under normal conditions. Not reactive under normal conditions. Extreme temperature, sparks, open flame, and direct sunlight. No known hazardous reactions. No further relevant information available. Hazardous decomposition products are not expected to form.
Page 6 of 7 11 TOXICOLOGICAL INFORMATION Routes of Exposure: Exposure Effects: Measures of Toxicity: Carcinogenic/Mutagenic Precautions: Skin and eye contact are the primary routes of exposure although exposure may occur following accidental ingestion. Repeated skin contact may cause dermatitis or an oil acne. No test data available. Non-carcinogenic and not expected to be mutagentic. 12 ECOLOGICAL INFORMATION Ecological Precautions: Ecological Effects: Avoid exposing to the environment. No specific environmental or aquatic data available. 13 DISPOSAL CONSIDERATIONS Disposal Methods: Disposal Containers: Special Precautions: Dispose of waste material in accordance with all local, state, and federal requirements. Use properly approved container for disposal. Do not flush to surface waters or drains.
Page 7 of 7 14 TRANSPORT INFORMATION UN Number: UN Shipping Name: Transport Hazard Class: Packing Group: Environmental Hazards: Bulk Transport Guidance: Special Precautions: Not regulated by DOT. 15 REGULATORY INFORMATION This material and all of its components are listed on the Inventory of Existing Chemical Substances under the Toxic Substances Control Act. 16 OTHER INFORMATION Last Revision Date: 08/13/2015 The information contained in this (SDS) relates only to the specific material designated. LYDEN OIL COMPANY assumes no legal responsibility of the use or reliance upon this data. This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of the LYDEN OIL COMPANY.