Best in Abrasion Resistance Available in two strength classes, all Dura- slings feature premium abrasive resistant yarns covering all surfaces, for extended sling life and long term value. Dura- Features, Advantages and Benefits DURA-WEB NYLON SLINGS Tuff-Tag provides serial numbered identification for traceability Abrasion resistant fibers cover both faces and edges for greater sling life Red core yarn warning system aids in the inspection process Striped webbing helps identify proper capacity Dura- 000 Capacity stripes =,000 lbs. per inch of width (one ply only). 5% stronger than other webbing. The strongest abrasion resistant sling available. Eyes of Dura- 000 slings for Types --5 are not tapered in any width. Dura- slings meet or exceed OSHA and ASME B0.9 requirements. Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag. Saves Time Striped capacity for quick identification Dura- 000 Capacity Stripe =,000 lbs. per inch of width (one ply only). The only light duty web sling with an abrasive resistant surface. Wider bearing surface, per capacity, helps protect load surface. Dura- slings meet or exceed OSHA and ASME B0.9 requirements. Code Vertical V. Basket Code Vertical V. Basket Type U Type U UU-0 UU-0 UU-0 UU-0 UU-0 UU-0,000,000,000,000 0,00,00,00,00,00,00,00,500,000,000,000,000,00,00 UU-0,000,00,000 UU-0,000,00,000 Type Type EE-0 EE-0 EE-0 EE-0 EE-0 EE-0 EE-0 EE-0 EN-0 EN-0 EN-0 EN-0 EN-0 EN-0 EN-0 EN-0,000,000,000,000,000,000 0,00,00,000,000,000,000 7,00 5,00 0,00 5,00,00,00,00,00,00,00,00,500,00,00 9,00,00,00,00,00 0,00,000,000,000,000,000,000,00,00,000,000,000,000 5,00 0,00 0,00 5,00 Type EE-0 EE-0 EE-0 EE-0 EN-0 EN-0 EN-0 EN-0,000,000,000,000,000,000,900 7,00 00,00,00,00 Type 5 Type 5 Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Type,00,00,00,00,000,000,000,000,000,000 7,00 5,00 0-9-55 www.osc.c 5
WEBMASTER 00 SLINGS master 00 Polyester Slings Hardware Slings (TYPES U, AND ) Standard duty master 00 is designed for less frequent, light duty service. master Features, Advantages and Benefits Red core yarn warning system aids in the inspection process Code UU-0D UU-0D UU-0D TC-0D TT-0D UU-0D UU-0D UU-0D TC-0D TT-0D Vertical,00,00,00 7,00 7,00,00,500,00,00,00,900,900,00 5,00 NA,00 5,00,900 0,00 NA V. Basket,00 7,00 9,00,00,00 9,00,000 7,00 5,00 5,00 Proven sling web construction Tuff-Tag provides serial numbered identification for traceability Wider bearing surface per capacity helps protect load surface Yellow treatment for abrasion resistance and extended sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Eye and Eye Slings (TYPES AND ) Three Four EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D,00,00,00,00 7,00,00,00,500,00,00,500 7,000 9,00,000,000,00,000,000,000,500 950,900,900,00 5,00,900,00 5,00,900 9,00,00 5,00 7,500 9,00,00,00,00 9,00,00,00,00,00 7,00 9,00,00,00 9,00,000 7,00,00 7,000,000,00,000,000,00,000,000,000 7,000 Types and Endless Slings (TYPE 5) Note: Types U, and Tapering - Types and slings are tapered at " and wider unless otherwise specified. Type 5 (Endless) slings are NOT tapered unless specified. Type 5 Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Three Four EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D,00,00,500,00,00,00 9,00,700 5,500,500,00,500,00 0,00 9,00 7,700 5,500 0,00,00 7,00,900,00 5,00,900 9,00,00 7,700 9,00,00,000,900 0,000,000,00,00,00,00,00,00 0,00,00 9,00,000 7,00,00 9,00 9,00,00,000,00,00,00 5,00 5,00,000,00 5,00 75,00 0-9-55 www.osc.c
Steel Unilink Sling Hardware Combination Triangle and Fitting U. S. Patent No. 799 WEB SLING HARDWARE This forged, high carbon steel fitting, functions as both a triangle and choker. Features, Advantages and Benefits Forged steel for strength and reliability Smooth rounded profile helps protect sling, worker and load May be rewebbed to reduce cost Zinc dichromate plated for longer life Unilinks cost less than triangle/choker combinations Saves Time Large Crane hook opening - speeds rigging Positive -Trap capture - no need to stop and reposition web Functions both as a triangle and a choker - choke with either end Unilink Codes And Specifications Dimensions Part ( in.) Weight ( in.) No. L D H Thick (lbs.) SU. / / 9 / SU 5 / 7 / 5 /. SU / /. 0 Avoid contact of hardware with load edges. Unilink has the same rated capacities as TT or TC slings. Forged Aluminum Triangles and s Read Definition on page Aluminum is severely degraded by alkali, caustic environments, acids and salt water. Aluminum Triangles and s are available but may only be used with single ply web slings within the rated capacities shown in the table. They should not be used with Dura- 000 webbing. Forged from aircraft aluminum, this tough alloy is stronger than mild steel. Aluminum has the advantages of being lightweight, non-sparking and does not rust. Note: Aluminum triangles and chokers DO NOT offer the advantages of the -Trap feature. Aluminum fittings are not as durable and cost more than steel. 0-9-55 www.osc.co
WEB SLING HARDWARE -Trap Steel Sling Hardware - Triangles and s A significant improvement in triangle and choker design - featuring positive web capture. bing can slip to the side of ordinary fittings, not with -Trap. These fittings feature alloy steel for lighter sling weight and a zinc dichromate plating to inhibit rust. bing can slip with ordinary fittings. -Trap prevents side shift. Alloy Steel - For Or Slings Part No. Dimensions Weight Dimensions Weight Part L D T H ( lbs. ) No. L A D T H (lbs.) " ST- / / / 5 /. 0 SC- 5 / / / 5 /. 9 " ST- 7 / / /. 9 SC- / / / /. " ST- / / / " ST- 5 / / / / Part No. -Trap Triangles Alloy Steel - For Slings Part No. -Trap Triangles Alloy Steel - For Slings -Trap Triangles /.. Unlink is standard fitting - Triangle and chokers available on special order only. SC- 7 / / SC- 9 / 5 / / / / / 5. Dimensions Weight Dimensions Weight Part L D T H ( lbs. ) No. L A D T H (lbs.) 0" ST-0 / 5 7 / -Trap s -Trap s Dimensions Weight Dimensions Weight Part L D T H ( lbs. ) No. L A D T H (lbs.) " ST- 7 / / / SC- / 7 / / 7 / " ST- 7 / / / SC- / 7 / / 7 / 0" ST-0 / 5 / 7 / SC-0 7 / / 5 / / " ST- / 5 / / / 0 SC- / 0 5 / / / 0 -Trap s 5 SC-0 7 / / 5 / " ST- / 5 / / 7 SC- / 0 5 / / 5 0-9-55 www.osc.co 9
Accessories LODELOK HOOKS This versatile hook can be used on, Tuflex Roundlings, Wire Rope Slings or Chain Slings Engineered load bearing surfaces reduce bearing pressures Forged, positive interlocking nose latch fully engages tip of hook Locking mechanism designed for ease of use with gloved hand High cycling, long life spring Modified I-Beam construction for greater strength Forged alloy steel, quenched and tempered Every hook proof tested to times its Working Load Limit Engineered flat in hook's eye improves performance with web slings No catch points to snag lines Finish coat electrostatically and heat cured Lodelok Hook Part No. 9ELHCM ELHCM ELHCM 5ELHCM Working Load Limit @ :,00,00,00 Working Load Limit @ 5:,00 7,000,000,000 Chain Slings (G0 or G00) 9/ / / 5/ Wire Rope Slings (EIP, IWRC) / 9/ / 7/ Tuflex EN0 EN0 EN0 EN0 Slings (Eye & Eye, ) EE-0 EE-0 EE-0 EE-0 Slings (Eye & Eye, ) EE-0 EE-0 EE-0 EE-0 Slings (Endless, ) EN-0 EN-0 EN-0 EN-0 Slings (Endless, ) - EN-0 EN-0 EN-0 Note: Slings shown represent the maximum size to be used with each hook. Dimensions (In.) A G H Part No. A B C D E F Min G H J Approx. Wt. Ea. (Lbs.) J B 9ELHCM.00. 5..00.9.5.7 0..9. ELHCM.50.7 7..5 5.0.50.00 0.75.5. 9 ELHCM.. 9..75...59.00. 0. 5 5ELHCM.9. 0.7.00.0.5.9.5.. 5 F C D E J TO AVOID INJURY: Replace hook if nicked, gouged, cracked or hook exhibits any deformation. Inspect tip and throat for misalignment or deformation. Never apply shock loads. Do not side load or tip load. Do not exceed working load limit. Do not apply load to latch. Apply load slowly. 5 0-9-55 www.osc.co 7 Accessories
REVERSE EYE SLINGS Reverse Eye (RE) Slings The Best General Purpose Sling Available The Reverse Eye Sling is a modified endless sling, reinforced and protected on all sides. The most rugged and versatile of all web slings. The Lift-All enhanced version incorporates premium wear resistant webbing for protection on ALL surfaces. The Reverse Eye Sling is Not Just an Endless Sling with Wear Pads. B A Reverse Eye Features, Advantages and Benefits Superior choke hitch performance grips load securely Reinforced eyes augment strength Red core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability Wear resistant web cover offers superior abrasion resistance and sling life Reversible eyes reduce wear and increase sling life Top grade slings using Tuff-Edge webbing are armored on all four sides resulting in the toughest web sling available Single Endless with Reinforced Eyes A. Extended web length makes eyes. B. Reinforcing web piece sewn on to make eye. D E Added Wear Pads to Both Sides of Body and Eyes. C. Single Endless Sling with butted sides. D. Texturized Wear Pads on both sides of eyes. E. Texturized Wear Pads sewn on both sides of body. C Saves Time Eyes nest well on crane hook for easy rigging Flat eye construction is available to facilitate removal from under loads There are two grades of Lift-All Reverse Eye Slings: Tuff-Edge and master 00. Completed RE sling may be - or ply endless sling with reinforcing webbing for each loop, and texturized wear pad on each side of eyes and sling body. Three Heavy Duty RE Slings - Tuff-Edge Standard Duty RE Slings - master 00 Part No. RE-0T RE-0T RE-0T RE-0T RE-0T RE-0T RE-0T RE-0T Reverse eye slings using master 00 webbing are available on special order. Vertical,500 7,700,000,500,000 0,000,00 5,500,00,00,00 5,00 0,00,000,00 0,00 Sling Thickness Sling Eye L ength Part No. V. Basket ( in. ) ( in. ) ( in. ) Vertical 9,000 5,00,000,000,000 0,000,00 5 / 5 / 5 / / / / / / Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. 9 5 9 5 RE-0 RE-0 RE-0 RE-0 RE-0 RE-0 RE-0 RE-0,00,00,000 5,00 0,500,00,000 0,000,900 5,00,00,00,00,500,00,000 Sling Thickness V. Basket 7,00,00,000 0,00,000,00,000 0,000 0-9-55 www.osc.co / / / / / / / / 7
TUFF-EDGE F E III 5% Higher Retained Strength 0% Better Edge Cut Resistance THE NEW STANDARD FOR HEAVY DUTY INDUSTRIAL SLINGS! Tuff-Edge Polyester U. S. Patent No. 57 Our original Tuff-Edge webbing improved web sling edge durability with its superior edge yarns. Now Tuff-Edge II web is here to give you even greater sling life. Not only does Tuff-Edge II maintain the same great edge advantage as Tuff-Edge (0% cut & 7% abrasion resistance improvement over standard sling webbing), but it also has greatly improved surface abrasion resistance as a result of a special coating not found on other webs. Using the standard ASTM D770-0 test method for abrasion resistance of textile webbing, Tuff-Edge II webbing was compared to Tuff-Edge webbing. After being subjected to the same number of hex bar abrasion cycles, Tuff-Edge II retained an average break strength that was 5% higher than Tuff-Edge! Although you should always pad and protect synthetic slings from load edges, normal wear and tear should be greatly reduced when using Tuff-Edge II, giving you greater sling life and reduced sling costs. % Retained Strength 00 Strength Retention Comparison 0 0 0 0 0 5 7 9 Sample Breaks After Abrasion Tuff-Edge II Tuff-Edge Polymer coated edge yarns resist cutting and abrasion to extend sling life Silver colored web treatment fights abrasion for additional sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Saves Time Easy identification - silver body, blue edges, blue center stripe Always use Wear Pads to protect synthetic slings from being cut by load edges. Tuff-Edge II Features, Advantages and Benefits Red Core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability See page Proven sling web construction 0 7 0-9-55 www.osc.co
TUFF-EDGE WORKS! master 00 Nylon and Polyester Slings The Traditional Standard for Heavy Duty Slings This grade of synthetic web sling is popular because most users consider its' strength and service life to be a good buy. Features, Advantages and Benefits Red core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability Proven sling web construction Yellow treatment for abrasion resistance and extended sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag. Note: Polyester web is identified by single blue surface stripe. 0-9-55 www.osc.co
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Type U Unilink Hardware Slings (Also available as Types & at same Rated Capacities) Tuff-Edge Part No. UU-0T UU-0T UU-0T UU-0T UU-0T UU-0T Vertical,00,00,00,00,00,500,500,00,900 9,00 V. Basket,00 9,00,00,00 7,00,000 master Part No. UU-0D UU-0D UU-0D UU-0D UU-0D UU-0D Type (TC) and Type (TT) -Trap Hardware Slings Type (TC) Type (TC) Type (TT) Type (TT) master Tuff-Edge Part No. Part No. T ype T ype ( in. ) Vertical V. Basket T ype Type TC-0T TC-0T TC-0T TC-T TC-T TT-0T TT-0T TT-0T TT-T TT-T 0 9,00,00,000 9,00 5,500 7,700 0,00,00 5,00 0,00 9,00 5,00,000,00 TC-0D TC-0D TC-0D TC-D TC-D TT-0D TT-0D TT-0D TT-D TT-D TC-0T TC-0T TC-0T TC-T TC-T TT-0T TT-0T TT-0T TT-T TT-T 0,00,00,000,00,00,00 7,900,00,00 5,00,00,00 7,00 9,00 TC-0D TC-0D TC-0D TC-D TC-D TT-0D TT-0D TT-0D TT-D TT-D Note: ", " and " Hardware Slings feature Unilink fittings. (See dimensions page.) -Trap Triangles and s are also available. (See dimensions page 9.) Three and four ply hardware slings and wider width hardware slings are available upon request. Type (TT) can not be used in a choker hitch. Delete the "D" to order nylon. (See "How to Order" on page 7.) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. 9 0-9-55 www.osc.co
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Eye and Eye Slings (Flat or Twisted) Type (Flat Eye) Type (Flat Eye) Type (Twisted Eye) Type (Twisted Eye) Three Four Tuff-Edge Part No. EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T ( in.) Vertical,00,00,00,00 0 0 0 0 9,00,00,000 9,00,00,00,00,500,00 9,00,00,900,00,00,500,000,000 0,700,00,000 0,000,900 9,00 9,00 9,700 9,00 59,500 Rated Capacity (lbs.),50,500,00 7,700 0,00,00 5,00,500,900 9,00,000 5,00 7,900,500,00,00 0,000,00,00,500 9,00 5,00,000,000,900 5,00,00,700 9,00 7,00 V. Basket,00,00 9,00,00 9,00 5,00,000,00,00,00 7,00,000,00,00,00 5,00,00,00,000,000,00 7,00,000 0,000 0,000 9,00 9,00 59,00 79,00 99,00 9,000 master Part No. EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D Always use Wear Pads to protect synthetic slings from being cut by load edges. See page Note: Tapering - Types and slings are tapered at " and wider unless otherwise specified. Delete the "D" to order nylon. (See "How to Order" on page 7.) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Eye Length (Applies to all ) Plies of Sling 0 / 0 0 / 0 0 0 0 0 0-9-55 www.osc.c
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Endless Slings Type 5 Type 5 Three Four Tuff-Edge Part No. EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T ( in.) Vertical V. Basket,00,500,00,00,00,00,900 7,00,500 9,00,000 0 0 0 0,00 9,00,00,900,00,00,00 0,700,00 0,700,00 7,00,000,000,500,700 0,700,000 5,500 59,00 0,000 9,00,700 5,00 50,500 57,00 7,00 0,700,000 5,00 7,900,500,900 9,00,000,500,000,500,00 0,000,00,00 7,00,000,500,00,00 7,00,000 5,00,00,00 0,00,000 5,700,500,00,00,00 5,00,00,00,00,00 57,00,00 7,00 75,00,000,000,000 57,00,00 9,000 0,000,00 0,000 9,00 5,00 7,00 0,000 5,00,00,00 master Part No. EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D Always use Wear Pads to protect synthetic slings from being cut by load edges. See page Note: Type 5 (Endless) slings are Not tapered unless specified. Delete the "D" to order nylon. (See "How to Order" page 7) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Tuflex is an Alternative For three and four ply slings wider than ", Tuflex Roundslings should be seriously considered. Tuflex offers increased flexibility, ease of use and lower cost. (See pages through.) 0-9-55 www.osc.c
Stone Handling (SH) Slings STONE HANDLING SLINGS Special abrasion resistant -inch nylon webbing for handling stone, concrete and building panels. Lift-All Stone Handling Slings feature a soft abrasion resistant wear pad woven onto the load side of the webbing, providing outstanding protection for both the sling and the polished stone surfaces. Note: EE Sling - flat eye only - untapered " eye length. Features, Advantages and Benefits Red core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability Proven sling web construction Part No. UU-SH EE-SH EN-SH UU-SH EE-SH EN-SH Vertical 5,00 5,00,000 9,00 9,00,000,000,000,000 7,000 7,000,000 V. Basket 0,00 0,00,000,00,00,000 Heavy, soft yarns on load side to help protect the sling from abrasion White pile yarns prevent color transfer to load Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. ply version results in an abrasion resistant face on both sides Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Saves Time ply version with abrasion resistance on both sides, does not need orientation by rigger 0-9-55 www.osc.c
TUFF-EDGE HARDWARE / BRIDLE SLINGS Hardware/Bridle Slings Useful when fixed lifting points are available. Features, Advantages and Benefits Tuff-Edge web material is standard - helps prevent sling damage Better load control and balance by using fixed fitting points and multiple legs Standard oblong links and hooks are forged from alloy steel for strength and reliability Red core yarn warning system aids in the inspection process Hardware avoids cutting and abrasion of sling at bearing points Tuff-Tag provides serial numbered identification for traceability Soft web sling legs protect load Endless type allows shifting of wear points Tuff-Edge material extends sling life Sling hooks and links can be rewebbed Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Saves Time Lighter weight and easier to use than chain or wire rope Sling hooks quickly connect to loads having hoist rings or eye bolts Proven sling web construction How to Order S O S - EE - 0T x Number of Legs S - (Single - ) D - (Double - ) T - (Triple - ) Length of Assembly - Feet Q - (Quad - ) Bearing point to bearing point Master Link Sling Code O - (Oblong) Refer to page 7 for Code Definitions Bottom Attachments S - (Sling Hook) O - (Oblong) 0-9-55 www.osc.c
> > TUFF-EDGE HARDWARE / BRIDLE SLINGS > > > > Length Length SOS DOS TOS QO Single Leg Double Leg Triple Leg Quad Leg Oblong Link Oblong Link Oblong Link Oblong Link Sling Hook Sling Hook Sling Hook (EE-0T) (EE-0T) (EE-0T) (EE-0T) > Length Length > > E R T Hardware/Bridle Slings Part No. For Sling Legs Plies Number of Legs Oblong Link ( in.) Sling Hook (Alloy) Vertical @ 0 @ 5 @ 0 A x B x C S ize E x R x T Single,00 / x / x 5 TA / x / x EE-0T Double,700,00,00 / x / x 5 Triple,00,00,00 / x x TA / x / x TA / x / x Quad 5,500,500,00 x x TA / x / x Single,000 / x / x 5 EE-0T Double 5,00,00,000 / x x Triple 7,700,00,500 / x x /TA 7 / /TA 7 / /TA 7 / x / x / x / x / x / x / Quad 0,00,00,000 x x /TA 7 / x / x / Single,000 / x / x 5 EE-0T Double 5,00,00,000 / x x Triple 7,700,00,500 / x x / A 7 / /TA 7 / /TA 7 / x / x / x / x / x / x / Quad 0,00,00,000 x x /TA 7 / x / x / Single,000 / x x TA / x / x / EE-0T Double 0,00,00,000 x x TA / Triple 5,500,700 9,000 x x TA / Quad 0,700,900,000 / x / x / TA / x / x / x / x / x / x / NOTE: Hardware capacities correspond to the appropriate sling capacities. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. 9 0-9-55 www.osc.c
TUFF-EDGE F E III 5% Higher Retained Strength 0% Better Edge Cut Resistance THE NEW STANDARD FOR HEAVY DUTY INDUSTRIAL SLINGS! Tuff-Edge Polyester U. S. Patent No. 57 Our original Tuff-Edge webbing improved web sling edge durability with its superior edge yarns. Now Tuff-Edge II web is here to give you even greater sling life. Not only does Tuff-Edge II maintain the same great edge advantage as Tuff-Edge (0% cut & 7% abrasion resistance improvement over standard sling webbing), but it also has greatly improved surface abrasion resistance as a result of a special coating not found on other webs. Using the standard ASTM D770-0 test method for abrasion resistance of textile webbing, Tuff-Edge II webbing was compared to Tuff-Edge webbing. After being subjected to the same number of hex bar abrasion cycles, Tuff-Edge II retained an average break strength that was 5% higher than Tuff-Edge! Although you should always pad and protect synthetic slings from load edges, normal wear and tear should be greatly reduced when using Tuff-Edge II, giving you greater sling life and reduced sling costs. % Retained Strength 00 Strength Retention Comparison 0 0 0 0 0 5 7 9 Sample Breaks After Abrasion Tuff-Edge II Tuff-Edge Polymer coated edge yarns resist cutting and abrasion to extend sling life Silver colored web treatment fights abrasion for additional sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Saves Time Easy identification - silver body, blue edges, blue center stripe Always use Wear Pads to protect synthetic slings from being cut by load edges. Tuff-Edge II Features, Advantages and Benefits Red Core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability See page Proven sling web construction 0 5 0-9-55 www.osc.c
TUFF-EDGE WORKS! master 00 Nylon and Polyester Slings The Traditional Standard for Heavy Duty Slings This grade of synthetic web sling is popular because most users consider its' strength and service life to be a good buy. Features, Advantages and Benefits Red core yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability Proven sling web construction Yellow treatment for abrasion resistance and extended sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag. Note: Polyester web is identified by single blue surface stripe. 0-9-55 www.osc.c
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Type U Unilink Hardware Slings (Also available as Types & at same Rated Capacities) Tuff-Edge Part No. UU-0T UU-0T UU-0T UU-0T UU-0T UU-0T Vertical,00,00,00,00,00,500,500,00,900 9,00 V. Basket,00 9,00,00,00 7,00,000 master Part No. UU-0D UU-0D UU-0D UU-0D UU-0D UU-0D Type (TC) and Type (TT) -Trap Hardware Slings Type (TC) Type (TC) Type (TT) Type (TT) master Tuff-Edge Part No. Part No. T ype T ype ( in. ) Vertical V. Basket T ype Type TC-0T TC-0T TC-0T TC-T TC-T TT-0T TT-0T TT-0T TT-T TT-T 0 9,00,00,000 9,00 5,500 7,700 0,00,00 5,00 0,00 9,00 5,00,000,00 TC-0D TC-0D TC-0D TC-D TC-D TT-0D TT-0D TT-0D TT-D TT-D TC-0T TC-0T TC-0T TC-T TC-T TT-0T TT-0T TT-0T TT-T TT-T 0,00,00,000,00,00,00 7,900,00,00 5,00,00,00 7,00 9,00 TC-0D TC-0D TC-0D TC-D TC-D TT-0D TT-0D TT-0D TT-D TT-D Note: ", " and " Hardware Slings feature Unilink fittings. (See dimensions page.) -Trap Triangles and s are also available. (See dimensions page 9.) Three and four ply hardware slings and wider width hardware slings are available upon request. Type (TT) can not be used in a choker hitch. Delete the "D" to order nylon. (See "How to Order" on page 7.) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. 7 0-9-55 www.osc.c
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Eye and Eye Slings (Flat or Twisted) Type (Flat Eye) Type (Flat Eye) Type (Twisted Eye) Type (Twisted Eye) Three Four Tuff-Edge Part No. EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-0T EE-T ( in.) Vertical,00,00,00,00 0 0 0 0 9,00,00,000 9,00,00,00,00,500,00 9,00,00,900,00,00,500,000,000 0,700,00,000 0,000,900 9,00 9,00 9,700 9,00 59,500 Rated Capacity (lbs.),50,500,00 7,700 0,00,00 5,00,500,900 9,00,000 5,00 7,900,500,00,00 0,000,00,00,500 9,00 5,00,000,000,900 5,00,00,700 9,00 7,00 V. Basket,00,00 9,00,00 9,00 5,00,000,00,00,00 7,00,000,00,00,00 5,00,00,00,000,000,00 7,00,000 0,000 0,000 9,00 9,00 59,00 79,00 99,00 9,000 master Part No. EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-0D EE-D Always use Wear Pads to protect synthetic slings from being cut by load edges. See page Note: Tapering - Types and slings are tapered at " and wider unless otherwise specified. Delete the "D" to order nylon. (See "How to Order" on page 7.) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Eye Length (Applies to all ) Plies of Sling 0 / 0 0 / 0 0 0 0 0-9-55 www.osc.c
TUFF-EDGE AND WEBMASTER 00 POLYESTER SLINGS Endless Slings Type 5 Type 5 Three Four Tuff-Edge Part No. EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-0T EN-T ( in.) Vertical V. Basket,00,500,00,00,00,00,900 7,00,500 9,00,000 0 0 0 0,00 9,00,00,900,00,00,00 0,700,00 0,700,00 7,00,000,000,500,700 0,700,000 5,500 59,00 0,000 9,00,700 5,00 50,500 57,00 7,00 0,700,000 5,00 7,900,500,900 9,00,000,500,000,500,00 0,000,00,00 7,00,000,500,00,00 7,00,000 5,00,00,00 0,00,000 5,700,500,00,00,00 5,00,00,00,00,00 57,00,00 7,00 75,00,000,000,000 57,00,00 9,000 0,000,00 0,000 9,00 5,00 7,00 0,000 5,00,00,00 master Part No. EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-0D EN-D Always use Wear Pads to protect synthetic slings from being cut by load edges. See page Note: Type 5 (Endless) slings are Not tapered unless specified. Delete the "D" to order nylon. (See "How to Order" page 7) Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. Tuflex is an Alternative For three and four ply slings wider than ", Tuflex Roundslings should be seriously considered. Tuflex offers increased flexibility, ease of use and lower cost. (See pages through.) 9 0-9-55 www.osc.c
Wide-Lift (WL) Slings Wide Load Support and Balance Lift-All Wide-Lift slings support the load over a wide area to offer better balance for large loads - whether heavy or light. Wide bearing area reduces marring of soft load surfaces. Stiffeners are used at the base of the eyes to deter the body webbing from folding down the middle. Wide-Lift slings are for use in basket hitch only. WIDE-LIFT SLINGS All Wide-Lift Slings offer these benefits: Red Core Yarn warning system aids in the inspection process Tuff-Tag provides serial numbered identification for traceability Proven sling web construction Wide bearing area reduces marring of soft load surfaces Yellow treatment for abrasion resistance and extended sling life Tuff-Tag provides required OSHA information for the life of the sling, not just the life of the tag Attached Eye Wide-Lift For Light, Bulky Loads - Lifting eyes are attached to a single ply sling body. Available with eyes (WLA) or eyes (WLA). Continuous Eye Wide-Lift For Heavy Loads - Constructed from one endless sling with the two body lengths butted and joined side by side. Eye Tuff-Edge may be used for the attached eyes. Custom slings with higher capacities are available. Tuflex slings are also available as Wide-Lift Slings. See page. 0 Body 0 0 Part No. WLA-0 WLA-0 WLA-0 WLA- WLA- WLA-0 WLA- Rated Capacity (lbs.) Vertical Basket 5, 000 0,000 0,000 0,000 WLA-0 0,000 WLA-0 0,000 0 WLA-0 0,000 WLA- 0,000 WLA-,000 0 WLA-0,000 Eye WLA-,000 0 WLA-0,000 WLA-,000 Note: Not recommended WLA- for use in a choker,000 hitch. Eye Length 0 0 0 0 7 Eye Body 0 0 0 0 Part No. WL-0 WL-0 WL- WL- WL-0 WL- WL-0 WL- WL-0 WL-0 WL- WL- WL-0 WL- WL-0 WL- Rated Capacity (lbs.) Vertical Basket 5,00 0,00 0,00,000,00,000 57,00 7 90,000 0,000 90,000 90,000 Eye Length 9 0 5 5 9 0 5 5 Tapered Eye / / / / 5 Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Refer to Effect of Angle chart page 0. 0 0-9-55 www.osc.c
Lift-All Drum Handling Slings provide an easy, inexpensive way to handle steel drums. Available in two styles to suit your needs for handling drums in the vertical or horizontal position. DRUM HANDLING SLINGS Vertical Drum Handling Slings Easily lift standing drums for transport. Tilt suspended drums to pour from open top or spigot. For use with ribbed steel drums, the ratcheting belly band tightens securely below the first rib. Lightweight version (DSV0) uses " polyester sling webbing and is rated for 00 lb. loads. Heavyweight sling (DSV0) uses " polyester sling webbing and is rated at 50 lbs. A wear pad, sewn on one side of the lifting strap, helps to avoid cutting of the sling. Vertical Ratchet tightens securely. To Order, specify Part No. and drum diameter in Saves Time inches. i.e.: DSV0x (The standard 55 gal. drum has a " diameter.) Free end of ratchet strap sewn to stay properly threaded. Vertical legs sewn to belly band to maintain proper position. Horizontal Note: If using in a chemical environment, contact Lift-All for sling material advice. Horizontal Drum Handling Slings Ideal for the quick and easy moving of steel drums in the horizontal position. Part No. DSH0 uses " polyester sling webbing and is rated at,500 lbs. Strong " polyester webbing pulls drum hooks securely into rims at both ends of the drum during lift. Saves Time sling fits multiple size drums. Easy to disconnect. Uses /" oblong link at top for easy connection to hoist hook. To Order, specify Part No. DSH0. 0-9-55 www.osc.c