MATERIAL SAFETY DATA SHEET Product Name: Gas Mixture (CARBON MONOXIDE IN AIR) DOT ID No:

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEETS /E-3

AMMONIA IN NITROGEN SYNONYMS: None

Intermountain Specialty Gases 520 North Kings Rd, Nampa, Idaho Phone: Fax:

Hydrogen in Air % to 2%

MATERIAL SAFETY DATA SHEET Product Name: Gas Mixture (1ppm - 50% Carbon dioxide + Balance Nitrogen) DOT Hazard Class: Emergency No: UN 1956

SIG SOUTHERN INDUSTRIAL GAS SDN BHD

1. PRODUCT IDENTIFICATION 2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

Compressed gases. Safety advice.

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Hydrogen in Air % to 2%

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

MATERIAL SAFETY DATA SHEET

Refrigerant R170 - ETHANE

SAFETY DATA SHEET Nitrogen (Expellant)

Quebec Quebec Tel : Fax : MSDS: Methane, Oxygen in Nitrogen Mixture PRODUCT INFORMATION

This product is intended for research and laboratory use only. This product is not to be used as human or

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

OSHA regulated. NE NE No No No. NE NE No No No

SAFETY DATA SHEET ENTONOX (GAS MIXTURE OF 50% NITROUS OXIDE + 50% OXYGEN)

Nitrogen (Expellant) This MSDS has been compiled in accordance with - EC Directive 91/155/EC - OSHA's Hazcom Standard (29 CFR 1910.

Quebec Quebec Tel : Fax : MSDS: Hydrogen 25% in Nitrogen Mixture PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET

Safety Data Sheet H Section 1 Identification. Section 2 Hazards Identification. Industrial Water Treatment

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET - CALIBRATION CHECK GAS. MSDS NO: 86 Version:3 Date: January, 2000

SAFETY DATA SHEET Argonite (Fire Extinguishing Agent and Expellant)

Material Safety Data Sheet Magnesium EDTA, 0.02% w/v. Section 1 - Chemical Product and Company Identification

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

This product is intended for research and laboratory use only. This product is not to be used as human or

SAFETY DATA SHEET WHITE FOAM DETERGENT CONCENTRATE

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

SAFETY DATA SHEETS. This SDS packet was issued with item:

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Activated Carbon %

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Material Safety Data Sheet Phenylarsine oxide. Section 1 - Chemical Product and Company Identification

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Helium FORMULA: He CAS: RTECS #: MH

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

Section I Date Prepared June 11, 2011 Signature of Preparer (optional) One BernzOmatic Drive. Medina, NY 14103

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

Tween-20 - ULTRA PURE

Material Safety Data Sheet Oxygen

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101

CYCLO INDUSTRIES, LLC MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

*MATERIAL SAFETY DATA SHEET*

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Potassium Iodate-Iodide, M - 0.1N. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Brij 35, 30% w/v. Section 1 - Chemical Product and Company Identification

Carolina Narrow Fabric Company

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET EM SCIENCE

Quebec Quebec Tel : Fax : MSDS: Hydrogen Sulfide in Nitrogen Mixture PRODUCT INFORMATION

Material Safety Data Sheet

BENZOIN COMPOUND TINCTURE

MAPP Gas. Material Safety Data Sheet

Mittler Supply Inc. MATERIAL SAFETY DATA SHEET- NITROUS OXIDE

MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

Material Safety Data Sheet Xylenol Orange, 0.1% Aqueous. Section 1 - Chemical Product and Company Identification

Quebec Quebec Tel : Fax : MSDS: Argon Compressed PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Nitrogen, Compressed

MATERIAL SAFETY DATA SHEET. Oxygen, Refrigerated Liquid DOT Hazard Class: 2.2

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Product Identification. Hazard Overview

Material Safety Data Sheet Safranin, 1% aqueous. Section 1 - Chemical Product and Company Identification

JeTT Research & JeTT SeTT

Quebec Quebec Tel : Fax : MSDS: Methane Compressed PRODUCT INFORMATION

PRODUCT INFORMATION HAZARDOUS INGREDIENTS PHYSICAL DATA. Tel: Fax: Internet:

Material Safety Data Sheet Sodium Ammonium Phosphate Solutions. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET CERAMIC GLAZE

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

EXPRESS GEL HAND SANITIZER. Use only for the purpose on the product label.

MATERIAL SAFETY DATA SHEET PAGE 1

Safety Data Sheet Oxygen PurityPlus Gases 6331 East 20th Street P.O. Box Indianapolis, IN (tel)

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

Safety Data Sheet. Revision Date: November, 16 th 2017 Issue Date: January 25, Product and Company Identification

Nitrous Oxide, % to 1.0% in Air

MATERIAL SAFETY DATA SHEET

Transcription:

MATERIAL SAFETY DATA SHEET Product Name: DOT ID No: DOT Hazard Class: Emergency No.: UN 1956 2.2 +971-6-5336481 Page No. : 1/5 DOT Shipping Label : Non-Flammable Gas Date last updated: 03/10/2009 Chemical Product Product Name: Carbon Monoxide in Air Synonyms: None 1. Composition/Information on Ingredients Ingredient Formula CAS Number Concentration OSHA PEL ACGIH TLV Carbon Monoxide CO 630-08-0 0.0026-8.5% 50 25 Air O 2 /N 2 132259-10-0 Balance NE NE NE: None Established S/A: Simple Asphyxiant 2. Hazards Identification ***EMERGENCY OVERVIEW*** High Pressure gas. May accelerate composition. Acts on blood causing damage to central nervous system. Potential Acute Health Effects: Routes of Entry Acute Effects Chronic Effects Medical Conditions Aggravated by Overexposure Carcinogenicity (US Only) Inhalation Carbon monoxide is highly toxic by reduction of blood s oxygen carrying capacity resulting in oxygen starvation of body cells. Symptoms include shortness, headache, confusion, nausea, dizziness, and Cardiovascular problems.. None known None known NTP - No IARC Monographs No OSHA Regulated - No 3. First Aid Measures Eyes Inhalation Immediately remove victim to fresh air. If breathing has stopped, give artificial respiration. If breathing is difficult, give oxygen.

Page No.: 2/5 Skin Contact Ingestion In Event of Exposure, Consult a Physician Note to Physician 4. Fire Fighting Measures Product Flammability Hazards Combustion Products Extinguishing Media Special Fire fighting instruction and Equipment Unusual Fire and Explosion Hazards 5. Accidental Release Measures Clean Up Procedure Specialized Equipment Non- flammable Use what is appropriate for surrounding fire Wear self-contained breathing apparatus and full protective clothing. Keep fire exposed cool with water spray. Escaping gas mixture containing 19-24% Oxygen (air) vigorously supports and may accelerate composition of surrounding materials. Cylinders rapture may occur under fir conditions. Evacuate and ventilate area. Remove leaking cylinder to exhaust hood or safe outdoor area. Remove source of ignition and combustibles.. 6. Handling and Storage Precautions To Be Taken in Handling Precautions To Be Taken in Storage Secure cylinder when using to protect from falling. Use suitable hand truck to move cylinders. Store in well ventilated areas. Keep valve protection cap on cylinders when not in use. 7. Exposure Controls/Personal Protection Engineering Controls Provide adequate general and local exhaust ventilation to maintain concentration below the exposure limits. Eye/Face Protection Use safety goggles or glasses. Skin Protection Respiratory Protection In Case of leakage, use self-contained breathing apparatus.

Page No.: 3/5 Protective Equipment Safety Shoes when handling cylinders. 8. Physical and Chemical Properties Appearance Odor Physical Pressure Vapor Pressure Vapor Density (air=1) Boiling Point (c) Solubility in Water Specific Gravity (H 2 O=1) Evaporation Rate Odor Threshold Colorless. Odorless. Gas. 1.09 0.0187 Gas None 9. Stability and Reactivity Stability Conditions to Avoid Materials to Avoid Hazardous Polymerization Hazardous Decomposition This product is Stable under normal storage conditions. Storage in poorly ventilated areas. Storage near a heat source. Toxic Carbon Monoxide reacts with BrF3, SC2O, ClF3, lf7, NF3, O2, OF2, Ag2O, and oxidizing materials. Flammable and combustible materials, especially greases and oil. Will not occur. 10. Toxicological Information Lethal Concentration (LC50) Lethal Dose 50 (LD50) Teratogenicity Reproductive Effects Mutagenicity 3760 ppm, Rat 1 hour.

Page No.: 4/5 11. Ecological Information No adverse ecological effects are expected. 12. Disposal Considerations Waste Disposal Method Dispose of non-refillable cylinders in accordance with federal, state and local regulations. Allow gas to vent slowly to atmosphere in an unconfined area or exhaust hood. If the cylinders are the refillable type, return cylinders to supplier with any valve outlet plugs or caps secured and valve protection caps in place. 13. Transport Information DOT Description PROPER SHIPPING NAME : Compressed Gas, N.O.S. HAZARD CLASS : 2.2 (nonflammable) IDENTIFICATION NUMBER : UN 1956 SHIPPING LABEL(s) : NONFLAMMABLE GAS ADR / RID (EU Only) Special Precautions Class 2, 1A Cylinders should be transported in secure upright position in a well ventilated truck. 14. Regulatory Information SARA OSHA (Process safety Management) TSCA EU Number Number in Annex 1 of DIR 67/548 The threshold planning quantity for this mixture is 10,000 lbs. Minor component is not listed in appendix A of 29 CFR 1910.119 as a highly hazardous chemical. Mixture is not listed in TSCA inventory. Mixture is not listed in annex 1.

Page No.: 5/5 15. Other Information Other Precautions Protect containers from physical damage. Do not deface cylinders or labels. Cylinders should be refilled by qualified producers of compressed gas. Shipment of a compressed gas cylinder which has not been filled by the owner or with his written consent is a violation of federal law (49 CFR). Abbreviations Not Applicable, N/Av Not Available, SA Simple Asphyxiant, NE None Established. DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: The MSDS information is based on sources believed to be reliable. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse are beyond our control, makes no warranty, either expressed or implied, with respect to the completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. Also, additional information may be necessary or helpful for specific conditions and circumstances of use. It is the user's responsibility to determine the suitability of this product and to evaluate risks prior to use, and then to exercise appropriate precautions for protection of employees and others.