Lei Li School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164 (509) 335 4034 lei.li2@wsu.edu EDUCATION Ph.D., Industrial and Systems Engineering, 2009 University of Science and Technology of China, Hefei, China M.S., Precision Machinery and Precision Instrumentation, 2004 B.S., Computer Science and Applications, 2001 B.S., Precision Machinery and Precision Instrumentation, 2001 RESEARCH EXPERIENCE Assistant professor 08/2013 present School of Mechanical and Materials Engineering, Washington State University, Pullman, WA Postdoctoral Researcher 03/2012 08/2013 Department of Integrated Systems Engineering, Postdoctoral Researcher 10/2009 02/2012 NSF Center for Affordable Nanoengineering of Polymeric Biomedical Devices, Graduate Research Fellow 09/2004 09/2009 Department of Industrial and Systems Engineering and NSF Center for Affordable Nanoengineering of Polymeric Biomedical Devices, Graduate Research Associate 09/2001 06/2004 Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei, China JOURNAL PUBLICATIONS [1] H. Zhang, S. Scheiding, L. Li, A. Gebhardt, S. Risse, R. Eberhardt, A. Tünnermann, A. Y. Yi, Manufacturing of a precision 3D microlens array on a steep curved substrate by injection molding process, Advanced Optical Technologies, 2(3), 257-268 (2013) [2] P. He, L. Li, J. Yu, W. Huang, Y.-C. Yen, L.J. Lee, A.Y. Yi, Graphene coated Si mold for precision glass optics molding, Optics Letters, 38(14), 2625-2628 (2013) [3] W. Huang, Y. Jianfeng, K. J. Kwak, D. Gallego-Perez, W. Liao, H. Yang, X. Ouyang, L. Li, W. Lu, G. Lafyatis, and L. J. Lee, Carbide-bonded graphene coating, Adv. Mater., Page 1 of 5 Lei Li CV
accepted (2013) [4] J. Zhou, L Li, N. Naples, T. Sun, A.Y. Yi, Fabrication of continuous diffractive optical elements using a fast tool servo diamond turning process, J. Micromech. Microeng., 23,075010, (2013) [5] N. Zhang, F. Yang, L Li, C. Shen, J. Castro, L.J. Lee, Thickness effect on particle erosion resistance of thermoplastic polyurethane coating on steel substrate, wear, 303, 49-55 (2013) [6] H. Zhang, L. Li, D.L. McCray, D. Yao, A.Y. Yi, A microlens array on curved substrates by 3D micro projection and reflow process, Sensors & Actuators: A Physical, 179, 242-250 (2012) [7] Y. Wu, L. Li, Y. Mao, L.J. Lee, Static microxier-coaxial electrospray synthesis of theranostic lipoplexes, ACS nano, 6(3), 2245-2252 (2012) [8] L. Li, A.Y. Yi, Design and fabrication of a freeform microlens array for a compact large-field-of-view compound-eye camera, Applied Optics, 51(2), 1843-1852 (2012) [9] P.E. Boukany, A. Morss, W.C Liao, B. Henslee, X Zhang, B. Yu, X. Wang, Y. Wu, H.C. Juang, L. Li, K. Gao, X. Hu, X. Zhao, O. Hemminger, W. Lu, G.P. Lafyatis, L.J. Lee, Nanochannel electroporation delivers precise amounts of biomolecules into living cells, Nature Nanotechnology, 6, 747-754 (2011) [10] S. Scheiding, A.Y. Yi, A. Gebhardt, L. Li, S. Risse, R. Eberhardt, A. Tünnermann, Freeform manufacturing of a microoptical lens array on a steep curved substrate by use of a voice coil fast tool servo, Optics Express, 19, 23938-23951 (2011) [11] L. Li, A.Y. Yi, Imaging 3D microstructures by freeform microoptics, Imaging & Microscopy, 2, 49 (2011) [12] L. Li, A.Y. Yi, Design and fabrication of a freeform prism array for 3D microscopy, J. Opt. Soc. Am. A, 27 (2), 2613-2620 (2010) [13] L Li, A.Y. Yi, Development of a 3D artificial compound eye, Optics Express, 18 (17), 18125-18137 (2010) [14] C. Yang, L. Li, H. Huang, J.M Castro, A.Y. Yi, Replication characterization of microribs fabricated by combining ultraprecision machining and microinjection molding, Polymer Engineering & Science, 50, 2021-2030 (2010) [15] L. Li, S.A. Collins Jr., A.Y. Yi, Optical effects of surface finish by ultraprecision single point diamond machining, Journal of Manufacturing Science and Engineering-Transactions of the ASME, 132 (2), 021002-11 (2010) [16] L. Li, L.J. Lee, J.M. Castro, A.Y. Yi, "Improving mixing efficiency of a polymer micromixer by use of a plastic shim divider," Journal of Micromechanics and Microengineering, 20, 035012 (2010) Page 2 of 5 Lei Li CV
[17] L. Li, C. Yang, H. Shi, W.C. Liao, H. Huang, L.J. Lee, J.M. Castro, A.Y. Yi, Design and fabrication of an affordable polymer micromixer for medical and biomedical applications, in press, Polymer Engineering and Science, 50 (8), 1594-1604 ( 2010) [18] L. Li, A.Y. Yi, Microfabrication on a curved surface using 3D microlens array projection, Journal of Micromechanics and Microengineering, 19, 105010 (2009) [19] C.N. Huang, L. Li, A.Y. Yi, Design and fabrication of a micro Alvarez lens array with a variable focal length, Microsystem Technologies, 15 (4), 559-563 (2009) [20] Y. Chen, L. Li, A.Y. Yi, Fabrication of precision 3D microstructures by use of a combination of ultraprecision diamond turning and reactive ion etching process, Journal of Micromechanics and Microengineering, 17 (5), 883-890 (2007) [21] D. Yao, P. Nagarajan, L. Li, A.Y. Yi, A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers, Polymer Engineering and Science, 47 (4), 530-539 (2007) [22] L. Li, A.Y. Yi, C.N. Huang, D.A. Grewell, A. Benatar, Y. Chen, Fabrication of diffractive optics by use of slow tool servo diamond turning process, Optical Engineering, 45 (11), 113401 (2006) [23] D. Yao, P. Nagarajan, L. Li, A.Y. Yi, A strategy for rapid thermal cycling of molds in thermoplastic processing, Journal of Manufacturing Science and Engineering-Transactions of the ASME, 128 (4), 837-843 (2006) [24] A.Y. Yi, L. Li, Design and fabrication of a microlens array by use of a slow tool servo, Optics Letters, 30 (30), 1707-1709 (2005) [25] L. Li, J. Lu, J.R. Chu, Z.M. Ping, Digital phase-sensitive detection based technology for the measurement of PZT film dielectric properties, Chinese Journal of Scientific Instrument, 26, 1 (2005) [26] L. Li, J.R. Chu, Z.M. Ping, Measurement of the weak signal from the piezoelectric microcantilevers, Piezoelectrics & Acoustooptics, 1, 27-30 (2003) [27] X. Yi, W.H. Huang, L. Li, Computer aided design of small module oval gears, Modern Manufacturing Engineering, 10, 13-14 (2000) CONFERENCE PROCEEDINGS [1] L. Li, Y. Wu, X. Zhao, K. Gao, P. Boukany, A.Y. Yi, L.J. Lee, Polymer nanomanufacturing of micro/nanofluidic chips for drug/gene delivery applications, 44 th CIRP Conference on Manufacturing System, Madison, WI (2011) [2] S. Scheiding, A.Y. Yi, A. Gebhardt, R. Loose, L. Li, S. Risse., R. Eberhardt, A. Tünnermann, Diamond milling or turning for the fabrication of micro lens arrays: comparing different diamond machining technologies, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics IV, SPIE (2011) [3] Y. Wu, B. Yu, L. Li, A. Jackson, W. Zha, B.E. Wyslouzil, L.J. Lee, "Formation of multifunctional nanoparticles by integrated electrospray and microfluidics for cancer imaging, diagnostics and therapy," AIChE 2009 Annual Meeting (2009) [4] L. Li, S.A. Jr. Collins, A.Y. Yi, Research on the optical effects of surface finish by diamond Page 3 of 5 Lei Li CV
machining, the 22th Annual ASPE Conference on Precision Engineering, Dallas, TX, Oct, (2007) [5] C.H. Zhang, A.Y. Yi, L. Li, L.J. Lee, R.R. Vallance, E. Marsh, Ultraprecision micromachining of microfluidic devices by use of a high-speed airbearing spindle, ASPE 2007 Summer Topical Meeting on Precision Bearings and Spindles, State College, PA, June (2007) [6] L. Li, C.N. Huang, A.Y. Yi, Fabrication of micro and diffractive optics by use of slow tool servo diamond turning process, the 20th Annual ASPE Conference on Precision Engineering, Norfolk, VA, Oct (2005) [7] A. Jain, L. Li, A.Y. Yi, F. Klocke, G. Pongs and F. Wang, A collaborative research in experimental study and numerical simulation of compression molding of precision glass optical elements, the 20th Annual ASPE Conference on Precision Engineering, Norfolk, VA, Oct (2005) PATENT - Jiaru Chu, Lei Li, Jian Lu, Ferroelectric film dielectric property full-frequency automatic measurement method, China Patent Application Number: 200310106478.4 - Jiaru Chu, Lei Li, Jian Lu, Ferroelectric film dielectric property full-frequency automatic measurement instrumentation, China Patent Application Number: 200320120097.7 INVITED TALK - Department of Industrial and Systems Engineering, University at Buffalo, Mar. 2013, Affordable micro nano manufacturing for biomedical applications. - Department of Mechanical Engineering, University of New Hampshire, Mar. 2012, Ultraprecision Micro/Nano Manufacturing and Its Innovative Applications. - Department of Mechanical Engineering, University of Akron, Sep. 2010, Ultraprecision Diamond Machining Technology and Its Applications. MANUSCRIPT REFEREEING - Advanced Materials - Optics Express - Optics Letters - Journal of Physics D: Applied Physics - Journal of Micromechanics and Microengineering - Macromolecular materials & engineering - Journal of optics - Tribology International - Robotics and Computer-Integrated Manufacturing - Machining science and technology - Proceedings of the institution of mechanical engineers, Part B, Journal of Engineering Page 4 of 5 Lei Li CV
Manufacture HONORS AND ACTIVITIES - NSEC Student Fellowship, The Ohio State University, 2004-2009 PROFESSIONAL AFFILIATIONS - Student member of American Society for Precision Engineering (ASPE) 2005-2006, 2007-2008 Page 5 of 5 Lei Li CV