MONARK GOLF MonarkGolf.com Golf Components / Custom Clubs / Golf Accessories. page 2 page 2. page 2. page 6 page 7.

MONARK GOLF Golf Components / Custom Clubs / Golf Accessories page 2 page 2 page 2 page 6 page 7 page 16 page 9 page 12 page 17 page 11 Rear MonarkGolf.com 1-877-551-4653

/Drivers Turbo Power Soar Sliding Weight Driver TW-Soar A 8-gram sliding weight is steplessly moved in a vertical manner to enhance a draw or fade bias. Slide the weight to the toe to achieve a fade bias or to the heel to achieve a distance enhancing draw bias. The CG location is moved forward and low behind the face. Moving the CG forward promotes more ball speed, high launch and less spin resulting in increased distance. 9.5º 58º 197 460 cc Square 45 10.5º 58º 197 460 cc Square 45 12º 58º 197 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 111 mm Material: Forged 6AL-4V Titanium Face Height: 58 mm Heater BMT2 Adjustable Titanium Driver TW-BMT2AD Sleeve for BMT2-AD BMT2AD-Sleeve Adjustable hosel design allows to adjust face angle: 2º Open, Neutral, 2º Closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. Moveable weights promote a neutral/straight flight or a distance enhancing draw. Choose from two ways to position the moveable weights to promote a neutral/straight flight or a distance enhancing draw. Low, forward Center of Gravity promotes high launch, fast ball speed, and low spin for increased distance. 9.5º 58º 3 460 cc Adjustable 45 10.5º 58º 3 460 cc Adjustable 45 12º 58º 3 460 cc Adjustable 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 1 mm Material: Forged 6AL-4V Titanium Face Height: 57 mm Heater BMT Cup Face Titanium Driver Right Hand: 9.5º, 10.5º, 12º Material: Forged 6AL-4V Titanium TW-BMT2NA Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Moveable weights promote a neutral/straight flight or a distance enhancing draw. The low, forward Center of Gravity promotes high launch, fast ball speed, and low spin for increased distance. 9.5º 58º 0 460 cc 1º closed 45 10.5º 58º 0 460 cc 1º closed 45 12º 58º 0 460 cc 1º closed 45 Breadth: Face Height: 1 mm 57 mm Turbo Power Swift Speed Titanium Driver TW-SWSP It s ultra-low and forward Center of Gravity promotes a faster ball speed and a lower spinrate for more distance. The streamlined head shape delivers optimal aerodynamics promoting faster swing speed for more distance. 9.5º 58º 0 460 cc Square 45 10.5º 58º 0 460 cc Square 45 12º 58º 0 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 110 mm Material: Forged 6AL-4V Titanium Face Height: 57 mm Tour Model X1 Cup Face Titanium Driver White TW-1350 Driver Black TW-1351 Cup face and deep face design (60 mm) enlarge the effective face area and sweet spot. The benefit is increased rebound effect for more distance. The expanded front-to-back dimension and added back weight are moving the CG more rearward optimizing launch angle and forgiveness. Weights are strategically placed low in the toe and heel increasing stability on miss hit shots producing a very forgiving driver. 9.5º 58º 0 460 cc Square 45 10.5º 58º 0 460 cc Square 45 12º 58º 0 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 109 mm Material: Forged 6AL-4V Titanium Face Height: 60 mm Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com 2 Drivers Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm.

Heater BMT Cup Face Titanium Driver TW-1340 Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Improved aerodynamics reduces drag over the head to promote faster clubhead speed for more distance. 8.5º 58º 0 460 cc Square 45 9.5º 58º 0 460 cc Square 45 10.5º 58º 0 460 cc Square 45 12º 58º 0 460 cc Square 45 º 58º 0 460 cc Square 45 Right Hand: 8.5º, 9.5º, 10.5º, 12º, º Breadth: 113 mm Material: Forged 6AL-4V Titanium Face Height: 57 mm /Drivers Turbo Power FBS 2.0 Titanium Driver TW-1330-RH / LH Deeper face gives golfer substantially more face area improving forgiveness on miss hits. Improved weight distribution for optimal spin and launch angle. The expanded head profile and speed-enhancing head aerodynamics promote faster clubhead speed for more distance. 9.5º 58º 197 460 cc Square 45 10.5º 58º 197 460 cc Square 45 12º 58º 197 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Left Hand: 9.5º, 10.5º, 12º Breadth: 111 mm Material: Forged 6AL-4V Titanium Face Height: 60 mm Turbo Power Aim Offset Titan Driver TW-1366 Offset hosel offers the golfer more time to square the face at impact and provides more heelbiased weighting. Offset design combined with biased center of gravity help you aim better and hit straighter, more draw-biased shots. 9.5º 58º 197 460 cc Square 45 10.5º 58º 197 460 cc Square 45 12º 58º 197 460 cc Square 45 º 58º 197 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º, º Breadth: 113 mm Material: Forged 6AL-4V Titanium Face Height: 59 mm Turbo Power X-Heat Titanium Driver TW-1360 Oversized head profile and deep face design increase forgiveness and promote accuracy and distance. Deep face design designed for golfers looking for added distance and confidence off the tee. Matte gray top plate prevents unwanted glaring and promotes easy alignment. 9.5º 57º 198 460 cc Square 45 10.5º 57º 198 460 cc Square 45 12º 57º 198 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 106 mm Material: Forged 6AL-4V Titanium Face Height: 60 mm Turbo Power Z-2.5 Titanium Driver TW-1336 Elongated head profile with added back weight positions the Center of Gravity low and far for a higher trajectory and reduced spin. The expanded face-to-back distance of 115 mm improves forgiveness and increases distance. A wider face optimizes ball speed and provide consistency across the entire hitting surface. 9.5º 57º 198 460 cc Square 45 10.5º 57º 198 460 cc Square 45 12º 57º 198 460 cc Square 45 Right Hand: 9.5º, 10.5º, 12º Breadth: 115 mm Material: Forged 6AL-4V Titanium Face Height: 56 mm Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm. Drivers 3

/Drivers Tour Model F-35 Matrix Driver WA-F35 Recessed pockets on sole reduce turf interaction. Low and back Center of Gravity promotes maximum forgiveness and high trajectory. Improved aerodynamic head profile offers more speed for more distance. Forged from 7075 aircraft grade aluminum having the same size and weight as titanium drivers but at a fraction of the costs. 10.5º 58º 0 460 cc 1º closed 45 12º 58º 0 460 cc 1º closed 45 Right Hand: 10.5º, 12º Material: Forged 7075 Alloy Breadth: Face Height: 112 mm 58 mm Tour Model Heater 3.0 Matrix Driver WA-1129 Expanded face to rear dimension (119mm) promotes an extreme perimeter weight distribution and increases resistance to twisting off-center hits. The enlarged sweet spot makes this driver a great choice for the average to high handicap golfer looking for added distance off the tee. Oversized driver is a durable four-piece construction of hot forged 7075 alloy. 10.5º 58º 0 460 cc 1º closed 45 12º 58º 0 460 cc 1º closed 45 Right Hand: 10.5º, 12º Material: Forged 7075 Alloy Breadth: Face Height: 119 mm 58 mm /Fairway Woods Heater BMT2 Fairway Wood W-BMT2FW The Center of Gravity is moved further forward producing less spin, a higher launch and faster swing speed. Shallow face promote an easy launch and improve playability. Wood Loft Lie Weight Volume Std. Length #3+ 13º 59º 210 185 cc 43 #3 15º 59º 210 185 cc 43 #5 19º 60º 2 175 cc 42 #7 22º 60.5º 225 170 cc 41 #9 25º 61º 230 170 cc 40.5 Right Hand: #3+, #3, #5, #7, #9 Material: 17-4 Stainless Steel Face Height: 37 mm (#3) Breadth: 83 mm (#3) Face Angle: Square Turbo Power Swift Speed Fairway Wood W-SWSPFW The streamlined head shape delivers optimal aerodynamics promoting faster swing speed for more distance. The Center of Gravity is moved further low and forward, creating a low spin and high launch to get the ball easily airborne. The lower head profile promotes a faster ball speed and a lower spin-rate for more distance. Wood Loft Lie Weight Volume Std. Length #3 15º 58º 210 g 190 cc. 43 #5 18º 58.5º 2 g 185 cc. 42 #7 21º 59º 225 g 180 cc. 41 Right Hand: #3, #5, #7 Face Height: 37 mm (#3) Material: 17-4 Stainless Steel Breadth: 77 mm (#3) Face Angle: Square Tour Model X1 Fairway Wood W-X1FW The expanded head profile promotes faster clubhead speed for more distance. The expanded front-to-back dimension and added back weight are moving the CG more rearward optimizing the launch angle and forgiveness. Wood Loft Lie Weight Volume Std. Length #3 15º 59º 210 185 cc 43 #5 18º 60º 2 175 cc 42 #7 21º 60.5º 225 170 cc 41 #9 24º 61º 230 170 cc 40.5 Right Hand: #3, #5, #7, #9 Material: 17-4 Stainless Steel Face Height: 36.5 mm (#3) Breadth: 83 mm (#3) Face Angle: Square Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com 4 Drivers / Fairway Woods Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm.

Heater BMT Fairway Wood W-1340 Improved design of recessed pockets on sole along clubface promote faster ball speed and more distance. Lower and more-forward CG location offers faster ball speed, high launch and low spin. Lower head profile increases playability and optimizes launch angle. Wood Loft Lie Weight Volume Std. Length #3+ 13º 59º 210 180 cc 43 #3 15º 59º 210 180 cc 43 #4 16.5º 59.5º 215 170 cc 42.5 #5 18º 59.5º 215 170 cc 42 #7 21º 60º 2 160 cc 41 Right Hand: #3+, #3, #4, #5, #7 Material: 17-4 Stainless Steel Face Height: 35.5 mm (#3) Breadth: 83 mm (#3) Face Angle: Square /Fairway Woods Turbo Power FBS 2.0 Fairway Wood Right/Left: #3, #5, #7 Material: 17-4 Stainless Steel Face Height: 40 mm (#3) Breadth: 83 mm (#3) Face Angle: Square W-1330-RH / LH The recessed slot on sole along the face promote higher launch for more distance. CG location is moved lower and more forward for high launch and low spin. Lower head profile for increased playability and easier launch. Wood Loft Lie Weight Volume Std. Length #3 15º 58º 210 g 190 cc. 43 #5 18º 58.5º 2 g 185 cc. 42 #7 21º 59º 225 g 180 cc. 41 Turbo Power Aim Offset Fairway Wood W-1366 Offset design offers the golfer more time to square the face at impact and provides more heel-biased weighting. Face angle is square at address. Sole plate design allows the golfer to slightly open and close the driver as needed at address. Offset design combined with biased center of gravity help you aim better and hit straighter, more draw-biased shots. Wood Loft Lie Weight Volume Std. Length #3 15º 58º 210 180 cc 43 #5 18º 58.5º 2 175 cc 42 #7 21º 59º 225 170 cc 41 Right Hand: #3, #5, #7 Material: 17-4 Stainless Steel Face Height: 39 mm (#3) Breadth: 77 mm (#3) Face Angle: Square Turbo Power X-Heat Fairway Wood W-1360 Designed with a lower CG to reduce spin and an updated soleplate design, these new fairway woods provide increased distance and versatility from the tee, fairway or rough. Matte gray top plate prevents unwanted glaring and promote easy alignment. Wood Loft Lie Weight Volume Std. Length #3 15º 56º 210 190 cc 43 #5 18º 57º 2 185 cc 42 #7 21º 58º 225 180 cc 41 Right Hand: #3, #5, #7 Material: 17-4 Stainless Steel Face Height: 36 mm (#3) Breadth: 82 mm (#3) Face Angle: Square Turbo Power Z-2.5 Fairway Wood W-1336 Rear weighted sole increases MOI. Mass low in the clubhead positions the CG low and back for higher launch and increased forgiveness. Slightly larger head design with a traditional shape that is easy to align with the target. Wood Loft Lie Weight Volume Std. Length #3 15.5º 58º 210 185 cc 43 #5 18.5º 58.5º 2 180 cc 42 #7 21.5º 59º 225 175 cc 41 Right Hand: #3, #5, #7 Material: 17-4 Stainless Steel Face Height: 38 mm (#3) Breadth: 80 mm (#3) Face Angle: Square Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm. Fairway Woods 5

/Hybrids Heater BMT2 Hybrid IW-BMT2HY Center of Gravity is moved lower and more forward promoting a higher launch and lower spin for more distance. Low head profile promote an easy launch and improved playability with sustained speed off the face. Hybrid #2 #3 #4 #5 #6 #7 #8 #9 PW SW Loft 15º 18º 21º 24º 27º 30º 34º 38º 42º 45º Lie 60º 60.5º 61º 61.5º 62º 62.5º 63º 63.5º 64º 64º Weight 216 221 226 232 238 244 250 257 264 268 Volume (cc) 5 5 0 0 135 135 130 130 125 125 Std. Length 40.5 40 39.5 39 38.5 38 37.5 37 36.5 36 Right Hand: 15º - 45º Hosel Bore: 0.370" Material: 431 Stainless Steel Breadth: 68 mm (21º) Face Height: 36 mm (21º) Turbo Power Swift Speed Hybrid IW-SWSPHY The new low-and-forward Center of Gravity promotes optimal low-spin / high launch conditions. Its low-profile head design with shallow face offers an easy and high launch for great playability. Hybrid #2 #3 #4 #5 Right Hand: 17º, 19º, 22º, 25º Loft 17º 19º 22º 25º Material: 431 Stainless Steel Lie 60º 60.5º 61º 61.5º Hosel Bore: 0.370" Weight 231 238 245 252 Face Height: 36 mm (22º) Volume 5cc 0cc 136cc 132cc Breadth: 65 mm (22º) Std. Length 40.5 40 39.5 39 Tour Model X1 Hybrid IW-X1HY The expanded head profile promotes faster clubhead speed for more distance. The expanded front-to-back dimension and added back weight are moving the CG more rearward optimizing the launch angle and forgiveness. Hybrid #2 #3 #4 #5 Right Hand: 15º, 18º, 21º, 24º Loft 15º 18º 21º 24º Material: 431 Stainless Steel Lie 60º 60.5º 61º 61.5º Hosel Bore: 0.370" Weight 216 221 226 232 Face Height: 36.5 mm (21º) Volume 5cc 5cc 0cc 0cc Breadth: 67.5 mm (21º) Std. Length 40.5 40 39.5 39 Heater BMT Hybrid W-1341 Shallower face and lower head profile for increased playability and higher launch angle. Improved recessed pocket design flexes faster to promote faster ball speed and more distance. Lower and more-forward CG location promotes faster ball speed, high launch and low spin. Hybrid #2 #3 #4 #5 #6 #7 #8 #9 PW SW Loft 15º 18º 21º 24º 27º 30º 34º 38º 42º 45º Lie 60º 60.5º 61º 61.5º 62º 62.5º 63º 63.5º 64º 64º Weight 216 221 226 232 238 244 250 256 262 268 Volume (cc) 5 0 135 135 130 130 125 125 1 1 Std. Length 40.5 40 39.5 39 38.5 38 37.5 37 36.5 36 Right Hand: 15º - 45º Hosel Bore: 0.370" Material: 17-4 stainless Steel Breadth: 68.5 mm (21º) Face Height: 35 mm (21º) Turbo Power FBS 2.0 Hybrid Center of Gravity is moved lower and more forward promoting a faster ball speed, higher launch, and lower spin. The recessed slot on sole along the face promotes a higher launch for more distance. Hybrid #2 #3 #4 #5 Loft 17º 19º 22º 25º Lie 60º 60.5º 61º 61.5º Weight 231 238 245 252 Volume 5cc 0cc 136cc 132cc Std. Length 40.5 40 39.5 39 W-1331 RH / LH Right/Left: 17º, 19º, 22º, 25º Material: 431 Stainless Steel Hosel Bore: 0.370" Face Height: 40 mm (22º) Breadth: 72 mm (22º) Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com 6 Hybrids Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm.

Heater 4.0 White Hybrid W-1135-RH / LH The latest hybrid design promotes more control, higher ball flight and an improved sound and feel. The Low-Friction sole promotes a clean and square contact shot after shot. The result is consistent and more accurate shots from any lie. 10 lofts in RH from 15º to 45º and 6 lofts in LH from 15º to 30º to fit any golfer. Hybrid #2 #3 #4 #5 #6 #7 #8 #9 PW SW Loft 15º 18º 21º 24º 27º 30º 34º 38º 42º 45º Lie 60º 60.5º 61º 61.5º 62º 62.5º 63º 63.5º 64º 64º Weight 216 221 226 232 238 244 250 256 262 268 Volume (cc) 125 125 125 125 1 1 115 115 110 110 Std. Length 40.5 40 39.5 39 38.5 38 37.5 37 36.5 36 Right Hand: 15º - 45º Hosel Bore: 0.370" Left Hand: 15º - 30º Material: 17-4 stainless Steel Face Height: 35 mm (21º) Breadth: 60 mm (21º) /Hybrids Turbo Power X-Heat Hybrid W-1361 The CG location and loft combine the distance and forgiveness of a fairway wood with the accuracy of a long iron to provide strong trajectories and more dynamic shot-shaping. The updated soleplate is designed for enhanced playability and powerful distance from any lie. Hybrid #2 #3 #4 #5 Right Hand: 17º, 19º, 22º, 25º Loft 17º 19º 22º 25º Material: 431 Stainless Steel Lie 57º 57.5º 58º 58.5º Hosel Bore: 0.370" Weight 235 241 247 253 Face Height: 34 mm (22º) Volume (cc) 130 126 122 117 Breadth: 58 mm (22º) Std. Length 40.75 40.25 39.75 39.25 Turbo Power Z-2.5 Hybrid W-1348 The traditional yet game improvement shape is slightly larger, making it more forgiving on mis-hits. Rear sole weighting optimizes the CG location and increases the MOI. The result are optimal launch condition and playability from all types of lies, rough and sand. Hybrid #2 #3 #4 #5 Right Hand: 17º, 19º, 22º, 25º Loft 17º º 23º 27º Material: 431 Stainless Steel Lie 59º 60º 60.5º 61º Hosel Bore: 0.370" Weight 233 238 245 250 Face Height: 33 mm (23º) Std. Length 40.5 40 39.5 39 Breadth: 58 mm (23º) Heater BMT2 I-BMT2 New lower Center of Gravity make it easier to launch for a high, strong, penetrating flight. As CG moves lower on the ball, it promotes a higher ball launch. The Tour-inspired, Tour-shaped wedges feature blade-style construction for a great feel and allow for improved versatility from all lies. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). Loft Lie Weight Offset Bounce Length Turbo Power Swift Speed I-SWSP Redesigned irons are progressively shaped throughout the set. The long irons feature a bigger topline to inspire confidence at address. The slender topline and sole in the short irons promote better workability, feel and control. Center of Gravity location is moved further low to easily launch on a high and strong flight. Wedges: Blade design with thin top line. Relocated weight moves the CG lower on the ball promoting higher launching shots. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). Loft Lie Weight Offset Bounce Length 3 4 5 6 7 8 9 PW AW SW LW 17º º 23º 26.5º 30.5º 34.5º 39.5º 45º 50º 55º 60º 60.25º 61º 61.75º 62.5º 63º 63.5º 64º 64.5º 64.5º 64.5º 64.5º 243 252 259 266 272 280 287 297 301 305 305 6.3 5.8 5.2 4.5 3.9 3.1 2.5 2 1.3 0.9 0.9 0.5 1.3 3.2 4.1 4.9 5.6 6 7 8.4 11.5 11.5 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Set #5-PW, #3, #4, AW, SW, LW Hosel Bore: 0.370" 431 stainless Finish: Mirror Polish Sole Width: 25 mm (#5) Right Hand: Material: Toe Height: 56 mm (#5) 3 4 5 6 7 8 9 PW AW SW LW 18º º 23º 26.5º 30.5º 35º 40º 45º 50º 55º 60º 61º 61.5º 62º 62.5º 63º 63.5º 64º 64.5º 64.5º 64.5º 64.5º 245 252 259 266 272 280 287 297 301 305 305 6 6 5.7 4.8 4.2 3.4 2.7 2 1.4 1 1 1 1 3 4 5 5.5 6 7 8.5 11.6 11.6 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Set #5-PW, #3, #4, AW, SW, LW Hosel Bore: 0.370" 431 stainless Finish: Satin Sole Width: 26 mm (#5) Right Hand: Material: Toe Height: 56 mm (#5) /s Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm. Hybrids / s 7

/s Heater BMT I-1340 Deep cavity back design with thin top line, narrow sole and slightly oversized face feature a lower center of gravity for high launching shots. #3 to PW: Deep cavity back design for increased forgiveness and higher launch angle. Wedges: Blade design promotes workability and delivers ball control and predicable trajectory. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). 3 4 5 6 7 8 9 PW AW SW LW Loft 19º 21º 24º 27º 31º 35º 40º 45º 50º 55º 60º Lie 60.25º 61º 61.75º 62.5º 63º 63.5º 64º 64.5º 64.5º 64.5º 64.5º Weight 245 252 259 266 272 280 287 297 301 305 305 Offset 6.5 6.1 5.7 5.3 4.6 3.7 2.8 2 1.5 1 1 Bounce 0 0 1 2 4 5 6 10 11 12 12 Length 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Right Hand: Set #5-PW, #3, #4, AW, SW, LW Finish: Mirror Polish Material: 431 stainless Toe Height: 56 mm (#5) Hosel Bore: 0.370" Sole Width: 21 mm (#5) Heater BMT Tour I-1342 The reduced offset and thinner sole allow the golfer to shape the ball. Lower lofts and thinner top line provide pro performance with the distance, feel and workability that better players demand. Weight was relocated low for a low CG to promote high launching shots. Wedges are cavity back design. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). 3 4 5 6 7 8 9 PW AW SW LW Loft 18º 21º 24º 27º 31º 35º 39º 43º 48º 53º 58º Lie 60.5º 61º 61.5º 62º 62.5º 63º 64º 65º 65º 65º 65º Weight 245 252 259 266 272 280 287 297 301 305 305 Offset 3.5 3.3 3 2.8 2.5 2.3 2 1.8 1.8 1.8 1 Bounce 0 0 1 2 4 5 6 10 11 12 12 Length 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Right Hand: Set #5-PW, #3, #4, AW, SW, LW Finish: Mirror Polish Material: 431 stainless Toe Height: 55 mm (#5) Hosel Bore: 0.370" Sole Width: 21 mm (#5) Turbo Power FBS 2.0 I-1330-RH / LH Enlarged cavity in a compact head profile and a thin top line relocate the CG lower. The benefit is a higher launch angle and higher peak trajectory. #3 to PW: Deep cavity with undercut channel design promote increased forgiveness and stability. AW, SW, LW: Blade design with thin top line and undercut channel substantially lower CG location promoting higher launching shots. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). Loft Lie Weight Offset Bounce Length Right / Left: 3 4 5 6 7 8 9 PW AW SW LW 18º º 23º 26.5º 30.5º 35º 40º 45º 50º 55º 60º 61º 61.5º 62º 62.5º 63º 63.5º 64º 64.5º 64.5º 64.5º 64.5º 245 252 259 266 272 280 287 297 301 305 305 6 6 5.7 4.8 4.2 3.4 2.7 2 1 1.4 1 1 1 3 4 5 5.5 6 7 11.5 8.5 11.5 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Set #5-PW, #3, #4, AW, SW, LW Finish: Material: 431 stainless Hosel Bore: 0.370" Satin Toe Height: 55 mm (#5) Sole Width: 23 mm (#5) Turbo Power FBS I-1230 #4 and #5 irons: Two-piece metalwood-inspired construction promotes a low Center of Gravity and high MOI. The CG is located deep behind the face for a more solid feel on impact and greater consistency. Mid and short irons feature a deep undercut cavity design. The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots. The new FBS irons are engineered for extreme distance and pinpoint accuracy. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). 4 5 6 7 8 9 PW AW SW LW Loft º 23º 26º 30º 34º 39º 44º 49º 54º 59º Lie 61º 61.5º 62º 62.5º 63º 63.5º 64º 64º 64º 64º Weight 252 259 266 273 280 287 294 300 303 303 Offset 6.1 5.7 5.7 5 4.3 3.7 3.1 3.1 2 2 Length 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Right Hand: Set #6-PW, #4, #5, AW, SW, LW Hosel Bore: 0.370" Finish: Black Toe Height: 58 mm (#5) Sole Width: 31 mm (#5) 8 s Turbo Power X-Heat I-1360 The X-Heat s feature a lower, deeper center of gravity and a consistently hot face for distance and accuracy. The deeper cavity is designed for higher ball speeds over a bigger part of the face for more distance and accuracy. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). 3 4 5 6 7 8 9 PW AW SW LW Loft º 23º 26º 29º 33º 37º 41º 45º 50º 55º 60º Lie 60º 60.5º 61º 62º 62.5º 63.5º 64.5º 65º 65º 65º 65º Weight 244 251 258 265 272 279 286 293 296 303 303 Offset 5 5 4 4 3.5 3 3 2 2 2 2 Length 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Right Hand: Set #5-PW, #3, #4, AW, SW, LW Finish: Material: 431 stainless Hosel Bore: 0.370" Mirror Polish Toe Height: 56 mm (#5) Sole Width: 26 mm (#5)

Turbo Power Z-2.5 I-1336 Deep cavity design moves mass down and increase MOI for extreme forgiveness. In the longer irons, sole widths and offset are slightly larger to help launch the ball high with distance. Support bars at heel and toe stabilize the face at impact to deliver optimal ball velocity and distance with control. 3 4 5 6 7 8 9 PW UW SW LW Loft º 23º 26º 29º 32º 36º 40º 45º 50º 54º 58º Lie 59.5º 60º 60.5º 61º 62º 63º 63.5º 64º 64º 64º 64º Weight 242 249 256 263 271 278 285 292 297 303 302 Bounce -2 0 2 4 6 8 9 10 11 12 12 Length 39 38.5 38 37.5 37 36.5 36 35.5 35.5 35.5 35.5 Right Hand: Set #5-PW, #3, #4, UW, SW, LW Finish: Shot Peen Material: 431 stainless Toe Height: 52 mm (#5) Hosel Bore: 0.370" Sole Width: 26 mm (#5) /s Professional Open Wedge I-128-RH / -LH The Professional Open wedge series features a unique beveled sole combined with a tour proven shape and bounce design to provide accurate play from any lie. In a classic satin finish, this wedge includes the hard-to-find 68º loft with 0º bounce... now you can finally play the flop shot Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). Wedge Loft AW 52º SW 56º LW 60º HL 64º Flop 68º Right Hand: Left Hand: 52º, 56º, 60º, 64º, 68º 52º, 56º, 60º, 64º Lie 64º 64º 64º 64º 64º Material: 431 Stainless Weight 291 298 305 312 312 Finish: Satin Bounce 10º 16º 12º 5º 0º Hosel Bore: 0.370" Club Length 35.5 35.5 35.25 35.25 35.25 Sole Width: mm (56º) /Wedges Integra Soft Cast Wedge I-1051-RH / -LH Precision cast from soft 18-8 Stainless Steel and carefully finished in classic High Polish. Proven shape and bounce design provide accurate play from any lie. Custom-Built with Apollo Stepped Steel & Rexton Red Line Velvet (#RE-74). Wedge Loft AW 52º SW 56º LW 60º Right Hand: Left Hand: 52º, 56º, 60º, 64º 52º, 56º, 60º, 64º Lie 64º 64º 64º Material: 188 Stainless Steel Weight 302 302 302 Finish: Mirror Polish Bounce 5º 12º 3º Hosel Bore: 0.370" Club Length 35.5 35.5 35.25 Sole Width: 23 mm (56º) T-7 Twin Engine White Mallet SP-1223 Black Mallet SP-1224 The enlarged mallet profile profile promotes a high MOI for tremendous stability and forgiveness even on off-center hits. The black, easy-to-see alignment lines make it easy to aim. Milled Insert Face reduces skidding and promotes truer roll. Custom-Built with Apollo triple-bend shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Width Material Shaft Length 3º 90º 340 g 85 mm 25 mm 87 mm 431 S/Steel Triple-bend 35 /Steel Putters Turbo Power Specter White Mallet SP-12-RH / -LH The Specter makes it easy to square the face at impact and delivers tremendous twist-resistance on the backswing and off-center hits. Black lines in center on white frame promote focus, accurate aim and stroke awareness. Custom-Built with Apollo double-bend shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Width Material Shaft Length 3º 72º 380 g 107 mm 26 mm 96 mm 431 S/Steel Double-bend 35 Turbo Power Specter Belly Putter SP-1215-RH / -LH Heavier version with 450 gm weight to build popular belly putters. Loft Lie Weight Blade Length Blade Height Width Material Shaft 3º 72º 450 g 107 mm 26 mm 96 mm 431 S/Steel Straight P-16 High MOI Mallet Putter SP-P16 Symmetrical shape with extended weight bars promote an extreme perimeter weight distribution. The perimeter weighting promotes a high MOI for reduced twisting and improved stability and forgiveness even on off-center hits. The black alignment line on white background promotes easy face-target alignment. Milled face with aluminum insert reduces skidding and promotes truer roll. Custom Built with Apollo triple-bend steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Width Material Shaft Length 2º 90º 350 g 92 mm 23 mm 89 mm 431 S/Steel Triple-bend 35 Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm. s / Wedges / Putters 9

/Steel Putters Armada Mallet Putter Red/Gray SP-1011 Black Circles SP-1012 White Circles SP-1013 Enlarged mallet head with weighted wings moves the CG drastically behind the face and towards the perimeter of the head The extended perimeter weight distribution promotes a high MOI to reduce twisting. The 3-ball design makes face-ball-target alignment easier. CNC milled face with polymer insert for truer roll. Custom-Built with Apollo double-bend shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Width Material Shaft Length 3º 72º 360 g 66.5 mm 26 mm 94 mm 431 S/Steel Double-bend 35 Heater 3.0 White Blade SP-1134-RH Optimal weight distribution in the heel and toe. Milled aluminum insert face to ensure a perfectly flat striking surface and reduces skidding for truer roll. Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Width Material Shaft Length 3º 72º 330 g 104 mm 25 mm 25 mm 431 S/Steel Straight 35 Heater 3.0 Belly Blade Putter SP-1234-RH 450 gram head weight specially designed to build popular belly putters. Loft Lie Weight Blade Length Blade Height Width Material Shaft 4º 73º 450 g 124 mm 29 mm 33 mm 431 S/Steel Straight /Value Putters /Value Chippers 2-Ball Mallet Zinc Putter ZP-964-RH Blade putter with extended mallet design. White painted balls for alignment. Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Material Shaft Length 3.5º 72º 365 g 106 mm 25 mm Zinc Straight 35 Ring Mallet Zinc Putter ZP-993-RH Ring mallet design to reduce twisting on off-center hits. White alignment lines make the faceball alignment easy. Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Material Shaft Length 3.5º 72º 365 g 92 mm 25 mm Zinc Straight 35 Dual Wing Mallet Zinc Putter ZP-1161-RH / -LH Modified mallet with weighted alignment wings promote a higher M.O.I and increase stability. The rearwards dual struts also serve as alignment system to make the face-ball alignment easy. Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Material Shaft Length 3.5º 72º 365 g 91 mm 23 mm Zinc Straight 35 Blade Black Zinc Putter ZP-1110-RH / -LH Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Material Shaft Length 3.5º 74º 295 g 103 mm 24 mm Zinc Straight 35 Two-Way Zinc Chipper ZC-1069 The Two-Way Chipper has a double-sided face to get you out of the most difficult situations. Custom Built with Apollo stepped steel shaft and Pro White Pistol putter grip (#RE-69). Loft Lie Weight Blade Length Blade Height Material Shaft Length 36º 68º 3 g 97 mm 26 mm Zinc Straight 35 Custom Built Clubs built with hundreds of different shafts & grips online at www.monarkgolf.com 10 Putters / Chippers Tolerance: Loft, lie, face angle: +/- 1 ; weight: +/- 3 gm.

New Shafts Item # Tour Blue 65 Tour Blue 65 Tour Blue 65 Tour Blue 65 Tour Blue 75 Tour Blue 75 Tour Blue 75 Tour Blue 75 Tour Green 65 Tour Green 65 Tour Green 65 Tour Green 65 Tour Green 65 Tour Green 75 Tour Green 75 Tour Green 75 Tour Green 75 Tour Green 75 Item PVx Tour 6.0 PVx Tour 6.5 PVx Tour 7.0 Item Boost Boost Boost SK Fiber Wraith GSK-WRAITH45 Ultra-lightweight shaft weighing in at just 50 grams. For players with a slow to moderate tempo seeking a higher launch angle. Custom clubmakers will love the extended raw length and especially the extended parallel tip section (5.5") that will allow for customized tip trimming. Guaranteed +/- 1 cpm consistency around circumference of the shaft. Item Shaft Flex Torque Tip Butt Length Weight Ball Flight Wraith Wood A 5.2.335.605 47" 54 g High Wraith Wood R 5.2.335.605 47" 55 g High Wraith Wood S 5.2.335.605 47" 55 g Mid-High Aldila Tour Blue GA-TB Tour Green GA-TG The constant taper shaft profile provides exceptional feel and a smooth, controlled release. The Tour Green is made with the latest generation of Aldila's Micro Laminate materials (MLT ). The ultra thin, ultra strong material allows for the construction of a shaft with outstanding performance and unparalleled consistency. The Tour Blue features low-mid ball flight while Tour Green promotes a mid ball flight. Shaft Flex Torque Tip Butt Length Weight Ball Flight Wood R 4.2.335.640 46" 68 g Mid Wood S 3.7.335.642 46" 69 g Mid Wood X 3.2.335.646 46" 71 g Mid Wood Tour X 2.7.335.642 46" 69 g Mid Wood R 3.9.335.640 46" 74 g Mid Wood S 3.5.335.640 46" 76 g Mid Wood X 2.9.335.642 46" 76 g Mid Wood Tour X 2.5.335.642 46" 76 g Mid Wood R 4.5.335.636 46" 66 g Low-Mid Wood S 3.9.335.635 46" 67 g Low-Mid Wood Tour S 3.5.335.641 46" 67 g Low-Mid Wood X 3.5.335.641 46" 69 g Low-Mid Wood Tour X 3.3.335.640 46" 69 g Low-Mid Wood R 4.3.335.632 46" 72 g Low-Mid Wood S 3.7.335.632 46" 74 g Low-Mid Wood Tour S 3.3.335.641 46" 76 g Low-Mid Wood X 3.3.335.637 46" 75 g Low-Mid Wood Tour X 2.8.335.640 46" 75 g Low-Mid Project-X PVx Tour UPXV70 The PXV Tour shaft incorporates the PXv technology into a heavier weight shaft. It is the perfect complementing fairway wood design to PXv Tour 52 and also a great option for players seeking a slightly heavier weight driver shaft. Shaft Flex Torque Tip Butt Length Weight Ball Flight Wood S+ 3.5.335.600 46" 65 g Low-Mid Wood X 3.5.335.600 46" 75 g Low Wood X+ 3.5.335.600 46" 77 g Low Graffalloy Boost GR-BOOST VLT Technology (Vertical Launch Tip) propels the ball at extreme peak trajectory. Lean shaft profile reduces shaft aerodynamic drag by 15% promoting a higher swing speed. Micro-Mesh tip section maintains critical tip stability even with the high torque values inherent in thin diameter designs. Shaft Flex Torque Tip Butt Length Weight Ball Flight Wood A 5.5.335.610 46" 57 g High Wood R 5.5.335.610 46" 58 g High Wood S 5.5.335.610 46" 59 g High Graphite Design G-Series Silver D-GSS70 The new G-Series Silver shaft with X Directtional Technology (XDT) is the 2nd generation of the G-Series wood shaft line. The new G-Series Silver wood shafts were designed with a stiffer tip section and offer lower launch and lower ball spin characteristics than the original G-Series Red models. Item Shaft Flex Torque Tip Butt Length Weight Ball Flight Silver 60 Wood R 3.3.335.602 46" 64 g Low-Mid Silver 60 Wood S 3.3.335.604 46" 66 g Low-Mid Silver 60 Wood X 3.3.335.606 46" 68 g Low-Mid Silver 70 Wood S 3.1.335.606 46" 74 g Low-Mid Silver 70 Wood X 3.1.335.608 46" 76 g Low-Mid Graphite Design G-Series GD-GSIR The new G Series shaft with X Directional Technology (XDT) is the next generation of premium Graphite Design shafts and is designed to be very adaptable to today's vast iron head technology. The G Series shafts performance characteristics favor a mid launch trajectory and low/mid ball spin. Item Shaft Flex Torque Tip Butt Length Weight Ball Flight G Series 73 A 3.9.370.591 40" 69 g Mid G Series 73 R 3.9.370.593 40" 71 g Mid G Series 73 S 3.9.370.595 40" 72.5 g Mid G Series 83 R 3.7.370.600 40" 80 g Mid G Series 83 S 3.7.370.602 40" 81.5 g Mid G Series 83 X 3.7.370.604 40" 83 g Mid G Series 93 S 3.4.370.608 40" 91 g Mid G Series 93 X 3.4.370.610 40" 92.5 g Mid UST Elements Wind GU-WIND Elements Fire GU-FIRE UST Mamiya s advanced research lab has uncovered new data that proves Mid-Flex Stability is the most important feature in the golf shaft for spin and launch. The research to isolate the benefits of Mid-Flex Stability has led to the design and extension of the mid-section profile to enhance performance, reduce dispersion and increase ball speed. The result is longer, straighter and more accurate shots! Elements WIND is designed with a mid-stiffness area which creates a truly dynamic kick for higher launch and great spin control for maximum carry and roll. Elements FIRE is designed with an extremely stable and reinforced mid-section for a mid-launch and spin for a penetrating ball flight. Wind 50 Wood R 5.7.335.610 46" 57 g Mid-High Wind 50 Wood S 5.4.335.615 46" 59 g Mid-High Wind 60 Wood R 3.4.335.605 46" 66 g Mid-High Wind 60 Wood S 3.4.335.605 46" 68 g Mid-High Wind 60 Wood X 3.4.335.610 46" 70 g Mid-High Wind 70 Wood R 2.8.335.600 46" 75 g Mid-High Wind 70 Wood S 2.8.335.600 46" 76 g Mid-High Wind 70 Wood X 2.8.335.605 46" 78 g Mid-High Wind 80 Wood S 2.9.335.605 46" 86 g Mid-High Wind 80 Wood X 2.9.335.610 46" 88 g Mid-High Fire 50 Wood R 5.0.335.605 46" 58 g Mid Fire 50 Wood S 4.8.335.610 46" 59 g Mid Fire 60 Wood R 3.4.335.615 46" 67 g Mid Fire 60 Wood S 3.4.335.615 46" 69g Mid Fire 60 Wood X 3.4.335.6 46" 71 g Mid Fire 70 Wood R 3.0.335.615 46" 75 g Mid Fire 70 Wood S 3.0.335.615 46" 76 g Mid Fire 70 Wood X 3.0.335.6 46" 78 g Mid Fire 80 Wood S 2.7.335.610 46" 86 g Mid Fire 80 Wood X 2.7.335.615 46" 88 g Mid UST Recoil GU-RC5 Recoil technology allows the golfer to load and unload better on partial and full shots for improved distance and trajectory control. The Recoil shaft also increases the spring effect in the walls of the shaft for efficient energy transferred to the ball for increased velocity and greater distance. The unique composite construction creates a higher damping rate equating to better feel. Recoil 650 L 3.7.370.600 41" 67 g High UST ProForce V5 GU-V5 The firm tip section produces a mid-trajectory while the use of superior materials and design produces a very stable and consistent golf shaft. ProForce V5 is for the player seeking a flatter, more penetrating ball flight. The firm tip section produces a medium launch condition and increased ball flight. PF V5-65 Wood R 3.8.335.599 46" 64 g Mid PF V5-65 Wood S 3.8.335.600 46" 65 g Mid PF V5-65 Wood X 3.8.335.600 46" 65 g Mid PF V5-75 Wood S 3.0.335.603 46" 74 g Mid PF V5-75 Wood X 3.0.335.604 46" 75 g Mid UST 55 Gold GU-55GOLD The UST 55 GOLD is a new light weight shaft designed quite simply - to hit the ball farther with greater accuracy. The very same, advanced, high modulus carbon fiber materials used in the original Proforce models are used in the 65 GOLD. 55 Gold Wood A 4.5.335.610 46" 49 g Mid 55 Gold Wood R 4.5.335.612 46" 50 g Mid 55 Gold Wood S 4.5.335.612 46" 53 g Mid UST drvr Wood GU-DRVR hyb Hybrid GU-HYB irn GU-IRN The "dhi" series has been produced as a low cost series of woods, hybrids and irons. This series has been designed to be one of the best values in golf. drvr Wood L 5.8.335.591 45" 60 g High drvr Wood A 5.9.335.595 46" 63 g High drvr Wood R 6.2.335.600 46" 67 g Mid-High drvr Wood S 6.1.335.602 46" 70 g Mid-High yhb Hybrid L 4.5.370.578 46" 54 g High yhb Hybrid A 4.4.370.596 46" 67 g High yhb Hybrid R 4.3.370.600 46" 70 g Mid-High yhb Hybrid S 4.2.370.600 46" 73 g Mid-High irn L 4.3.370.575 39" 67 g High irn A 3.7.370.590 39" 73 g High irn R 3.7.370.598 39" 75 g Mid-High irn S 3.7.370.598 39" 75 g Mid-High Graman GMAXXX GRAM-XXX The new GMAXXX is specifically designed for senior golfers with a smooth tempo, seeking maximum club head speed at impact for the absolute longest distance, while combining accuracy and control. Manufactured with the highest strain graphite fibers produced by Mitsubishi Rayon of Japan. Constructed with multiple high modulus, high strain micro plies for unmatched consistency, responsiveness and feel with ultra-low spin rate. 48" raw length for total customization. Item Shaft Flex Torque Tip Butt Length Weight Ball Flight GMAXXX GMAXXX Wood Wood A/L R/S 4.3 4.3.335.335.590.600 48" 48" 49 g 52 g High High New Shafts 11

New Grips Winn Grips 6TCH-BBW The Winn DuraTech grip is a multi-material hybrid grip, the first ever combining polymer and rubber in strategic locations of the grip. New for in midsize. DuraTech Hybrid Midsize (+1/16 ) Blue/White, 0.600 round, 54 g Tour Velvet Super Tack: New innovative material formulation provides exceptional level of tackiness. New texture pattern provides a higher level of traction. VSTS Tour Velvet Super Tack Standard, 0.600 round, 49.5 g VSTM Tour Velvet Super Tack Midsize, 0.600 round, 57 g Winn DryTac: Soft, cushioned feel with exceptional shock absorption for comfortable playability. New in Navy Blue. 5DT-NB DriTac Standard Navy Blue, 0.600 round, 48 g 6DT-NB DriTac Midsize (+1/16 ) Navy Blue, 0.600 round, 49 g 7DT-NB DriTac Oversize (+1/8 ) Navy Blue, 0.600 round, 50 g The new WinnPro X putter grips use a less tapered profile than traditional designs to eliminate wrist movement during putting while still delivering that comfortable, tacky feel you ve come to expect from Winn. Extended non-tapered profile eliminates wrist movement during the stroke. Uses comfortable, tacky Excel polymer and staggered tread pattern for ultimate feel. Comes in 3 different sizes, 4 colors per size. WPX18-BKR Pro X 1.18 Black/Red WPX18-BLO Pro X 1.18 Blue/Orange Z-Grip Cord: Full cord grip features aggressive textural design for ultimate feedback and control. GRMC Z-Grip Cord Midsize, 0.600 round, 57.5 g Lamkin Grips Lamkin UTx: Revolutionary tri-layer grip takes all-weather performance and great-feeling playability to a new extreme: Tacky and softer ACE 3GEN foundation. Moisture-wicking fabric weave. Firmer ACE 3GEN top layer for exception torsion control. 1011 UTx Standard Black, 0.580 round, 52 g 10 UTx Midsize Black, 0.580 round, 63 g 1012 UTx Standard Blue, 0.580 round, 52 g 1015 UTx Midsize Blue, 0.580 round, 63 g WPX18-BCG Pro X 1.18 Blue/Grey WPX18-RCG Pro X 1.18 Red/Grey 1013 UTx Standard Red, 0.580 round, 52 g 1016 UTx Midsize Red, 0.580 round, 63 g WPX32-BKB Pro X 1.32 Black/Blue WPX32-CGB Pro X 1.32 Grey/Blue R.E.L. ACE with 3GEN: New R.E.L. are now made with Advanced Cohesive Elastomer (ACE) to ensure longer lasting surface tack. Patented 3GEN vibration dampening technology. 101001 R.E.L. ACE 3GEN ACE Undersize Neon Pink, 0.580 round, 44 g WPX32-BGY Pro X 1.32 Blue/Grey WPX32-RGY Pro X 1.32 Red/Grey 101009 R.E.L. ACE 3GEN ACE Standard Black, 0.580 round, 52 g 101016 R.E.L. ACE 3GEN ACE Midsize Black, 0.580 round, 63 g 101022 R.E.L. ACE 3GEN ACE Oversize Black, 0.580 round, 78 g WPX60-BKS Pro X 1.60 Black/Silver WPX60-CGB Pro X 1.60 Grey/Black 101012 R.E.L. ACE 3GEN ACE Standard Blue, 0.580 round, 52 g 101019 R.E.L. ACE 3GEN ACE Midsize Blue, 0.580 round, 63 g 101025 R.E.L. ACE 3GEN ACE Oversize Blue, 0.580 round, 78 g WPX60-BBK Pro X 1.60 Blue/Black WPX60-RBK Pro X 1.60 Red/Black Golf Pride Grips Golf Pride CP2: Introducing Golf Pride's softest performance grip: CP2 Pro and CP2 Wrap models. For golfers seeking a softer feel that offers comfort, control and superior performance. Innovative Control Core Technology reduces torque by 41& when compared to same grip without core. Soft rubber with high traction. Reduced taper for extra comfort. CCPS CP2 Pro Standard, 0.600 round, 51.5 g CCPM CP2 Pro Midsize, 0.600 round, 64 g CCPJ CP2 Pro Jumbo, 0.600 round, 78 g CCWS CCWM CCWJ CP2 Wrap Standard, 0.600 round, 51.5 g CP2 Wrap Midsize, 0.600 round, 64 g CP2 Wrap Jumbo, 0.600 round, 78 g New Decade MCC Platinum: Exclusive black Velvet cord in the upper hand area for firm all-weather control and soft, colored rubber in the lower hand for ultimate feel and responsiveness MCC-PLA-WH New Decade MCC Platinum Standard White, 0.600 round, 49.5 g MSC-PLA-WH New Decade MCC Platinum Midsize White, 0.600 round, 62 g 101013 R.E.L. ACE 3GEN ACE Standard Red, 0.580 round, 52 g 1010 R.E.L. ACE 3GEN ACE Midsize Red, 0.580 round, 63 g 101026 R.E.L. ACE 3GEN ACE Oversize Red, 0.580 round, 78 g 1010 R.E.L. ACE 3GEN ACE Standard Neon-Blue, 0.580 round, 52 g 101021 R.E.L. ACE 3GEN ACE Midsize Neon-Blue, 0.580 round, 63 g 101027 R.E.L. ACE 3GEN ACE Oversize Neon-Blue, 0.580 round, 78 g 101032 R.E.L. ACE 3GEN ACE Standard Orange, 0.580 round, 52 g 101018 R.E.L. ACE 3GEN ACE Midsize Orange, 0.580 round, 63 g 101024 R.E.L. ACE 3GEN ACE Oversize Orange, 0.580 round, 78 g Two-Thumb 2TDAD-BK The Daddy Black 2TDAD-RD The Daddy Red 2TDAD-USA The Daddy USA MCC-PLA-BL New Decade MCC Platinum Standard Blue, 0.600 round, 49.5 g 2TBL-BK Big Daddy Light Black MCC-PLA-RD New Decade MCC Platinum Standard Red, 0.600 round, 49.5 g 2TBDL-RD Big Daddy Light Red 12 New Grips 2TBDL-UK Big Daddy Light UK

Graphite Syntec Accuforce 70 Graphite PA-1281 100% high modulus, high strength graphite shaft. Designed with low/mid bend point for optimum trajectory for added distance. PA-1281-W-AL Wood A/L 4.2.335.580 45.5" 76 g High PA-1281-W-RS Wood R/S 4.0.335.600 46.5" 86 g Mid-High PA-1281-I-AL A/L 3.5.370.580 39.5" 75 g High PA-1281-I-RS R/S 3.5.370.600 40.5" 79 g Mid-High Syntec NanoForce Nano Carbon PA-1288 Advanced Nano Resin System technology and high strength carbon fibers. Nanotubes are infused into the epoxy resin system increasing the impact strength by %. The Nano reinforced resin also reduces vibration and promotes a great feel for straighter and longer shots. Item # Flex Torque Tip Butt Length Weight Ball Flight PA-1288-W-R R 3.5.335.600 46 62 g High PA-1288-W-S S 3.5.335.600 46 64 g High Syntec Accuforce 70 HB Hybrid PA-1284 Specially designed for today s popular hybrid clubs. 100% graphite. Stable tip, low torque design. Available now in Senior flex. PA-1284-I-A Hybrid A 3.5.370.600 42" 73 g Mid PA-1284-I-R Hybrid R 3.5.370.600 42" 75 g Mid PA-1284-I-S Hybrid S 3.5.370.600 42" 77 g Mid Syntec Multi-Ply Multi-Layer Thin Ply PA-1289 Made from thin ply, high strength carbon fibers. The Mult-Ply is made from 16 layers at the butt and 8 layers at the tip section whereas conventional table rolled shafts are made from only 5 layers. The high number of thin thin layers improves shaft hoop stiffness and maximizes the integrity of the shaft response for increased accuracy. Item # Flex Torque Tip Butt Length Weight Ball Flight PA-1289-W-R R 2.6.335.600 46 68 g High PA-1289-W-S S 2.6.335.600 46 72 g High Syntec Accuforce 60 Light Weight PA-1260 Filament wound construction eliminates spline and offers high consistency around the circumference of the shaft. Designed for players with a smoother tempo looking at improved trajectory and distance. PA-1260-I-AL AL 4.5.370.582 41 63 g Mid PA-1260-I-RS RS 4.3.370.590 41 63 g Mid Syntec X-POWER Graphite PA-1285 Quality, durable graphite-composite shaft, availabe at a very competitive price. PA-1285-W-L Wood L 5.5.335.580 45.5" 82 g High PA-1285-W-R Wood R 5.0.335.600 45.5" 87 g High PA-1285-I-L L 5.0.370.580 39.5" 79 g High PA-1285-I-R R 5.0.370.600 39.5" 87 g HIgh idrive Graphite Shafts Unlike conventional graphite shafts idrive graphite shafts are filament wound, not table rolled. High modulus material is woven around a special forming mandrel. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further. idrive Tour Graphite GID-TR 100% high modulus, high strength graphite shaft, filament wound for improved consistency. Low/mid bend point for mid/high ball trajectory and low/mid torque designed for all level golfers. Available in 3 colors: Black (A/L, R/S), White (A/L, R/S) and Pink (A/L only) GID-TR-W-AL Wood A/L 4.5.335.605 46" 67 g Mid-High GID-TR-W-RS Wood R/S 3.5.335.605 46" 72 g Mid-High GID-TR-I-AL A/L 4.1.370.600 40" 70 g Mid-High GID-TR-I-RS R/S 3.1.370.600 40" 70 g Mid-High Syntec Ultra 45 Ultra Light Weight PA-15 New ultra light weight high performance graphite shaft, great for golfers with smooth tempo looking for increased driver distance. Mid/Low bend point helps golfers to get the ball up in the air for increased carry distance. PA-15-W-A Ultra 45 A 5.4.335.590 46" 45.5 g Mid-High PA-15-W-R Ultra 45 R 4.6.335.600 46" 45.5 g Mid-High Syntec Ultra 55 Ultra Light Weight PA-1286 Syntec Ultra 65 Ultra Light Weight PA-1287 Ultra light weight high performance graphite shafts, made of 100% high grade carbon fibers. Available in 55 gm and 65 gm weight class. PA-1286-W-A Ultra 55 A 3.8.335.580 46" 57 g High PA-1286-W-R Ultra 55 R 3.8.335.600 46" 59 g Mid-High PA-1287-W-R Ultra 65 R 4.0.335.600 46" 65 g Mid-High PA-1287-W-S Ultra 65 S 4.0.335.600 46" 67 g Mid-High idrive Tour Hybrid Graphite GID-TRHY The idrive hybrid shaft is 42" long and features a mid bend point and low torque tip specially designed for today's popular hybrid clubs. GID-TRHY-AL Hybrid A/L 2.4.370.600 42" 74 g Mid GID-TRHY-RS Hybrid R/S 2.4.370.610 42" 74 g Mid idrive Tour Lite Graphite GID-TL The Tour Lite is 10 grams lighter than the standard idrive shafts, promoting a higher clubhead speed for more distance. Designed for golfers with smooth to average swing speed seeking extra distance. GID-TL-W-AL Wood A/L 4.5.335.600 46" 58 g Mid GID-TL-W-RS Wood R/S 4.1.335.600 46" 62 g Mid Syntec Shafts Trimming Instructions available online at www.monarkgolf.com 13

Steel Standard Stepped SS-82-I Wood SS-85-W Unbeatable combination of reliable quality and great value. Standard weight shaft with step pattern. SS-82-I-A/L SS-82-I-R/S A/L R/S.370.370.580.600 40" 40" 115 g 125 g Mid Mid SS-85-W-R/S Wood R/S.335.600 46" 130 g Mid CWS Tapered 0.355 APMCWST Constant Weight Design: Each shaft within the set weighs the same (regardless of the length) providing greater consistency. The result is superior distance control and tighter shot dispersion. Each shaft is manufactured to exacting weights and balance point positions. Specify when ordering. Pre-trimmed at half-inch increments from 40.5"(#3 ) to 37"(Wedges) CWS Tapered R.355.600 37"-40.5 110 g Low CWS Tapered S.355.600 37"-40.5 1 g Low CWS Tapered X.355.600 37"-40.5 130 g Low Standard Stepless SS-83-I Black Steel SS-1085-I-BK Sleek stepless design offers a high-end look at an unbeatable. Red Steel SS-1086-I-RD Sleek stepless design painted with a durable finish to provide a stunning appearance. SS-83-I-R/S R/S.370.600 41" 125 g Mid SS-1085-I-R/S R/S.370.600 41" 128 g Mid SS-1086-I-R/S R/S.370.600 41" 128 g Mid Spectre Lite SS-86-I Light weight design in a longer length, 42 length allows building longer clubs. SS-86-I-R/S R/S.370.600 42" 105 g Mid Shadow Steel APMSH-I Low kickpoint produces higher trajectories for improved distance and softer landings. APMSH-I-A/L APMSH-I-R/S A/L R/S.370.370.580.600 40" 42" 110 g 128 g High High Blue Steel PVD APMPVDBL Copper Steel PVD APMCOP Sleek stepless design coated with an exquisite copper or blue PVD finish. R/S.370.600 41" 128 g Mid Phanton Stepless SS-1083-I Lightweight, sleek stepless. A full half ounce lighter than conventional stepless designs to promote faster club head speed for more distance at less effort. SS-1083-I-R/S R/S.370.600 42" 105 g Mid Straight Putter 36, Stepped SS-87 Stepless SS-1287 Item # Shaft Tip Butt Length Weight SS-87 Putter.370.590 36" 116 g SS-1287 Putter.370.590 36" 1 g AccuLite 75 SS-1092-I The sub ultra-lightweight tsteel shaft is weighing 30 grams less than most lightweight steel shafts. The lightweight design is great for players with a smoother tempo to produce higher club head speed with a steel shaft. Great alternative to graphite in terms of weight, yet produces the accuracy and low torque consistency. SS-1092-I-R SS-1092-I-S R S.370.370.600.600 40" 40" 82 g 85 g High High AccuLite 85 SS-92-I Ultra-lightweight steel shaft with a cut weight of grams lighter than most lightweight steel shafts. The lightweight design provides additional feel and promotes trajectory & distance golfers seek from a graphite shaft, but provides the stability & control of a steel shaft. SS-92-I-R SS-92-I-S R S.370.370.600.600 40" 40" 92 g 95 g High High AccuLite 95 SS-1095-I AccuLite 95 Gunsmoke SS-1098-I High Performance, Lightweight shaft in the most popular weight range. Light enough to swing with less effort, yet not so light that it could sacrifice any control. Gunsmoke: Durable & attractive Physical Deposition Vapor (PVD) coating. SS-1095-R/S R/S.370.600 42" 105 g Mid-High SS-1098-R/S R/S.370.600 42" 102 g Mid-High Double Bend Putter SS-88 Curved putter shaft to create an offset. For putters with 72º angled bores / posts. Both RH and LH. Item # Shaft Tip Butt Length Weight SS-88 Putter.370.590 41" 116 g Triple Bend Putter, Right Hand SS-91-RH Left Hand SS-93-LH For putters with 90º bores / posts. Triple bend putter shaft to create an offset. Item # Shaft Tip Butt Length Weight SS-91/93 Putter.370.590 35" 1 g Single Bend Putter SS-90-RH For putters with 90º bores / posts. No offset. Item # Shaft Tip Butt Length Weight SS-90 Putter.370.590 36" 115 g Straight Belly 43 Straight Long Putter 53 For putters with angled bores / posts. Stepless design. SS-94 SS-95 Item # Shaft Tip Butt Length Weight SS-94 Putter.370.600 43 130 g SS-95 Putter.370.600 53 236 g Junior APMJR More flexible design is perfect for younger golfers. APMJR-I Junior.370.500 35" 102 g High APMJR-W Wood Junior.335.500 40" 107 g High Triple Bend Belly Putter 43 SS-1194-RH for Left Hand SS-1195-LH For putters with 90º bore angle to achieve 72º lie angle at grip plus offset. Item # Shaft Tip Butt Length Weight SS-1194 Putter.370.600 43" 8 g Apollo Steel Trimming Instructions available online at www.monarkgolf.com

REXTON GRIPS V-Line V-Line: Multiple surface patterns with different lines are strategically located at front and backside to ensure a secure grip. The upper portion is more textured, featuring vertical lines and V-line grooves for traction and all-weather control. The lower portion is smooth surface with subtle grooves for comfort and responsiveness. RE-04 V-Line Black Standard, 0.580 round, 51 g RE-05 RE-06 V-Line Red Standard, 0.580 round, 51 g V-Line Blue Standard, 0.580 round, 51 g Velvet Line Velvet Line: Great-feeling velvet-style grip with a splash of style. Made from high-grade rubber compounds RE-92 Pink Line Velvet Undersize, 0.560 round, 42 g RE-74 RE-76 RE-91 Red Line Velvet Standard, Red cap, Men's, 0.600 round, 50 g Yellow Line Velvet Standard, Yellow cap, Men's, 0.600 round, 50 g Brown Line Velvet Oversize (+1/16 ), 0.600 round, 64 g RE-81 Silver/Black Velvet Standard, 0.600 round, 50 g Color Line Color Line: Multiple surface patterns strategically positioned at upper hand and lower hand areas to provide both feel and slip resistance. Vibrant Colors to add some color to your game at an affordable price. RE-1217 Pink Velvet, Undersize, 0.560 round, 38 g RE-1213 RE-12 RE-1215 RE-1216 Yellow Velvet Standard, 0.580 round, 51 g Orange Velvet Standard, 0.580 round, 51 g Green Velvet Standard, 0.580 round, 51 g Sky Blue Velvet Standard, 0.580 round, 51 g Dual Texture Dual Texture: Dual molded in a dual-color design. Firm rubber compound in the upper area for all-weather performance and softer rubber in the lower area for comfort. Available in oversize for custom fitting. RE-1165 Dual Texture Red / Black Standard, 0.580 round, 48 g RE-1166 Dual Texture Red / Black Oversize (+1/16 ), 0.600 round, 65 g RE-1193 Dual Texture White / Black Standard, 0.580 round, 48 g RE-1194 Dual Texture White / Black Oversize (+1/16 ), 0.600 round, 65 g Velvet Velvet: Popular and proven surface pattern. Soft rubber compound with white color infill scheme. New name change from Professional to Rexton. RE-66 Velvet Standard Black/White, 0.580 round, 47 g RE-72 Velvet Midsize (+1/32 ) Black/White, 0.600 round, 55 g RE-73 Velvet Oversize (+1/16 ) Black/White, 0.600 round, 65 g RE-1271 Velvet Junior Black/White, Professional logo, 0.540 round, 37 g Putter Grips RE-1369 Velvet Pistol Putter Black/White, 0.580 round, 66 g RE-1269-RD Velvet Pistol Putter Red, Professional logo 0.580 round, 66 g RE-1084 Midsize Paddle Putter Black, 0.580 round, 83 g RE-84 Midsize Paddle Putter Red, 0.580 round, 83 g Rexton 15

Head Covers Headcovers will protect the paint from chipping and keep the clubs looking like new. Our padded headcovers are made from quality, soft neoprene materials in bold, stylish color combinations. Mesh and lycra stretch material for perfect fit. Ref. Item # Product Name Fits Numbers A HC-84-DR Red-Black Driver 500 cc #1 HC-84-FW Red-Black Fairway 0 cc #3, #4, #5, #7, #9, #11, #13, #15 HC-84-HY Red-Black Hybrid 150 cc #2-9, PW, SW B HC-1087-DR Grey-Black Driver 500 cc #1 HC-1087-FW Grey-Black Fairway 0 cc #3, #4, #5, #7, #9, #11, #13, #15 HC-1087-HY Grey-Black Hybrid 150 cc #2-9, PW, SW C HC-1089-DR White-Black Driver 500 cc #1 HC-1089-FW White-Black Fairway 0 cc #3, #4, #5, #7, #9, #11, #13, #15 HC-1089-HY White-Black Hybrid 150 cc #2-9, PW, SW A B C D D HC-TPWH-DR Turbo Power Driver 500 cc #1 HC-TPWH-FW Turbo Power Fairway 0 cc #3, #5, #7 HC-TPWH-HY Turbo Power Hybrid 150 cc #2, #3, #4, #5 E HC-HEA-DR Heater Driver Headcover, red/black 500 cc #1 F HC-IDS-DR i-drive Driver Headcover, red/black 500 cc #1 G HC-INT-DR Integra Driver Headcover, red/black 500 cc #1 H HC-1HYB-HY Grey-Black Hybrid, Hybrid logo 150 cc #2-9, PW, SW I HC-KT01-DR Contour, no logo, black, Driver 500 cc #1 HC-KT01-FW Contour, no logo, black, Fairway 0 cc #3, #5, #7, #9 HC-KT01-HY Contour, no logo, black, Hybrid 150 cc #1-9, PW, SW E F G H I J HC-1292 Window Head Covers, set of 10 K HC-12 Head Covers, set of 8 #3-SW L HC-69 Mallet Putter, regular size M HC-60 Mallet Putter, large size N HC-1060 Blade Putter, black neoprene O HC-KT01F Mesh Blade Putter P HC-4105 White Half-Mallet Putter Q HC-12 Turbo Power Mallet Putter N J K L M O P Q Ref. Item # Product Name A AHCA Parrot B AHCB Tiger C AHCE Beagle D AHCF Lion E AHCI Mallard Duck F AHCJ Bald Eagle G AHCK Gorilla H AHCM Penguin I AHCN Gator J AHCQ Emperor Penguin Animal Head Covers A B Why put boring old headcovers in your bag? Let your personality show with fun animal headcovers. Our animal headcovers are whimsical, functional and affordable. Fits drivers up to 460 cc. C D E F G H I J Tour Cabretta Leather Glove GL-91 Flex All Weather Glove GL-1301 Soft cabretta leather glove with mesh lining for Top-grade synthetic leather. Palm and Thumb comfort and breathability. areas are Cabretta leather reinforced. LH glove is for right-handed golfers and vice versa. LH glove is for right-handed golfers. Size Mens LH Mens RH Size Mens LH Mens Small X Mens Medium X Mens Medium X X Mens ML X Mens ML X X Mens Large X Mens Large X X Mens XL X Mens XL X X Cadet Medium X Cadet Medium X Cadet ML X Cadet ML X Cadet Large X Cadet Large X Cadet XL X Cadet XL X Ref. Item# Product Name A TGAC-311 Rubber Golf Ball Pick-up B TGAC-305 Three Rubber Tees White C TGAC-338 Glove Keeper D TGAC-362 3-in-1 Pocket Brush E TGAC-417 Two-Sided Cleaning Brush F TGAC-312 Perforated Practice Golf Balls G T100-234 100 pcs 2-3/4 White Golf Tees T100-3 100 pcs 3-1/4 White Golf Tees 16 Accessories T500-234 500 pcs 2-3/4 White Golf Tees T500-3 500 pcs 3-1/4 White Golf Tees E Golf Gloves / Accessories A B D C F G

Tools /Supplies FE-37 Wood, 1/4 0.335 ID 12.2 mm OD Shaft tip Plugs FE-38, 1/4 0.370 ID 13.4mm OD FE-1, 1/2 0.370 ID 13.4mm OD FE-41, 1/2 0.370 ID 13.4mm OD FE-44 Wood, 1/2 0.335 ID 12.4 mm OD Spiral deburring roll & mandrell Wood, Gold Ring 16 mm 0.335 ID 12.7 mm OD Ferrules (pack of 10) FE-36 FE-61 FE-62, Gold Ring, Silver Ring, Gold/Red 16 mm 16 mm 16 mm 0.370 ID 0.370 ID 0.370 ID 13.2 mm OD 13.4 mm OD 13.4 mm OD FE-4 FE-65 FE-66 Wood, Silver Ring 16 mm 0.335 ID 12.7 mm OD Wood, Gold/Red 16 mm 0.335 ID 12.7 mm OD Epoxy Shaft extender Shafting Epoxy EY-01 24 Hour Epoxy, 8 oz. Squeeze Bottle Kit EY-02 24 Hour Epoxy, 16 oz. Squeeze Bottle Kit EY-03 5 Min. Rapid-Epoxy, 30 ml. Syringe Kit EY-04 10 Min. Fast-Epoxy, 8 oz. Squeeze Bottle Kit EY-05 5 Min. Rapid-Epoxy, 3.5 gm. Double/Bubble Grip Tape TP-01 Two-Sided Grip Tape, 3/4 x 36 yard TP-02 Two-Sided Grip Tape, 2 x 36 yard TP-04 Two-Sided Strips, 2 x 9, 10 Strips per Unit Shaft Extender GSE 0.600 standard graphite shafts GSEUL 0.610 for ultralight graphite shafts SSE For steel shafts, Aluminum Shafting Beads SB 4 oz. Jar. For proper alignment of shaft. Spiral Deburring Roll & Mandrell Item-No. Excellent Description tool for cleaning the inside of a hosel DB-1 SET (1 Mandrell + 5 Rolls) DB-2 Deburring rolls (pack of 5 Rolls) Adaptors (pack of 4) FE-51 Bushing Ferrule (converts 0.350 ID to.335 ID) FE-52 Bushing Hosel (converts 0.350 ID to.335 ID) Shaft Tip Plugs (pack of 10) FE-53 Shaft Tip Plug for Graphite FE-54 Shaft Tip Plug for Steel Shaft Clamp RVC Solid Rubber Vise Clamp High Density Lead Tape LT-1 Self-adhesive lead tape adds swingweight. High density Lead tape Grip tape Shaft clamp H001 H002 H003 Putter Hosel Adapters Stainless steel adapters fit any putter with bore 90º socket. H-001 Long/Broomstick Putter Adapter: Converts lie angle to 79º for long putters. H-002 Slant Hosel Putter Adapter: Converts RH putter with 90º bore to 72º to use straight shaft. H-003 Plumber s Neck Putter Adapter: Converts RH putter with 90º bore to 72º. Creates offset. Shafting beads FE-52 FE-51 Counterweight Inserts CW Backweighting Inserts let you easily adjust the feel and performance of any club. Install insert into the butt end of the shaft prior to installing the grip. CWG-16 Counterweight for Graphite, 16 gm CWG-24 Counterweight for Graphite, 24 gm CWG-32 Counterweight for Graphite, 32 gm CWS-24 Counterweight for Steel, 24 gm Counterweight Inserts Shaft Tip Weight Plugs WP Insert into the tip end of shaft to customize swingweight. 30 plugs per pack. WPS-3 Fits steel iron shafts, 3 gm WPS-5 Fits steel iron shafts, 5 gm WPS-7 Fits steel iron shafts, 7 gm WPG-3 Fits graphite iron/wood shafts, 3 gm GDW9000 GDW9391 Brass Shims Shaft Tip Weight Plugs Hosel Brushes Great for removing old epoxy and debris from inside hosel. Brushes without handle can be attached to a power drill. GDW9000 Brush w/o Handle GDW9001 Wood Brush w/o Handle GDW9391 Brush with Handle GDW9393 Wood Brush with Handle Brass Shims JSSHIM-335 Standard fits where there is a 0.15 gap. JSSHIM-350 Oversize fits where there is a 0.30 gap. True Temper SensiCore Inserts SCI-8 Insert these frequency-tuned polymer cores inside shafts to eliminate up to 70% of unwanted vibration at impact. No epoxy is necessary. Sold in packs of 8 inserts. Tools 17

18 (P-1) Price List Effective January 1, (1) For Built Clubs with base shafts & grips please refer to the product description in this catalog. Custom Built Clubs with upgrade shafts & grips result in different prices, for upgrade options please refer to our website www.monarkgolf.com. (2) We reserve the right to change prices, specifications, model designs without prior notice. (3) All sales according to Seller s Terms & Conditions. For our Terms & Conditions please refer to our website www.monarkgolf.com. (4) Tip trimming instructions are available online at www.monarkgolf.com. Page 2 Titanium Drivers Price Built Club Graphite New TW-SOAR Turbo Power Soar Sliding Weight Driver $59.90 $74.69 New TW-BMT2AD Heater BMT2 Adjustable Driver $84.90 $99.69 New BMT2AD-SLV Replacement Sleeve for BMT2AD $.95 New TW-BMT2NA Heater BMT2 Titanium Driver $50.90 $65.69 New TW-SWSP Turbo Power Swift Speed Titan Driver $51.50 $66.29 New TW-1350/51 Tour Model X1 Titanium Driver $50.90 $65.69 Page 3 Titanium Drivers Built Club Graphite TW-1340 Heater BMT Titanium Driver $46.90 $61.69 TW-1330 Turbo Power FBS 2.0 Titanium Driver $49.90 $64.69 LH TW-1330 Turbo Power FBS 2.0 Left Hand $51.90 $66.69 TW-1366 Turbo Power Aim Offset Titan Driver $49.90 $64.69 TW-1360 Turbo Power X-Heat Titanium Driver $48.90 $63.69 TW-1336 Turbo Power Z-2.5 Titanium Driver $49.90 $64.69 Page 4 Matrix Drivers Built Club Graphite New WA-F35 Tour Model F-35 Matrix Driver $16.90 $31.40 WA-1129 Tour Model Heater 3.0 Matrix Driver $15.90 $30.40 Page 4 Fairway Woods New W-BMT2FW Heater BMT2 Fairway Wood $.95 $35.74 New W-SWSPFW Turbo Power Swift Speed Fairway Wood $19.50 $34.29 New W-WX1FW Tour Model X1 Fairway Wood $.45 $35.24 Page 5 Fairway Woods Built Club Graphite W-1340 Heater BMT Fairway Wood $.65 $35.44 W-1330 Turbo Power FBS 2.0 Fairway Wood $18.50 $33.29 LH W-1330 Turbo Power FBS 2.0 Left Hand $19.00 $33.79 W-1366 Turbo Power Aim Offset $17.50 $32.29 W-1360 Turbo Power X-Heat Fairway $17.50 $32.29 W-1336 Turbo Power Z-2.5 Fairway Wood $18.00 $32.79 Page 6 Hybrids Built Club Graphite New IW-BMT2HY Heater BMT2 Hybrid $19.45 $34.24 New IW-SWSPHY Turbo Power SwiftSpeed Hybrid $18.85 $33.64 New IW-X1HY Tour Model X1 Hybrid $18.85 $33.64 W-1341 Heater BMT Hybrid $19. $34.00 W-1331-RH Turbo Power FBS 2.0 Hybrid $17.95 $32.74 LH W-1331-LH Turbo Power FBS 2.0 Left Hand $18.45 $33.24 Page 7 Hybrids Built Club Graphite RH/LH W-1135 Heater 4.0 White Hybrid $16.00 $30.80 W-1361 Turbo Power X-Heat Hybrid $16.50 $31.29 W-1348 Turbo Power Z-2.5 Hybrid $17.25 $32.00 Page 7 s Built Club Steel New I-BMT2 Heater BMT2 $7.79 $16.58 New I-SWSP Turbo Power SwiftSpeed $8.10 $16.89 Page 8 s Built Club Steel I-1340 Heater BMT $7.59 $16.38 New I-1340 Heater BMT Tour $7.59 $16.38 I-1330 Turbo Power FBS 2.0 $7.99 $16.78 LH I-1330 Turbo Power FBS 2.0 Left Hand $8.25 $17.00 I-1230 Turbo Power FBS Hollow Core $12.95 $21.74 I-1230 Turbo Power FBS Cavity Back $8.95 $17.74 I-1360 Turbo Power X-Heat $7.89 $16.68 Page 9 s Built Club Steel I-1336 Turbo Power Z-2.5 $7.99 $16.78 Page 9 Wedges Built Club Steel RH/LH I-1028 Professional Open Wedge $8.95 $17.74 RH/LH I-1051 Intregra Soft Cast Wedge $7.95 $16.74 Page 9 Stainless Steel Putters Built Club Steel SP-1223 T-7 Twin Engine Mallet Putter $15.99 $26.00 RH/LH SP-12 Turbo Power Specter White Mallet $18.35 $28.19 RH/LH SP-1215 Turbo Power Specter Belly Putter $19.45 n/a New SP-P16 P-16 High MOI Mallet Putter $17.95 $27.98 Page 10 Stainless Steel Putters Built Club Steel SP-1011 Armada Mallet Putter, any color $16.99 $26.85 SP-1134 Heater 3.0 White Blade Putter $16.99 $26.00 SP-1234 Heater 3.0 Belly Blade Putter $18.35 n/a Page 10 Value Putters / Value Chipper Built Club Steel ZP-964 2-Ball Mallet Zinc Putter $5.75 $.78 ZP-993 Ring Mallet Zinc Putter $5.75 $.78 RH/LH ZP-1161 Dual Wing Mallet Zinc Putter $5.75 $.78 RH/LH ZP-1110 Blade Black Zinc Putter $5.75 $.78 ZC-1069 Two-Way Chipper Zinc $5.95 $.98 Page 11 New Shafts for New GSK-WRAITH SK Fiber Wraith $49.95 New GA-TB Aldila Tour Blue $249.50 New GA-TG Aldila Tour Green $249.50 New UPXV70 Project-X PVx Tour $274.99 New GR-BOOST Grafalloy Boost $79.99 New GD-GSS70 Graphite Design G-Series Silver $89.00 New GD-GSIR Graphite Design G-Series $35.00 New GU-WIND UST-Mamiya Elements Wind $189.99 New GU-FIRE UST-Mamiya Elements Fire $189.99 New GU-RC5 UST-Mamiya Recoil $39.99 New GU-V5 UST-Mamiya ProForce V5 $79.99 New GU-55GOLD UST-Mamiya 55 Gold $39.99 New GU-DRVR UST-Mamiya drvr Wood $19.99 New GU-HYB UST-Mamiya hyb Hybrid $16.99 New GU-IRN UST-Mamiya irn $13.99 New GRAM-XXX Graman GMAXXX $99.95 Page 12 New Grips for New 6TCH-BBW Winn DuraTech Hybrid Midsize $7.49 New 5DT-NB Winn DriTac Standard Navy Blue $5.99 New 6DT-NB Winn DriTac Midsize Navy Blue $6.49 New 7DT-NB Winn DriTac Oversize Navy Blue $7.99 New WPX18 Winn Pro X 1.18, any color $19.99 New WPX32 Winn Pro X 1.32, any color $.99 New WPX60 Winn Pro X 1.60, any color $23.99 New CCPS Golf Pride CP2 Pro Standard $6.99 New CCWS Golf Pride CP2 Wrap Standard $6.99 New CCPM Golf Pride CP2 Pro Midsize $7.49 New CCWM Golf Pride CP2 Wrap Midsize $7.49 New CCPJ Golf Pride CP2 Pro Jumbo $7.99 New CCWJ Golf Pride CP2 Wrap Jumbo $7.99 New MCC-PLA New Decade MCC Platinum Standard, any color $9.59 New MSC-PLA-WH New Decade MCC Platinum Midsize $10.09 New VSTS Golf Pride Tour Velvet Super Tack Standard $5.99 New VSTM Golf Pride Tour Velvet Super Tack Midsize $6.99 New GRMC Golf Pride Z-Grip Cord Midsize $10.99 New 101 Lamkin UTx Standard, any color $8.99 New 101 Lamkin UTx Midsize, any color $9.49 New 10100 R.E.L. ACE 3GEN ACE Undersize Pink $5.99 New 10100 R.E.L. ACE 3GEN ACE Standard, any color $5.99 New 10101 R.E.L. ACE 3GEN ACE Midsize, any color $6.49 New 10102 R.E.L. ACE 3GEN ACE Oversize, any color $6.99 New 2TDAD-BK Two-Thumb The Daddy, any color $24.95 New 2TBL-BK Two-Thumb Big Daddy Light, any color $26.95 Page 13: Syntech Graphite Shafts PA-1281-W/ -I Accuforce 70 Graphite $8.65 PA-1284-I Accuforce 70 HB Hybrid Graphite $8.95 PA-1260-I Accuforce 60 Light Weight $10.50 PA-1285-W/ -I X-Power Graphite Wood / $6.95 PA-15-W Ultra 45 Graphite Wood $26.90 PA-1286-W Ultra 55 Graphite Wood $13.50 PA-1287-W Ultra 65 Graphite Wood $11.50 PA-1288-W NanoForce Graphite Wood $.45 PA-1289-W Multi-Ply Graphite Wood $.50 Page 13: idrive Graphite Shafts GID-TR idrive Tour Graphite, any color $9.75 GID-TRHY idrive Tour Hybrid Graphite $9.75 GID-TL idrive Tour Lite Graphite $11.95 Page : Apollo Steel Shafts SS-82-I Standard Stepped, R/S or A/L $2.95 SS-85-W Standard Stepped Wood, R/S or A/L $3. www.monarkgolf.com 1.877-551-4653

SS-83-I Standard Stepless, R/S $3.40 SS-86-I Spectre Lite, R/S $5.49 APMSH-I Shadow, Steel, R/S $4.70 SS-1083-I Phanton Stepless $7.95 SS-1092-I AccuLite 75, R/S $10.95 SS-92-I AccuLite 85, R/S $8.49 SS-1095-I AccuLite 95, R/S $6.49 SS-1098-I AccuLite 95 Gunsmoke $10.59 APMJR-I Junior $2.95 APMJR-W Junior Wood $3.15 APMCWST ACWS 0.355 Tapered $11.45 SS-1085-I Black Stepless, R/S $6.45 SS-1086-I Red Stepless, R/S $6.45 APMPVDBL Blue Steel PVD $11.49 APMCOP Copper Steel PVD $11.49 SS-87 Straight Stepped Putter, 36 $2.95 SS-1287 Straight Stepless Putter, 36 $3.40 SS-88 Double-Bend Putter, 41 $3.80 RH/LH SS-91/ -93 Triple-Bend Putter, 35 $3.99 SS-90 Single-Bend Putter, 35 $3.80 SS-94 Midlength (Belly) 43 Putter $5.40 SS-95 Long 53 Putter, stepless $8.25 RH/LH SS-1194/ -95 Triple-Bend Belly Putter 43 $6.49 Page 15 Rexton Grips Grip Kit New RE-04 V-Line Black Standard $1.09 $.49 New RE-05 V-Line Red Standard $1.29 $22.98 New RE-06 V-Line Blue Standard $1.29 $22.98 RE-92 Pink Line Velvet Undersize $0.99 $18.99 RE-74 Red Line Velvet, Standard $0.94 $18.49 RE-76 Yellow Line Velvet, Standard $0.94 $18.49 RE-91 Brown Line Velvet Oversize $1.09 $.45 RE-81 Silver/Black Velvet, Standard $0.99 $18.99 RE-1217 Pink Velvet Undersize $1.39 $23.98 RE-1213-YE Yellow Velvet Standard $1.39 $23.98 RE-12-OR Orange Velvet Standard $1.39 $23.98 RE-1215-GN Green Velvet Standard $1.39 $23.98 RE-1216-BL Sky Blue Standard $1.39 $23.98 RE-1165 Dual-Texture Red/Black, Standard $1.89 $29.99 RE-1166 Dual-Texture Red/Black Oversize $1.99 $31.99 RE-1193 Dual-Texture White/Black, Standard $1.89 $29.99 RE-1194 Dual-Texture White/Black Oversize $1.99 $31.99 RE-66 Velvet Black/White Standard $0.89 $17.85 RE-72 Velvet Black/White Midsize $0.99 $18.98 RE-73 Velvet Black/White Velvet Oversize $1.05 $19.89 RE-1271 PRO Velvet Black/White Junior $0.89 $17.85 RE-1084 Black Paddle Putter, Red Cap $1.35 / RE-84 Red Paddle Putter $1.39 / RE-1369 Black/White Pistol Putter $0.99 / RE-1269-RD PRO Red Pistol Putter $0.99 / Page 16: Head Covers HC-84 Red-Black, any size $4.98 HC-1087 Grey-Black, any size $4.98 HC-1089 White-Black, any size $4.98 New HC-TPWH-DR- Turbo Power, Driver $6.95 New HC-TPWH-FW- Turbo Power, Fairway, Hybrid $6.70 New HC-HEA-DR Heater Driver $6.00 New HC-IDS-DR i-drive Driver $6.00 New HC-INT-DR Integra Driver $6.00 New HC-HYB-HY Hybrid logo, Hybrid $4.98 New HC-KT01-DR Contour, Driver $4.45 New HC-KT01-FW Contour, Fairway $4.45 New HC-KT01-HY Contour, Hybrid $3.45 New HC-1292 Window Headcovers, Set of 10 $12.50 HC-12 Headcover, Set of #3-SW $8.49 HC-69 Mallet Putter regular size $2.19 HC-60 Mallet Putter large size $2.99 HC-1060 Blade Putter $1.95 New HC-KT01F Mesh Blade Putter $2.95 New HC-4105 White Half-Mallet Putter $2.95 New HC-12- Turbo Power Mallet Putter $5.45 Page 16: Page 16: Page 16: Page 17: Animal Head Covers AHC Any Style $10.95 Golf Gloves GL-91 Tour Cabretta Leather Glove $5.99 GL-1301 Flex All-Weather Glove $5.49 Accessories TGAC-311 Rubber Golf Ball Pick-up $1.45 TGAC-305 Three Rubber Tees White $1.45 TGAC-338 Glove Keeper $1.95 TGAC-362 3-in-1 Pocket Brush $2.45 TGAC-417 Two-Sided Cleaning Brush $1.45 TGAC-312 Perforated Practice Balls $1.95 Tee234-100 100 Golf Tees 2-3/4, White $3.95 Tee3-100 100 Golf Tees 3-1/4, White $3.95 Tee234-500 500 Golf Tees 2-3/4, White $12.95 Tee3-500 500 Golf Tees 3-1/4, White $15.95 Clubmaking Supplies FE-38/41/37/35/44 Ferrule, No Ring (10 pc.) $1.80 FE-36/-4/-61/-65 Ferrule, 1 Ring (10 pc.) $2.30 FE-62/-66 Ferrule, 2 Ring (10 pc.) $2.85 FE-1 Ferrule, White (10 pc.) $3.50 FE-51 Bushing Ferrule Adapter (4 pc.) $2.90 FE-52 Bushing Hosel Adapter (4 pc.) $2.90 FE-53/-54 Shaft Tip Plugs (10 pc.) $2.60 New JSSHIM-335 Brass Shims, standard $0.85 New JSSHIM-350 Brass Shims, oversize $0.95 EY-01 24-Hour Epoxy, 8 oz. Bottle Kit $9.49 EY-02 24-Hour Epoxy, 16 oz. Bottle Kit $.95 EY-03 Rapid Epoxy, 30 ml. Syringe Kit $7.50 EY-04 Fast Epoxy, 8 oz. Bottle Kit $12.95 EY-05 Rapid Epoxy, Double/Bubble 3.5 g. $1.39 TP-01 Grip Tape ¾, 36 yard $3.95 TP-02 Grip Tape 2, 36 yard $8.95 TP-04 Grip Tape Strips 2, pack of 10 $2.90 GSE / GSEUL Extender, molded, for graphite $1.90 SSE Extender, Aluminum, for steel $1.75 H-001 Long Putter Adapter $3.49 H-002 Slant Putter Adapter $3.49 H-003 Plumber s Neck Putter Adapter $3.49 RVC Rubber Vise Clamp $2.50 SB Shafting Beads, 4 oz. Jar $3.95 DB-1 Deburring Set (1 Mandrell + 5 Rolls) $6.95 DB-2 Deburring Rolls (5 Rolls) $4.95 New GDW-900 Hosel Brush without Handle $5.95 New GDW-939 Hosel Brush with Handle $8.95 CW Counter Weight Butt Inserts $1.60 WPS-3 3 gm Tip Weight Plugs for Steel (30) $3.65 WPS-5 5 gm Tip Weight Plugs for Steel (30) $3.75 WPS-7 7 gm Tip Weight Plugs for Steel (30) $4.85 WPG-3 3 gm Tip Weight Plugs for Graphite (30) $3.60 LT-1 Lead Tape Foil, 0.50 x 100 $3.90 SCI-8 True Temper SensiCore Inserts (pack of 8) $27.95 Rear Page: OEM Parts A GDW5229 / 30 Sleeve Adapter for SLDR $29.95 B GDW5225 / 26 Sleeve Adapter for R1 TP $29.95 C GDW5235 / 36 Sleeve Adapter for RBZ Stage2 $29.95 D GDW5015 / 16 Sleeve for R9/R11, Red/Black $26.45 E GDW5017 / 18 Sleeve for R9/R11, Red/White $26.45 F GDW5019//24 Sleeve for R9/R11, Green/Black $26.45 G GDW5027 R1 Adjustable Sole Plate $24.95 H GDW5025 R11 Adjustable Sole Plate $21.95 I GDW5026 R11S Adjustable Sole Plate $23.95 J GDW5035 Replacement Bolt & Washer for SLDR, R1, RBZ, R11 $4.95 K GDW505 Replacement Weights for R1, R11S, R11, R9 L GDW508 RBZ Weights Green for RBZ, RBZ Stage2 Rear Page: Avon Grips New AG-1038 Evolution EV1 Standard, any color $3.70 New AG-1039 Evolution EV1 Jumbo, any color $3.80 New AG-1015 Chamois Undersize Pink $2.75 New AG-1016 Chamois Standard, any color $2.75 New AG-10 Chamois Oversize, any color $2.90 www.monarkgolf.com 1.877-551-4653 (P-2) 19

MONARK Golf Supply Inc. P.O. Box 1263 Walnut, CA 91788-1263 1-(877)-551-4653 PRSRT. STD. U.S. Postage PAID Glendale, CA Permit No. 100 Monark Golf All Rights Reserved Catalog Price: $2.00 OEM Replacement Parts Ref. Item # Product Name Fits Numbers TaylorMade A GDW5229 Sleeve Adapter for SLDR 0.350 1.5º adjust A GDW5230 Sleeve Adapter for SLDR 0.335 1.5º adjust B GDW5226 Sleeve Adapter for R1 TP 0.350 2º adjust B GDW5225 Sleeve Adapter for R1 TP 0.335 2º adjust C GDW5236 Sleeve Adapter for RBZ Stage2 0.350 1.5º adjust C GDW5235 Sleeve Adapter for RBZ Stage2 0.335 1.5º adjust A B C D E F D GDW5016 Sleeve for R9/R11, Red/Black 0.350 1.5º adjust D GDW5015 Sleeve for R9/R11, Red/Black 0.335 1.5º adjust E GDW5017 Sleeve for R9/R11, Red/White 0.350 1.5º adjust E GDW5018 Sleeve for R9/R11, Red/White 0.335 1.5º adjust G H I F GDW50 Sleeve for R9/R11, Green/Black 0.350 1.5º adjust F GDW5024 Sleeve for R9/R11, Green/Black 0.335 1º adjust F GDW5019 Sleeve for R9/R11, Green/Black 0.335 1.5º adjust G GDW5027 R1 Adjustable Sole Plate 7 Position, 4º H GDW5025 R11 Adjustable Sole Plate, 2º I GDW5026 R11S Adjustable Sole Plate, 3º J GDW5035 Replacement Bolt & Washer for JetSpeed, SLDR, R1, RBZ, R11S, R11, R9º D E F G J K More OEM Parts available online at www.monarkgolf.com Avon Grips New Evolution EV1 features highly polished tack pads to combine the ultimate tacky feel with all-weather performance. Each tack pad acts as a platform gripping to the player s hands, allowing the hands to stick to the gripping surface while gaining traction against the surrounding relief edges of each tack pad. Anti-rotation pattern engineered with soft edges to reduce hand discomfort. Constructed from a dual compound for just the right feel. Edge styling and surface patterns engineered for optimal hand placement and performance. A AG-1038-GY AG-1039-GY Evolution EV1 Standard Gray, 0.600 round, 54 g Evolution EV1 Jumbo Gray, 0.600 round, 64 g B AG-1038-OR AG-1039-OR Evolution EV1 Standard Orange, 0.600 round, 54 g Evolution EV1 Jumbo Orange, 0.600 round, 64 g C AG-1038-PK Evolution EV1 Standard Pink, 0.600 round, 54 g AG-1039-PK Evolution EV1 Jumbo Pink, 0.600 round, 64 g The Original Chamois design with its innovative Air-Cushioned Absorption System (ACAS) offers enhanced comfort and soft supple feel, great for golfers in need of arthritic relief. AG-1015-PK Chamois Undersize Pink, 0.560 ribbed, 38 g AG-1016-BK Chamois Standard Black, 0.580 ribbed, 48 g AG-10-BK Chamois Oversize (+3/32 ) Black, 0.600 ribbed, 65 g AG-1016-BL Chamois Standard Blue, 0.580 ribbed, 48 g AG-10-BL Chamois Oversize (+3/32 ) Blue, 0.600 ribbed, 65 g AG-1016-RD Chamois Standard Red, 0.580 ribbed, 48 g AG-10-RD Chamois Oversize (+3/32 ) Red, 0.600 ribbed, 65 g www.monarkgolf.com 24 / 7 Secured Online Ordering 1 - ( 8 7 7 ) 5 5 1-4 6 5 3 8:30 a.m 5:00 p.m. PST, Mon. - Fri. Fax your order: (909) 598-5444 K GDW505 Replacement Weights for R1, R11S, R11, R9 L GDW508 RBZ Weights Green for RBZ, RBZ Stage2 H I J K AG-1016-YE AG-10-YE AG-1016-OR AG-1016-OR AG-1016-GN AG-10-GN AG-1019-BR AG-1018-BR Chamois Standard Yellow, 0.580 ribbed, 48 g Chamois Oversize (+3/32 ) Yellow, 0.600 ribbed, 65 g Chamois Standard Orange, 0.580 ribbed, 48 g Chamois Oversize (+3/32 ) Orange, 0.600 ribbed, 65 g Chamois Standard Green, 0.580 ribbed, 48 g Chamois Oversize (+3/32 ) Green, 0.600 ribbed, 65 g Chamois Standard Brown, 0.580 ribbed, 48 g Chamois Oversize (+3/32 ) Brown, 0.600 ribbed, 65 g A B C D E F G H I J K MONARK Golf Supply Inc. P.O. Box 1263, Walnut, CA 91788-1263, U.S.A. Sales Toll Free: (877) 551-4653 Tel.: (909) 598-5443 Fax: (909) 598-5444 E-mail: monark@aol.com Website: www.monarkgolf.com