Primary Terminals & Connectors

Similar documents
PRODUCT SPECIFICATION

AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS

Outer contact 1.0 milliohm max.

SMB Series. SMB Series. Specifications. Interface Dimensions. Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time.

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

CABLE CONNECTORS CABLE CONNECTORS

DK ton, Double-acting, Die-type Crimping Tool

I.H.S INSTALLATION INSTRUCTIONS

PAGE INDEX PAGE # CATALOG NUMBER BUS SUPPORTS B 1 AWSTFR BUS SUPPORTS B 2 AWTTFR BUS SUPPORTS B 3 AWTESR BUS SUPPORTS B 4 AWLI BUS SUPPORTS B 6 AACB

SMB/SMC Coaxial Connectors

3/4 SafeClaw Anchorage Connectors

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

PURA. Pure Gas Dewpoint Transmitter. Users Guide

The Outer Seal is highly abrasion resistant and provides mechanical stiffness to the splice in order to better match the cable stiffness.

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation

Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications

TECHNICAL BULLETIN PINPOINT CONDUIT COUPLING AND SPLICING RECOMMENDATIONS

Continental Industries TRANSITION FITTINGS or FAX Visit

POWR-BLOKS Distribution/Splicer Blocks and Covers

40K TLX Nozzles 40K TLX

UHF/Mini-UHF Coaxial Connectors

38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors

RECTANGULAR CONNECTORS

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS

CPTCONNECTOR. Board-to-wire. Features. Specifications

[Instruments for vacuum measurement, checking and adjustment] 3

DRAFT. NEW Products SWIVEL LOOP HANGER 100 LOOP HANGER SURGE RESTRAINT LHSR6. See page 20. See page 20

Small packagings with 100 pcs./bag are available at additional costs! colour of insulation. colour of insulation. cross section mm 2.

Mainz Product Catalogue

C-Line Electrical Connectors

COOPER POWER SERIES. 600 A, 15, 25, and 35 kv Class Cleer Grounding Elbow Installation Instructions. Loadbreak Apparatus Connectors MN650056EN

CABLE GLANDS. Connector~Tech Providing Harsh Environment Connector SOLUTIONS

FRONT BOLT ACTION ASSAULT SHOTGUN

THE BEST SELECTION OF QUALITY TWIST-ON WIRE CONNECTORS UNDER ONE BRAND

HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT

*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.

GENERAL APPLICATION NOTES

ibridge and ibridge Ultra

1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)

Series KJ. Miniature One-touch Fittings. Applicable Tube

AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications

INSTRUCTION MANUAL. January 23, 2003, Revision 0

will not support combustion

Continental Industries STEEL SERVICE TEES or FAX Visit

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

LOKRING FOR THE BEST A/C REPLACEMENT CONNECTIONS

SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN

BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS

1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)

Operating Instructions

Dual Electronic Basketball System Owners Manual

SEALED CONNECTORS FOR THE LIMIT SWITCHES

Block & Tackle. Block & Tackle. Klein s line of block and tackle is engineered for high-strength requirements.

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW

FASTENERS, CLAMPS & STRAPS

APPS-160 Gen 2 User Manual

SIMPLAIR PIPING TOOL. JXT Company

Hoses and Lances 20,000 PSI

TOTALINE BRASS FITTINGS

RoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator

D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER

SALT GENERATOR FOR ABOVEGROUND POOLS

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.

Casing Spacer Technology Leaders

powr-bloks POWR-GARD Fuseblocks Distribution/Splicer Blocks and Covers Applications Connectors Description Ampere Ratings Specifications

1 SafeClaw Anchorage Connectors

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods

K Page 1 of 48 Air Intake - Pg. 17

REMKE STYLE PowR-TECK CONNECTORS

Flexible & Intelligent

How to terminate an F/UTP CAT 6 cable with the LP-LRJ458P8CC6FS21 Plug.

Differential pressure switch / Lube oil protection control MP 54 and MP 55

Related Elevator Products

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage

4/2 way Pneumatic Solenoid Valve

Pegasus Series Amphenol Pcd

Halsey Taylor Owners Manual

CLIMBING Pads. Straps Gaffs Spikes Hardware

Repair Stations. Securabike. Advantages

Parts Manual. Versa Hand Arm

Description Length Width Thickness Max. Bundle Tensile Strength Screw Size Qty./Bag Cat. No.

APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL

GigaBIX Multi System 케이블콘 ( 주 ) 기술지원팀 :: 콘넥터문의 케이블문의 Termination Kits and Basic Components

AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications

accidents which arise due to non-observance of these instructions and the safety information herein.

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

INSTALLATION & MAINTENANCE INSTRUCTION

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer

GT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories

Prewired position switches FA series

Cable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.

New, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!

Pilot Check Valve: Metal Body Type

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

GREIG FILTERS, INC. OPERATION MANUAL

AP# TUNE-UP KIT CONTENTS Sierra # O.E. # Description Contact Set Condenser

Item No.: /

Definitions found in several locations:

ROPE. Average Tensile (lbs) Average. Tensile. (lbs)

Transcription:

Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to NEMA standards and flared for easy insertion of stranded and solid wire Which Terminal/Connector to Choose?, Insulated, Insulated or erature NON-INSULATED terminals are used where there is no worry about grounding or shorting out against other wires or metal frames, or with heat shrink tubing to cover the connection after seeing that it has been made properly. Ring #6 25 75213 100 77213 1000 87213 insulated terminals are manufactured using a two-part construction; an inner lug covered with a friction fit sleeve. Generally speaking a single crimp is sufficient to make a proper connection. HIGH TEMPERATURE terminals are nickel plated and excellent for high-heat applications, able to withstand temperatures of up to 900 F (482 C). #8 25 75215 100 77215 1000 87215 NYLON insulated terminals are manufactured using a three-part construction: an inner lug, a copper sleeve, and an outer coating. The copper sleeve acts as a funnel to direct the wire properly into the lug. Generally a dual crimp is utilized one which crimps the inner lug, one which crimps the sleeve. This connection is regarded as a better design as it gives strain relief at the connection and subsequently less fatigue. Both NYLON and connections are rated at 90 C to 105 C and can be used in auto applications (12V) or AC (110V). The actual rating of each is up to 600V. Both NYLON and offer excellent protection from surrounding metal or wire contact to prevent shorting shorting out out situations. 25 75209 100 77209 1000 87209 25 75217 100 77217 1000 87217 15 75211 70 77211 1000 87211 #6 25 75219 100 77219 1000 87219 Primary & #8 25 75221 100 77221 1000 87221 15 75223 70 77223 1000 87223 #6 15 75225 70 77225 1000 87225 #8 15 75227 70 77227 1000 87227 25 75113 100 77113 1000 87113 #6 25 75115 100 77115 1000 87115 #6 S 25 75117 100 77117 1000 87117 13

continued #8 25 75119 100 77119 1000 87119 25 75121 100 77121 1000 87121 #6 25 75123 100 77123 1000 87123 Primary & #6 S 25 75125 100 77125 1000 87125 Male Female Flag #8 25 75127 100 77127 1000 87127 25 75481 100 77481 1000 87481 20 75177 80 77177 1000 87177 15 75171 70 77171 1000 87171 25 75107 100 77107 1000 87107 15 75129 70 77129 1000 87129 25 75483 100 77483 1000 87483 20 75179 80 77179 1000 87179 15 75173 70 77173 1000 87173 25 75109 100 77109 1000 87109 25 75485 90 77485 1000 87485 15 75181 70 77181 1000 87181 8 75175 35 77175 1000 87175 15 75111 70 77111 1000 87111 Seamless 25 75461 100 77461 1000 87461 25 75463 100 77463 1000 87463 15 75465 50 77465 1000 87465 14 Wire Gauge 8 5 75462 15 77462 500 87462 Wire Gauge 6 5 75464 10 77464 500 87464 Wire Gauge 4 3 75466 10 77466 500 87466

Ring 25 75229 100 77229 1000 87229 15 75231 70 77231 1000 87231 3/8 15 75233 70 77233 1000 87233 25 75241 100 77241 1000 87241 #6 25 75249 100 77249 1000 87249 3/8 15 75257 70 77257 1000 87257 5/16 15 75235 70 77235 1000 87235 15 75243 70 77243 1000 87243 #8 25 75251 100 77251 1000 87251 1/2 10 75264 25 77264 1000 87264 25 75131 100 77131 1000 87131 #6 25 75237 100 77237 1000 87237 3/8 15 75245 70 77245 1000 87245 20 75253 80 77253 1000 87253 #6 20 75261 80 77261 1000 87261 #6 25 75133 100 77133 1000 87133 #8 25 75239 100 77239 1000 87239 5/16 15 75247 70 77247 1000 87247 15 75255 70 77255 1000 87255 #8 20 75263 80 77263 1000 87263 #6 S 25 75135 100 77135 1000 87135 Primary & #8 25 75137 100 77137 1000 87137 25 75139 100 77139 1000 87139 #6 25 75141 100 77141 1000 87141 #6 S 25 75143 100 77143 1000 87143 15

Terminal continued #8 25 75145 100 77145 1000 87145 15 75147 70 77147 1000 87147 15 75149 70 77149 1000 87149 Primary & #6 15 75151 70 77151 1000 87151 Piggy Back Tap Splice Wire Gauge 18-10 5 75272 15 77272 500 87272 Snap Plugs #8 15 75153 70 77153 1000 87153 15 75274 70 77274 1000 87274 12 75269 55 77269 500 87269.156 20 75265 100 77265 1000 87265 15 75275 70 77275 1000 87275 12 75271 55 77271 500 87271 Tap Connector Moisture Resistant Gel Filled.156 15 75266 50 77266 1000 87266 20 75268 80 77268 1000 87268 8 75273 25 77273 200 87273 Wire Gauge 18-16 4 75270 25 77270 500 87270.156 20 75267 100 77267 1000 87267 Male 25 75201 100 77201 1000 87201 25 75205 100 77205 1000 87205 20 75207 80 77207 1000 87207 16 Female.110 20 75183 80 77183 1000 87183 3/16 20 75185 80 77185 1000 87185 20 75187 80 77187 1000 87187

.110 20 75189 80 77189 1000 87189 3/16 20 75191 80 77191 1000 87191 20 75193 80 77193 1000 87193 25 75195 100 77195 1000 87195 Wire Gauge 6 3 75104 10 77104 500 87104 Closed End Ring 3/8 20 75423 60 77423 1000 87423 25 75101 100 77101 1000 87101 Wire Gauge 4 2 75102 8 77102 500 87102 Wire Gauge 16-10 15 75277 70 77277 1000 87277 #6 35 75420 100 77420 1000 87420 #6 25 75410 100 77410 1000 87410 25 75103 100 77103 1000 87103 Wire Gauge 22-14 25 75276 100 77276 1000 87276 35 75421 100 77421 1000 87421 25 75411 100 77411 1000 87411 15 75105 70 77105 1000 87105 Wire Gauge 8 10 75278 50 77278 1000 87278 35 75422 100 77422 1000 87422 20 75413 75 77413 1000 87413 Primary & 3/8 15 75415 65 77415 1000 87415 20 75412 70 77412 1000 87412 15 75414 65 77414 1000 87414 3/8 15 75416 65 77416 1000 87416 1/2 15 75417 50 77417 1000 87417 17

Heavy Duty Ring Terminal 15 75441 60 77441 1000 87441 3/8 15 75443 60 77443 1000 87443 Primary & Terminal Fully Insulated Male.187 25 75492 75 77492 1000 87492 Fully Insulated Female 20 75487 80 77487 1000 87487 25 75418 100 77418 1000 87418 15 75451 60 77451 1000 87451.187 25 75494 75 77494 1000 87494 3/16 8 75155 35 77155 1000 87155 20 75489 80 77489 1000 87489 20 75419 75 77419 1000 87419 20 75491 80 77491 1000 87491 3/16 8 75159 35 77159 1000 87159 20 75493 80 77493 1000 87493 15 75453 60 77453 1000 87453 25 75401 100 77401 1000 87401 40 75490 100 77490 1000 87490 18 Flag 20 75471 70 77471 1000 87471 10 75473 50 77473 1000 87473 4 75475 17 77475 1000 87475

25 75425 100 77425 1000 87425 25 75427 100 77427 1000 87427 20 75429 75 77429 1000 87429 3 Way Splice Ring 100 77301 1000 87301 100 77307 1000 87307 100 77313 1000 87313 5 75435 20 77435 1000 87435 100 77303 1000 87303 100 77309 1000 87309 100 77314 1000 87314 100 77305 1000 87305 100 77311 1000 87311 #6 100 77315 1000 87315 Primary & #8 100 77316 1000 87316 100 77317 1000 87317 100 77318 1000 87318 #6 100 77319 1000 87319 #8 100 77321 1000 87321 100 77323 1000 87323 100 77325 1000 87325 3/8 100 77327 1000 87327 19

Ring continued 5/16 100 77329 1000 87329 #6 100 77331 1000 87331 #8 100 77333 1000 87333 Primary & 20 Female Male Flag Color Coded Wire Nuts Min: 2 #22 Ga. Max: 3 #16 Ga. 25 18120 100 18150 1000 18190 100 77335 1000 87335 100 77343 1000 87343 100 77347 1000 87347 Min: 2 #18 Ga. Max: 2 #14 Ga. 25 18220 100 18250 500 18290 100 77337 1000 87337 100 77345 1000 87345 100 77349 1000 87349 Min: 2 #14 Ga. Max: 3 #12 Ga. 25 18320 100 18350 500 18390 Part # Qty. Part # Qty. Part # Qty. 75101 25 75491 10 75245 15 75103 25 75193 25 75253 20 75105 15 75205 25 75255 15 75139 25 75229 25 75257 15 75147 15 75241 25 75271 12 75489 10 75243 15 75277 15 100 77339 1000 87339 100 77351 1000 87351 Min: 2 #14 Ga.Max: 3 #10 &1 #12 Ga. 25 18420 100 18450 250 18490 Terminal Assortment Terminal Assortment in a Plastic Storage Box Part #10077 Comes complete with 332 terminals in 18 of the most popular styles. Each part number is indexed on the reference chart for ease of identification and quick re-order.