MATERIAL SAFETY DATA SHEET

Similar documents
Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 1 MATERIAL IDENTIFICATION AND INFORMATION % OSHA PEL. Health Flammability Reactivity HMIS Hazard Code NFPA Hazard Code 2 1 1

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Low viscosity with sharp ammonia odor SPECIFIC GRAVITY (H20=1) 0.99 EVAPORATION RATE

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFTEY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

EMERGENCY PHONE : DATE PRINTED : 9/28/2009 INFORMATION PHONE : NAME OF PREPARER : AARON NUTTER

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET Screen Printing Ink MARAPROP PP Quick Identifier. Personal Protection SC

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT

[MATERIAL SAFETY DATA SHEET (MSDS)]

[MATERIAL SAFETY DATA SHEET(MSDS)]

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

CHAIN GUARD PR-500 SYNTHETIC PROOFER CHAIN LUBRICANT MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Inert Ingredients non-hazardous C Specific Gravity (H 2 0 = 1): Percent volatile by volume (%): Available.

MATERIAL SAFTEY DATA SHEET

SECTION I - PRODUCT IDENTIFICATION Silicon nitride, powder and pieces. US National Poison Hotline

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221

Safety Data Sheet (SDS) ARCOR EE-94HW ACTIVATOR

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Elecro Static Dissapative WATER EMULSION FINISH PART A

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

SAFETY DATA SHEET S415L VER 15-1 DATE: 8/17/15 SW

Safety Data Sheet SOOTHE & COOL CORNSTARCH BODY POWDER

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet REMEDY OLIVAMINE CALAZIME SKIN PROTECTANT PASTE

SAFETY DATA SHEET Porcelain Tile Cleaner. 1. Product and Company Identification. 2. Hazards Identification

*MATERIAL SAFETY DATA SHEET*

Section I. Section II - Hazardous Ingredients/Identity Information. Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Lightning Fast Wax Stripper. 1. Product and Company Identification. 2. Hazards Identification

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

Safety Data Sheet 3% U.S.P HYDROGEN PEROXIDE

SAFETY DATA SHEET. Product Name: LIQUID SEAWEED CONCENTRATE #3. Page 1 of 5. Classification of the Substance or Mixture. Label Elements.

Safety Data Sheet EPI-CLENZ FOAMING INSTANT HAND SANITIZERS

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

* Material Safety Data Sheet (MSDS)*

SAFETY DATA SHEET Dry Foam Carpet Shampoo Concentrate. 1. Product and Company Identification. 2. Hazards Identification

[MATERIAL SAFETY DATA SHEET(MSDS)]

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET


Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

SAFETY DATA SHEET Vegetable Glycerin

MATERIAL SAFETY DATA SHEET Screen Printing Ink SPEZIAL- Quick Identifier GLASFARBE GL

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4 REVISION DATE: 1/1/2010

Section I - IDENTIFICATION SEMENT PATCH SYSTEM. (407) (800) Chemtrec Section II - HAZARDOUS INGREDIENTS PEL. 0.1 mg/m 3 0.

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Safety Data Sheet MEDSPA BABY BATH

Kinetics Noise Control MATERIAL SAFETY DATA SHEET

Safety Data Sheet ARCOR S-16 ACTIVATOR

GHS SAFETY DATA SHEET (SDS)

MSDS. Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet SUREPREP NO-STING SKIN PROTECTANT

Safety Data Sheet POVIDONE IODINE SCRUB SOLUTIONS

Adhesive Structural Scotch-Weld

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

Safety Data Sheet EPI-CLENZ PLUS INSTANT HAND SANITIZERS

Disposal: Place empty container in trash. Give partial or full container to the safety officer.

24 hour Emergency Telephone Contact Number Chauvet

*********************** EMERGENCY PHONE #: ************************

1. Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Safety Data Sheet SOOTHE & COOL SKIN CREAM

Safety Data Sheet CURAD BACITRACIN OINTMENT

SECTION I - PRODUCT IDENTIFICATION Gallium oxide, powder and pieces. US National Poison Hotline

507 Rapid Set Cold Pothole Repair Material Safety Data Sheet

SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION SECTION 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Norland Index Matching Liquid 150

Transcription:

MATERIAL SAFETY DATA SHEET 384-4, CHEONG CHEON DONG, BUPYEONG-GU, INCHEON. KOREA TEL : (82-2) 2266-7722 FAX : (82-2) 2273-7225 Section 1. Manufacturer : S K S CO., LTD. Address : 384-4,CHEONG CHEON DONG,BUPYEONG-GU,INCHEON,KOREA Emergency telephone number : 82-2-2266-7722 Date : 2008. 12. 17 Prepared by Hazard Rating : 0=least, 1=slight, 2=moderate, 3=high, 4=extreme, R=chronic H = splash goggles, gloves, synthetic apron & vapor respirator Trade name Chemical name ZINKY#200M-HB MAIN LIQUID EPOXY ZINC RICH PRIMER -- HMIS -- HEALTH : 2 FLAMMABILITY : 3 REACTIVITY : 0 PERSONAL PROTECT : H Section 2-1. HAZARDOUS COMPONENTS NO. COMPONENT CAS NO. % by wt Vapor pressure ( mmhg 20 ) 1 XYLENE 1330-20-7 15 ~ 20 6.6 2 ZINC DUST 7440-66-6 70 ~ 90 N/A 3 METHYL ISOBUTHYL KETON 108-10-1 1 ~ 5 16 ( N/A = Not Applicable ) Section 2-2. OCCUPATIONAL EXPOSURE LIMITS NO. (OSHA) PEL / TWA PEL / CEILING PEL / STEL SKIN 2 5.00 mg/m 3 N/E 10.00 mg/m 3 N/E 3 50 PPM N/E 75 PPM N/E NO. (ACGIH) TLV / TWA TLV / CEILING TLV / STEL SKIN 2 N/E N/E N/E N/E 3 50 PPM N/E 75 PPM N/E 1/3 ( N/E = Not Established )

Section 3. PHYSICAL / CHEMICAL CHARACTERISTICS Boiling point N/E Specific gravity (H 2 O=1) 2.3 ± 0.1 at 25 Vapor pressure (at 20 ) N/A mmhg Melting point N/A Vapor density (Air=1) > 1 Freezing point N/A Evaporation rate (BAc=1) > 1 Percent volatile by volume 55 ± 2% Solubility in water Appearance and odor Nil All Color Liquid with solvent odor. Solubility in other solvent Solved in almost all solvents Section 4. FIRE AND EXPLOSION HAZARD DATA Flash point (Method Used) 24 ( Closed Cup ) Flammable limits (%) LEL UEL FLAMMABILITY CLASSIFICATION (OSHA) 1.1 7.0 FLAMMBLE LIQUID - CLASS IB Extinguishing media CO 2, Foam, Dry chemical, Halon (Avoid water) Special fire fighting procedures Air supplied face masks where expose to fumes occures. Unusual fire and explosion hazards Isolate from heat, electrical equipment, Sparks and opened flame. Wear Self-Contained breathing apparatus. Section 5. REACTIVITY DATA Unstable Stability Stable Incopatibility (Materials to avoid) Strong oxidizing agents Conditions to avoid contact with elevated temperatures or flame. Store below 50 Hazardous decomposition or by-products No information Hazardous May occur Polymerization Will not occur Condition to avoid Contact with Oxidizing, Strong, acid. alkalis, amine and alkanol- amines, chlorinated compound, aldehydes. 2/3

Section 6. HEALTH HAZARD DATA Route of entry Inhalation? Skin? Ingestion? Yes Yes No Health hazard (Acute and chronic) Inhalation : May cause nose and throat irritation Skin and eye contact : May cause skin irritation or burning of the eyes. Sings and symptoms of exposure Eye contact may cause irritation or burning. Medical conditions Gellerally aggravated by exposure. Emergency and first aid procedures Inhalation : Remove from exposure immediately. Use a bag valve mask or similar device to perform artificial respiration (rescue breathing) if needed. Get medical attention. Skin Contact : Remove contaminated clothing, jewelry, and shoes immediately. Wash with soap or mild detergent and large amounts of water until no evidence of chemical remains (at lest 15-20 minutes). Get medical attention, if needed. Eyes Contact : Wash eyes immediately with large amounts of water or normal saline, occasionally lifting upper and lower lids, until no evidence of chemical remains. Get medical attention immediately. Ingestion : Contact local poison control center or physician immediately. Never make an unconscious person vomit or drink fluids. When vomiting occurs, keep head lower than hips to help prevent aspiration. If person is unconscious, turn head to side. Get medical attention immediately. Note to Physician: For ingestion, consider gastric lavage. Section 7. PRECATIONS FOR SAFE HANDLING AND USE Steps to be taken in case material is released or spilled. Wash spill down with water. Waste disposal method Incinerate absorbed material in accordance with federal, state and local regulations. Precautions to be taken in handling and storing Although it is not corrosive to skin, avoid eye and skin contact. Other precautions Wash thoroughly after handling and before eating. Section 8. CONTROL MEASURES Respiratory protection (Specify type) Do not breathe mist of paint Ventilation Local exhaust Recommend Mechanical (General) Recommend Special Other Protective gloves Eye protection Other protective clothing or equipment Work/Hygienic practices Rubber gloves. Safety goggles. Eye washer, safety shower 3/3

MATERIAL SAFETY DATA SHEET 384-4, CHEONG CHEON DONG, BUPYEONG-GU, INCHEON. KOREA TEL : (82-2) 2266-7722 FAX : (82-2) 2273-7225 Section 1. Manufacturer : S K S CO., LTD. -- HMIS -- Address : 384-4,CHEONG CHEON DONG,BUPYEONG-GU,INCHEON,KOREA HEALTH : 2 Emergency telephone number : 82-2-2266-7722 FLAMMABILITY : 3 Date : 2008. 12. 17 Prepared by REACTIVITY : 0 PERSONAL PROTECT : H Hazard Rating : 0=least, 1=slight, 2=moderate, 3=high, 4=extreme, R=chronic H = splash goggles, gloves, synthetic apron & vapor respirator Trade name Chemical name HARDENER OF ZINKY#200M-HB HARDENER OF EPOXY ZINC RICH PRIMER Section 2-1. HAZARDOUS COMPONENTS NO. COMPONENT CAS NO. % by wt Vapor pressure ( mmhg 20 ) 1 XYLENE 1330-20-7 45 ~ 60 6.6 2 N-BUTHYL ALCOHOL 71-36-3 5 ~ 10 4.2 3 POLYAMIDE AMINE RESIN 68910-91-8 30 ~ 40 N/A ( N/A = Not Applicable ) Section 2-2. OCCUPATIONAL EXPOSURE LIMITS NO. (OSHA) PEL / TWA PEL / CEILING PEL / STEL SKIN 2 50 PPM 50 PPM N/E N/E 3 N/E N/E N/E N/E NO. (ACGIH) TLV / TWA TLV / CEILING TLV / STEL SKIN 2 50 PPM 50 PPM N/E Y 3 N/E N/E N/E N/E 1/3 ( N/E = Not Established )

Section 3. PHYSICAL / CHEMICAL CHARACTERISTICS Boiling point N/E Specific gravity (H 2 O=1) 1.00 ± 0.1 at 25 Vapor pressure (at 20 ) N/A mmhg Melting point N/A Vapor density (Air=1) > 1 Freezing point N/A Evaporation rate (BAc=1) > 1 Percent volatile by volume 52 ± 2 % Solubility in water Appearance and odor Nil All Color Liquid with solvent odor. Solubility in other solvent Solved in almost all solvents Section 4. FIRE AND EXPLOSION HAZARD DATA Flash point (Method Used) 30 ( Closed Cup ) Flammable limits (%) LEL UEL FLAMMABILITY CLASSIFICATION (OSHA) 1.1 7.0 FLAMMBLE LIQUID - CLASS IC Extinguishing media CO 2, Foam, Dry chemical, Halon (Avoid water) Special fire fighting procedures Air supplied face masks where expose to fumes occures. Unusual fire and explosion hazards Isolate from heat, electrical equipment, Sparks and opened flame. Wear Self-Contained breathing apparatus. Section 5. REACTIVITY DATA Unstable Stability Stable Incopatibility (Materials to avoid) Strong oxidizing agents Conditions to avoid contact with elevated temperatures or flame. Store below 50 Hazardous decomposition or by-products No information Hazardous May occur Polymerization Will not occur Condition to avoid Contact with Oxidizing, Materials, strong acide, alkalise, aldehydes, chlorinated compound. 2/3

Section 6. HEALTH HAZARD DATA Route of entry Inhalation? Skin? Ingestion? Yes Yes No Health hazard (Acute and chronic) Inhalation : May cause nose and throat irritation Skin and eye contact : May cause skin irritation or burning of the eyes. Sings and symptoms of exposure Eye contact may cause irritation or burning. Medical conditions Gellerally aggravated by exposure. Emergency and first aid procedures Inhalation : Remove from exposure immediately. Use a bag valve mask or similar device to perform artificial respiration (rescue breathing) if needed. Get medical attention. Skin Contact : Remove contaminated clothing, jewelry, and shoes immediately. Wash with soap or mild detergent and large amounts of water until no evidence of chemical remains (at lest 15-20 minutes). Get medical attention, if needed. Eyes Contact : Wash eyes immediately with large amounts of water or normal saline, occasionally lifting upper and lower lids, until no evidence of chemical remains. Get medical attention immediately. Ingestion : Contact local poison control center or physician immediately. Never make an unconscious person vomit or drink fluids. When vomiting occurs, keep head lower than hips to help prevent aspiration. If person is unconscious, turn head to side. Get medical attention immediately. Note to Physician: For ingestion, consider gastric lavage. Section 7. PRECATIONS FOR SAFE HANDLING AND USE Steps to be taken in case material is released or spilled. Wash spill down with water. Waste disposal method Incinerate absorbed material in accordance with federal, state and local regulations. Precautions to be taken in handling and storing Although it is not corrosive to skin, avoid eye and skin contact. Other precautions Wash thoroughly after handling and before eating. Section 8. CONTROL MEASURES Respiratory protection (Specify type) Do not breathe mist of paint Ventilation Local exhaust Recommend Mechanical (General) Recommend Special Other Protective gloves Eye protection Other protective clothing or equipment Work/Hygienic practices Rubber gloves. Safety goggles. Eye washer, safety shower 3/3