c Installation Instructions Conversion Kits 6014067 & 6014068 Kits 600458 & 600459 This sheet provides installation instructions and replacement parts lists for the Cascade Conversion and Kits. The kits convert earlier versions of E-Series Push/Pulls to the latest gripper assembly and gripper cylinder configuration. The gripper cylinder kits do not include a new gripper bar and bearings. 1 Fully extend the attachment faceplate. Attach an overhead hoist to the gripper assembly lifting holes. Take up slack in the chain. 3 Disconnect, tag and plug the hoses from the junction block. 4 Remove the capscrews fastening the gripper assembly to the faceplate. Remove the gripper assembly and lay it on the floor with the cylinders upward. For reassembly, tighten the capscrews to the torque values below: Hex Head Capscrews 160 ft.-lbs. (15 Nm) Flat Head Capscrews 1 ft.-lbs. (165 Nm) Extend the 1faceplate. Attach overhead hoist. Disconnect 3 hoses. PP0599.eps Part No. 6001609-R Remove gripper assembly 4 capscrews. cascadew corporation For Technical Support... To Order Parts... Call: 1-800-7-33 Fax: 1-888-39-807 Call: 1-888-7-33 Fax: 1-888-39-034 Internet: www.cascorp.com Internet: www.cascorp.com Write: Cascade Corporation, PO Box 0187, Portland, OR 9794 Write: Cascade Corporation, 501 Sheridan Ave., Springfield, OH 45505
5 Remove the gripper cylinders. 6 Remove the bearing strips from the gripper jaw if new bearings are included in the kit. For reassembly, apply waterproof chassis grease (Whitmore Omni-Task EP or NLGI grade ) to the gripper jaw and bearing strip contact surfaces during assembly. Remove bearing 6 strips 5 Remove cylinders 7 Remove the gripper pad from the gripper bar if a new gripper bar is included in the kit. 7 from Remove gripper pad gripper bar. PP0706.eps 8 Install the new cylinders and gripper bar/bearings, if included in the kit, to the gripper jaw. 8 Install the new cylinders and gripper bar/bearings if included in the kit. Jaw Bearing Bar PP0915.eps
Jaw Bearing 9 Pad Bar PP090.eps 9 Install the gripper pad to the new gripper bar if a new gripper bar is included in the kit. Tighten the capscrews to a torque of 14 ft.-lbs. (19 Nm). 10 For reassembly, reverse procedures. 3
& Conversion Kits 40 in. Wide Faceplate 1 6 4 5 3 7 PP0697.eps 6014067 Conversion Kit 1 1 600443 - RH 1 600444 - LH 3 4 60046 Collar 4 4 6014089 Clevis Pin 5 10 669894 Retaining Ring 6 686573 Bearing 7 1 600135 Bar 600458 Kit - RH (items 1 & 3-5) 600459 Kit - LH (items -5) 1 1 600443 - RH 1 600444 - LH 3 60046 Collar 4 6014089 Clevis Pin 5 6 669894 Retaining Ring 4
& Conversion Kits 60 in. Wide Faceplate 1 6 3 4 5 7 PP0704.eps 6014068 Conversion Kit 1 1 600443 - RH 1 600444 - LH 3 4 60046 Collar 4 4 6014089 Clevis Pin 5 10 669894 Retaining Ring 6 686573 Bearing 7 1 60016 Bar 600458 Kit - RH (items 1 & 3-5) 600459 Kit - LH (items -5) 1 1 600443 - RH 1 600444 - LH 3 60046 Collar 4 6014089 Clevis Pin 5 6 669894 Retaining Ring 5
Do you have questions you need answered right now? Call your nearest Cascade Service Department. Visit us online at www.cascorp.com AMERICAS Cascade Corporation U.S. Headquarters 01 NE 01st Fairview, OR 9704-9718 Tel: 800-CASCADE (7-33) Fax: 888-39-807 Cascade Canada Inc. 5570 Timberlea Blvd. Mississauga, Ontario Canada L4W-4M6 Tel: 905-69-7777 Fax: 905-69-7785 Cascade do Brasil Rua João Guerra, 134 Macuco, Santos - SP Brasil 11015-130 Tel: 55-13-105-8800 Fax: 55-13-105-8899 EUROPE-AFRICA Cascade Italia S.R.L. European Headquarters Via Dell Artigianato 1 37030 Vago di Lavagno (VR) Italy Tel: 39-045-8989111 Fax: 39-045-8989160 Cascade (Africa) Pty. Ltd. PO Box 65, Isando 1600 60A Steel Road Sparton, Kempton Park South Africa Tel: 7-11-975-940 Fax: 7-11-394-1147 ASIA-PACIFIC Cascade Japan Ltd. -3, -Chome, Kukuchi Nishimachi Amagasaki, Hyogo Japan, 661-0978 Tel: 81-6-640-9771 Fax: 81-6-640-9777 Cascade Australia Pty. Ltd. 1445 Ipswich Road Rocklea, QLD 4107 Australia Tel: 1-800-7-3 Fax: +61 7 3373-7333 Cascade Korea 11B 9L Namdong Ind. Complex, 691-8 Gojan-Dong Namdong-Ku Inchon, Korea Tel: +8-3-81-051 Fax: +8-3-81-055 Cascade New Zealand 15 Ra Ora Drive East Tamaki, Auckland New Zealand Tel: +64-9-73-9136 Fax: +64-9-73-9137 Cascade-Xiamen No. 668 Yangguang Rd. Xinyang Industrial Zone Haicang, Xiamen City Fujian Province P.R. China 36106 Tel: 86-59-651-500 Fax: 86-59-651-571 Sunstream Industries Pte. Ltd. 18 Tuas South Street 5 Singapore 637796 Tel: +65-6795-7555 Fax: +65-6863-1368 Cascade India Material Handling Private Limited No 34, Global Trade Centre 1/1 Rambaugh Colony Lal Bahadur Shastri Road, Navi Peth, Pune 411 030 (Maharashtra) India Phone: +91 00 43 5490 Fax: +91 00 433 0881 c Cascade Corporation 013 06-013 Part Number 6001609-R