SET-UP INSTRUCTIONS Includes:» 8' x 8' Quickster Net» Removable Target» Removable Ball Collection Skirt» Carry Bag» 4 Ground Stakes
WARNING: PLEASE READ! Quickster is under tension when assembled. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury. BEFORE YOU BEGIN:» Adult assembly recommended.» Make sure you have all of the Quickster components. Please contact SKLZ customer service toll free at 877-225-7275 if you are missing anything.» Read all setup and usage instructions carefully.» When done, disassemble Quickster and store after use. Do not leave Quickster outdoors.» Do not climb or hang on the Quickster.» Regularly check for wear and tear. Stop using goal if any part of it breaks. Failure to do so could result in injury.» Keep away from fire and heat sources.» Not suitable for children under 3 years of age. Tension-Tite Arm Pole (C) Net (A) QUICKSTER PARTS: Removable Full Swing & Chipping Target (E) A Net B Base Frame Base Frame (B) Removable Ball Collection Skirt (F) C Tension-Tite Arm Pole (2) D Ground Stakes (4) E Removable Full Swing and Chipping Target F Removable Ball Collection Skirt
QUICKSTER ASSEMBLY: STEP 1 BASE FRAME AND TENSION-TITE ARM POLE ASSEMBLY NOTE: Base Frame and Tension-Tite arm poles come pre-attached by elastic. Layout one Tension-Tite Arm Pole (C) and link together to form a straight pole. Repeat with second Tension-Tite Arm Pole. Layout Base Frame (B) and link the frame together. Make sure to secure the poles with the push buttons. NOTE: The slight bowing on the Base Frame is part of the Tension-Tite system design. Slide the Tension-Tite Arm Poles into each side of the Base Frame. NOTE: Ensure arm poles are fully inserted. Failure to do so may result in damage to the Quickster. B C Push Button Attachment C STEP 3 ATTACH BALL COLLECTION SKIRT (optional) Unroll Ball Collection Skirt (F) and velcro to the base of the Quickster Net. STEP 4 ATTACH FULL SWING AND CHIPPING TARGET (optional) Unfold the Target (E) and attach hook of the top strap through the loop ring of the metal pin at the top of the Tension-Tite pole, repeat on the other side. Top Attachment STEP 2 CONNECT THE NET TO THE FRAME Unfold the Net (A) and slide the metal pin at the top of the net into the top of the Tension-Tite Arm Pole. Make sure that the Quickster logo on the net is facing away from the frame. Repeat on the other side. Lift up the base pole to connect the grommets on the bottom of the net to each side of the frame. STEP 5 SECURE THE QUICKSTER TO THE GROUND Place Quickster in the desired location and ensure it is on level ground. Secure frame with included Ground Stakes. Ground Stakes can be secured with hand, foot or mallet. NOTE: Do not use Ground Stakes on the back of the base frame. Poles will bend and tension system will not function properly. NOTE: Care should be taken when pressing in the ground stakes. Poles can be bent if driven too far into the ground or hard surface. SIDE ONLY secure stakes where indicated above. CAUTION: Make sure the Quickster is secured into the ground before play. During play make sure that the Ground Stakes are secured regularly as a loose Ground Stake may cause injury. Grommet attachment NOTE: Check the frame to make sure it is securely and fully assembled with the net before securing to the ground.
STORING YOUR QUICKSTER : Remove the Pitching Target and Ball Collection Skirt (if using) fold up and place into the carry bag. Remove the Ground Stakes and place them into the carry bag. WARNING: Quickster is under tension when assembled. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury. Hold one pin in one hand and one Tension-Tite Arm Pole in the other while pulling the pin out. Repeat on the other side. Remove the Net grommets from each side of the frame. If needed, air dry the net before you fold and place it into the carry bag. Pull the Tension-Tite Arm Poles out of each side of the base frame and unlink and fold them down to store. NOTE: Store Tension-Tite Arm Pole in the carry bag with the round tops facing away from each other. Unlock the push buttons on the Base Frame to unlink the frame. Fold and store in carry bag. PERFECT FOR PRACTICE WITH: HINGED GRAPHITE TRAINING DRIVER» The only graphite hinged training club available» Golf swing flaws are immediately exposed by a break in the hinge» The graphite shaft provides a more accurate weight and feel of a real driver» Engineered to hit golf balls and teach a smooth, even-tempo golf swing» Dual-colored shaft guides an on-plane swing (keep the black top visible throughout the swing)» Grip guide provides ideal placement for your hands in order to best square the clubface» Patented, two-way adjustable-hinged driver» Includes adjustment key/divot tool HITTING MAT: TEE» FAIRWAY» ROUGH» Can be used anywhere you can swing a club» Both fairway and rough surfaces» Two tees for all range of clubs (oversized driver, fairway woods, irons)» Practice driving, iron shots and short game» Heavy-duty non-slip rubber hitting mat with realistic grass
90-DAY LIMITED WARRANTY QUICKSTER Pro Performance Sports (PPS) warrants to the original consumer purchaser of any PPS product it manufactures that the product will be free of defects in materials or workmanship for 90 days (unless specified in alternate warranties) from the date of purchase. If defective, and purchased from a retail store, return the product along with receipt to the retail store where the product was purchased. If the item was purchased from PPS, return the product along with proof of the date of purchase (i.e. the packing slip), postage prepaid to the address below for replacement consideration: Pro Performance Sports :: 5823 Newton Drive :: Carlsbad, CA 92008 :: Attn: Returns This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise. Only valid in the USA. All returns sent to PPS require a Return Merchandise Authorization number (RMA). For returns to PPS and for all other Customer Service inquiries, please call toll free: 1-877-225-7275 Register your product at to ensure warranty coverage, get new product information and special deals from SKLZ VIDEOS Like us on Facebook: facebook.com/sklzgolf Follow us on Twitter: @golfsklz DO YOU HAVE A WINNING SPORTS PRODUCT OR IDEA? Visit our website to learn how to submit a product application for consideration. It may become our next winning product! Made in China 2012 Pro Performance Sports. All rights reserved. Unauthorized duplication is a violation of applicable laws. U.S. and Foreign Patents Pending.