FILTERS PRODUCT CATALOGUE 2016 p1
AT NETAFIM WE HELP OUR CUSTOMERS PRODUCE MORE YIELDS AND BETTER CROPS WITH LESS RESOURCES. NETAFIM IS THE GLOBAL LEADER IN SMART WATER SOLUTIONS FOR AGRICULTURE AND LANDSCAPE. WE HELP THE WORLD GROW MORE WITH LESS. Our Vision As the world s leading irrigation company, we will drive mass adoption of smart irrigation to fight scarcity of food, water and land. OUR MISSION Together with our partners we will revolutionise irrigation globally for a sustainable future. We will drive mass adoption of innovative, simple and reliable drip irrigation solutions. Our teams around the world will provide our customers with the best agronomic and technical support to ensure outstanding results and peace of mind. Our values The Netafim Spirit - Doing your best with people you care about, trust and respect. Knowledge Sharing - We strive to share our decades of experience, unparalleled expertise, and innovative research and development with our employees and customers. This has resulted in proven and lasting irrigation solutions for arid conditions for our customers in all corners of the globe. Our familiarity with diverse local growing cultures and methods, together with the deep roots we have established in many different countries, create the ideal foundation for future growth. We aim to bring our wealth of knowledge and expertise to the service our customers. Quality Commitment - At Netafim, our commitment to quality knows no limits; beyond human resources, our stringent and uncompromising standards of quality extend far beyond the production floor - and are applied to every facet of our business. From polishing development procedures, to exhaustive field-testing of every product, through constant production optimization, Netafim is committed to quality long before the customer is involved. After the sale, Netafim continues its quest for customer satisfaction through exceptional technical services and support. As a business, we encourage and are committed to exceptional standards of performance, productivity and uncompromising quality, as well as being dedicated to customer service and cooperation. These mandatory requisites are the foundation upon which we build our long-term success. Netafim has implemented and maintains a Quality Management System which fulfils and exceeds the requirements of the international standard ISO 9001:2008. Continuous Learning - Curiosity, creativity and the will to embrace new ideas are the basic building blocks of Netafim s ability to keep on changing and enhancing the world s irrigation systems. In order to turn hundreds of new ideas into reliable solutions, we are committed to the policy of organisational learning. To this end, we not only provide ongoing training programs for our staff, but welcome input from every possible source - our customers, suppliers and colleagues. Ecological Awareness - As the world s population continues to rise and natural resources come under pressure, more efficiency makes more sense than ever. At Netafim we are committed to the development of smart solutions for agriculture, landscape and other applications that preserve water, reduce contamination and soil erosion, promote energy saving and allow the use of marginal lands and water sources including recycled water. We will join forces to promote and increase global food production that will bring relief to many less privileged populations. We will support universal efforts towards improving the quality of the environment and the beauty of the planet we live in. Disclaimer. We reserve the right to alter the design, or discontinue any of the company's products or services without notice. While every effort has been made to ensure the accuracy of the information contained in this publication changes or refinements may not be reflected in the following pages. If in doubt, please contact your local sales office. Copyright 2016. All rights reserved. This document may NOT be reproduced, in whole or parts, without the written permission of Netafim Australia. Specifications may change without notice. E. & O.E
Contents FILTRATION DISC filtration technology...2 LEAF DISC FILTER...4 AUTOMATIC DISC 2 Spin Klin COMPACT...6 2 Spin Klin...8 3 Spin Klin...10 3 Spin Klin Angle Apollo...12 4 Spin Klin TWIN APOLLO...14 MANUAL Manual Disc 3/4-1.1/2...20 MAnual Disc 2 dual...22 Manual Disc 2-3 Leader...24 3-4 Super Angle...26 4-6 Super LEADER...28 MANUAL SCREEN Angle f100...30 inline f200...32 series f2000...52 SEMI AUTOMATIC SCREEN Semi automatic screen FILTERS...16 compact sa500c SUCTION SCANNER...46 angle sa500s SUCTION SCANNER...48 angle sa500 brush...50 AUTOMATIC SCREEN Compact angle af200...38 af800...40 af900...42 900 SERIES ELECTRIC SCREEN SERIES...44 MEDIA SERIES f600...34 FERTILISER TANK series f500...54 HYDROCYCLONE SERIES f700...36 Sand Separator Systems...18 1
DISC filtration technology FEATURES Securely stacked discs for micron-precise filtration solids Corrosion resistant spine Innovative depth filter design captures and retains large amounts of solids for longer filtration cycles Short and Efficient backwash process conserves water and energy Easy and simple operation Long-term operation with minimal maintenance The grooves of any two adjacent discs, pressed together, create a series of crossing points which form multiple particle traps. In the filtration process, the force of the spring, along with the differential pressure, firmly compress the discs together providing exceptional filtration efficiency. Filtration occurs as water percolates from the outer diameter to the inner diameter of the filter element. Depending on the micron rating there are multiple crossing points in each track creating distinctive in-depth filtration. 2
FILTRATION PROCESS The colour coded micron sized filtration discs are stacked on the Spin Klin spine and assembled according to predetermined water filtration requirements. During filtration. The discs are compressed by means of a preloaded spring and the differential pressure, forcing the water to pass through the grooved discs surface, and thus trapping the solids. BACKWASH PROCESS Activated by a predefined time command or differential pressure setting the system enters backwash mode. The inlet valve port shuts as the drain port opens. During the backwash process, pressure is released and the spine s piston rises releasing the compression on the discs. Tangential jets of clean water are then forced through the nozzles positioned along the spine. At this stage the discs spin freely, loosening the trapped solids which are then flushed out. DIAGONALLY GROOVED DISC FILTRATION 3
LEAF DISC FILTER Low energy automatic filter (LEAF) Applications Where low pressure is required in backflow. Available in all Spin Klin and Apollo models. Advantages Energy saving The LEAF is the only filter available that starts to backwash from 1.5 Bar Proven filtration filters through the entire depth of the disc ring, not just the surface Non-corrosive, UV protected polypropylene materials resist rust and corrosion from chemicals and weather Factory assembled and tested for a quick and easy water in/water out installation Small footprint saves valuable space Advanced back flushtime optimises the overall application of irrigation water NEW LOW PRESSURE DESIGN ALLOWS FILTER BACKWASH AT ONLY 1.5 Bar Netafim Automatic Spin Klin Filters have been used successfully and reliably for many years. Our advanced disc filtration technology optimises irrigation performance and saves water. With a redesigned filter spine, the Low Energy Automatic Filter (LEAF), can now flush at a lower pressure - 1.5 Bar instead of 2.8 Bar. SAVE MONEY ON ENERGY COSTS A lower flushing pressure reduces energy costs which can result in up to 15% energy savings. SAVE MONEY BY REDUCING PUMP SIZE A lower flushing pressure reduces the need to oversize the pump for adequate flushing and reduces the need for a Pressure Sustaining Valve - saving money. 4
low energy automatic filter (LEAF) NEW LOW PRESSURE DESIGN ALLOWS FILTER BACKWASH AT ONLY 1.5 Bar 5
2 Spin Klin COMPACT Automatic Compact (stand alone) Disc Filter Applications Irrigation systems of small farm fields, municipal gardens or greenhouses. Standard characteristics Micron-precise filtration of solids Securely stacked disc for micron-precise filtration of solids Corrosive resistant spine Innovative 3 dimensional filter design captures and retains large amounts of solids for longer filtration cycles Short efficient backwash process conserves water and energy Easy and simple operation Long-term operation with minimal maintenance or cleaning WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H weight inch 130µm cm 2 cm 2 mm mm mm kg 2 COMPACT 2 14 m 3 /h 880 1148 829 295 612 20 6
Pressure loss at 120 micron 2 1.0 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 7
2 Spin Klin Automatic Disc Filter Systems applications Small areas of field crops, orchards, groves and small flow industrial applications. standard characteristics Micron-precise filtration of solids Innovative 3 dimensional filter design captures and retains large amounts of solids Long-term operation with little maintenance or cleaning Operation is easy and requires no special tools Continuous water supply during backwash The backwash cycle has a regulated volume, is short and environmentally friendly as it minimises the use of flush water and automatically cleans the filter element. This saves labour and costs by minimising maintenance and permanently eliminates the need to replace filter media Modular batteries allow for easy system expansion WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar filtration degrees 20-400 Micron 600-40 Mesh Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H Weight Inch 130µm cm 2 cm 2 mm mm mm kg 2 Units 3 30 m 3 /h 1,760 2,296 706 383 974 46 3 Units 4 45 m 3 /h 2,640 3,444 964 383 974 59 4 Units 4 60 m 3 /h 3,520 4,592 1,214 383 974 73 5 Units 4 75 m 3 /h 4,400 5,740 1,460 383 974 90 8
1.0 Pressure loss at 120 micron 2 UNITS 3 UNITS 4 UNITS 5 UNITS Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 9
3 Spin Klin Automatic Disc Filter Systems Applications Medium areas of field crops, orchards, groves and medium flow industrial applications. Standard characteristics Micron-precise filtration of solids Innovative filter design captures and retains large amounts of solids Long-term operation with little maintenance Operation is easy and requires no special tools Continuous water supply during backwash The backwash cycle has a regulated volume, is short and environmentally friendly as it minimises the use of flush water and automatically cleans the filter element. This saves labour and costs minimizes maintenance, and permanently eliminates the need to replace filter media Modular batteries allow for easy system expansion Cost effective WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar filtration degrees 20-400 Micron 600-40 Mesh Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H weight inch 130µm cm 2 cm 2 mm mm mm kg 3 Units 6 90 m 3 /h 5,280 6,888 947 865 1,291 120 4 Units 6 120 m 3 /h 7,040 9,184 1,070 865 1,291 155 5 Units 6 150 m 3 /h 8,800 11,480 1,438 865 1,291 190 6 Units 6 180 m 3 /h 10,560 13,776 1,680 865 1,291 225 * Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 10
1.0 Pressure loss at 120 micron 3 UNITS 4 UNITS 5 UNITS 6 UNITS Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 11
3 Spin Klin Angle Apollo Automatic Disc Filter Systems applications Medium - Large areas of field crops, orchards, groves and medium-high flow industrial applications. standard characteristics Micron-precise filtration of solids Long-term operation with little maintenance Operation is easy and requires no special tools Continuous water supply during backwash Unique construction, easy installation Particularly cost effective high flow module All materials which come in contact with water are polymeric WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.0 bar Filtration degrees 55-400 Micron 200-40 Mesh Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H weight inch 130µm cm 2 cm 2 mm mm mm kg 3 Units 6 120 m 3 /h 7,860 9,426 1,160 941 1,218 125 4 Units 6 160 m 3 /h 10,480 12,568 1,540 941 1,218 155 5 Units 8 200 m 3 /h 13,100 15,710 1,920 941 1,218 190 6 Units 8 240 m 3 /h 15,720 18,852 2,300 941 1,218 220 7 Units 8 280 m 3 /h 18,340 21,994 2,680 941 1,218 254 8 Units 10 320 m 3 /h 20,960 25,136 3,060 941 1,218 285 * Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 12
1.0 Pressure loss at 120 micron 3 UNITS 4 UNITS 5 UNITS 6 UNITS 7 UNITS 8 UNITS Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 13
4 Spin Klin TWIN APOLLO Automatic Disc Filter Systems applications Large scale field crops, orchards and groves. And high flow industrial applications. standard characteristics Micron-precise filtration of solids Long-term operation with little maintenance Operation is easy and requires no special tools Continuous water supply during backwash Unique construction, easy installation Particularly cost effective high flow module All materials which come in contact with water are polymeric WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.0 bar Filtration degrees 55-400 Micron 200-40 Mesh Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H weight inch 130µm cm 2 cm 2 mm mm mm kg 3 Units 8 225m 3 /h 15,840 20,592 1,734 1,531 1,810 360 4 Units 10 300m 3 /h 21,120 27,456 2,234 1,531 1,810 480 5 Units 10 375m 3 /h 26,400 34,320 2,734 1,531 1,810 605 6 Units 10 450m 3 /h 31,680 41,184 3,234 1,531 1,810 720 7 Units 12 525m 3 /h 36,960 48,048 3,734 1,531 1,830 850 8 Units 12 600m 3 /h 42,240 54,912 4,234 1,531 1,830 980 9 Units 12 645m 3 /h 47,520 61,776 4,968 1,531 1,830 1,170 10 Units 12 714m 3 /h 52,800 68,640 5,468 1,531 1,830 1,210 * Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 14
1.0 Pressure loss at 120 micron 3 UNITS 4 UNITS 5 UNITS 6 UNITS 7 UNITS 8 UNITS 9 UNITS 10 UNITS Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 15
Semi automatic screen FILTERS PSA SERIES - Polymeric applications Semi - automatic backup filter. standard characteristics Minimal maintenance Corrosion resistant Easy to open, clean and close Suitable for all commonly used fertilizers and acids Suitable for sea and brackish water, high and low ph 2-13 Polypropylene housing - excellent chemical resistance Stainless Steel screen Polypropylene Reinforced body WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE D1 D2 weight inch 130µm cm 2 mm mm kg 3 Flange Angle 3 60 m 3 /h 1,250 789 509 13.00 4 Flange Angle 4 90 m 3 /h 1,250 789 509 14.00 4 Twin Flange 4 110 m 3 /h 2,500 1,368 415 26.00 6 Twin Flange 6 140 m 3 /h 2,500 1,368 415 28.00 16
4-6 Super Leader 1.0 Pressure loss at 120 micron 3 4 4 TWIN 6 TWIN Pressure (Bar) 0.1 3-4 Angle 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 17
Sand Separator Systems MANUAL FILTERS Applications 2 Sand separator, Modular design, Batteries of 3-10. Standard characteristics High efficiency sand separation Long-term self-operated minimal maintenance Corrosion resistant Suitable for aquaculture and marine environments Suitable for Sea and Backwash water, High Low ph 2-13 WORKING PRESSURE Maximum working pressure: 10.0 bar Model in/outlet diameter MAX FLOW w1 w2 H weight inch 130µm mm mm mm kg 2 Sand Separator 2 15-25 m 3 /h 145 430 755 5.30 2 Sand Battery - 2 Units 2 30-50 m 3 /h 605 556 1,220 65.00 18
Pressure loss at 120 micron 2 1.0 Particle SIZE larger than Pressure (Bar) 0.1 150 µ 100 µ 50 µ m 3 /h 90% 85% 82% 15 Efficiency 95% 90% 85% 20 98% 95% 90% 25 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 19
Manual Disc 3/4-1.1/2 MANUAL DISC FILTERS applications Manual primary filtration and secondary backup filtration. standard characteristics Innovative filter design, micron-precise filtration of solids Operation is easy and requires no special tools Excellent corrosion resistance Long life span Polyamide housing - resistant to harsh environmental conditions Suitable for Sea and Backwash water, High Low ph 2-13 WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME H W weight inch 400-1000 µm cm 2 cm 2 mm mm kg 3/4 3/4 4 m 3 /h 160 95 144 74 0.37 1 1 6 m 3 /h 306 360 233 130 1.10 1 Super 1 8 m 3 /h 500 592 350 130 1.40 1.1/2 1.1/2 8 m 3 /h 306 360 233 130 1.30 1.1/2 Super 1.1/2 12 m 3 /h 500 592 350 130 1.50 20
3/4 1 1 Long 1 1/2 11/2 Long MANUAL FILTER SELECTION GUIDELINES (MAXimUM FLOW RATE M 3 /HR) Mesh 40-120 140 200 600 Water Quality Average Good Average Good Average Good Average Good 3/4 3 4 2.6 3.5 n/a n/a n/a n/a 1 4.5 6 3.8 5 3.2 4.2 n/a n/a 1 Long 6 8 4.9 6.5 4.2 5.6 n/a n/a 1 1/2 9 12 7.5 10 6.3 8.4 n/a n/a 1 1/2 Long 20 25 15 22 11 16 5 8 Good Quality - Municipal supply or clean, iron free bore water. Average Quality - Treated wastewater, or clear surface water (lakes and ponds, slow flowing rivers and canals). 21
MAnual Disc 2 dual MANUAL DISC FILTERS applications Manual primary filtration and secondary backup filtration. Standard characteristics Innovative filter design captures and retains Micron-precise filtration solids Corrosion resistant spine Large amounts of solids Operation is easy and requires no special tools Excellent corrosion resistance Long life span 2 Dual filter - Angle or in-line outlet options for maximum flexibility Polyamide housing - resistant to harsh environmental conditions WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L H A weight inch 400-1000 µm cm 2 cm 2 mm mm mm kg 2 Dual 2 25 m 3 /h 950 1,225 755 430 145 7.8 22
1.0 Pressure loss at 120 micron 20 µ 55 µ 100 µ 130-200 µ 400 µ Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 23
Manual Disc 2-3 Leader MANUAL DISC FILTERS Applications Manual primary filtration and secondary backup filtration. Standard characteristics Innovative filter design captures and retains large amounts of solids Micron-precise filtration solids Corrosion resistant spine Operation is easy and requires no special tools Long life span Easy to open, clean and close Suitable for all commonly used fertilizers and acids Suitable for sea and brackish water, high and low ph 2-13 Polypropylene housing - excellent chemical resistance WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W weight inch 400-1000 µm cm 2 cm 2 mm mm kg 2 Leader 2 25 m 3 /h 950 1,225 425 230 2.00 3 Leader (Flanged) 3 50 m 3 /h 1,900 2,450 742 320 8.00 * Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 24
Pressure loss at 120 micron 2 3 1.0 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 25
3-4 Super Angle MANUAL DISC FILTERS Applications Manual primary filtration and secondary backup filtration. Standard characteristics Innovative filter design captures and retains large amounts of solids Operation is easy and requires no special tools Long life span Micron-precise filtration solids Corrosion resistant spine Easy to open, clean and close Suitable for all commonly used fertilizers and acids Suitable for sea and brackish water, high and low ph 2-13 Polypropylene housing - excellent chemical resistance WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME H W weight inch 130µm cm 2 cm 2 mm mm kg 3 Super Angle (Flanged) 3 50 m 3 /h 1,852 2,223 397 280 12.55 3 Super Angle (Victaulic) 3 50 m 3 /h 1,852 2,223 397 280 11.05 4 Super Angle (Flanged) 4 60 m 3 /h 1,852 2,223 410 280 13.50 4 Super Angle (Victaulic) 4 60 m 3 /h 1,852 2,223 410 280 11.40 * Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 26
Pressure loss at 120 micron 3 4 1.0 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 27
4-6 Super LEADER MANUAL DISC FILTERS Applications Manual primary filtration and secondary backup filtration. Standard characteristics Innovative filter design captures and retains large amounts of solids Operation is easy and requires no special tools Long life span Micron-precise filtration solids Corrosion resistant spine The largest polypropylene disc filters Easy to open, clean and close Suitable for all commonly used fertilizers and acids Suitable for sea and brackish water, high and low ph 2-13 Polypropylene housing - excellent chemical resistance WORKING PRESSURE Maximum working pressure: 10.0 bar Minimum backwash pressure: 2.8 bar Model in/outlet diameter MAX FLOW FILTRATION SURFACE VOLUME L W H weight inch 130 µm cm 2 cm 2 mm mm mm kg 4 Super Leader 4 110 m 3 /h 3,704 4,446 1,185 319 28.80 6 Super Leader 6 160 m 3 /h 3,704 4,446 1,188 319 30.40 Manifold construction material options: Polypropylene, Polyester Coated, Stainless Steel. 28
Pressure loss at 120 micron 4 6 1.0 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 29
Angle f100 Manual filters Applications Manual backup filter infield, check filter media system. Standard characteristics Control filters with inlet/outlet with a 90º angle Filter element: - Stainless Steel screen AISI 316 mesh, supported by a PVC cylinder Available filtration grade: from 120 micron Filter housing construction material: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade. Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic; Threaded socket and Flange Maximum pressure: 10 Bar (145 psi) Maximum recommended working pressure: up to 8 Bar (116 psi) Operation The filters have been designed and built in accordance with the principle of water flow through the cylinder screen openings while solid particles are trapped by the screen. These particles can be easily removed by opening the cover and washing the screen manually. The drain valve is used for releasing pressure before opening for maintenance. Model in/outlet diameter MAX FLOW d1 x Y H weight INCH mm M3/HR inch mm mm mm kg 1.5 1.5 30 20 4 97 220 455 17.0 2 2 50 25 6 130 230 469 12.9 2 Long 2 50 35 6 130 255 719 17.6 3 3 75 50 6 140 270 729 23.0 4 4 100 90 8 190 325 855 34.0 6 6 150 220 10 217 480 1,308 62.0 8 8 200 360 12 262 500 1,104 77.0 10 10 250 540 14 278 610 1,179 105.0 Maximum recommended Flow Rate - 120 micron in good quality water 30
6 to 10 1.5 to 4 1.0 Pressure loss at 120 micron 1.5 2 2 Long 3 4 6 8 10 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 31
inline f200 Manual filters applications Manual backup filter infield, check filter media system. standard characteristics Filter element: - Stainless Steel screen AISI 316 mesh, supported by a PVC cylinder Available filtration grade: from 120 micron Filter housing construction material: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic; Threaded socket and Flange Maximum pressure: 10 Bar (145 psi) Maximum recommended working pressure: up to 8 Bar (116 psi) operation The filters have been designed and built in accordance with the principle of water flow through the cylinder screen openings while solid particles are trapped by the screen. These particles can be easily removed by opening the cover and washing the screen manually. The drain valve is used for releasing pressure before opening for maintenance. Model in/outlet diameter MAX FLOW d1 L L1 H weight INCH mm M 3 /HR inch mm mm mm kg 1.5 1.5 30 15 4 350 496 278 9.3 2 2 50 25 6 480 504 295 16.2 2 Long 2 50 30 6 480 726 427 22.8 3 3 75 40 6 550 717 398 31.9 4 4 100 80 8 675 881 487 43.8 6 6 150 180 10 735 1,264 817 79.2 8 8 200 300 12 830 1,072 643 108.8 10 10 250 450 14 940 1,103 745 135.0 Maximum recommended Flow Rate - 120 micron in good quality water 32
1.0 Pressure loss at 120 micron 1.5 2 2 Long 3 4 6 8 10 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 33
SERIES f600 gravel filtration system applications Provide high quality filtration solutions for water with a high contamination of organic material and algae. standard characteristics Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: VIC, Threaded socket and Flange Maximum recommended working pressure: 10 bars (145 psi) Equipped with mushroom diffusers with vertical openings Diffusion protection for screws, nuts and washers operation Water enters the filter via the inlet and spreads evenly onto the media. Solids and organic materials are trapped within the media. The clean water passes through the media and flows out via the nozzles. The back flushing process is done by shutting the inlet of the filter and allowing the water to enter from the bottom, lifting the media and releasing the solids that exit the filter through the back flush manifold. This process can be controlled automatically. Model in/outlet diameter Body Diameter Recommended Flow rate Recommended Backwash Flow rate Filtration area H H1 weight INCH Mm Inch M 3 /HR M³/Hr M² mm mm kg 12 Side 2 323 12 3.5-5 6 0.07 150 785 1,160 16 Side 2 390 16 5.3-9 10 0.12 180 870 1,175 20 Side 2 480 20 8-14 17 0.20 180 880 1,280 20 Top 2 480 20 8-14 17 0.20 180 880 1,280 24 2 610 24 13.5-20 25 0.29 180 1,160 1,285 30 3 762 30 20-30 38 0.44 300 1,070 1,197 36 3 900 36 32-44 55 0.64 300 1,110 1,242 48 Std 4 1,200 48 55-79 96 1.13 345 1,180 1,189 48 NTA 4 1,200 48 55-79 96 1.13 270 1,100 1,189 34
10 HEAD loss 12 16 20 20 TOP 24 30 36 48 Pressure (Bar) 8 6 4 2 1 5 10 50 100 500 1000 Flow (m³/hr) 35
SERIES f700 sand separators - hydrocyclone Applications Sand separator for well applications. Standard characteristics Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic; Male Threaded and Flanged Maximum recommended working pressure: 10 Bar (145 psi) Inlet is tangential to the body Equipped with anti- vacuum valve Conical rubber protection or expendable connection on the joint between hydrocyclone and the sedimentation tank Operation Water enters the hydrocyclone via the tangential inlet which creates a spiral flow along the walls of the filter. The centrifugal force separates the waste and sand particles and pushes them towards the walls of the sand separator. Those particles gravitate downwards into the sedimentation tank, while clean water moves upwards and exits through the top outlet. For the sand separator to operate correctly the head loss must remain between 2-5m. The separation efficiency is not affected by the accumulation of dirt in the sedimentation tank. The sedimentation tank is drained by opening a flush valve for a few seconds manually or automatically by timer. Model TANK FLOW RATE SEDIMENT DEPOSIT h H1 l SHIPPING WEIGHT inch LITRES L/PH Tank L MM mm mm kg 1 1 4-8 2.5 600 460 160 10 1.5 2.5 8-15 5 740 594 260 16 2 5 14-18 5 900 755 305 23 3 5 18-35 5 930 765 305 33 3 LF 5 35-45 5 930 765 305 33 3 in 4 out 60 45-72 30 1,550 1,285 465 75 4 60 60-92 120 1,765 1,495 505 98 6 150 100-150 150 1,996 1,671 605 187 6 150 144-220 220 2,300 1,940 655 230 8 300 220-330 300 2,897 2,492 705 328 36
Pressure loss at 120 micron 1 1.5 2 3 3 x 4 4 6 6 8 10 Pressure (Bar) 8 6 4 2 1 5 10 50 100 500 1000 Flow (m³/hr) 37
Compact angle af200 Automatic hydraulic screen filters APPLICATIONS Automatic filter for primary filtration or automatic back up filter Low to medium flow ranges. Standard characteristics Filter element: Stainless Steel screen AISI 316 mesh, 3 layer Available filtration: from 10 to 3000 micron Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Threaded and Flanged Maximum recommended working pressure: up to 10 bar (145 psi) Minimum operating working pressure during flushing: 1 bar (14.5 psi) Equipped with pressure gauge which indicates the pressure difference of 5m Clean screen pressure loss: up to 0.1 bar (1.45psi) Operation Automatic flushing of the fine screen is activated once the pressure differential (ΔP) in the filter reaches pre-determined value (up to 0.5 bar). During the flushing cycle the flushing valve opens pressure is released from the hydraulic piston and debris laden water is discharged through the flushing valve. Pressure in the hydraulic motor chamber and the dirt collector is significantly lowered causing the dirt collector nozzles move along and rotate thus cleaning the whole internal screen surface. The flushing cycle takes 5 to 13 seconds. The flushing valve closes at the end of the cycle pressure is reapplied to the piston, moving the nozzles back to their rest position and the filter is cleaned. During the whole process water supply is uninterrupted. Model in/outlet diameter MAX FLOW FILTRATION Effective SURFACE area X Y H L weight inch m³/hr cm 2 cm 2 mm mm mm kg AF202 2 30 1,110 679.5 220 197 507 465 43 AF202X 2 30 1,630 1,132.5 220 197 646 465 47 AF203 3 40 1,100 679.5 220 197 507 465 45 AF203X 3 50 1,630 1,132.5 220 210 641 465 48 AF204 4 80 1,630 1,132.5 220 210 641 465 50 AF204X 4 90 2,770 2,265.1 220 315 920 585 70 AF206-4 4 130 4,120 3,397.6 220 400 1,150 585 90 AF206 6 130 4,120 3,397.0 220 400 1,150 585 90 AF208-6 6 200 5,240 4,778.4 303 450 1,219 642 150 AF208 8 200 5,240 4,778.0 303 450 1,219 642 150 Maximum recommended Flow Rate - 120 micron in good quality water. 38
water quality ppm = mg/l Good < 15 Regular 15-50 Bad 50-100 1.0 Pressure loss at 120 micron 2 & 2X 3 3X 4 4X 6 (4-6) 8 (6-8) FILTRATION water quality AF202 AF202x af203 af203x af204 af204x af206 af208 2 2 X 3 3 X 4 4 x 6 8 200µ Good 25 30 40 50 80 90 130 200 200µ Regular 20 25 35 45 70 80 90 170 Pressure (Bar) 0.1 200µ Bad 15 20 25 35 40 50 70 130 100-150µ Good 25 30 40 50 80 90 130 200 100-150µ Regular 15 20 25 35 40 50 70 150 100-150µ Bad 10 15 20 25 35 45 60 120 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 39
af800 automatic hydraulic screen filters APPLICATIONS Automatic primary filter. Standard characteristics Filter element: Stainless Steel screen AISI 316 mesh, 3 layer Available filtration: 10 to 3000 micron Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic or Flanged Maximum recommended working pressure: up to 10 Bar (145 psi) Minimum operating working pressure during flushing: 2 Bar (29 psi) Equipped with an electronic control system (6V DC, 12 V DC, 24V AC) Operation The filter is equipped with a coarse screen that protects the finer screen from stones and larger particles. The coarse screen can be periodically clean manually. Automatic flushing of the fine screen is activated once the pressure differential (ΔP) in the filter reaches pre-determined value (up to 0.5 bar). During the flushing cycle the flushing valve opens pressure is released from the hydraulic piston and debris laden water is discharged through the flushing valve. Pressure in the hydraulic motor chamber and the dirt collector is significantly lowered causing the dirt collector nozzles move along and rotate thus cleaning the whole internal screen surface. The flushing cycle takes 5 to 13 seconds. The flushing valve closes at the end of the cycle pressure is reapplied to the piston, moving the nozzles back to their rest position and the filter is cleaned. During the whole process water supply is uninterrupted. 40 Model in/outlet diameter MAX FLOW FILTRATION Effective SURFACE area H L L1 L2 weight inch m³/hr cm 2 cm 2 mm MM mm mm kg AF803 3 50 3,220 2,350 545 450 1,139 1,386 110 AF804 3 80 5,780 4,530 545 900 1,535 1,782 135 AF804L 4 100 8,410 6,795 545 900 1,931 2,178 154 AF806 6 150 5,780 4,530 580 900 1,605 1,851 147 AF806L 6 160 8,410 6,795 555 900 2,001 2,247 157 AF808 8 250 5,780 4,530 579 900 1,795 2,041 168 AF808L 8 300 8,410 6,795 579 900 2,190 2,437 187 AF810 10 350 8,410 6,795 595 900 2,194 2,437 316 AF810L 10 400 8,410 6,795 700 1,100 1,960 2,405 212 AF810XLP 10 450 11,710 9,556 720 1,100 2,700 3,145 405 AF812 12 600 11,710 9,556 720 1,100 2,700 3,145 410 AF814 14 900 12,990 10,659 770 1,270 2,700 3,145 482 AF816 16 1,100 12,990 10,659 770 1,270 2,700 3,145 500 AF816XLP 16 1,500 17,020 13,930 925 1,270 2,705 3,150 695 Maximum recommended Flow Rate - 120 micron in good quality water.
1.0 Pressure loss at 120 micron AF803 AF804 AF804L AF806 AF808 AF808L AF810 AF806L AF810L AF812 AF814 AF816 AF816XLP Pressure (Bar) 0.1 0.01 10 50 100 500 1000 1500 Flow (m³/hr) 41
af900 automatic hydraulic screen filters APPLICATIONS Automatic primary filter. Standard characteristics Inlet/outlet parallel (horizontal layout). Filter housing material of construction: Carbon Steel. Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Filters are supplied with Stainless Steel screen, available in varying micron size as needed: 10-3000 µm (micron meters). Inlet/outlet can be either: Quick coupling connectors (allowing flexibility and easy assembly) Flanged Female threaded (up to 4 /100 mm diameter) Maximum recommended working pressure: up to 10 bar (145 psi). Minimum operating working pressure during flushing: 1 bar (14.5 psi). Maximum water temperature: 65 C (149 F). Clean screen pressure loss: up to 0.1 bar (1.45 psi). Control voltage: 380 V, 3 phase, 0.5 HP. Control system: PLC electric control board. A time basis backup (preset by the operator), guarantees that flushing cycle will occur even if the head loss has not reached the preset value. High pressure range: 16, 25, 40 bar (232, 362, 580 psi). High water temperature range: 95 C (203 F). Anti frost: special control system for cold climate conditions. Electric current: 110 V, 220 V, single phase, 3 phase, 24 V and solar energy. Material of construction: SST - 304, 316, 904, Duplex and Titanium. Available controllers: electronics, timer, air actuated, computerized and custom design. Filter with vertical layout without coarse screen, inlet/outlet on an axis of 90. Filter with vertical layout inlet/outlet on an axis of 180, with/without coarse screen. Adjustable nozzles for filtration degree lower than 50 micron. Operation The filter is equipped with a coarse screen that protects the finer screen from stones and larger particles. The coarse screen can be periodically clean manually. Automatic flushing of the fine screen is activated once the pressure differential (ΔP) in the filter reaches pre-determined value (up to 0.5 bar). During the flushing cycle the flushing valve opens pressure is released from the hydraulic piston and debris laden water is discharged through the flushing valve. Pressure in the hydraulic motor chamber and the dirt collector is significantly lowered causing the dirt collector nozzles move along and rotate thus cleaning the whole internal screen surface. The flushing cycle takes 5 to 13 seconds. The flushing valve closes at the end of the cycle pressure is reapplied to the piston, moving the nozzles back to their rest position and the filter is cleaned. During the whole process water supply is uninterrupted. 42
Pressure loss at 120 micron 1.0 AF903PR AF904PR AF906PR AF908PR AF910PR AF912PR AF914PR AF916PR Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) Model in/outlet diameter MAX FLOW SCREEN AREA EFFECTIVE DIMENSION FLUSHING FLOW RATE L W H weight Inch m³/hr cm 2 MM 2 m³/hr mm MM mm kg AF903PR 3 50 3,220 2,350 10 2,130 780 870 178 AF904PR 4 80 4,500 3,555 10 2,340 780 870 208 AF906PR 6 180 6,330 5,064 10 2,440 890 1,080 406 AF908PR 8 350 7,030 3,553 10 2,440 890 1,080 500 AF910PR 10 450 8,970 7,063 10 2,950 900 1,080 640 AF912PR 12 600 10,920 8,626 10 3,150 930 1,100 705 AF914PR 14 850 11,760 9,290 10 3,150 1,100 1,230 1,052 AF916PR 16 1,100 14,310 11,305 10 3,200 1,100 1,230 1,164 AF916XLOPR 16 1,500 17,020 13,930 10 3,550 1,130 1,230 1,359 Maximum recommended Flow Rate - 120 micron in good quality water. 43
900 SERIES ELECTRIC SCREEN SERIES VERTICAL & Horizontal Automatic ELECTRIC screen filters Applications Automatic self cleaning suction electric types, specially designed for very high flows up to 14,000 m³/hr. Standard characteristics Inlet/outlet parallel, on an axis of 90 or 180 Filters are supplied with a three layer stainless steel screens, available in varying micron sizes as needed: 10 to 3000 micron Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Maximum recommended working pressure: up to 16 bar (230 psi) Minimum operating working pressure during flushing: 2.5 bar (36 psi) Maximum water temperature: 65 C (149 F) Clean screen pressure loss: up to 0.1 Bar (1.45 psi) Minimum flushing flow (3 valve): 30 m³/h, (120 gpm) Filters are from 6-54 diameter SPECIAL CHARACTERISTICS High pressure range: 16, 25, 40 bar (232, 362, 580 psi) High water temperature range: 95 C (203 F) Electric current: 110 V, 220 V, single phase, 3 phase, 24 V and solar energy Available controllers: electronics, timer, air actuated, computerized and custom design Filter with vertical layout without coarse screen, inlet/outlet on an axis of 90 Filter with vertical layout inlet/outlet on an axis of 180, with/without coarse screen Adjustable nozzles for filtration degree lower than 50 micron MODEL IN/OUT DIAMETER MAX FLOW RATE SURFACE AREA EFFECTIVE AREA L L1 L2 INCH M³/HR CM 2 CM 2 MM MM MM AF906 HORIZONTAL 6 150 5,780 4,530 900 1,410 2,145 AF908 HORIZONTAL 8 160 8,410 6,795 900 1,560 2,295 AF910 HORIZONTAL 10 450 11,710 9,556 1,100 1,934 2,669 AF912 HORIZONTAL 12 600 11,710 9,556 1,100 1,934 2,669 AF914 HORIZONTAL 14 900 12,990 10,659 1,270 2,095 2,830 AF916 HORIZONTAL 16 1,100 12,990 10,656 1,270 2,095 2,830 AF916XLP HORIZONTAL 16 1,500 17,020 13,930 1,270 2,675 3,415 44
H Pressure loss at 120 micron D 14 14 970 1.0 H1 H2 Pressure (Bar) 0.1 0.01 10 50 100 500 1000 5000 10000 Flow (m³/hr) MODEL IN/OUT DIAMETER MAX FLOW RATE SURFACE AREA EFFECTIVE AREA H H1 H2 NUMBER OF SCREENS INCH M³/HR CM 2 CM 2 MM MM MM AF914 VERTICAL 14 900 12,990 10,659 1,270 2,095 2,830 1 AF916 VERTICAL 16 1,100 12,990 10,656 1,270 2,095 2,830 1 AF916XLP VERTICAL 16 1,500 17,020 13,930 1,270 2,675 3,415 1 AF970 VERTICAL 20 2,300 34,040 27,860 3,461 760 1,460 2 AF 1200 VERTICAL 32 5,250 68,080 55,720 3,561 860 1,560 4 AF1400 VERTICAL 36 7,000 10,2120 83,580 3,600 900 1,600 6 45
compact sa500c SUCTION SCANNER semi-automatic SUCTION SCANNER SCREEN FILTERS applications Semi - automatic filter. standard characteristics Filter element: Stainless Steel screen AISI 316 mesh, 3 layer Available filtration: from 120 micron Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic; Threaded socket and Flanged Maximum recommended working pressure: up to 10 bar (145 psi) Minimum operating working pressure during flushing: 1 Bar (14.5 psi) Equipped with a mechanical DP which indicates when the pressure difference of 5m is exceeded Clean screen pressure loss: up to 0.1 Bar (1.45psi) Operation Water flows through the inlet along and through the cylindrical screen trapping the solids on the screen. The filter can be manually cleaned while still pressurized and without removing the screen. The operator cleans the screen by opening the flush valve and turning the handle, fully up and the back down. As a result the suction nozzles traverse the entire screen removing trapped debris. The whole process takes a few seconds. Model FILTRATION in/outlet diameter MAX FLOW SURFACE EFFECTIVE AREA valve X Y H weight mm inch m³/hr Cm 2 Cm 2 inch mm MM mm kg SA502C 50 2 25 1,135 908 1/2 123 174 590 12 SA503C 75 3 45 2,363 1,891 3/4 139 189 782 22 SA504C 100 4 80 2,363 1,891 1 190 280 933 30 Maximum recommended Flow Rate - 120 micron in good quality water 46
Pressure loss at 120 micron 2 3 4 1.0 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 47
angle sa500s SUCTION SCANNER semi-automatic SUCTION SCANNER screen filters DESCRIPTION Semi - automatic filter. Standard characteristics Filter element: Stainless Steel screen AISI 316 mesh, 3 layer Available filtration: from 120 micron Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic and Flanged Maximum recommended working pressure: up to 10 bar (145 psi) Minimum operating working pressure during flushing: 1 Bar (14.5 psi) Equipped with pressure gauge which indicates the pressure difference of 5m Clean screen pressure loss: up to 0.1 Bar (1.45psi) Operation Water flows through the inlet along and through the cylindrical screen trapping the solids on the screen. The filter can be manually cleaned while still pressurized and without removing the screen. The operator cleans the screen by opening the flush valve and turning the handle, fully up and the back down. As a result the suction nozzles traverse the entire screen removing trapped debris. The whole process takes a few seconds. Model FILTRATION Inlet/outlet diameter MAX FLOW SURFACE EFFECTIVE AREA X Y H inch m³/hr cm 2 cm 2 mm mm mm SA504S 4 80 3,275 2,620 240 350 833 SA506S 6 150 4,674 3,740 240 450 1,165 SA508S 8 250 6,070 4,856 240 550 1,360 SA510S 10 500 7,482 5,985 250 1100 1,150 SA512S 12 600 12,142 9,713 280 1250 1,765 SA514S 14 750 18,213 14,370 315 1470 1,985 Maximum recommended Flow Rate - 120 micron in good quality water Backwash flow: 176 gpm (40 m³/hr) 48
14 12 10 Pressure loss at 120 micron 1.0 4 6 8 Pressure (Bar) 0.1 0.01 10 50 100 200 250 300 400 500 1000 Flow (m³/hr) 49
angle sa500 brush semi-automatic BRUSH screen filters DESCRIPTION Semi - automatic filter. Standard characteristics Filter element: Stainless Steel screen AISI 316 mesh, 3 layer Available filtration: from 120 micron Filter housing material of construction: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade. Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic and Flanged Maximum recommended working pressure: up to 10 bar (145 psi) Minimum operating working pressure during flushing: 1 Bar (14.5 psi) Equipped with pressure gauge which indicates the pressure difference of 5m Clean screen pressure loss: up to 0.1 Bar (1.45psi) Operation Water flows through the inlet and through the cylindrical screen trapping the solids on the screen. The filter can be manually cleaned while still pressurized and without removing the screen. The operator cleans the screen by opening the flush valve and turning the handle, fully up and the back down. As a result the brushes traverse the entire screen removing trapped debris. The entire process lasts for just a few seconds. Model Inlet/outlet diameter MAX FLOW X X1 Y H weight inch m³/hr mm MM mm mm kg SA504B 4 80 237 240 350 833 83 SA606B 6 150 237 240 450 1,038 102 SA508B 8 250 237 240 550 1,265 119 SA510B 10 500 250 735 1,100 1,293 229 SA512B 12 600 280 770 1,250 1,765 262 SA514B 14 750 315 960 1,420 1,735 353 Maximum recommended Flow Rate - 120 micron in good quality water Backwash flow: 176 gpm (40 m³/hr) 50
Pressure loss at 120 micron 1.0 4 B 6 B 8 B 10 B 12 B 14 B Pressure (Bar) 0.1 0.01 10 50 100 200 250 300 400 500 1000 Flow (m³/hr) 51
series f2000 manual filters applications To protect pumps and water meters from suspended solids in water. standard characteristics Filter element: Single perforated screen Stainless Steel AISI 316 Available filtration grade: 3000 micron and up Filter housing construction material: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: Victaulic; Threaded socket and Flange Maximum recommended working pressure: up to 10 Bar (145 psi) operation The filters have been designed and built in accordance with the principle of water flow through the screen openings while solid particles are collected at the lower section of the filter. These particles can be easily removed by drainage through a relatively large drain valve or by opening the cover and washing the screen manually. Model Inlet/outlet diameter MAX FLOW D X L H H1 weight inch m ³ /hr INCH MM MM mm mm kg F2002 2 20 6 50 330 560 292 35 F2003 3 40 6 80 330 560 292 40 F2004 4 65 6 100 330 580 292 45 F2006 6 150 8 150 420 610 292 65 F2008 8 260 10 200 515 665 294 95 F2010 10 400 12 250 565 715 334 120 F2012 12 580 14 300 655 795 336 170 F2014 14 700 16 350 710 825 378 220 F2016 16 880 18 400 760 870 400 275 F2018 18 1,150 20 450 810 890 392 350 F2020 20 1,450 24 500 980 950 417 575 F2024 24 2,000 28 600 1,080 1,115 503 670 Maximum recommended Flow Rate - 120 micron in good quality water 52
X D D1 H1 H Pressure loss at 100 micron 2 4 6 8 10 12 14 16 18 1.0 20 24 Pressure (Bar) 0.1 0.01 1 5 10 50 100 500 1000 Flow (m³/hr) 53
series f500 fertilising tank Applications Fertiliser tanks for use in agricultural applications. Standard characteristics Body of strainer and connections: Carbon Steel ST37.2 Pre-treatment: sand blasting up to Sa 2.5 grade Available filtration: 50-3000 micron Two layered coating process consisting of a one primary coating Rich Zinc (60-70µm thickness) and a final protective coating of Phenolic Epoxy (70-80µm thickness) Connections: quick connection Available tank volumes: 20, 30, 60, 90, 120, 220 litres Installation: horizontal or vertical Maximum operating working pressure: up to 8 Bar (116 psi) Fertiliser tanks require no external energy source to function, other than a pressure differential across the inlet and outlet. The oversized pouring mouth reduces the chance of wasted fertilizer during tank filling Flexible and durable rubber joint, highly resistant to corrosion from chemicals used in agriculture Operation The fertiliser tanks are simple to use and maintain. A pressure differential between the inlet and outlet connections, creates flow into the tank, displacing chemical from the tank via the outlet and into the mains. MODEL Installation D Volume h l weight Inch Litre mm mm kg 16 Vertical 16 20 525 406 18 16 Vertical 16 30 600 406 23 60 Vertical 20 60 690 495 29 90 Vertical 20 90 831 497 37 120 Vertical 20 120 1,010 495 41 120 Horizontal 20 120 740 743 42 200 Horizontal 20 220 735 1,323 51 200 Vertical 25 220 1,013 610 60 300 Horizontal 25 300 970 1,510 115 Maximum recommended Flow Rate - 120 micron in good quality water 54
Model F515 - F550 & F570V Model F560 & F580 Approximate fertilisation time (minutes) Pressure loss in/outlet tank capacity BAR 60 Litres 90 Litres 120 Litres 220 Litres 0.05 60-75 105-120 120-135 225-270 0.10 45-60 75-90 90-120 150-165 0.20 30-45 45-60 60-90 105-135 0.40 20-30 30-45 45-75 75-90 55
NETAFIM AUSTRALIA 213-217 Fitzgerald Road Laverton, VIC 3026 Tel: 03 8331 6500 Fax: 03 9369 3865 Email: au.net.info@netafim.com NETAFIM NEW ZEALAND 74 Westney Road Mangere, Auckland NZ Tel: 09 256 2551 fax: 09 256 2552 email: nz.auckland@netafim.com WWW.NETAFIM.COM.AU WWW.NETAFIM.CO.NZ FILTER CATALOGUE 2016 JULY 2016