MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 0 2 0 A May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY (AS USED ON LABEL AND LIST): GREEN STUFF U.S. Department of Labor Occupational Safety and Health Administrator (Non-Mandatory Form) Form Approved OMB No. 1218-0072 NOTE: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Section I Manufacturer s Name: JOMAR GROUP Address (Number, Street, City, State, and ZIP Code): 7243 MILLER DRIVE Emergency Telephone Number: Telephone Number for Information: SUITE 100 Date Prepared: August 27, 2013 WARREN, MI 48092 Signature of Preparer (optional): Section II - Ingredients/Identity Information HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY: COMMON NAME(S) OSHA PEL ACGIH TLV OTHER LIMITS Recommended % (optional) MAGNESIUM SILICATE [CAS# 14807-96-6] 35-40 HYDROUS MAGNESIUM SILICATE [CAS# 14807-96-6] 15-20 VEGETABLE OIL [CAS# 68187-84-8] 18-24 BUTYL CELLOSOLVE [CAS# 111-76-2] 12-17 ISOPROPANOL [CAS# 67-63-0] 10-15 Section III - Physical/Chemical Characteristics Boiling Point: 180 EF Specific Gravity (H20 =1): 1.41 Vapor Pressure (mm Hg):.88 Melting Point: Vapor Density (AIR = 1): > 1 Evaporation Rate (Butyl Acetate = 1): 0.6 Solubility in Water: SLIGHT Appearance and Odor: GREEN PASTE - MILD ODOR Section IV - Fire and Explosion Hazard Data Flash Point (Method Used): 82F (28C) ASTM METHOD D93-80 Flammable Limits: 921F (494C) IGNITION TEMPERATURE LEL: 1.1% UEL: 10.6%. Extinguishing Media: CARBON DIOIDE OR DRY CHEMICAL OR WATER. Special Fire Fighting Procedures: NONE Unusual Fire and Explosion Hazards: CONTACT WITH STRONG OIDIZERS MAY CAUSE FIRES OR EPLOSIONS. CARBON MONOIDE MAY BE RELEASED. Page 1
Section V - Reactivity Data JOMAR GIMME the GREEN STUFF Stability: Unstable: Stable: Conditions to Avoid: Incompatibility (Materials to Avoid): LIQUID OYGEN SYSTEMS, LIQUID SODIUM, GASEOUS FLUORINE, STRONG OIDIZERS. Hazardous Decomposition or Byproducts: Hazardous Polymerization: May Occur: Will Not Occur: Conditions to Avoid: Section VI - Health Hazard Data Route(s) of Entry: Inhalation? YES Skin? YES Ingestion? YES Health Hazards (Acute and Chronic): NONE Carcinogenicity: NTP? NO IARC Monographs? NO OSHA Regulated? NO Signs and Symptoms of Exposure: INHALATION: POSSIBLE DIZZINESS IF USED IN CONFINED AREA. SKIN: MAY CAUSE MILD IRRITATION TO SENSITIVE SKIN. Medical Conditions Generally Aggravated by Exposure: NONE KNOWN Emergency and First Aid Procedures: EYE CONTACT: FLUSH EYES WITH WATER. SKIN: WASH EPOSED AREA WITH SOAP AND WATER. WASH CLOTHING BEFORE REUSE. INHALATION: MOVE TO WELL VENTILATED AREA. INGESTION: CONSULT A PHYSICIAN. Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled: NORMAL GOOD HOUSEKEEPING PROCEDURES. Waste Disposal Method: DISPOSAL TO BE DONE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS. Precautions to Be Taken in Handling and Storing: STORE AWAY FROM HEAT OR OPEN FLAME. CLOSE CONTAINER AFTER USE. Other Precautions: WEAR PROTECTIVE GLOVES TO PREVENT POSSIBLE SKIN ABSORPTION AND DERMATITIS. KEEP OUT OF REACH OF CHILDREN. Section VIII - Control Measures Respiratory Protection (Specify Type): AVOID BREATHING OF FUMES. IF USED IN CONFINED AREA, A RESPIRATOR MAY BE NECESSARY. Ventilation: Local Exhaust: NORMAL VENTILATION IS ADEQUATE. Mechanical (General): Special: Other: Protective Gloves: MAY BE NECESSARY FOR SENSITIVE SKIN. Eye Protection: KEEP OUT OF EYES. WEAR PROTECTIVE GOGGLES WHERE NECESSARY. Other Protective Clothing or Equipment: Work/Hygienic Practices: WASH UP WITH SOAP AND WATER AFTER USE. Page 2
MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 2 1 1 B May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY (AS USED ON LABEL AND LIST): HI-TEMP U.S. Department of Labor Occupational Safety and Health Administrator (Non-Mandatory Form) Form Approved OMB No. 1218-0072 NOTE: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Section I Manufacturer s Name: JOMAR GROUP Address (Number, Street, City, State, and ZIP Code): 7243 MILLER DRIVE Emergency Telephone Number: Telephone Number for Information: SUITE 100 Date Prepared: August 27, 2013 WARREN, MI 48092 Signature of Preparer (optional): Section II - Hazardous Ingredients/Identity Information HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY: COMMON NAME(S) GREASE [CAS#64742-53-5, #7620-77-1, #1338-24-5 MITURE] OSHA PEL ACGIH TLV OTHER LIMITS Recommended 5 mg/m³ 5 mg/m³ % (optional) OIL [CAS#64742-52-5] 5 mg/m³ 5 mg/m³ TALC [CAS#14807-96-6] 2 mg/m³ 2 mg/m³ COPPER [CAS#7440-50-8, 57-11-4] 0.1 mg/m³ 0.2 mg/m³ LIME [CAS#1305-78-8] 5 mg/m³ 2 mg/m³ PROPRIETARY BLEND [CAS# PROPRIETARY] Section III - Physical/Chemical Characteristics Boiling Point: 750 F Specific Gravity (H20 =1): 1.2 Vapor Pressure (mm Hg): Melting Point: Vapor Density (AIR = 1): > 1 Evaporation Rate (Butyl Acetate = 1): NEGLIGIBLE Solubility in Water: NEGLIGIBLE Appearance and Odor: COPPER COLORED SEMI-SOLID: OIL/GREASE ODOR Section IV - Fire and Explosion Hazard Data Flash Point (Method Used): MINIMUM 385 F (PMCC) Flammable Limits: LEL: UEL: Extinguishing Media: DRY CHEMICAL, CARBON DIOIDE, WATER FOG, FOAM OR ALCOHOL FOAM. Special Fire Fighting Procedures: USE FULL BODY PROTECTIVE CLOTHING AND FULL FACE PIECE, SELF-CONTAINED BREATHING APPARATUS OPERATED IN A POSITIVE PRESSURE MODE. Unusual Fire and Explosion Hazards: PRODUCT FUME, VAPOR, AND/OR DUST MAY BE TOIC AND/OR RESPIRATORY IRRITANTS. Page 1
Section V - Reactivity Data JOMAR HI-TEMP Stability: Unstable: Stable: Conditions to Avoid: Incompatibility (Materials to Avoid): STRONG OIDIZERS AND THIS PRODUCT MAY LIBERATE HYDROGEN GAS Hazardous Decomposition or Byproducts: CO, CO2, AND OYGENATES MAY BE FORMED DURING COMBUSTION. HIGH TEMPERATURES MAY CAUSE METAL-FUME. Hazardous Polymerization: May Occur: Will Not Occur: Conditions to Avoid: Section VI - Health Hazard Data Route(s) of Entry: Inhalation? YES Skin? YES Ingestion? YES Health Hazards (Acute and Chronic): ACUTE: IF LEFT UNTREATED: WEAKNESS, VOMITING, LOSS OF APPETITE, UNCOORDINATED BODY MOVEMENTS, CONVULSIONS, STUPOR AND POSSIBLE COMA. PRODUCT MIST: MAY CAUSE IRRITATION OF RESPIRATORY TRACT. CHRONIC: WEAKNESS, INSOMNIA, SLIGHT IRRITATION TO SKIN AND EYES. METALLIC TASTE IN MOUTH, ANEMIA, CONSTIPATION, HEADACHE, MUSCLE AND JOINT PAINS. NEUROMUSCULAR DYSFUNCTION. POSSIBLE PARALYSIS, AND ENCEPHALOPATHY. PROLONGED AND REPEATED CONTACT WITH THE PRODUCT MAY CAUSE A DEFATTING ACTION OF THE SKIN. DERMATITIS AND/OR ACNE. Carcinogenicity: NTP? NO IARC Monographs? NO OSHA Regulated? NO Signs and Symptoms of Exposure: SKIN CONTACT: GREASE, DUST, VAPOR, AND/OR FUME MAY CAUSE IRRITATION. INHALATION: MIST, DUST, VAPOR, AND/OR FUME MAY BE IRRITATING TO RESPIRATORY SYSTEM AND CAN CAUSE IRRITATION. INGESTION: CAN BE ABSORBED BY THE DIGESTIVE SYSTEM AND RESULT IN ACUTE AND CHRONIC OVEREPOSURE. Medical Conditions Generally Aggravated by Exposure: RESPIRATORY DISEASES, DERMATITIS, LIVER RELATED DISEASES OR CONDITIONS, KIDNEY AND CENTRAL NERVOUS SYSTEM RELATED. Emergency and First Aid Procedures: EYES: FLUSH WITH COPIOUS QUANTITIES OF WATER. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: PROMPTLY WIPE OFF MATERIAL AND WASH THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE FROM EPOSURE. GET MEDICAL ATTENTION IF EPERIENCING EFFECTS OF OVEREPOSURE. INGESTION: GET MEDICAL ATTENTION IMMEDIATELY. DO NOT INDUCE VOMITING. Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled: SCOOP UP ECESS. CLEANSE AREA WITH APPROPRIATE CLEANER. MATTER SHOULD BE STORED IN DRY CONTAINERS FOR LATER DISPOSAL. DO NOT USE COMPRESSED AIR OR DRY SWEEPING AS A MEANS OF CLEANING. Waste Disposal Method: DISPOSE OF TOIC SUBSTANCES AND HAZARDOUS WASTE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS. Precautions to Be Taken in Handling and Storing: STORE IN COOL, DRY PLACE. CLOSE CONTAINER WHEN NOT IN USE. AVOID REPEATED CONTACT WITH SKIN. KEEP OUT OF REACH OF CHILDREN. Other Precautions: THIS PRODUCT IS INTENDED FOR INDUSTRIAL USE ONLY. Section VIII - Control Measures Respiratory Protection (Specify Type): AS SPECIFIED BY 29CFR1910.1025 (f) AND 29CFR1910.134 OF OSHA STANDARDS. Ventilation: Local Exhaust: SEE ABOVE Special: Mechanical (General): SEE ABOVE Other: Protective Gloves: RUBBER GLOVES Eye Protection: FACE SHIELD OR VENTED GOGGLES. Other Protective Clothing or Equipment: COVERALLS SHOULD BE WORN WHEN USING THIS PRODUCT. Work/Hygienic Practices: LAUNDER CONTAMINATED CLOTHING. DISPOSE OF CONTAMINATED LEATHER CLOTHING. Page 2
MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 0 2 0 A May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY (AS USED ON LABEL AND LIST): THE HEAVYWEIGHT U.S. Department of Labor Occupational Safety and Health Administrator (Non-Mandatory Form) Form Approved OMB No. 1218-0072 NOTE: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Section I Manufacturer s Name: JOMAR GROUP Address (Number, Street, City, State, and ZIP Code): 7243 MILLER DRIVE Emergency Telephone Number: Telephone Number for Information: SUITE 100 Date Prepared: August 27, 2013 WARREN, MI 48092 Signature of Preparer (optional): Section II - Hazardous Ingredients/Identity Information HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY: COMMON NAME(S) OSHA PEL ACGIH TLV OTHER LIMITS Recommended % (optional) ISOPROPANOL [CAS#67-63-0] 400 ppm 400 ppm 8-13% BUTYL CELLOSOLVE [CAS#111-76-2] 50 ppm 25 ppm 20-25% Section III - Physical/Chemical Characteristics Boiling Point: 180 F Specific Gravity (H20 =1): 1.41 Vapor Pressure (mm Hg):.88 Melting Point: Vapor Density (AIR = 1): > 1 Evaporation Rate (Butyl Acetate = 1): 0.6 Solubility in Water: SLIGHT Appearance and Odor: WHITE PASTE - MILD ODOR Section IV - Fire and Explosion Hazard Data Flash Point (Method Used): 82 F (28 C) ASTM METHOD D93-80 Flammable Limits: 921 F (494 C) IGNITION TEMPERATURE LEL: 1.1% UEL: 10.6% Extinguishing Media: CARBON DIOIDE OR DRY CHEMICAL OR WATER. Special Fire Fighting Procedures: NONE Unusual Fire and Explosion Hazards: CONTACT WITH STRONG OIDIZERS MAY CAUSE FIRES OR EPLOSIONS. CARBON MONOIDE MAY BE RELEASED. Page 1
Section V - Reactivity Data JOMAR THE HEAVYWEIGHT Stability: Unstable: Stable: Conditions to Avoid: Incompatibility (Materials to Avoid): LIQUID OYGEN SYSTEMS, LIQUID SODIUM, GASEOUS FLUORINE, STRONG OIDIZERS. Hazardous Decomposition or Byproducts: Hazardous Polymerization: May Occur: Will Not Occur: Conditions to Avoid: Section VI - Health Hazard Data Route(s) of Entry: Inhalation? YES Skin? YES Ingestion? YES Health Hazards (Acute and Chronic): NONE Carcinogenicity: NTP? NO IARC Monographs? NO OSHA Regulated? NO Signs and Symptoms of Exposure: INHALATION: POSSIBLE DIZZINESS IF USED IN CONFINED AREA. SKIN: MAY CAUSE MILD IRRITATION TO SENSITIVE SKIN. Medical Conditions Generally Aggravated by Exposure: NONE KNOWN. Emergency and First Aid Procedures: EYE CONTACT: FLUSH EYES WITH WATER. SKIN: WASH EPOSED AREA WITH SOAP AND WATER. WASH CLOTHING BEFORE REUSE. INHALATION: MOVE TO WELL VENTILATED AREA. INGESTION: CONSULT A PHYSICIAN. Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled: NORMAL GOOD HOUSEKEEPING PROCEDURES. Waste Disposal Method: DISPOSAL TO BE DONE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS. Precautions to Be Taken in Handling and Storing: STORE AWAY FROM HEAT OR OPEN FLAME. CLOSE CONTAINER AFTER USE. Other Precautions: WEAR PROTECTIVE GLOVES TO PREVENT POSSIBLE SKIN ABSORPTION AND DERMATITIS. KEEP OUT OF REACH OF CHILDREN. Section VIII - Control Measures Respiratory Protection (Specify Type): AVOID BREATHING OF FUMES. IF USED IN A CONFINED AREA, A RESPIRATOR MAY BE NECESSARY. Ventilation: Local Exhaust: NORMAL VENTILATION IS ADEQUATE. Mechanical (General): Special: Other: Protective Gloves: MAY BE NECESSARY FOR SENSITIVE SKIN. Eye Protection: KEEP OUT OF EYES. WEAR PROTECTIVE GOGGLES WHERE NECESSARY. Other Protective Clothing or Equipment: Work/Hygienic Practices: WASH UP WITH SOAP AND WATER AFTER USE. Page 2
MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 0 2 0 A May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY (AS USED ON LABEL AND LIST): WHITE STUFF U.S. Department of Labor Occupational Safety and Health Administrator (Non-Mandatory Form) Form Approved OMB No. 1218-0072 NOTE: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Section I Manufacturer s Name: JOMAR GROUP Address (Number, Street, City, State, and ZIP Code): 7243 MILLER DRIVE Emergency Telephone Number: Telephone Number for Information: SUITE 100 Date Prepared: August 27, 2013 WARREN, MI 48092 Signature of Preparer (optional): Section II - Hazardous Ingredients/Identity Information HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY: COMMON NAME(S) OSHA PEL ACGIH TLV OTHER LIMITS Recommended % (optional) ISOPROPANOL [CAS#67-63-0] 400 ppm 400 ppm 8-13% BUTYL CELLOSOLVE [CAS#111-76-2] 50 ppm 25 ppm 20-25% Section III - Physical/Chemical Characteristics Boiling Point: 180 F Specific Gravity (H20 =1): 1.41 Vapor Pressure (mm Hg):.88 Melting Point: Vapor Density (AIR = 1): > 1 Evaporation Rate (Butyl Acetate = 1): 0.6 Solubility in Water: SLIGHT Appearance and Odor: WHITE PASTE - MILD ODOR Section IV - Fire and Explosion Hazard Data Flash Point (Method Used): 82 F (28 C) ASTM METHOD D93-80 Flammable Limits: 921 F (494 C) IGNITION TEMPERATURE LEL: 1.1% UEL: 10.6% Extinguishing Media: CARBON DIOIDE OR DRY CHEMICAL OR WATER. Special Fire Fighting Procedures: NONE Unusual Fire and Explosion Hazards: CONTACT WITH STRONG OIDIZERS MAY CAUSE FIRES OR EPLOSIONS. CARBON MONOIDE MAY BE RELEASED. Page 1
Section V - Reactivity Data JOMAR GIMME the WHITE STUFF Stability: Unstable: Stable: Conditions to Avoid: Incompatibility (Materials to Avoid): LIQUID OYGEN SYSTEMS, LIQUID SODIUM, GASEOUS FLUORINE, STRONG OIDIZERS. Hazardous Decomposition or Byproducts: Hazardous Polymerization: May Occur: Will Not Occur: Conditions to Avoid: Section VI - Health Hazard Data Route(s) of Entry: Inhalation? YES Skin? YES Ingestion? YES Health Hazards (Acute and Chronic): NONE Carcinogenicity: NTP? NO IARC Monographs? NO OSHA Regulated? NO Signs and Symptoms of Exposure: INHALATION: POSSIBLE DIZZINESS IF USED IN CONFINED AREA. SKIN: MAY CAUSE MILD IRRITATION TO SENSITIVE SKIN. Medical Conditions Generally Aggravated by Exposure: NONE KNOWN. Emergency and First Aid Procedures: EYE CONTACT: FLUSH EYES WITH WATER. SKIN: WASH EPOSED AREA WITH SOAP AND WATER. WASH CLOTHING BEFORE REUSE. INHALATION: MOVE TO WELL VENTILATED AREA. INGESTION: CONSULT A PHYSICIAN. Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled: NORMAL GOOD HOUSEKEEPING PROCEDURES. Waste Disposal Method: DISPOSAL TO BE DONE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS. Precautions to Be Taken in Handling and Storing: STORE AWAY FROM HEAT OR OPEN FLAME. CLOSE CONTAINER AFTER USE. Other Precautions: WEAR PROTECTIVE GLOVES TO PREVENT POSSIBLE SKIN ABSORPTION AND DERMATITIS. KEEP OUT OF REACH OF CHILDREN. Section VIII - Control Measures Respiratory Protection (Specify Type): AVOID BREATHING OF FUMES. IF USED IN A CONFINED AREA, A RESPIRATOR MAY BE NECESSARY. Ventilation: Local Exhaust: NORMAL VENTILATION IS ADEQUATE. Mechanical (General): Special: Other: Protective Gloves: MAY BE NECESSARY FOR SENSITIVE SKIN. Eye Protection: KEEP OUT OF EYES. WEAR PROTECTIVE GOGGLES WHERE NECESSARY. Other Protective Clothing or Equipment: Work/Hygienic Practices: WASH UP WITH SOAP AND WATER AFTER USE. Page 2
MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 2 1 0 B May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY (AS USED ON LABEL AND LIST): W.O.G. plus U.S. Department of Labor Occupational Safety and Health Administrator (Non-Mandatory Form) Form Approved OMB No. 1218-0072 NOTE: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. Section I Manufacturer s Name: JOMAR GROUP Address (Number, Street, City, State, and ZIP Code): 7243 MILLER DRIVE Emergency Telephone Number: Telephone Number for Information: SUITE 100 Date Prepared: August 27, 2013 WARREN, MI 48092 Signature of Preparer (optional): Section II - Hazardous Ingredients/Identity Information HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL IDENTITY: COMMON NAME(S) OSHA PEL ACGIH TLV OTHER LIMITS Recommended % (optional) ISOPROPYL ALCOHOL [CAS#67-63-0] 500 ppm 5-10 Section III - Physical/Chemical Characteristics Boiling Point: 165 F Specific Gravity (H20 =1): 1.30 Vapor Pressure (mm Hg): 44 Melting Point: Vapor Density (AIR = 1): 1 Evaporation Rate (Butyl Acetate = 1): 1.9 Solubility in Water: 33% Appearance and Odor: VISCOUS BROWN LIQUID - SLIGHT ALCOHOL ODOR Section IV - Fire and Explosion Hazard Data Flash Point (Method Used): 58 F(TCC) Flammable Limits: LEL: 3.3% UEL: 1.9% Extinguishing Media: CARBON DIOIDE OR DRY CHEMICAL Special Fire Fighting Procedures: USE RESPIRATORY PROTECTION. Unusual Fire and Explosion Hazards: Page 1
Section V - Reactivity Data JOMAR W.O.G. plus Stability: Unstable: Stable: Conditions to Avoid: Incompatibility (Materials to Avoid): LIQUID OYGEN SYSTEMS. Hazardous Decomposition or Byproducts: Hazardous Polymerization: May Occur: Will Not Occur: Conditions to Avoid: Section VI - Health Hazard Data Route(s) of Entry: Inhalation? YES Skin? YES Ingestion? YES Health Hazards (Acute and Chronic): Carcinogenicity: NTP? NO IARC Monographs? NO OSHA Regulated? NO Signs and Symptoms of Exposure: INHALATION: POSSIBLE DIZZINESS IF USED IN CONFINED AREAS. SKIN: MAY CAUSE MILD IRRITATION TO SENSITIVE SKIN. INGESTION: WILL CAUSE NAUSEA AND DIZZINESS. Medical Conditions Generally Aggravated by Exposure: Emergency and First Aid Procedures: EYE CONTACT: FLUSH EYES WITH WATER AND CONTACT A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: MOVE TO FRESH AIR. INGESTION: DO NOT INDUCE VOMITING. CALL A PHYSICIAN. Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled: CONFINE SPILL AND USE NORMAL GOOD HOUSEKEEPING PROCEDURES. Waste Disposal Method: DISPOSAL TO BE DONE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. Precautions to Be Taken in Handling and Storing: STORE AWAY FROM HEAT OR OPEN FLAME. CLOSE CONTAINER AFTER EACH USE. Other Precautions: WEAR PROTECTIVE GLOVES TO PREVENT POSSIBLE SKIN ABSORPTION AND DERMATITIS. KEEP OUT OF REACH OF CHILDREN. Section VIII - Control Measures Respiratory Protection (Specify Type): AVOID BREATHING OF FUMES. IF USED IN A CONFINED AREA, A RESPIRATOR MAY BE NECESSARY. Ventilation: Local Exhaust: NORMAL VENTILATION IS ADEQUATE. Mechanical (General): Special: Other: Protective Gloves: GLOVES MAY BE NECESSARY FOR SENSITIVE SKIN. Eye Protection: KEEP OUT OF EYES. WEAR PROTECTIVE GOGGLES WHERE NECESSARY. Other Protective Clothing or Equipment: Work/Hygienic Practices: Page 2