SECTION 1: CHEMICAL PRODUCT & COMPANY INFORMATION APPLICABLE PART #: ATX-50-1P, ATX-100-1P, ATX-100-1G, IDENTITY: AlumTX 50nm, AlumTX 100nm, ATX-200-1G, ATX-300-1P, ATX-1000-1P AlumTX 200nm, AlumTX 300nm, AlumTX 1000nm SUPPLIER: Universal Photonics, Inc. FOR INFORMATION CALL 85 Jetson Ln CUSTOMER SERVICE (516) 935-4000 Central Islip, NY 11722 DATE PREPARED: August 21, 2014 TELEPHONE NUMBER: 1-866-519-4752 3E COMPANY ACCT#: 3665 SECTION 2: COMPOSITION INFORMATION COMPONENT CAS# WT % EINECS/ELINCS Aluminum Oxide 1344-28-1 20-30 215-691-6 Water 7732-18-4 70-80 231-791-2 SECTION 3: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: APPEARANCE: FLASH POINT: May create dusty conditions, which may aggravate existing dermatitis. White liquid with suspended particles. POTENTIAL HEALTH EFFECTS TARGET ORGANS: EYE: SKIN: INGESTION: INHALATION: CHRONIC: Lungs, Bones May cause minor irritation. May cause drying of the skin. Not expected to be an ingestion hazard. May be harmful if inhaled. May be irritating to mucous membranes and respiratory tract, causing cough and/or shortness of breath. SECTION 4: FIRST AID MEASURES EYES: SKIN: In case of eye contact flush eyes with copious amounts of water for 20 to 30 minutes while holding eyelids open. Seek medical attention. Wash with soap and copious amounts of water. 1
INHALATION: Wash out mouth with water providing person is conscious and alert. Seek medical attention. INGESTION: Remove to fresh air. If breathing becomes difficult, seek medical attention. SECTION 5: FIRE FIGHTING MEASURES GENERAL INFORMATION: EXTINGUISHING MEDIA: Wear self-contained breathing apparatus and protective clothing to prevent eye and skin contact. Emits toxic fumes under fire conditions. Water spray, carbon dioxide, dry chemical powder, or appropriate foam. SECTION 6: ACCIDENTAL RELEASE MEASURES GENERAL INFORMATION: SPILLS / LEAKS: Avoid generating dust. Avoid inhalation. Avoid skin and eye contact. Sweep or scoop up material and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete. SECTION 7: HANDLING & STORAGE HANDLING: STORAGE: Avoid inhalation. Wear suitable clothing to avoid eye or skin contact. Avoid prolonged or repeated exposure. Use adequate ventilation. Store in closed containers in cool, dry area. SECTION 8: PERSONAL PROTECTION AND EXPOSURE CONTROLS ENGINEERING CONTROLS: Safety shower and eye bath. Mechanical ventilation to meet exposure limits. CHEMICAL NAME ACGIH OSHA - FINAL PELS TOTAL RESPIRABLE TOTAL RESPIRABLE Aluminum oxide 10 mg/m3 5 mg/m3 10 mg/m3 5 mg/m3 Water Not Established Not Established Not Established Not Established PERSONAL PROTECTIVE EQUIPMENT EYES: SKIN: CLOTHING: Chemical splash goggles. Protective gloves. Suitable to avoid skin contact. 2
RESPIRATORS: Respiratory protection is not required. Where protection from nuisance levels of dust is desired, use NIOSH approved, type N95 (US) or Type P1(EN 143) respirators. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE: Liquid with suspended solids. APPEARANCE: White ODOR: Odorless PH: 4.0-7.0 VAPOR PRESSURE: Not known. VAPOR DENSITY: Not known. EVAPORATION RATE: Not known VISCOSITY: Not known BOILING POINT: 212 F FREEZING/MELTING POINT: 32 F AUTOIGNITION TEMPERATURE: Not available FLASH POINT: Not available DECOMPOSITION TEMPERATURE: Not available SOLUBILITY IN WATER: Insoluble SPECIFIC GRAVITY/DENSITY: 1.15-1.2, where water =1 MOLECULAR FORMULA: Not available EXPLOSION LIMITS: MOLECULAR WEIGHT: Not available LOWER: UPPER: Not available Not available SECTION 10: STABILITY & REACTIVITY CHEMICAL STABILITY: CONDITIONS TO AVOID: Stable Freezing temperature INCOMPATIBILITY WITH OTHER MATERIALS: Strong acids, Strong bases, Chlorine, Strong oxidizers HAZARDOUS DECOMPOSITION OF PRODUCTS: Aluminum oxide HAZARDOUS POLYMERIZATION: Will not occur. SECTION 11: TOXICOLOGICAL INFORMATION RTECS#: LD50/LC50 INFORMATION: Not known. CARCINOGENICITY: 3
NTP: OSHA: IARC: TERATOGENICITY: REPRODUCTIVE EFFECTS: NEUROTOXICITY: MUTAGENICITY: OTHER STUDIES: Not known. SECTION 12: ECOLOGICAL INFORMATION No information available. SECTION 13: DISPOSAL INFORMATION RCRA P-SERIES: RCRA U-SERIES: Ordinary solid waste methods recommended, if permitted, under federal, state and local regulations. SECTION 14: TRANSPORTATION INFORMATION US DOT HAZARD CLASS: Not Regulated. IATA (FOR INTERNATIONAL SHIPMENTS): Not Regulated. SECTION 15: REGULATORY INFORMATION UNITED STATES: TSCA: All ingredients of this product are on the TSCA Inventory. HEALTH & SAFETY REPORTING LIST: None of the ingredients of this product is on the Health & Safety Reporting List. CHEMICAL TEST RULES: None of the ingredients of this product is under a Chemical Test Rule. SECTION 12B: None of the ingredients of this product is listed under TSCA Section 12b. 4
TSCA SIGNIFICANT NEW USE RULE: None of the ingredients of this product has a TSCA SNUR. CERCLA SECTION 103: None of the ingredients of this product is listed under CERCLA Section 103. SARA: Section 302 (RQ): None of the ingredients of this product has an RQ. Section 302 (TPQ): None of the ingredients of this product has a TPQ. Section 313: CAS# 0344-28-1 is listed under SARA Section 313. CLEAN AIR ACT: Clean Water Act: None of the ingredients in this product is listed under the Clean Air Act. None of the ingredients of this product is listed under the Clean Water Act. STATE (INDIVIDUAL STATES IN THE USA): CAS# 1344-28-1 is listed on the Pennsylvania Right-to-Know list. CALIFORNIA NO SIGNIFICANT RISK LEVEL: CALIFORNIA PROP. 65: None of the ingredients in this product is listed under California Prop. 65. EUROPEAN/INTERNATIONAL REGULATIONS: EUROPEAN LABELING IN ACCORDANCE WITH EC DIRECTIVES : None of the ingredients of this product is listed. WGK (WATER DANGER/PROTECTION): None of the ingredients of this product is listed. CANADA THIS PRODUCT HAS A WHMIS CLASSIFICATION OF: DSL/NDSL: CAS# 1344-28-1 is listed on the DSL List. SECTION 16: OTHER INFORMATION HMIS Rating: Health 1, Flammability 0, Physical Hazard 0, Personal Protection B NFPA Rating (Estimated): Health 1, Flammability 0, Physical Hazard 0 If this product should be used in ways that are outside of the intended applications in surface finishing and/or polishing, and if it is going to be formulated into some other system, so that it becomes just another component of that other system, read the MSDS sheets for the other components before blending as the resulting mixture may have the hazards of all of its parts. 5
DISCLAIMER WHILE UNIVERSAL PHOTONICS, INC. BELIEVES THAT THE DATA AND INFORMATION CONTAINED HEREIN ARE FACTUAL AND THE OPINIONS ARE THOSE OF QUALIFIED EXPERTS, THEY ARE NOT TO BE TAKEN AS A WARRANTY OR REPRESENTATION FOR WHICH UNIVERSAL PHOTONICS, INC. ASSUMES ANY LEGAL RESPONSIBILITY. THEY ARE OFFERED SOLEY FOR THE CONSIDERATION, INVESTIGATION AND VERIFICATION BY THE USER. IT IS THE USER S RESPONSIBILITY TO DETERMINE THE SUITABILITY OF THIS PRODUCT, DATA AND INFORMATION WITH APPLICABLE LAWS AND REGULATIONS.alumtx.08.14.ms 6