Carbon fibre fine - standard real size 1:1 On request is possible produce carbon parts with another structure from our collection - mansory.com/carbon OVERVIEW 2016 last update 02 / 2016 The customization programme for Bentley Flying Spur
The Options for your Bentley Flying Spur V8 / W12 Front bumper I. with LED daylight ( chrome grills ) with front lip middle grill chrome compatbile for cars with or without ACC sensor air intake grills chrome - 2 parts set left/right with LED daytime running and fog lights BFS 102 022 Front bumper I. with LED daylight ( primed grills ) with front lip middle grill primed compatbile for cars with or without ACC sensor air intake grills primed - 2 parts set left/right with LED daytime running and fog lights BFS 102 023 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 1
The Options for your Bentley Flying Spur V8 / W12 Front bumper II. with grill mask - primed - front lip, air intake grills - grill mask not visible carbon fibre - LED daytime running lights compatbile for cars with or without ACC sensor BFS 102 042 Front bumper II. with grill mask II. for B-sculpture - primed - front lip, air intake grills - grill mask II not visible carbon fibre - LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately BFS 102 052 Front bumper II. with grill mask - front lip, air intake grills - grill mask - LED daytime running lights compatbile for cars with or without ACC sensor BFS 102 041 Front bumper II. with grill mask II. for B-sculpture - front lip, air intake grills - grill mask II - LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately BFS 102 051 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 2
The Options for your Bentley Flying Spur V8 / W12 Side skirts with lip BFS 595 002 Rear bumper with diffuser, air intakes, exhaust blinds BFS 802 031 Engine bonnet primed not visible carbon fibre BFS 210 002 Engine bonnet BFS 210 001 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 3
The Options for your Bentley Flying Spur V8 / W12 Front grill mask BFS 102 331 Front grill mask primed BFS 102 332 not visible carbon fibre compatible with OEM Front bumper model 2004-2015 and MANSORY Front bumper I. Front grill I. mask for B-sculpture BFS 102 341 Front grill I. mask primed for B-sculpture BFS 102 342 not visible carbon fibre Flying-B-sculpture BFS 00B OEM must be ordered separately compatible with OEM Front bumper model 2004-2015 and MANSORY Front bumper I. Front grill mask for B-sculpture (2016) BFS 112 341 Front grill mask primed for B-sculpture (2016) BFS 112 342 not visible carbon fibre Flying-B-sculpture BFS 00B OEM must be ordered separately compatible with OEM Front bumper from model 2016 Flying-B-sculpture BFS 00B OEM ( Original part - no discount ) compatible only with Front grill I / II mask for B-sculpture Mirror housing with feet LHD Mirror housing with feet RHD 4 parts set - left/right, visible carbon fibre glossy* BFS 522 751 BFS 522 761 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 4
The Options for your Bentley Flying Spur V8 / W12 Rear decklid spoiler - primed primed not visible carbon fibre BFS 830 842 Rear decklid spoiler - exposed BFS 830 841 V8 Engine carbon cover 5 Part set conversion kit BFS 000 99 X-pipe center pipe without CAT (catalyst) BFS 221 059 Mufflers 2 parts set - left & right, with throttle control BFS 221 009 W12 Engine carbon cover 3 Part set conversion kit BFS 000 09 only for W12 model till 2014 not compatible with model V8 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 5
The ADD ON PARTS for your Bentley Flying Spur V8 / W12 Front bumper lip, air intake grills not compatible with MANSORY Front bumper ( BFS 102 022 ) BFS 102 841 Rear diffuser not compatible with MANSORY Rear bumper ( BFS 802 031 ) BFS 802 891 Side skirts lip not compatible with MANSORY Side dkirts ( BFS 595 002 ) BFS 595 751 Add on chrome stripe - for front bumper 2 parts set - left & right BFS 112 851 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 6
The Options for your Bentley Flying Spur V8 / W12 MANSORY Lowering Suspension consisting of: - 2 level adjusting rods front axle - 2 level adjusting rods rear axle Lowering of approx 20-30 mm With the MANSORY Lowering Suspension you have the optimal symbiosis of excellent ride comfort during normal driving and agile direct response during fast cornering. The product described in the instructions has been developed, and manufactured under consideration of the necessary safety regulations, and is subject to quality checks. To guarantee flawless, safe function and to eliminate any risk to people or property, this product must be installed properly. Therefore installation should only be carried out by trained specialists, with the specific technical and specialist knowledge required for installation in a vehicle, and the necessary tools. For this, you must carefully read and understand the fitting instructions. MANSORY Lowering Suspension for Bentley Flying Spur 2 level adjusting rods front axle, 2 level adjusting rods rear axle Lowering of approx 20-30 mm BFS 900 101 Front axle Before starting work, check that all parts which should be included are present. Rear axle - Raise the vehicle on a suitable lifting mechanism at the position points specified by manufacturer, considering the relevant safety guidelines. - Take off the original connecting rods from the height sensors on the front and rear axles. - Put the connecting rod on the ball heads on the height level sensors and the holders. - Re-fit the wheels to the vehicle according to workshop instructions. - After installation of the connecting rod, no further adjustments should be made. All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 7
The INTERIOR Options for your Bentley Flying Spur V8 / W12 Sport steering wheel with MANSORY logo leather/carbon leather/wood leather/piano lacquer leather/leather BFS 351 441 BFS 351 445 BFS 351 446 BFS 351 444 modification only, OE-part required Airbag cover BFS 351 500 Shift paddles, BFS 350 011 available with leather, available with carbon alcantara, carbon, wood and wood modification only, OE-part required modification only, OE-part required MANSORY Individualized Interior Kit Complete refined interior, by exclusive leather sorts, combination on customers request. BFS 300 000 Entrance panels with blue illuminated MANSORY logo Entrance panels with white illuminated MANSORY logo BFS 395 351 BFS 395 355 4 parts set - front/rear, left/right, available with metal All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 8
The INTERIOR Options for your Bentley Flying Spur V8 / W12 Interior trims BFS 300 001 instrument panel, co-driver board, middle console front 2-parts, middle console rear 2-parts, ashtray, cover front and rear, jalousie front and behind, cover for light system front, 4-parts door panels available with carbon and wood modification only, OE-part required Sport pedals 3 parts set, acceleration, brake, foot rest BFS 367 127 Gearshift lever designed gearshift lever available with carbon and wood modification only, OE-part required BFS 363 011 Floor mats 4 parts, front/ rear, left/ right with MANSORY logo stitching BFS 367 758 Trunk mat with MANSORY logo stitch BFS 368 758 Trunk house decor Complete refined trunk compartment, by exclusive leather sorts, combination on customers request. BFS 368 500 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 9
The RIM for your Bentley Flying Spur V8 / W12 V6 wheel ( Silver diamond cut ) V6 wheel ( Anthracite diamond cut ) V6 wheel ( Black diamond cut ) RRB 010 227S RRB 010 227A RRB 010 227B M8 wheel 22 ( Silver diamond cut ) 1pc., 10 x 22, OS 30, with chrome/ silver wheel cap M8 112 22 30 13 spoke wheel, aluminium casted 22 inch polished 1pc., 10 x 22 OS 35 with chrome/ silver wheel cap M3 112 22 10 1pc., 10,5 x 22, OS 43, with chrome / silver wheel cap Tires recommended tyre site: 295/30/22 Continental SP5 Tires recommended tyre site: 295/30/22 Continental SP5 M8 wheel 21 ( Silver diamond cut ) 1pc., 10 x 21, OS 30, with chrome/ silver wheel cap M8 112 21 10 Tires recommended tyre site: 295/30/22 Continental SP5 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 10
The RIM for your Bentley Flying Spur V8 / W12 MULTISPOKE 21 inch wheel - Diamond silver - Diamond anthracite - Diamond black MULTISPOKE 22 inch wheel - Diamond silver - Diamond anthracite - Diamond black M11 21 30S M11 21 30A M11 21 30B M11 22 42S M11 22 42A M11 22 42B M10 rim 22 inch ( Silver diamond cut ) 1pc., 10 x 22 OS 30 with chrome/ silver wheel cap Tires recommended tyre site: 295/30/22 Continental SP5 M1 112 22 10 M10 rim 21 inch ( Silver diamond cut ) with black / silver wheel cap 1pc., 10.5 x 21 OS 30 Silver / fr. polished 1pc., 10.5 x 21 OS 30 Dark grey / fr. polished 880 821 0S30 880 821 0030 Spacer kit for M8, M10 spacers wheel 5 mm RA including screws, 2 parts set Spacer kit for V6 spacers wheel 10 mm FA and 15 mm RA including screws, 4 parts set Spacer kit for 13 spoke spacers wheel 10 mm RA including screws, 2 parts set BFS 611 D05 BFS 611 D15 BFS 611 D10 All prices calculated net, ex works excluding VAT, without painting and modification work. all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 06 / 2017 - page 11