WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL

Similar documents
60 Drum Style Spike Aerator

Heavy Duty Drag Harrow

HIGH WHEEL HOSE REEL CART OWNER S MANUAL

Heavy Duty Drag Harrow

TRI- B A L L H I TC H OWNER S MANUAL

INTENDED USE TECHNICAL SPECIFICATIONS

4-in-1 Professional Inflator Kit

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL

Angled Sign Light with Shade

Owner s. product. Failure injury

OWNER S MANUAL. Page: 1 of 8

4-BIKE HITCH RACK OWNER S MANUAL

HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL

G10K - 1/2" Heavy-Duty Air Impact Wrench

12 Inch Barn Light. Owner s Manual

WORK TABLE CART OWNER S MANUAL

1/4 SHEET PALM SANDER

1000-Lb. Rapid Lift Hydraulic Table

8-GAL PNEUMATIC OIL DISPENSER

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

ORBITAL AIR SANDER. Owner s Manual

COMPACT METAL bender 99826

G R AV I T Y B I K E S TA N D OWNER S MANUAL

8-GALLON AIR-OPERATED OIL CHANGER

3/8" Air Impact Wrench

foldable/adjustable sawhorse

Belt Sander. Owner s Manual

AIR HYDRAULIC RIVETER

Steel Spring Driven Reel Instruction Manual

AIR INLINE METAL SHEAR

3:1 High Ratio Oil Pump W. Extn. Kit

1/2 in. Air Impact Wrench

Owner s Manual & Safety Instructions

30 magnetic sweeper with wheels

2000 lb manual winch

3/8" Dr. Air Butterfly Impact Wrench

TEM# Air Hammer Combo USER'S MANUAL

AIR/OVER HYDRAULIC JACK 20 TON

1 DRIVE INDUSTRIAL IMPACT WRENCH

Owner s Manual & Safety Instructions

Model Visit our website at:

Retractable Hose Reel with 3/8" x 50' PVC Hose

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

Heavy-Duty Hot Knife

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS

NOTE: Parts are no longer available for this tool. The manual will continue on the next page.

Operating Instructions and Parts Manual 24529

6 DUAL ACTION AIR SANDER

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS

ATD Gallon Pressurized Oil Drain Owner s Manual

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

Tube-Line Accelerator Spinner Kit

1/4 Air Ratchet Wrench

3 AIR HIGH SPEED CUTTER

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.

Heavy duty English wheel

PUN M Manual Finger Punch Safety and Operation Manual

Model ASSEMBLY and OPERATING INSTRUCTIONS

HYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL

Instruction Manual. PE Pipe Squeeze-off Tool Model TR650

airplaine kite Model assembly & Operating Instructions Important: If damage is caused due to a crash; your warranty is void.

PORTABLE 5 GALLON AIR TANK ASSEMBLY & OPERATING INSTRUCTIONS

Soot Buster. Operating and Maintenance Instructions. M

300 Lbs. Motorcycle Scissor Lift

AIR HAMMERS MODEL NO: CAT138/CAT139 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: / GC064

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written

Safety and operating instructions

8 TON AIR/MANUAL FLAT BOTTOM JACK

1/4 COMPOSITE AIR DIE GRINDER

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL

Hole cutter. Model 97194

SIGNATURE DEF REELS Models: Bare Reel Reel Reel Reel

deluxe toilet safety support

Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written

FLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS

CUT OFF TOOL MODEL: CAT113

OPERATOR S MANUAL AND PARTS LISTING FOR THE. STM Mounted Harrow

Reciprocating saw attachment

DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE

DRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.

Portable Compressed CO 2 Regulator

MODEL H RPM

PDY TON HYDRAULIC CRIMPING TOOL WARNING

20 Ton SD Shop Press Operating Instructions

1/4 AIR RIVETER INSTRUCTION MANUAL

4 ANGLE GRINDER MODEL NO: CAT 52 PART

SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.

Offset head dual chuck

INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY

Instruction Manual. Model TC1-S TopSide Clamp. top side clamp. For your personal safety READ and UNDERSTAND instructions before using tools.

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

75 Ton SD Shop Press Operating Instructions

Universal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.

OPERATORS MANUAL MODEL 365 BACK LAPPING MACHINE WARNING

20 Gallon Portable Oil Lift Drain

3 COMPOSITE AIR CUT-OFF TOOL

Transcription:

WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic precautions may result in serious injury. ITEM #163150

Thank you very much for choosing a Roughneck product. For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This item is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this item not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use this product until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call 1-800-222-5381. GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this hose reel until they have read this manual and have developed a thorough understanding of how it works. WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. WARRANTY SAVE THESE INSTRUCTIONS 7-Year Limited Warranty Northern Tool + Equipment warrants this hose reel, components and parts, unless otherwise specified, under normal use and service for a period of 7 years. Northern Tool + Equipment reserves the right to substitute for equivalent model hose reel (or parts) in the event this specific model (or part) is no longer available. This warranty does not cover damage caused by products not supplied by warrantor, leaking caused by use of acid, harsh chemicals or mineral deposits, or failures which results from accidents, mishandling, faulty installation, freezing, misuse or misapplication, abuse or neglect. Page 2 of 6

WORK AREA Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. Keep children and bystanders away while operating this hose reel. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work area, particularly those hazards below the work surface hidden from the operator s view that may be unintentionally contacted and may cause personal harm or property damage. Be alert of your surroundings. Using this hose reel in confined work areas may put you dangerously close to cutting tools and rotating parts. PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when using this product. Do not use while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating a hose reel may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Use safety apparel and equipment. Use safety goggles or safety glasses with side shields which comply with current national standards, or when needed, a face shield. Use as dust mask in dusty work conditions. This applies to all persons in the work area. Also use non-skid safety shoes, hard hat, gloves, dust collection systems, and hearing protection when appropriate. PRODUCT USE AND CARE Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which this product was designed. Always check for damaged or worn out parts before using this hose reel. Broken parts will affect the operation. Replace or repair damaged or worn parts immediately. Do not exceed the hose reel capacity. Mount the hose reel on a surface capable of supporting the hose reel and its maximum load. Store idle hose reel. When hose reel is not in use, store it in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use. Page 3 of 6

ASSEMBLY INSTRUCTIONS Perpendicular Mount (as shown on right) 1. Attach stand (Item 7) to base (Item 1) with M8 SHCS (Item 11) and washers (Item 12). 2. Slide bushing (Item 20) on to preassembled mounting tube with wheel, insert into stand and tighten bolts. 3. Attach hose (Item 17) to swivel (Item 4) and thread swivel into mounting tube. A little light oil or grease helps with threading. 4. Attach your garden hose to the swivel and you are ready to use your Roughneck garden hose reel. Page 4 of 6

ASSEMBLY INSTRUCTIONS Changing from Perpendicular Mount to Parallel Mount (as shown on right) 1. Remove the mounting tube and hose reel assembly by removing the cap fastened by (2) M8 x 25 hex head bolts. This makes the switch easier. 2. Remove the (2) M10 SHCS holding the stand to the base. 3. Rotate the stand 180 0 and reattach to base. 4. Reassemble the hose reel assembly and mounting tube. Page 5 of 6

EXPLODED VIEW AND PARTS LIST 25 8 17 6 5 3 2 11 7 13 12 19 1 4 10 23 9 24 21 21 22 18 20 16 15 ITEM PART # DESCRIPTION QTY 1 2540004 Base 1 2 2103080 Assy., Flange 1 3 2530080 Tube, Mounting 1 4 2103081 Swivel 1 5 2530025 Bushing 2 6 2203403 Washer 2 7 2450005 Stand 1 8 2450006 Cap 1 9 2200077 SHCS, M8 x 30 2 10 2200042 Washer, M10, Flat, SST 2 11 100056 Handle, Assy. 1 12 2530078 Pin, Lock 1 13 2720004 Spring 1 14 2103082 Hose, Assy. 1 15 2200078 Bolt, Lag 4 16 2200008 Washer. Flat. M10 4 ITEM PART # DESCRIPTION QTY 17 2660199 Spacer 1 18 2400002 Decal 1 19 2200032 Ring 1 20 2103096 Assy., Hose 1 21 2200018 Washer, M6 2 22 2200026 Nut Nylok, M6 1 23 2202025 Clamp, Hose 1 24 2200083 Bolt, M6 1 25 2200054 SHCS 2 Distributed By Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306-6396 Made in China