Conforms to Regulation No. 1907/2006 (REACH), RoHS Directive 2011/65/EU Annex II and California Proposition 65 SAFETY DATA SHEET Lenspen LP-1 / NLP-1, DigiKlear DK-1 / NDK-1, FilterKlear LFK-1 / NLFK-1, minipro NMP-1, Mini- Pro-II MP-II-1, micropro MCP-1 / NMCP-1, SensorKlear SK-1 / SK-1A, Lap-Top-PRO LTP-1, ScreenKlean SDK-1 / SDK-1-RUS / SDK-1-C / SDK-CP / SDK-P-C / SDK-2 / SDK-2-RUS, SDK-2-C, SmartKlear SMK-1 / SMK-1-RUS, SMK-1-C / SMK-CP / SMK-P-C, SMK-2, SMK-2-RUS / SMK-2-C, SmartKlearPRO SMKPRO-1 / SMKPRO-1-RUS, SMKPRO-1-C / SMKPRO-CP / SMKPRO-2, SMKPRO-2-RUS / SMKPRO-2-C, Peeps-1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance or preparation Product Name: Lenspen LP-1 / NLP-1, DigiKlear DK-1 / NDK-1, FilterKlear LFK-1 / NLFK-1, minipro NMP-1, Mini-Pro-II MP-II-1, micropro MCP-1 / NMCP-1, SensorKlear SK-1 / SK-1A, Lap-Top-PRO LTP-1, ScreenKlean SDK-1 / SDK-1-RUS / SDK-1-C / SDK-CP / SDK-P-C / SDK-2 / SDK-2-RUS, SDK-2-C, SmartKlear SMK-1 / SMK-1-RUS, SMK-1-C / SMK-CP / SMK-P-C, SMK-2, SMK-2-RUS / SMK-2-C, SmartKlearPRO SMKPRO-1 / SMKPRO-1-RUS, SMKPRO-1-C / SMKPRO-CP / SMKPRO-2, SMKPRO-2-RUS / SMKPRO-2-C, Peeps-1 REACH Product Name: Product type: Carbon Black Solid Company/undertaking identification Fabricator: e-mail address of person responsible for this SDS: Emergency telephone number: (with hours of operation) Parkside Optical Inc. 650-375 Water Street, Vancouver, BC Canada V6B 5C6 lenspens@gmail.com 01-778-319-6333 (09.00-18.00 hrs., Monday to Friday) 2. HAZARDS IDENTIFICATION The product is not classified as dangerous according to Directive 1999/45/EC and its amendments. Classification according to Regulation (EC) 1907/2006 (REACH) Classification: Not classified.. See section 11 for more detailed information on health effects and symptoms.
3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture: Mono-constituent substance Ingredient name CAS Number % Number Classification (according to REACH) Carbon black 1333-86-4 75-100 215-609-9 Not classified. [2] There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section Occupational exposure limits, if available, are listed in section 8. 4. FIRST AID MEASURES First-aid measures Inhalation: Ingestion: Skin contact: Eye contact: Protection of first-aiders: Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention if symptoms occur. Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. Flush contaminated skin with plenty of water. Remove contaminated and shoes. Get medical attention if symptoms occur. Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs. No action shall be taken involving any personal risk or without suitable training. Notes to physician: No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. See section 11 for more detailed information on health effects and symptoms. 5. FIRE-FIGHTING MEASURES Extinguishing media Suitable: Not suitable: Special exposure hazards: Use an extinguishing agent suitable for the surrounding fire. None known. No specific fire or explosion hazard.
Hazardous thermal decomposition products: Decomposition products may include the following materials: carbon dioxide carbon monoxide Specialprotective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self- Contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. 6. HANDLING AND STORAGE Handling: Put on appropriate personal protective equipment (see section 7). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking Storage: Packaging materials Recommended: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination. Use original container. 7. EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure limit values Ingredient name Occupational exposure limits Carbon black EH40/2005 WELs (United Kingdom (UK), 8/2007). STEL: 7 mg/m3, 0 times per shift, 15 minute(s). TWA: 3.5 mg/m3, 0 times per shift, 8 hour(s). Recommended monitoring procedures: Exposure controls Occupational exposure Controls: If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances. No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.
Hygiene measures: Respiratory protection: Hand protection: Eye protection: Skin protection: Environmental exposure controls: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.. Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts. Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.. 8. PHYSICAL AND CHEMICAL PROPERTIES General Information Appearance Physical state: Solid 9. STABILITY AND REACTIVITY Chemical stability: Possibility of hazardous reactions: Conditions to avoid: Materials to avoid: The product is stable. Under normal conditions of storage and use, hazardous reactions will not occur.. Hazardous decomposition: Under normal conditions of storage and use, hazardous decomposition products should not be produced. 10. TOXICOLOGICAL INFORMATION Toxicokinetics Absorption : Metabolism : Elimination :
Potential acute health effects Inhalation : Ingestion : Skin contact: Eye contact: Acute toxicity Product/ingredient name Result Species Dose Exposure carbon black LD50 Dermal LD50 Oral Rabbit Rat >3 g/kg >15400 mg/kg - - : Potential chronic health effects Chronic toxicity Irritation/Corrosion Sensitiser Carcinogenicity Mutagenicity Teratogenicity Reproductive toxicity Chronic effects : Carcinogenicity : Mutagenicity : Teratogenicity : Developmental effects: Fertility effects: Carbon black, in its unbound form, is listed as a Class 2B (Possible human carcinogen) by IARC. Carbon black in this product, due to its bound form, does not present a cacinogenic risk. None of the other ingredients in this product are listed by IARC, NTP, EU, MAK, OSHA or ACGIH as a carcinogen. None of the other ingredents have been classified as carcinogens according to EU, IARC, MAK, NTP or OSHA. Meets the standards of California Propositon 65. No known significant effects or critical hazards Over-exposure signs/symptoms Inhalation : Ingestion : Skin : Eyes :
11. ECOLOGICAL INFORMATION Ecotoxicity : Aquatic ecotoxicity : Other ecological information Persistence/degradability : Other adverse effects : PBT : vpvb : 12. DISPOSAL CONSIDERATIONS Methods of disposal : Hazardous waste : The generation of waste should be avoided or minimised wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Within the present knowledge of the supplier, this product is not regarded as hazardous waste, as defined by EU Directive 91/689/EEC. 13. TRANSPORT INFORMATION Regulatory information UN number Proper Shipping name Classes PG* Label Additional information ADR/RID Class Not available Not available Not available - - ADN/ADNR Class Not available Not available Not available - - IMDG Class Not available Not available Not available - - IATA Class Not available Not available Not available - - PG* : Packing group
14. REGULATORY INFORMATION Chemical Safety : EU regulations This product contains substances for which Chemical Safety Assessments are still required. Classification and labeling according to Regulation (EC) 1907/2006 (REACH) Classification and labeling have been determined according to EU Directives 67/548/EEC and 1999/45/EC (including amendments) and take into account the intended product use. Risk phrases : Product use : Europe inventory : Black List Chemicals : Priority List Chemicals : Integrated pollution prevention and control list (IPPC) Air : Integrated pollution prevention and control list (IPPC) Water : Other EU regulations Additional warning phrases : International regulations Chemical Weapons Convention List Schedule I Chemicals : Chemical Weapons Convention List Schedule II Chemicals : Chemical Weapons Convention List Schedule III Chemicals : This product is not classified according to EU legislation. Consumer applications. All components are listed or exempted. Safety data sheet available for professional user on request. 15. OTHER INFORMATION Restrictions on use None identified History Date of printing: 06/30/2014. Date of issue/ Date of revision: 12/03/2012. Indicates information that has changed from previously issued version.
Notice to reader To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Annex Date of issue/date of revision: 06/30/2014