SIGMACAP ZINC SILICATE PIGMENT Version 1 Print Date Dec 2002

Similar documents
SIGMA THINNER Version 1 Print Date Dec 2002

SIGMA THINNER Version 1 Print Date Dec 2002

SIGMA SILOXAN TOPCOAT Version 3 Print Date 4/12/2005

SIGMA ZINC CHROMATE PRIMER Version 1 Print Date Dec 2002

SIGMA RENOVA ISOTOP MATT Version 4.2 Print Date 4/12/2005

Version 1 Print Date Dec IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

SIGMA C200a COAL TAR EPOXY HARDENER Version 1 Print Date Dec 2002

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

SIGMACAP PRIMER EP HARDENER Version 1 Print Date Dec 2002

SIGMA NOVAGUARD HARDENER Version 1 Print Date Dec 2002

SIGMACAP PU FINISH HARDENER Version 1 Print Date Dec 2002

SAFETY DATA SHEET according to EC directive 2001/58/EC ENERGY LINE PLASTIC PRIMER

SAFETY DATA SHEET according to EC directive 2001/58/EC MACROFAN HS FAST BINDER Version 2 Print Date 01/02/2006

SAFETY DATA SHEET according to EC directive 2001/58/EC DILUENTE ANTISILICONE SPEEDY

PRODUCT HEALTH AND SAFETY DATA

SIGMA S2U GLOSS (AROMATIC FREE) Version 7.2 Print Date 4/12/2005

SIGMACAP PRIMER EP BASE Version 1 Print Date Dec 2002

SIGMA C200a COAL TAR EPOXY BASE Version 1 Print Date Dec 2002

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II and Regulation (EC) No. 1272/2008 (CLP) - Europe. Bona Wood Floor Refresher

MATERIAL SAFETY DATA SHEET

Sanding Sealer Revision Date: 23/05/2002

Health and Safety Data Sheet

SAFETY DATA SHEET (91/155/EC) IDENTIFICATION OF THE SUBSTANCE /

SAFETY DATA SHEET according to EC directive 2001/58/EC DILUENTE AUTOREFINISH.SPEEDY

Products with label reference : N

SIGMACAP COATING EP BASE Version 1 Print Date Dec 2002

SAFETY DATA SHEET NOVAVIT EASY MIX BIO; ORANGE 1KG

Material Safety Data Sheet Poren Render

Intended Use : Colourant for natural latex products Colourant for water based emulsion coating.

Bona Naturale Base. Identification of the preparation and of the company

Enewall Acrylic Render

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

Trade name: Giessharz-Polyol LG Status: ) Identification of the substance/mixture and of the company/undertaking

Version 1. Trade name : ALEXIT-BladeRep Putty achatgrau. : Industrial serial painting

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/ UNDERTAKING

Revision date : Version (Revision) : (2.0.2) Date of print :

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product information

SAFETY DATA SHEET RONSEAL SPRAYABLE ONE COAT FENCELIFE

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

SAFETY DATA SHEET RONSEAL GARDEN FURNITURE STAIN

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

SAFETY DATA SHEET COLRON REFINED BEESWAX

Material Safety Data Sheet according 91/155/EEC Product Name : BOAT THINNER Date: Revision date: page: 1 of 5

Status: Date of printing: 27/05/03 Page: Seite: 1/6

AMERCOAT 71 CURE MSDS EU 01 / EN Version 1 Print Date 6/2/2010 Revision date

SAFETY DATA SHEET RONSEAL DIAMOND HARD CLEAR FLOOR VARNISH

Denbigh Road Bletchley Milton Keynes MK1 1PB. R41 Risk of serious damage to eyes.

Safety Data Sheet. 1. Identification of the preparation and company

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

THINNER MSDS EU 01 / EN Version 3 Print Date 6/1/2010 Revision date

Material Safety Data Sheet according 91/155/EEC Product Name : AQUA Covering Lacquer Kö A372 Date: Revision date:

SAFETY DATA SHEET PSX 700 RESIN. Identification of the substance/preparation and of the company/undertaking

Product Code: M-68 Page 1 of 8 Date of Issue: 29/11/2012 Version no.1

SAFETY DATA SHEET RONSEAL DECKING STAIN

SAFETY DATA SHEET. IKOpro Black Bitumen Paint. Version:1 First edition date:12/10/10 R:1907/2006/EC - ISO

Material Safety Data Sheet according 91/155/EEC Product Name : Holzseife Date: Revision date: page: 1/5

Resysta Floor Sealer RFS Component B (HAERTER ) MSDS EU 01 / EN Version 1 Print Date Revision date

EC SAFETY DATA SHEET Trade Name : BOMBAY AL Status : 05/01/2011 Product Code : BW5020 Page : 1

SAFETY DATA SHEET COLRON REFINED FINISHING WAX

S72 Penetrant Remover Aerosol

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/ UNDERTAKING

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

: INSTRUMENTAL POLYMER TECHNOLOGIES, INC.

SAFETY DATA SHEET Sandtex Trade Fungicidal Solution

BEGER B-2000 WOOD SEALER

NUKLAD 114 A RESIN MSDS EU 01 / EN Version 1 Print Date 6/2/2010 Revision date

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Resiblock Indian Sandstone Sealer Invisible

Firebreak Flexi-Seal Coating Material Safety Data Sheet

Material Safety Data Sheet. 1. Product and company identification

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Product Name and Code : Retarder VZ 2

SIGMA AQUACOVER 200 BASE MSDS UK 01 / EN Version 5 Print Date 9/19/2009 Revision date

Material Safety Data Sheet StoPlex W

* General advice: In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.

AMERCOAT 178 WASHPRIMER RESIN MSDS EU 01 / EN Version 1 Print Date 5/29/2010 Revision date

Safety Data Sheet. according to Regulation (EC) No 1907/2006. Alpine Hydrauliköl HLP 32

SAFETY DATA SHEET ULTIMEG 2000/380 HF

1.4. Emergency telephone number : US Emergency Telephone No (STERIS); (CHEMTREC)

MATERIAL SAFETY DATA SHEET F408 LINK-LUBE CHAIN SPRAY NSF

TIDEGUARD 171 A CURE MSDS EU 01 / EN Version 1 Print Date 6/16/2010 Revision date

Safety Data Sheet Copper Compound

Material Safety Data Sheet according 91/155/EEC Product Name : Felt-Touch-Up Dye Pen Kö A210 Date: Revision date:

Material Safety Data Sheet

Safety Data Sheet. 1. Product and company identification

SAFETY DATA SHEET. Perma-White Satin Bathroom Paint.

WINDMILL GLEAM PLUS WINDOW CLNR

Cas-No. Names Conc. Symb. R phrases n.a.

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

SAFETY DATA SHEET CARLUBE 10W30 SUTO TRACTOR

SAFETY DATA SHEET INSULCAST RTVS 27 LV GRAY PT A

1. Product and company identification

SAFETY DATA SHEET This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive 2001/58/EC.

SAFETY DATA SHEET according to 1907/2006/EC, Article 31

Ardrox 8903W Aerosol. SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006. Version:

Material Safety Data Sheet. 1. Product and company identification

MC-780 C-12 Kit. SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006. Version: Print Date

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. Denbigh Road Bletchley Milton Keynes MK1 1PB

PFC COROFIL INTUMESCENT SILICONE PUTTY

Transcription:

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product information Trade name : 7658 Company : Sigma Paints Saudi Arabia Ltd PO Box 7509 Dammam 31472 Telephone : 96638473100 Telefax : 96638471734 Emergency telephone number : 96638572394 2. COMPOSITION/INFORMATION ON INGREDIENTS Components CAS-No. Symbol(s): R-phrase(s) Concentration zinc powder - zinc dust 7440-66-6 F R10, R15 50.00-100.00% 3. HAZARDS IDENTIFICATION R-phrase(s) : FLAMMABLE. CONTACT WITH WATER LIBERATES EXTREMELY FLAMMABLE GASES. S-phrase(s) : Keep container tightly closed and dry. Do not breathe dust. In case of insufficient ventilation, wear suitable respiratory equipment. In case of fire, use.? Never use water. 4. FIRST AID MEASURES General advice : When symptoms persist or in all cases of doubt seek medical advice. Never give anything by mouth to an unconscious person. Eye contact : Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses. Seek medical advice. Skin contact : Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners. Inhalation : Remove to fresh air. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice. Ingestion : If accidently swallowed obtain immediate medical attention. Keep at rest. Do not induce vomiting. 1/5

5. FIRE-FIGHTING MEASURES Specific hazards during fire fighting : As the product contains cumbustible organic components, fire will produce dense black smoke containing hazardous products of combustion (see section 10). Exposure to decomposition products may be a hazard to health. Cool closed containers exposed to fire with water spray. Do not allow run-off from fire fighting to enter drains or water courses. : In the event of fire, wear self-contained breathing apparatus. Special protective equipment for fire-fighters Suitable extinguishing media : dry powder dry sand carbon dioxide (CO2) Extinguishing media which : Do NOT use water jet. must not be used for safety reasons 6. ACCIDENTAL RELEASE MEASURES Personal precautions : Use personal protective equipment. Ventilate the area. Refer to protective measures listed in sections 7 and 8. Wear respiratory protection. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Remove all sources of ignition. Environmental precautions : Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities. Methods for cleaning up : Clean with detergents. Avoid solvents. Contain and collect spillage with noncombustible absorbent material, (e.g. sand, earth, diatomaceus earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Additional advice : Refer to section 15 for specific national regulation. 7. HANDLING AND STORAGE Handling Safe handling advice : Avoid exceeding of the given occupational exposure limits (see section 8). Use only in area provided with appropriate exhaust ventilation. Avoid contact with skin, eyes and clothing. Smoking, eating and drinking should be prohibited in the application area. Avoid inhalation of vapour or mist. For personal protection see section 8. Advice on protection against fire and explosion Storage : Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour concentration higher than the occupational exposure limits. When transferring from one container to another apply earthing measures and use conductive hose material. No sparking tools should be used. The product should only be used in areas from which all naked lights and other sources of ignition have been excluded. No smoking. The accumulation of contaminated rags and dry overspray, particularly in spray booth filters, may result in spontaneous combustion. Good housekeeping standards, regular safe removal of waste materials and regular maintenance of spray booth filters will minimise the risks of spontaneous combustion and other fire hazards. Requirements for storage areas and containers : Observe label precautions. Prevent unauthorized access. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store between 5 and 25 C in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Solvent vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Electrical installations / working materials must comply with the technocological safety standards. Keep away from sources of ignition - No smoking. Store in accordance with the particular national regulations (see section 15). Advice on common storage : Keep away from oxidising agents and strongly acid or alkaline materials. 2/5

8. EXPOSURE CONTROLS / PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value [mg/m 3 ] Value [ppm] Basis ZINC(II)OXIDE 1314-13-2 5.00 MAC (NL) TWA Personal protective equipment Personal protection advice : Use personal protective equipment. Ventilate the area. Refer to protective measures listed in sections 7 and 8. Wear respiratory protection. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Remove all sources of ignition. Respiratory protection : Provide adequate ventilation. Hand protection : For prolonged or repeated contact use protective gloves. Barrier creams may help to protect the exposed areas of skin, they should however not be applied once exposure has occurred. Skin should be washed after contact. Eye protection : Chemical resistant goggles must be worn. Skin and body protection : Personnel should wear protective clothing. Skin should be washed after contact. 9. PHYSICAL AND CHEMICAL PROPERTIES Form : powder Colour : grey Odour : none Flash point : Note: not applicable Density : 5.6 g/cm3 Water solubility : Decomposes in contact with water. 10. STABILITY AND REACTIVITY Conditions to avoid : Avoid temperatures above 60 C, direct sunlight and contact with sources of heat. Exposure to water vapour. Exposure to moisture Hazardous reactions : Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions. Hazardous decomposition products : In case of fire hazardous decomposition products may be produced such as: Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke. Zinc oxide fumes. 11. TOXICOLOGICAL INFORMATION Acute oral toxicity : May cause nausea, abdominal spasms and irritation of the mucous membranes. 3/5

Acute inhalation toxicity : Inhalation of airborne particles may cause irritation of the respiratory tract. Skin irritation : Powder can cause localised skin irritation in folds of the skin or under tight clothing. Eye contact : The liquid splashed in the eyes may cause irritation and reversible damage. Further information : There is no data available for this product. 12. ECOLOGICAL INFORMATION Further information : There is no data available for this product. 13. DISPOSAL CONSIDERATIONS Product : The product should not be allowed to enter drains, water courses or the soil. Disposal together with normal waste is not allowed. Special disposal required according to local regulations. 14. TRANSPORT INFORMATION ADR : Not classified as dangerous in the meaning of transport regulations. IMDG : Not classified as dangerous in the meaning of transport regulations. IATA_C : Not classified as dangerous in the meaning of transport regulations. 15. REGULATORY INFORMATION Remarks : A hard copy of the label is placed in section 3 R-phrase(s) : R10 Flammable. R15 Contact with water liberates extremely flammable gases. S-phrase(s) : S 7/8 Keep container tightly closed and dry. S22 Do not breathe dust. S38 In case of insufficient ventilation, wear suitable respiratory equipment. S43 In case of fire, use.? S43-water Never use water. VOC : 0 g/l National legislation Vlarem : Vlarem 4 NER Classification : NER Class O.1: 0.0 %(m) NER Class O.2: 0.0 %(m) NER Class O.3: 0.0 %(m) 4/5

16. OTHER INFORMATION Explanation of R-phrases mentioned in section 2 zinc powder - zinc dust R10 Flammable. R15 Contact with water liberates extremely flammable gases. Changes since the last version will be highlighted in the margin. This version replaces all previous versions. The information contained in this safety data sheet is based on the present state of knowledge and current national legislation at the date of issue. The company reserves the right to modify data without notice. Any change in data will normally be followed by issue of a new safety data sheet. The user should check the date of issue and if more than 12 months have elapsed, then the data should only be used after checking with our nearest sales office to establish that they are still valid.. As the specific conditions of use of the product are outside the suppliers control, the user is responsible for ensuring that the requirements of relevant legislation are complied with. None of the information contained in this safety data sheet can be constructed as a guarantee with regard to the properties of the product described. No liability can be accepted on the basis of this safety data sheet. After all component(s) stated on the relevant Technical Data Sheet have been mixed the safety precautions mentioned on each of the component(s) safety data sheets and labels should be used in assessing the safety precautions of the mixed product. For further information see technical data sheet number: 7658 5/5