Low Pressure 2-Way Ball Valve Low Pressure 3-Way Ball Valve Mini Ball Valve 4 2 3 VLVES SECTO EX Locking and Twin Handles 1
1 2 3 4 6 7 89 VLVES 2-WY VLVES LPBV-2W 2-WY FULL BORE LOW PRESSURE BLL VLVE G PPROVE Sand blasted nickel plated brass body Positive stop positions for handle Steel handle with yellow PVC coating and G pproval - lockable handle available (page ) Chrome plated ball internally with full flow design ustralian Gas ssociation (G) approved ball valve Cap sealed with high quality industrial adhesive Full port to 337 for maximum flow Handle stops on body to avoid stresses at the stem Handle clearly shows ball position 2999, SO 228 BSPP female x female threads ual sealing system allows valve to be operated in either direction making installation easier ickel plated and hot forged / sand blasted brass body Brass according to E 1216 and E 12164 (formerly 17660 and U 70-6) specifications Pure PTFE self-lubricating seats Geomet carbon steel handle with thick PVC dip coating Blowout-proof nickel plated brass stem FPM O-rings at the stem for maximum safety Silicone-free lubricant on all seals bar (Kg/cm²) up to 2 non-shock cold working pressure Warning: freezing of the fluid in the installation may severely damage the valve Temp. Range - C to +170 C with standard seals (Refer pressure-temp graph) For use with dangerous fluids temperature rating is C to +60 C and pressure rating is bar Common Uses: Water, oil, gas Pressure - Temperature Graph Pressure rop Graph 00 900 800 700 600 00 0 P (bar) 1/4-3/8-1/2 0 0 1¼ - 1½ - 2 3/4-1 p (mbar) 0 90 80 70 60 0 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 0-0 0 10 170 T ( C) Kv (m³/h) H2O 0 60 70 80 90 0 0 0 0 00 L G CH dn H ash ominal Bore W.P. * imensions (mm) (inch) bar L G H CH LPBV-2W-006 4 1/4 8 12 4 22.2 82 38 LPBV-2W-0 6 3/8 12 4 22. 82 38 LPBV-2W-013 8 1/2 1 1. 9 29. 0 43 2 LPBV-2W-0 12 3/4 17 64 32 1 0 31 LPBV-2W-02 16 1 2 21 81. 1 4 LPBV-2W-032 1¼ 32 23 93 46. 18 73 49 LPBV-2W-038 24 1½ 38 23 2 1 18 79 4 LPBV-2W-01 32 2 0 26. 121 60. 18 86 68. * Working Pressure only bar for dangerous fluids 2
LPBV-3W 3-WY FULL BORE LOW PRESSURE BLL VLVE L-PORT Sand blasted nickel plated brass body Positive stop positions for handle luminium red handle - lockable handle available (page ) Chrome plated ball internally with full flow design Full port to 337 for maximum flow Handle stops on body to avoid stresses at the stem Handle clearly shows ball position SO 228 BSPP female x female threads Four seats design limits mixing of the various fluids in the system o metal-to-metal moving parts ickel plated and hot forged / sand blasted brass body and caps Copper alloy brass according to E 1216 and E 12164 specifications Chrome plated brass ball for longer life Pure PTFE self-lubricating seats U 888 cycle and torque tests performed Two BR O-rings at the stem for maximum safety Silicone-free lubricant on all seals See Table for non-shock cold working pressure Extra port for lowest pressure drop Warning: freezing of the fluid in the installation may severely damage the valve Temp. Range - C to +1 C with standard seals (refer Pressure-Temp graph) ot to be used with dangerous gases in sizes larger than 2mm ot to be used with non-dangerous gases in sizes larger than mm. Common Uses: Water, oil, gas 3-way L port B VLVES 3-WY VLVES Pressure -Temperature Graph Pressure rop Graph 1/4"-3/8"-1/2" bar 4 3 P 1 kv=1, (1/4") kv=2, (3/8") kv=3, (1/2") kv=7 (3/4") kv=12 (1") kv=19, (1,1/4") kv=37 (1,1/2") kv=2 (2") 3/4"-1" P 0.8 1.1/4" 2 P 0.6 1.1/2" 1 P 0.4 2" P 0.2 0 0 - - C 60 80 0 1 1 10 0.1 0.2 0.4 0.6 0.8 2 4 6 8 60 80 G L CH dn H ash ominal Bore W.P. * imensions (mm) (inch) LPBV-3W-006-L 04 1/4 8 bar L G H CH 19 77 7 12 6 22 LPBV-3W-0-L 06 3/8 19 77 7 12 6 22 LPBV-3W-013-L 08 1/2 12 19 77 7 12 6 27 LPBV-3W-0-L 12 3/4 See 23 92 91 14 83 34 LPBV-3W-02-L 16 1 2 Graph 2 4 170 96 41 LPBV-3W-032-L 1¼ 32 27 118 11 170 2 0 LPBV-3W-038-L 24 1½ 38 31 138 128 170 9 7 LPBV-3W-01-L 32 2 0 36 162 16 260 139 70 * Working Pressure only bar for dangerous fluids 3
VLVES M VLVES LPMV 2-WY M BLL VLVE FEMLE PORTS OR MLE / FEMLE PORTS rawn sand blasted brass body Operates in either direction with handle stops Black reinforced nylon wedge handle (removable in service) Chrome plated brass ball and Teflon seats Handle clearly shows ball position SO 228 BSPP threads Extremely compact design o metal-to-metal moving parts ual sealing system allows valve to be operated in either direction for installation flexibility Seal tested for maximum safety o maintenance ever required rawn sand blasted brass body Finest brass according to E 12164 specifications Chrome plated brass ball for longer life Pure PTFE self-lubricating seats with flexible lip design Blowout proof brass stem FPM O-ring at the stem Black reinforced nylon wedge handle Silicon free lubricant bar non-shock cold working pressure Warning: freezing of the fluid in the installation may severely damage the valve Temp. Range - C to +90 C (refer to pressure - temp graph) Pressure -Temperature Graph Pressure drop Graph ash ominal Bore Ports imensions (mm) (inch) LPMV-FF-003 02 1/8 6 L G H CH 41. 22 22. 31 21 LPMV-FF-006 04 1/4 8 11 41. 22 22. 31 21 F-F LPMV-FF-0 06 3/8 11 41. 22 22. 31 21 LPMV-FF-013 08 1/2 12 13 49 26 22. 33 2 LPMV-MF-003 02 1/8 6 41. 22 22. 31 21 LPMV-MF-006 04 1/4 8 11 41. 22 22. 31 21 M-F LPMV-MF-0 06 3/8 11 41. 22 22. 31 21 LPMV-MF-013 08 1/2 12 13 49 26 22. 33 2 4
LPLH LOCKBLE HLE FOR LOW PRESSURE BLL VLVE Plate head covers the fixing nut to prevent removal when locked acrotised carbon steel body with blue PVC coating Lockable open or closed Handle that can be retrofitted to either 2 way or 3 way ball valves Suits sizes from 1/4 to 2 diameter llows either locking open or closed acrotised carbon steel Blue PVC coating imension shows handle length from the centre of the stem imension h is the height above the standard handle position when assembled on the valves h LPLH-006-013 LPLH-0-02 LPLH-032-01 Requires a padlock size with 9/32 diameter shackle (7.14 mm) Suits Valves imensions (mm) 2-Way 3-Way H LPBV-2W-006 LPBV-2W-0 LPBV-2W-013 LPBV-2W-0 LPBV-2W-02 LPBV-2W-032 LPBV-2W-038 LPBV-2W-01 LPBV-3W-006-L LPBV-3W-0-L LPBV-3W-013-L LPBV-3W-0-L LPBV-3W-02-L LPBV-3W-032-L LPBV-3W-038-L LPBV-3W-01-L 96 8. 117 9. 16. 4 VLVES LOCKG HLES LPTH TW (BUTTERFLY) HLE FOR LOW PRESSURE BLL VLVE Twin handle that can be retrofitted to either 2 way or 3 way ball valves Suits sizes from 1/4 to 1 diameter acrotised carbon steel Yellow PVC coating LPTH-006-013 Suits Valves imensions (mm) 2-Way 3-Way H LPBV-2W-006 LPBV-2W-0 LPBV-2W-013 LPBV-3W-006-L LPBV-3W-0-L LPBV-3W-013-L 96 8. LPTH-0-02 LPBV-2W-0 LPBV-2W-02 LPBV-3W-0-L LPBV-3W-02-L 117 9.
VLVES 6