Installation Instructions RB 500 Motorized Roller Shades Motorized Roller Shade W/ Fascia 5-36 Series-Motor Operation...
Installation Option: Leveller b a c Install the brackets (L or R marked inside) with the screws provided. a) recess b) ceiling c) wall... until the motor plate fits the bracket. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand. IN ST RU CT IO Insert the Plate L into the bracket on the nonoperating side. Turn the Plate L in the rolling off direction () and secure it with the locking clip (). Not necessary when using bracket with leveler. Turn the blind (0 ) in the rolling off direction () and fix it with bracket clip (). Connect the motor and controls in accordance with separately provided instructions. Fix the blind by turning the locking ring against the bearing. Place the front profile in the bracket. Make sure that the profile slides under the nose of the bracket. Place the shade with the tube bearing plug onto the bracket. Push the shade against plug and lift up...
Installation Option: Leveller b a c Fix the bracket (L or R marked inside) with the screws provided. a recess b ceiling c wall... line up teeth of Plate L with bracket and insert. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand. IN ST RU CT IO Insert the front plate into the bracket on the nonoperating side. Turn the front plate in the rolling off direction () and fix it with the bracket clip (). Not necessary when using bracket with leveller. Turn the shade (0 ) in the rolling off direction () and secure it with the locking clip (). Connect the motor and controls in accordance with separately provided instructions. Secure the shade by turning the locking ring on the tube bearing plug furthest away from the bracket. Place the front profile in the bracket. Make sure that the profile slides under the nose of the bracket. Place the blind with the bearing onto the bracket. Push the blind against bearing and lift it up... 3
Option: Leveler To adjust skewing, put the provided Allen key into the screw of the leveler and turn it left or right to move the shade up and down. Support lifting of large heavy shades with the palm of your hand. Connect the motor and controls in accordance with all safety standards. Place the fascia in the bracket. Make sure that the fascia slides under the nose of the bracket. 4
click Push the fascia to snap it into the bracket. Slide the bracket covers onto the brackets. Removal Disconnect power to the motor. Place the screw driver under the bracket cover, turn the screw driver and slide the bracket cover from the bracket. 5
Press the bottom of the fascia upwards () and pull it outwards (). Unfasten the locking ring. Place the screw driver into the slot of the locking clip. Press the locking clip down and turn the shade in the roll-up direction. Push the shade against the tube bearing plug and slide it out of the bracket. 6