F&T APPAREL LLC UNIVERSAL FOLDING & HANGING MANUAL APPENDIX

F&T APPAREL LLC UNIVERSAL FOLDING & HANGING MANUAL APPENDIX - NOVEMBER 2012 Metroplex Corporate Center #1 4000 Chemical Road, Suite 500 Plymouth Meeting, PA 19462-1708 Tel: (610) 828-8400 Fax: (610) 828 5812 November 8th, 2012

Contents 1. FOLD METHOD CODES & DESCRIPTIONS...1 2. PACKING INSTRUCTIONS BY PRODUCT TYPE Sets...2-14 Dresses / Jumpers...15-17 Swimwear...18-34 Underwear...35-42 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 A

FOLD / HANG METHOD CODES & DESCRIPTIONS SET - H10 Vest / Sweater Set - Pant SIDE presentation - Hanging (Option 10) KSET - F6 Knit Set with Overalls - Folded (Option 6) GSET - F1 Girls Infant / Toddler Dress 2pc Set - Folded (Option 1) GSET - F2 Girls Infant / Toddler 2pc Set with Skirt - Folded (Option 2) DRS - F1 Dress / Jumper - Folded (Option 1) SWIM - H1 Swimwear 1pc - Hanging (Option 1) SWIM - H2 Swimwear 2pc - Hanging (Option 2) SWIM - H3 Swimwear 1pc - Hanging (Option 3) SWIM - H4 Swimwear 2pc - Hanging (Option 4) SWIM - F1 Swimwear 1pc - Folded (Option 1) SWIM - F2 Swimwear 2pc - Folded (Option 2) UNDR - F1 Underwear - Boxer Briefs 2 Pack - Folded (Option 1) UNDR - F2 Underwear - Briefs 3 Pack - Folded (Option 2) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 1

SET - H10: Vest / Sweater Set - Pant OPEN presentation - Hanging (Option 10) 1. Put shirt on hanger. 2. Place sweater over the shirt. 2 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SET - H10 3. Hang pant as shown. 4. Hook pant drop hanger OVER the shirt hanger so that pant is at back. FRONT VIEW F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 3

SET - H10 5. Fold sleeves to the back and place garments in a Master poly-bag. (Quantity will be specified in Purchase Order packing requirements.) 6. Fold the whole set in half and tape bag shut. (Except for JC Penney, keep bags open.) 4 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SET - H10 7. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 5

KSET - F6: Knit Set with Overalls - Folded (Option 6) L/S Shirt S/S Shirt L/S Onesie S/S Onesie 1. Fold shirt sleeves to the FRONT. L/S Shirt or Onesie S/S Shirt or Onesie 2. Bring bottom up to collar. Shirt Onesie 6 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

KSET - F6 3. Fold the overall in half (back to back). 4. STACK ALL OF THE PIECES ON TOP OF EACH OTHER: SHIRT on the bottom and OVERALL on the top. F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 7

KSET - F6 5. Place in poly-bag and tape bag shut. 6. Pack individual bags in carton alternating the garment direction. (Poly-bags must be 4" longer than garments.) 8 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

GSET - F1: Girls Infant / Toddler Dress 2pc Set - Folded (Option 1) FRONT VIEW 1. Lay garment flat, back facing up. (Make sure garment back remains flat.) 2. Bring bottom up to collar. F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 9

GSET - F1 3. Lay panty flat and fold left and right sides together. 4. Place folded panty on top of dress as shown. 10 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

GSET - F1 5. Flip the set over, place in poly-bag and tape bag shut. Stacked order: PANTY on the bottom, DRESS on the top. 6. Pack individual bags in carton alternating the garment direction. (Poly-bags must be 4" longer than garments.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 11

GSET - F2: Girls Infant / Toddler 2pc Set with Skirt - Folded (Option 2) L/S Shirt S/S Shirt Cap Sleeve Shirt 1. Lay garment flat, back facing up. If sleeve length allows, Fold sleeves in across back. (Make sure garment back remains flat.) L/S Shirt S/S Shirt Cap Sleeve Shirt 2. Bring bottom up to shoulder edge. L/S or S/S Shirt Cap Sleeve Shirt 12 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

GSET - F2 3. Lay skirt flat and fold left and right sides together 4. STACK ALL OF THE PIECES ON TOP OF EACH OTHER: SKIRT on the bottom and SHIRT on the top. F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 13

GSET - F2 5. Place in poly-bag and tape bag shut. 6. Pack individual bags in carton alternating the garment direction. (Poly-bags must be 4" longer than garments.) 14 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

DRS - F1: Dress / Jumper - Folded (Option 1) FRONT VIEW 1. Lay garment flat, back facing up. Fold LEFT side over approximately 1/4 width of dress. Fold RIGHT side over the same amout as the left. (Make sure garment back remains flat.) 1 1 2 2 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 15

DRS - F1 2. Fold the garment in thirds. 1st Fold: Bring the bottom hem one third of the total length 2nd Fold: Bring fold up to shoulder edge. (The 1st fold length can be increased / decreased if necessary to achieve finished fold dimensions.) W L 2 1 3. Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) 16 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

DRS - F1 4. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 17

SWIM - H1: Swimwear 1pc - Hanging (Option 1) 1. Hang garment as shown. 2. Lay garment flat, back facing up. (Make sure garment back remains flat.) 18 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - H1 3. Bring bottom up to shoulder edge. 4. Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 19

SWIM - H1 5. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) 20 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - H2: Swimwear 2pc Set - Hanging (Option 2) 1. Place top on hanger as shown 2. Lay top flat, back facing up and clip bottoms on hanger centered with top and bottom hanging back-to-back on hanger. BACK VIEW F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 21

SWIM - H2 3. Flip the set over, place in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) 4. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) 22 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - H3: Swimwear 1pc - Hanging (Option 3) Thin Strap Swimsuit Strapless Swimsuit 1. Lay garment flat, back facing up. For Thin strap suits, fold straps down & tuck inside suit. (Make sure garment back remains flat.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 23

SWIM - H3 2. Hang garment as shown. Thin Strap Swimsuit Strapless Swimsuit 3. Bring bottom up to shoulder edge. 24 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - H3 4. Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) 5. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 25

SWIM - H4: Swimwear 2pc Set - Hanging (Option 4) Thin Strap Swimsuit Strapless Swimsuit 1. Lay garment flat, back facing up. For Thin strap suits, fold straps down & tuck inside suit. (Make sure garment back remains flat.) 26 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - H4 2. Clip bottoms on hanger centered with top and bottom hanging back-to-back on hanger. BACK VIEW 3. Flip the set over, place in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 27

SWIM - H4 4. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) 28 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - F1: Swimwear 1pc - Folded (Option 1) Thin Strap Swimsuit Wide Strap Swimsuit 1. Lay garment flat, back facing up. For Thin strap suits, fold straps down & tuck inside suit. (Make sure garment back remains flat.) Thin Strap Swimsuit Wide Strap Swimsuit F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 29

SWIM - F1 2. Bring bottom up to shoulder edge. Thin Strap Swimsuit Wide Strap Swimsuit 3. Place garment in poly-bag and tape bag shut. (Except for JC Penney, keep bags open.) (Quantity will be specified in Purchase Order packing requirements.) Thin Strap Swimsuit Wide Strap Swimsuit 30 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - F1 4. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 31

SWIM - F2: Swimwear 2pc Set - Folded (Option 2) Thin Strap Swimsuit Wide Strap Swimsuit 1. Lay garment flat, back facing up. For Thin strap suits, fold straps down & tuck inside suit. (Make sure garment back remains flat.) Thin Strap Swimsuit Wide Strap Swimsuit 32 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

SWIM - F2 2. Bring bottom up to shoulder edge. 3. Lay swim bottom flat and fold left and right sides together 4. Place folded swim bottom on top of tankini as shown. F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 33

SWIM - F2 5. Flip the set over, place in poly-bag and tape bag shut. Stacked order: SWIM BOTTOM on the bottom, TANKINI on the top. 6. When using Master bags, reverse hanger direction in poly-bag. When using individual bags, reverse hanger direction in carton. (Individual poly-bags must be 4" longer than garments.) 34 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

UNDR- F1: Underwear - Boxer Briefs 2 Pack - Folded (Option 1) FRONT VIEW 1. Stack the two briefs ensuring that the spacing between the waistbands meet measurement requirements. L F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 35

UNDR - F1 2. Flip the set over, back facing up. Place folding board centered at the top of waistband. (Make sure garment backs remain flat.) 3. Fold the stacked garments up. (Make sure they are folded up as far as the board allows.) 36 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

UNDR - F1 4. Fold LEFT sides in across front. Fold RIGHT sides in across so that both sides overlap. (Make sure they are folded across as far as the board allows.) 1 2 5. Flip the set over to front view. Place in polybag and seal shut. FRONT VIEW IN BAG F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 37

UNDR - F1 6. Place quantity and assortment as indicated on the purchase order. 7. Alternate each set and each layer. 38 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

UNDR- F2: Underwear - Briefs 3 Pack - Folded (Option 1) FRONT VIEW 1. Stack the three briefs ensuring that the spacing between the waistbands meet measurement requirements. L F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 39

UNDR - F2 2. Flip the set over, back facing up. Place folding board centered at the top of waistband. (Make sure garment backs remain flat.) 3. Fold the stacked garments up. (Make sure they are folded up as far as the board allows.) 40 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012

UNDR - F2 4. Fold LEFT sides in across front. Fold RIGHT sides in across so that both sides overlap. (Make sure they are folded across as far as the board allows.) 1 2 5. Flip the set over to front view. Place in polybag and seal shut. F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012 41

UNDR - F2 6. Place quantity and assortment as indicated on the purchase order. 7. Alternate each set and each layer. 42 F&T APPAREL UNIVERSAL PACKING MANUAL - APPENDIX OCTOBER 2012