WELDING PROGRAMMES METAL INERT GAS (MIG) WELDING METAL ACTIVE GAS (MAG) WELDING MANUAL METAL ARC WELDING OXY-ACETYLENE WELDING AND CUTTING TARGET: This training is recommended for people who are seeking to improve on their welding skills. TARGET: This training is recommended for people who are seeking to improve on their welding skills. TARGET: This training is recommended for people who are seeking to improve on their welding skills. TARGET: This training is recommended for people who have some skills in this area and are seeking to meet the required standards. DURATION: 5 days. CLASS RATIO: 1 Trainer 6 candidates DURATION: 5 days. CLASS RATIO: 1 Trainer 6 candidates DURATION: 5 days. CLASS RATIO: 1 Trainer 10 candidates. DURATION: 3 days. CLASS RATIO: 1 Trainer 8 candidates. TIG WELDING TARGET: This training is recommended for people who have some skills in this area and are seeking to meet the required standards. DURATION: 4 days. CLASS RATIO: 1 Trainer 6 candidates. 3G CODED WELDING TARGET: Welders seeking international certification and coding. New entrants into the field who seek a career path in industry. DURATION: 9 weeks. CERTIFICATION: American Welding Society CODING TYPE: SMAW -3G- E7018 WELDING, FABRICATION AND PIPEWORK: Entry level LEVEL 1 ENGINEERING IN WELDING CITY & GUILDS CERTIFIED PROGRAMMES View course detail on: www.tasc.co.ug BASIC ELECTRICAL ENGINEERING Entry level BASIC ELECTRICAL INSTALLATION Entry level LEVEL 1 ENGINEERING IN ELECTRICAL Earn a Skills Foundation Certificate (Basic Engineering Skills) that enables the candidate to carry safe working practices and procedures to ensure the safety of themselves & others This course aims to help learners find out about working in engineering covering the basic skills & knowledge needed to enter engineering or manufacturing One of the key outcomes of this course is that the candidate will be able to exhibit safe work practices to ensure safety for themselves others This course allows the learner to acquire underpinning knowledge & related skills of electrical installation & use of standard regulations & working This course gives the learner an opportunity to develop a wide range of skills in many areas of engineering working in our purpose built training workshops by industry standards.
SHORT COURCES IN ELECTRICAL BASIC ELECTRICITY ELECTRICAL PRINT READING ANSI ELECTRONICS FOR ELECTRICIANS SHORT-CIRCUIT ANALYSIS TARGET: This course is intended for new or cross-training technicians, electricians TARGET: This hands-on course is intended for new or experienced electricians and TARGET: This hands-on course is intended for new or experienced electricians and technicians TARGET: This course is intended for engineers, supervisors, electricians and and supervisors responsible for technicians that install, maintain, repair or whose job responsibilities will require them to technicians that are involved in maintenance of electrical equipment. The troubleshoot power and auxiliary systems. install, repair or replace electronic components equipment selection/evaluation and participant should bring a trigonometric The participant should have basic in electrical systems. protection of industrial and utility power calculator. knowledge of power system components. systems. The student should have basic knowledge of power system equipment and mathematics. WORKER PROTECTION TRAINING PROGRAMMES FIRST AID WORKER FIRST AID WORKER REFRESHER EMERGENCY FIRST RESPONSE AWARENESS IN GESTURES & POSTURES TARGET: Any persons required to manually handle loads or conduct repetitive actions in the course of their work. TARGET: Designated person or volunteer to provide first aid assistance in the event of an accident in the company. OBJECTIVE: Learn to recognize the risks and provide first aid assistance to limit incidents and reduce the consequences after an accident. TARGET: SST card holder OBJECTIVE: update first aid skills INRS approved trainer/instructor CERTIFICATION: SST CARD TARGET: Designated person or volunteer to provide first aid assistance in the event of an accident in the company. OBJECTIVE: Know how to alert and recognize the risks. Know how to provide first aid to limit incidents and reduce the consequences after an incident. OBJECTIVE: Improve work conditions through a collective prevention approach.
PREVENTION OF ELECTRICAL HAZARDS (H0/B0) TARGET: Non electricians working in zones where there are electrical hazards. AWARENESS IN WORK AT A HEIGHT TARGET: Any persons required to work at a height. RISKS RELATED TO LIFTING & HANDLING ON CONSTRUCTION SITES TARGET: Any persons required to guide or prepare a load. INTERVENTION IN CONFINED SPACES TARGET: Personnel required intervening in a facility. OBJECTIVE: Be aware of, understand and apply the basic principles of electrical safety to allow each employee to reduce risks in the workplace. or at your premises Number of participants: 4 to 14 OBJECTIVE: Know which equipment to use and work in complete safety! or at your premises Validity: 1 year OBJECTIVE: Know which equipment to use and work in complete safety! OBJECTIVE: Know which equipment to use and work in complete safety! or at your premises USE OF BREATHING APPARATUS (A.R.I.C.O) TARGET: Any persons required to wear self contained breathing apparatus. NOTE: should be medically fit to wear the breathing apparatus. OBJECTIVE: Know which equipment to use and work in complete safety! ROOT CAUSE ANALYST (Methodology) AWARENESS OF H2S RISKS ATEX EXPLOSIVE ATMOSPHERES AWARENESS TARGET: Any persons required to coordinate an analysis team following an incident or accident. OBJECTIVE: Be capable of coordinating or participating in a work group in charge of analyzing an accidental event (near accident, incident, accident, etc.). Place: Training center or in your company premises Number of participants: 4 to 14 TARGET: Staff working on or adjacent to plants at risk of hydrogen sulphide. OBJECTIVE: Know how to react in the event of gas detection or alarm! or at your premises TARGET: Any person required to work in an ATEX zone. OBJECTIVE: Know how to react in the event of gas detection or alarm! or at your premises
SAFETY & ENVIRONMENTAL OFFICER TARGET: Any persons wishing to deepen or broaden their knowledge on the subject. OBJECTIVE: Avoid recurrence to sustain the company's activity and its profitability! or at your premises HSE SAFETY INDUCTION (Complies w TOTAL Group Standards-Module 7) TARGET: All TEPC employees and all staff visiting the site for an intervention. OBJECTIVE: Without Module 7 you cannot access the facilities TOTAL E&P CONGO. or your premises Validity: 3 years SAFETY TRAINING PROGRAMMES SURVIVAL AT SEA, FIRE & FIRST AID (Complies w TOTAL Group Standards- Module 30) TARGET: Any persons wishing to access a TOTAL offshore site, not using the helicopter as a means of transport. OBJECTIVE: Without this module you may not go on board! HSE SAFETY INDUCTION (Complies w ENI Group standards-eni Badge A) TARGET: Any persons wanting to access an ENI site. OBJECTIVE: Without Badge A, you may not intervene on an ENI installation. or at your premises ONSHORE SAFETY COURSE (Complies w ENI Group standards-eni Badge B) TARGET: Any persons wanting to access an ENI onshore site. OBJECTIVE: Without Badge B, you may not intervene on an ENI onshore installation. OFFSHORE SAFETY COURSE (Co;plies w ENI Group Standards-ENI Badge C&D) TARGET: Any persons wanting to access an ENI offshore site. OBJECTIVE: Without Badges C & D, you may not intervene on an ENI offshore installation. FIRST RESPONSE TEAM MEMBER (use of extinguishers) TARGET: Designated or voluntary industrial personnel who may be required to intervene on the start of a fire or help evacuate the building. OBJECTIVE: Mastering fire safety. RC1 (Firefighting Team Member on Oil Site) TARGET: Non-firefighter company staff required to be part of the fire response team. OBJECTIVE: Effectively handling a disaster does not just happen!
SECOND RESPONSE TEAM MEMBER TARGET: The staff of the industrial and service company already trained as First Response Team Members. Note: must be medically fit to wear the breathing apparatus. OBJECTIVE: Know how to deal with an accident BESPOKE DEFENSIVE DRIVING: Light vehicles 4x4 TARGET: Any persons needing to drive a vehicle. Note: Must have a valid driver's licence. OBJECTIVE: Reduce the risk related to road traffic (mission or journey) in your company! Number of participants: 2 to 8 Recommended validity: 2 years SAFETY TRAINING PROGRAMMES BESPOKE DEFENSIVE DRIVING: Heavy goods vehicles TARGET: Any persons needing to drive a heavy vehicle. Note: Must be in possession of a valid driver's licence. OBJECTIVE: Reduce the risk related to road traffic (mission or journey) in your company! or at your premises Number of participants: 2 to 8 Recommended validity: 2 years BESPOKE DEFENSIVE DRIVING: Super heavy goods vehicles TARGET: Any persons needing to drive a heavy vehicle. Note: Must be in possession of a valid driver's licence. OBJECTIVE: Reduce the risk related to road traffic (mission or journey) in your company! with your vehicles or at your premises Number of participants: 2 to 8 Recommended validity: 2 years SCAFFOLDING ASSEMBLY/DISMANTLING TARGET: Any persons who, as part of their work, are required to assemble and dismantle fixed scaffolding. Note: Medical fitness to work at the required height. No restrictions on carrying loads. First Aid (D.A.N) SCAFFOLDING VERIFICATION CACES No.3 FORK LIFT TRUCK OPERATOR BASIC SAFETY TRAINING compliant with the Standards of the International Maritime Organisation (BST STCW 95) TARGET: Any persons required to check the assembly of fixed scaffolding. Note: should be medically fit to work at a height. Basic Life Support (D.A.N) TARGET: Personnel required to drive fork lift trucks. (Safety driving certificate) Place: at your premises with your equipment Number of participants: 4 to 8 TARGET: All professional sailors, from able seaman to captain, must receive BST STCW95 training. Length: 5 days ( 1 day) This course will give you all the necessary first aid skills to deal with a whole range of workplace & public injuries. This course will help prepare you to handle cardiovascular events and other life-threatening incidents. Certified by the divers alert network (Europe)
BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING (BOSIET) TARGET: Any persons wanting to access an offshore site. Validity 4 years ( 1 jour) FURTHER OFFSHORE EMERGENCY TRAINING (FOET) TARGET: Any persons wanting to refresh their BOSIET OPITO Validity: 4 years ( 1 day) OPITO CERTIFIED COURSES HELICOPTER UNDERWATER ESCAPE TRAINING (HUET) TARGET: Any persons wishing to access an offshore site and required to use a helicopter as a means of transport. Validity: 4 years ( 1 day) TROPICAL FURTHER OFFSHORE EMERGENCY TRAINING (T-FOET) TARGET: Any persons wanting to refresh their T BOSIET OPITO. Validity: 4 years ( 1 day) INTRODUCTION TO ISPS International Ship & Port Security PORT SECURITY ISPS SECURITY OFFICER International Ship & Port Security TARGET: Staff of the port environment required to work with equipment and ergonomic organisation of a ship, a port or a maritime company. TARGET: Security officer on board ships, in ports and in maritime companies. OBJECTIVE: Take effective and proportional measures against safety incidents