Highway Media Range...6.2 Termination Modules...6.4 HighBand Solutions...6.6 Printed Circuit Board Termination Modules...6.7 Distribution Systems...6.9 Connection Tools...6.15 Labelling...6.17 Accessories...6.20 Overvoltage Protection...6.23 Test and Patch Cords...6.24 Patch Panels...6.30 Outlets...6.31 Faceplates...6.33 Adaptors...6.37 Cable...6.38 6.1
Highway Media Range Highway Media Outlet Can be mounted in Keystone surface mount boxes and faceplates. The Highway Media 8-position 4-contact Outlet is the standard carrier telephone connection in Australia. The gel-filled Outlet is ideal for harsh environmental conditions. Termination caps are included to help maintain a solid, long term connection. Highway Media Standard Outlet Bag of 10 Grey 6467 1 105-00 Highway Media Standard Outlet Bag of 100 Grey 6467 4 105-10 Highway Media Gel Filled Outlet Bag of 10 Black 6467 1 106-00 Highway Media Mode 3 Switching Outlet Can be mounted in Keystone surface mount boxes and faceplates. Mode 3 Outlet bridges contacts 3-4 and 5-6 when the plug is withdrawn. Essential for alarm systems and other applications that cannot afford accidental interruption. Termination caps are included to help maintain a solid, long term connection. Highway Media Standard Outlet Highway Media Mode 3 Switching Outlet Bag of 10 Blue 6467 1 107-00 Highway Media Surface Mount Box, unequipped Used for surface mount applications where the wall cavity is not accessible. Designed to accommodate Highway Media Outlets. Highway Media Mode 3 Switching Outlet Highway Media Unequipped Surface Mount Box, SMK1 Highway Media Unequipped Surface Mount Box, SMK1 Box of 10 White 6467 1 112-00 Highway Media Unequipped Surface Mount Box, SMK2 Box of 10 White 6467 1 113-00 6.2
Highway Media Range Highway Media Flush Mount Plate These Flush Mount Plates are sleek and modern in design. The product includes ADC KRONE s unique rotational adaptor that allows for mounting of any Keystone style outlet in either the vertical or horizontal positions and removal of the outlet without removing the plate from the wall. Highway Media Flush Mount Plate Highway Media Single Flush Mount Plate Box of 10 White 6467 1 108-00 Highway Media Dual Flush Mount Plate Box of 10 White 6467 1 110-00 Highway Media Wall Phone Mounting Kit Designed to fit onto a wall for mounting of a wall phone. The Kit includes a baseplate, cover plate, flylead and unique rotational adaptor. Highway Media Wall Phone Mounting Kit Highway Media Wall Phone Mounting Kit Box of 10 White 6467 1 114-10 Highway Media Shutter These Shutters are spring loaded to ensure that when the outlet is not in use it is protected from the ingress of dust and insects. It also protects against accidental finger contact inside the outlet. Designed for use with all Highway Media Outlets. Highway Media Shutter Highway Media Shutter Bag of 10 White 6467 1 115-00 Clear Cover for Highway Media Faceplates Designed as a protective cover to be placed over the Highway Media faceplates for protection when the wall is being painted. Highway Media Cover Clear Plastic Cover Plate Bag of 10 Clear 6467 1 118-00 6.3
Termination Modules HighBand 10 Disconnect Module Category 5e Disconnect Module for termination of 10 incoming and 10 outgoing pairs. Pairs numbered 1-10. Ideal for use in backbone cabling where high density and disconnect features are required. Can be used in a Patch-by-Exception solution. For mounting on both Profil and Backmount frames. HighBand 10 Disconnect Module with JRP10 Pack of 10 6468 5 061-00Y HighBand Compact 8 Disconnect Module Compact Category 5e Module for termination of 2, 4-pair cables. Pairs numbered 1-8. For mounting on Profil or Backmount frames specially designed for an 8-pair footprint only. HighBand Compact 8 Disconnect Module with JRP10 Pack of 10 6468 5 061-08Y HighBand 10 Switching Module Category 5e Switching Module for termination of 10 incoming and 10 outgoing pairs. Ideal for use in backbone cabling where high density is required. Cannot be used in a Patch-by-Exception solution. For mounting on both Profil and Backmount frames. HighBand 10 Disconnect Module HighBand Compact 8 Disconnect Module HighBand 10 Switching Module HighBand 10 Switching Module with JRP10 Pack of 10 6468 5 081-00Y 6.4
Termination Modules 2/10 Profil Switching Module Switching module for wiring up to 20 pairs (depending on the application). The overall diameter of the single wires can range from 0.7m to 1.6m 2/10 Profil Switching Module Each* 6089 1 126-00 * ADC KRONE only accepts orders in multiples of 10 2/10 Profil Disconnection Module Disconnection module for 8 or 10 pairs with disconnection point for opening the line, testing in both directions or the insertion of graded protection elements. 2/8 Profil Disconnection Module Each 6036 1 005-00 2/10 Profil Disconnection Module Each* 6089 1 121-02 * ADC KRONE only accepts orders in multiples of 10 2/10 Profil Connection Module Connection module for 8 or 10 pairs with parallel test access or overvoltage protection contact. 2/10 Profil Switching Module 2/10 Profil Connection Module Each* 6089 1 120-02 * ADC KRONE only accepts orders in multiples of 10 2/10 Profil Disconnection Module 2/10 Profil Connection Module 6.5
HighBand Solutions HighBand ComProtect HB/1 CP CHGB180A1 O/V & O/C For 5 point over-voltage and over-current protection of single pairs on the HighBand 10 Disconnect Module. HighBand ComProtect HB/1 CP CHGB180A1 O/V & O/C Kit** 8800 1 010-18 ** 1 kit = 10 pcs with 1 pc Earth Bar HighBand ComProtect HB/1 CP CAA180A1 O/V For 5 point over-voltage and over-current protection of single pairs on the HighBand 10 Disconnect Module. Description Quantity Product No. HighBand ComProtect HB/1 CP CAA180A1 O/V, Cat 5e Certified Kit** 8800 1 010-28 ** 1 kit = 10 pcs with 1 pc Earth Bar Earthrail 2/8 Used in conjunction with ComProtect single pair overvoltage protection to protect lines against power surges such as lightning and mains contact. Description HighBand ComProtect HB/1 CP CHGB180A1 O/V & O/C HighBand ComProtect HB/1 CP CAA180A1 O/V, Cat 5e certified Earthrail 2/10 & 2/8 Quantity Product No. Earthrail 2/8 Each 5909 3 042-00 Earth Clip Used in ADC KRONE termination modules to provide an earth connection to a Profil frame for overvoltage protection devices. Earth Clip Description Quantity Product No. Earth Clip Each 6089 3 202-00 6.6
Printed Circuit Board Termination Modules PCB Connector 3 and 4-pole Connectors for terminating conductors which interface with a printed circuit board. Pin spacing is 5.08mm. No printing on Connector. PCB Connector, 3-pole Bag of 100 6468 5 001-13 PCB Connector, 4-pole Bag of 100 6468 5 001-14 3 Pole PCB Connection Module 6468 5 001-13 4 Pole PCB Connection Module 6468 5 001-14 Ø1.2 +0.1 Ø1.2 +0.1 Ø2.0 +0.1 2.54 grid Ø2.0 +0.1 3-pole PCB Connector 2.54 grid 6.7
Printed Circuit Board Termination Modules High Density PCB Connector 2 or 4-pole Connectors for terminating conductors which interface with a printed circuit board. No printing on Connector. Pin spacing of all connectors is 3.81mm. PCB Module (2x8 way), normally open Contacts are normally open, providing a capacity of 16 discrete wire connections interfacing with a printed circuit board. No printing on Module. High Density Connector, 6-pole High Density Connector, 2-pole Box of 1000 6048 1 007-02 High Density Connector, 4-pole Box of 1000 6048 1 007-04 PCB Module 2x8 way, normally open PCB Module 2x8 way, normally open Box of 36 6468 5 003-00 6.8
Distribution Systems Backmount Frame 2/10-21 Way Backmount frame for LSA-PLUS, series 2 for assembling in CCC Backmount Frame 2/10-21 Way Each 5267 3 585-01 Backmount Frame 2/10-31 Way Each 5267 3 585-02 Backmount Frame 2/10-41 Way Each 5267 3 585-03 Backmount Frame 2/10 LSA-PLUS Backmount frames consist of U-shaped stainless steel sheet, hole pattern #1. This means a high degree of stability and full corrosion resistance. Depending on requirement, backmount frames can be used to accommodate various numbers of modules as mentioned in the tables below. When selecting the frame depth, we recommend: - Backmount frame up to 70 pairs -> 12mm depth - Backmount frame up to 100 pairs -> 22mm depth - Backmount frame up to 200 pairs -> 30mm depth - Backmount frame 200 pairs and more -> 50mm depth Backmount Frame 2/10, hole pattern #2, 22.5mm, 31 way Backmount Frame 2/10, hole pattern #1, 22.5mm, 10 way, 30mm deep Backmount Frame 2/10, 22.5mm, 1 way, 12mm deep Each 6050 3 112-01 Backmount Frame 2/10, 22.5mm, 2 way, 12mm deep Each 6050 3 112-02 Backmount Frame 2/10, 22.5mm, 2 way, 22mm deep Each 6050 3 122-02 Backmount Frame 2/10, 22.5mm, 3 way, 22mm deep Each 6050 3 122-03 Backmount Frame 2/10, 22.5mm, 5 way, 22mm deep Each 6050 3 122-05 Backmount Frame 2/10, 22.5mm, 5 way, 30mm deep Each 6050 3 130-05 Backmount Frame 2/10, 22.5mm, 6 way, 30mm deep Each 6050 3 130-06 Backmount Frame 2/10, 22.5mm, 10 way, 30mm deep Each 6050 3 130-10 Backmount Frame 2/10, 22.5mm, 11 way, 30mm deep Each 6050 3 130-11 Backmount Frame 2/10, 22.5mm, 6 way, 50mm deep Each 6050 3 150-06 Backmount Frame 2/10, 22.5mm, 10 way, 50mm deep Each 6050 3 150-10 Backmount Frame 2/10, 22.5mm, 11 way, 50mm deep Each 6050 3 150-11 Backmount Frame 2/10, 22.5mm, 20 way, 50mm deep Each 6050 3 150-20 Backmount Frame 2/10, 22.5mm, 21 way, 50mm deep Each 6050 3 150-21 Backmount Frame 2/10, 22.5mm, 30 way, 50mm deep Each 6050 3 150-30 Backmount Frame 2/10, 22.5mm, 31 way, 50mm deep Each 6050 3 150-31 6.9
Distribution Systems 108A Distribution Frame (1380 pairs) Modular frame for 1380 pairs using LSA-PLUS modules. May be mounted back to back, side by side, wall mounted or free standing. Complete with detachable legs. Dimensions: 2004(H)*x560(W)x150(D)mm Weight: 29kg 108A Distribution Frame (1380 pairs) +1 pair legs + 1 earth bar Box of 1 6420 1 013-00 LSA-PLUS Wall-mounted Distribution Frame Assembly Kit The LSA-PLUS wall-mounted distributor is a quick mounting rack which can accommodate up to 4 self-supporting backmount frames. Depending on the purpose of the distributor, the backmount frames can be equipped with connection or disconnection modules of the LSA-PLUS Series 2 range. Each kit has a distribution capacity of up to 1600 pairs. 108A Distribution Frame (1380 pairs) Wall-mounted Distribution Frame Assembly Kit Wall-mounted distribution frame assembly kit Each 6577 1 011-04 6.10
Distribution Systems Universal 1,400-pair frame, dual columns, Backmount Frame Modular frame for 1400 pairs using LSA-PLUS modules. May be mounted back to back, side by side, wall mounted or free standing. Complete with detachable legs. Dimensions: 2004(H) x570(w)x150(d)mm Universal 1,400-pair Frame, dual columns, Backmount Frame Universal 700-pair frame, single-column, Backmount Frame with 1 pair of legs Box of 1 8817 1 020-01 Universal 1,400-pair frame, dual columns, Backmount Frame with 1 pair of legs Box of 1 8817 1 020-02 Legs for the universal 700/1400 pairs frame Box of 2 8817 1 020-03 Wall mounting bracket Box of 2 8817 1 020-04 6.11
Distribution Systems 19" Backmount Frame Backmount Frame for 19" rack mounting. Capable of holding 3, 15 or 18 Series 2 or HighBand modules. 18 way Backmount Frame Backmount Frame, 15 way (3RU) Box of 1 6450 1 008-00 19" Backmount Frame, recessed Backmount Frame for 19" rack mounting. Capable of holding 9 or 15 Series 2 or HighBand modules. Recessed to allow better clearance for doors on 19" racks. 9 way Recessed Backmount Frame Backmount Frame, 9 way (2RU) Box of 1 6450 2 009-00 Backmount Frame, 15 way (3RU) Box of 1 6450 2 006-00 6.12
Distribution Systems Kronection Box Kronection Box Size I Allows for mounting of up to 30 pairs (3 x 10-pair modules). Kronection Box Size II Allows for mounting of up to 60 pairs (6 x 10-pair modules). Kronection Box Size III Allows for mounting of up to 100 pairs (10 x 10-pair modules). These boxes are not waterproof. Backmount Frame sold separately. Not suitable for MDF enclosure unless Kronection Box Attachment Frame is also used. Kronection Box, Size I Kronection Box, Size I Box of 1 6455 1 021-00 Kronection Box, Size II Box of 1 6455 1 022-00 Kronection Box, Size III Box of 1 6455 1 023-00 Distribution Box (IP54) External, weatherproof boxes. Each box has a lock. Accommodates 50 pairs (5 x 10-pair modules). Accommodates 100 pairs (10 x 10-pair modules). Suits Profil modules only. Suitable for MDF enclosure. Distribution Box Distribution Box 50-pair Box of 1 Grey 6455 1 061-10 Distribution Box 100-pair Box of 1 Grey 6455 1 061-20 Kronection Box A30 (IP55) The A30 Kronection Boxes are designed to accommodate up to three LSA-PLUS modules.the Box can be mounted directly on a wall or pole. The cover has a special hinge, which keeps it open during installation work so that it functions as protection against the rain. Suitable for MDF enclosure. Kronection Box A30 Kronection Box A30 without lock Box of 1 White 6462 2 085-10 Kronection Box A30 with lock and key Box of 1 White 6462 2 065-11 6.13
Distribution Systems Kronection Box Attached Frame Used for increasing the depth of a Kronection Box to allow for the installation of overvoltage protection components and making it suitable as an MDF enclosure. Attached Frame, Size I Kronection Box Attached Frame, Size I Box of 1 6436 3 003-20 Kronection Box Attached Frame, Size II Box of 1 6406 3 003-20 Kronection Box Attached Frame, Size III Box of 1 6437 3 003-20 Kronection Box Levelling Frame Used when flush mounting a Kronection Box. Levelling Frame, Size I Kronection Box Levelling Frame, Size I Box of 1 6436 2 004-20 Kronection Box Levelling Frame, Size II Box of 1 6406 2 004-20 Kronection Box Levelling Frame, Size III Box of 1 6437 2 004-20 6.14
Connection Tools Connection Strip LSA-PLUS Connection Modules 10 pairs, with a fixing dimension of 96mm and 20 pairs, with a fixing dimensions of 170mm. There are earth contacts at both ends of the module for connecting earth and special-purpose wires. Two screws are used to mount the LSA-PLUS module Housing color: grey Connection Tool with Sensor Used to terminate and cut wires on all ADC KRONE communication modules and RJ outlets. The sensor ensures full insertion and termination of the conductor. The sensor also helps with double jumpering, by sensing the correct position for the second wire before cutting. The cutting action can also be turned off, so that it does not cut at all for applications such as daisy chaining. Used to terminate wires with a diameter of 0.4 0.9mm and insulation of 0.7 1.9mm. Connection Strip 1/10 Connection Strip 1/20 Connection Strip 1/10 Each 6196 2 001-02 Connection Strip 1/20 Each 6196 2 002-02 Connection Tool with Sensor Connection Tool with Sensor Bag of 1 6417 2 055-01 6.15
Connection Tools Universal Insertion Tool This connection tool is specifically designed to suit the Category 6 A Right Angle Outlet, but can be used on all ADC KRONE LSA-PLUS modules and RJ45 outlets. This tool can also be used in lieu of the 110 connection tool. Universal Insertion Tool Universal Insertion Tool Each 6537 1 500-00 KM8 Termination Aid Used to assist with the termination of multiple KM8 outlets. KM8 Termination Aid KM8 Termination Aid Bag of 1 6830 1 490-00 6.16
Labelling Label Holder 2/8 Fits Series 2 modules, 8 or 10 pair. Fixing on the first or last position of the backmount frame is recommended. Requires the space of one connection module on Backmount frames 2/8 or 2/10 Label Holder 2/8, blank, label size 75mm x 13mm Each 6036 2 018-00 Hinged Label Holder Can be snapped onto LSA-PLUS and LSA-Profil modules, as well as onto overvoltage magazines, with a transparent cover and a paper label. For label holders 2/8 (dimensions W x H in mm are: 83.3 x 11.5) and for label holders 2/10: (102.5 x 11.5). Label Holder 2/8, blank, label size 75x13 Hinged Label Holder 2/10 Hinged Label Holder 2/10 Each 6089 2 015-01 Hinged Label Holder 2/8 Each 6036 2 005-02 Label Holder Designed for universal use with backmount frames and Profil rod systems for vertical identification, with label blank. It requires the space of one connection module in the backmount frame / Profil rod system. Label size: 95 x 18mm or 75 x 18 mm Label Holder 2/10 (95mm Profil spacing), Profil Label Holder 2/8 (75mm Profil spacing), Profil Each 6753 2 008-00 Label Holder 2/10 (95mm Profil spacing), Profil Each 6753 2 009-00 6.17
Labelling Diposable Insertion Tool For the termination of cabling components without soldering, wire stripping or the use of screws. Universally applicable for LSA-PLUS modules, Series 1 to 10, LSA-PLUS NT and RJ45 jacks with LSA-PLUS contacts. The insertion tool produces a gas-tight contact; without the scissors mechanism it can be used to terminate wires with a conductor diameter range from 0.35mm to 0.9mm, with an outer diameter of 0.65mm to 2.6mm. Service life > 100 terminations. Disposable Insertion tool Each 6417 1 830-00 Cable Protection Rings To be mounted at the rear/side of the backmount frame; cable entries (15mm diam.). For protection of insulation when cable bundles are fed through the backmount frame. Cable Protection Ring Each 6050 3 044-00 Edge Protection Strip Product for worker safety for use in partially equipped backmount frames. It is placed over unused backmount frame fingers. Disposable Insertion tool Cable Protection Ring Edge Protection Strip Length 60mm Edge Protection Strip Length 60mm Each 6092 3 017-01 Edge Protection Strip Length 120mm Each 6092 3 017-00 6.18
Labelling HighBand Clear Label Holder Clear clip on label holder with paper labels supplied. To suit HighBand 10-pair modules. Can also be used on all Series 2, 10-pair modules. HighBand Clear Label Holder HighBand Clear Label Holder Bag of 10 6462 2 096-00 HighBand Label Holders The HighBand Label Holder clips into position in 3 locations, providing a secure fit allowing patching of cords whilst labelling stays in place. Label Holder For insertion onto LSA-PLUS modules, Series 1. Includes transparent cover and paper label. Label Holder 1/10 Each 6196 2 005-00 Label Holder 1/20 Each 6196 2 006-00 Backmount Label Holder A means of labelling a group of modules. Occupies one module position. Label Holder HighBand Label Holders Box of 12 6462 2 408-01 Label Holder 1/10 Backmount Label Holder Module label holder 2/10 blank Label Size (WxH) in mm: 95 x 25 Bag of 1 6092 2 012-01 Module label holder 2/10 blank Label Size (WxH) in mm: 95 x 17.9 Bag of 1 6092 2 012-02 6.19
Accessories Spacer For creating a uniform pitch on profil rods. *** ADC KRONE only accepts orders in multiples of 20 HighBand Identification Cap Used for the identification of individual circuits on HighBand modules. Spacer 2.5mm Spacer 2.5mm Each*** 6619 2 046-00 Spacer 5 mm Each*** 6619 2 046-01 HighBand Identification Cap (module not included) HighBand Identification Cap Bag of 20 Blue 6462 2 101-00 HighBand Identification Cap Bag of 20 Red 6462 2 101-01 HighBand Identification Cap Bag of 20 Green 6462 2 101-02 HighBand Identification Cap Bag of 20 Yellow 6462 2 101-03 Dummy Plug Universal plug accessories for the LSA-PLUS and LSA Profil modules, series 2. Dummy Plug Each* Red 6417 3 105-00 * ADC KRONE only accepts orders in multiples of 100 Dummy Plug 6.20
Accessories HighBand Disconnection Plug, 1-pair Plugs for disconnecting a circuit. Can only be used on HighBand 8-pair, 10-pair and 25-pair modules. Series 2 Disconnection Plug, 1-pair Plugs for disconnecting a circuit. Can only be used on Series 2 Disconnect Modules. HighBand Dummy Plug Used to identify specific lines and prevent the accidental interruption of transmission. Plug is inserted into module, but does not disconnect the contacts or break the circuit. HighBand 1-pair Disconnection Plug HighBand Disconnection Plug, 1-pair Bag of 20 White 6462 2 097-00 HighBand Disconnection Plug, 1-pair Bag of 20 Red 6462 2 097-10 HighBand Disconnection Plug, 1-pair Bag of 20 Green 6462 2 097-20 Series 2 Disconnection Plugs Series 2 Disconnection Plugs, 1-pair Box of 100 Red 6089 3 055-00 Series 2 Disconnection Plugs, 1-pair Box of 100 Green 6089 3 055-02 HighBand Dummy Plug HighBand Dummy Plug Bag of 100 Red 6451 5 035-00 6.21
Accessories Keystone Blanking Cap For use in Keystone patch panels. The Blanking Cap clips into any unoccupied ports for aesthetic purposes. May only be used where no outlets are installed. Blanking Cap Blanking Cap Bag of 10 Black 6450 2 021-00 Keystone Dust Cover For insertion into the face of the Keystone RJ45 outlet to prevent dust from entering and contaminating the contact area. A single plastic insert that fits directly into the front of the outlet. Note: should not be used with KM8 outlet. Keystone Dust Cover Keystone Dust Cover Bag of 25 Ivory 6467 1 103-00 Keystone Dust Cover Bag of 25 Grey 6467 1 103-01 Dust Cover For mounting in FMK and SMK RJ45 outlets. Prevents dust from entering and contaminating the contact area. Provides child safety against finger insertion, can be used in education and child minding facilities. Dust Cover Dust Cover Bag of 10 White 6467 2 031-20 6.22
Overvoltage Protection LSA-PLUS Over Voltage Protection Magazine, 2/10 with 3-pole GD Tube Recommended for use as basic overvoltage protection in analog telecommunication systems. The magazines are designed for the complete equipping of LSA-PLUS Profil disconnection or connection modules. For installation in LSA Profil distributors earth contact clips are required to establish earth contact with the Profil rods. Description Quantity Product No. LSA-PLUS Over Voltage Protection Magazine, 2/10 with 3-pole GD Tube Each* S6089 2 023-08 * ADC KRONE only accepts orders in multiples of 10 Series 2 Earth Bar Used in conjunction with ComProtect single pair overvoltage protection to protect lines against power surges such as lightning and mains contact. LSA-PLUS Over Voltage Protection Magazine,2/10 Series 2 Earth Bar Series 2 Earth Bar 2/10 Bag of 1 5909 3 041-00 6.23
Test and Patch Cords HighBand to Series 2 Patch Cord, 1 Pair Used for patching between 1 pair on a HighBand module to 1 pair on a Series 2 Disconnection Module. Description Quantity Length Product No. HighBand to Series 2 Patch Cord, 1 pair Pack of 2 2m 6451 2 059-21 HighBand to Series 2 Patch Cord, 1 pair Pack of 2 3m 6451 2 059-31 HighBand to Series 2 Patch Cord, 1 pair Pack of 2 5m 6451 2 059-51 HighBand Patch Cord, 1 or 2 pair For use on all HighBand modules, provides 1 pair patching on HighBand 8 and 10 or 2 pair patching on HighBand 16 and 20. Can be used in the Patch-by-Exception solutions to break the original circuit and patch the signal to a new location (HighBand 8 and 10 modules only). HighBand to Series 2 Patch Cord, 1 pair HighBand Patch Cord, 1 or 2 pair Description Quantity Length Product No. HighBand Patch Cord, 1 or 2-pair Pack of 2 2m 6451 2 048-21 HighBand Patch Cord, 1 or 2-pair Pack of 2 3m 6451 2 048-31 HighBand Patch Cord, 1 or 2-pair Pack of 2 5m 6451 2 048-51 6.24
Test and Patch Cords HighBand 10 Test Cord, 4-pair to RJ4 Used for 4-pair testing on HighBand 10 modules. RJ45 end allows connection to test equipment. HighBand 10 Test Cord, 4-pair to RJ45 Description Quantity Length Product No. HighBand 10 Test Cord, 4-pair to RJ45, monitoring Each 3m 6451 2 099-30 HighBand 10 Test Cord, 2-pair to RJ45, monitoring Each 3m 6451 2 100-30 HighBand 10 Patch Cord, 4-pairs to 4-pairs Used to patch 4 pairs on HighBand 10 modules only. Can be used in a Patch-by-Exception solution to break the original circuit and patch the signal to a new location. HighBand 10 Patch Cord, 4-pairs to RJ45 HighBand 10 Patch Cord, 2-pairs to RJ45 Description Quantity Length Product No. HighBand 10 Patch Cord, 4-pairs to 4-pairs Bag of 2 3m 6451 2 101-30 HighBand 10 Patch Cord, 4-pairs to RJ45 Bag of 2 3m 6451 2 102-30 HighBand 10 Patch Cord, 2-pairs to RJ45 Bag of 2 3m 6451 2 104-30 6.25
Test and Patch Cords Test Cord 2/2, Banana Sockets 2-pole test cord; fittet with one LSA-PLUS plug and two 4mm banana plugs. Test Cord 2/2, 2 x Banana Sockets Test Cord 2/2, 2 x Banana Plugs Description Quantity Length Product No. Test Cord 2/2, 2 x Banana Sockets Each 2m 6624 2 040-02 Test Cord 2/2, 2 x Banana Sockets Each 0.2m 6624 2 040-09 Test Cord 2/2, 2 x Banana Plugs Each 2m 6624 2 061-02 Test Cord 2/2, 2 x Banana Plugs Each 6m 6624 2 061-06 Test Cord 2/2, Both Ends 2-pole connection cord; fittet with two LSA-PLUS plugs 2/2 for parallel connection. Description Quantity Length Product No. Test Cord 2/2, both ends Each 2m 6624 2 081-02 Test Cord 2/2, both ends Each 6m 6624 2 081-06 Plug Set 2-pole Assembly, printed - Plug kit for user assembly - For parallel connection - Soldering contact Test Cord 2/2, both ends Plug Set 2-pole Assembly Plug Set 2-pole Assembly, printed Each 6624 2 201-04 6.26
Test and Patch Cords Test Cord 2/4 6624 2 320-xx - 2-pole test cord - One side access with disconnection function - Not designed for LSA-PLUS/LSA Profil connection modules - Fitted with one LSA-PLUS plug and two 4mm banana sockets 6624 2 340-xx - 4-pole test cord - With disconnection function - Not designed for LSA-PLUS/LSA Profil connection modules - Fitted with one LSA-PLUS plug and four 4mm banana sockets. Test Cord 2/4, 2 x Banana Sockets Test Cord 2/4,4 x Banana Sockets Description Quantity Length Product No. Test Cord 2/4, 2 x Banana Sockets Each 2m 6624 2 320-02 Test Cord 2/4, 2 x Banana Sockets Each 0.2m 6624 2 320-09 Test Cord 2/4,4 x Banana Sockets Each 2m 6624 2 340-02 Test Cord 2/4,4 x Banana Sockets Each 6m 6624 2 340-06 Test Cord 2/4,4 x Banana Sockets Each 0.2m 6624 2 340-09 Plug Set 4-pole Assembly, printed - Plug kit for user assembly - With disconnection function - Not designed for LSA-PLUS/LSA Profil connection modules - Soldering contact Plug Set 4-pole Assembly Plug Set 4-pole Assembly, printed Each 6624 2 401-04 6.27
Test and Patch Cords Test Cord 2/4-2-pole test cord - One side access with disconnection function - Not designed for LSA-PLUS/LSA Profil connection modules - Fitted with one LSA-PLUS plug and two 4mm banana plugs Test Cord 2/4, 2 x Banana Plug Description Quantity Length Product No. Test Cord 2/4, 2 x Banana Plug Each 2m 6624 2 521-02 Test Cord 2/4, 2 x Banana Plug Each 6m 6624 2 521-06 Test Cord 2/4, 4 x Banana Plug Each 2m 6624 2 541-02 Test Cord 2/4, 4 x Banana Plug Each 6m 6624 2 541-06 Test Cord 2/4, Both End - 4-pole connection cord, with disconnection function - Not designed for LSA-PLUS/LSA Profil connection modules - Fitted with two LSA-PLUS plugs 2/4, wiring 1:1 HighBand to Series 2 Adaptor Plug, 1 or 2-pair Used to allow testing of HighBand circuits with the use of Series 2 Test Cords. Either 2 or 4-pole Series 2 Test Plugs may be used. Incoming and outgoing circuits are separated until a test plug is inserted. The type of Series 2 Plug inserted determines the mode of testing (i.e 2 or 4-pole plug). Test Cord 2/4, 4 x Banana Plug a a' a a' b b' b b' Test Cord 2/4, both end Description Quantity Length Product No. Test Cord 2/4, both end Each 2m 6624 2 801-02 Test Cord 2/4, both end Each 6m 6624 2 801-06 HighBand to Series 2 Adaptor Plug HighBand to Series 2 Adaptor Plug, 1 or 2-pair Bag of 1 White 6451 2 178-04 6.28
Test and Patch Cords Test Cord 1/2 (7040) For testing of LSA-PLUS modules, Series 1 (DIN modules). Test Cord 1/2 (7040) Test Cord 1/2 (7040) Each 6196 2 008-00 HighBand Test Cord with Banana Sockets For testing HighBand modules. Used when test equipment requires Banana Socket interfacing. Plug breaks the circuit. HighBand Test Cord, 1-pair to 2 Banana Sockets Description Quantity Length Colour Product No. HighBand Test Cord, 1-pair to 2 Banana Sockets Bag of 1 0.19m Black 6451 2 207-00 HighBand Test Cord, 2-pair to 4 Banana Sockets Bag of 1 0.19m Black 6451 2 213-00 6.29
Patch Panels Voice Grade Patch Panels These panels are designed for voice applications only. Available in both 25 and 50 ports, they slide out to allow termination from the front of the rack. Fits into 19" rack equipment. RJ45 sockets. Description 50-port Voice Patch Panel Quantity Product No. 25-port Voice Patch Panel Box of 1 7022 4 001-25 50-port Voice Patch Panel Box of 1 7022 4 001-50 Keystone Patch Panel, unloaded Will accommodate 16, 24 or 32 Keystone Inline outlets. All cage nuts and mounting screws are included. Rear cable minder is included. Fits into 19 rack equipment. Outlets not included. 24-port Patch Panel with Cable Minder Keystone 16-port Patch Panel with Cable Minder Box of 1 Black 7022 2 150-16 Keystone 24-port Patch Panel with Cable Minder Box of 1 Black 7022 2 150-24 Keystone 32-port Patch Panel with Cable Minder Box of 1 Black 7022 2 150-32 6.30
Outlets Keystone Surface Mount Box Used for surface mount applications where the wall cavity is not accessible. For use with a right angled Category 5e outlet or right angled Category 6 A outlet. For Category 6, use right angled Category 6 A outlet. Keystone Surface Mount Box, dual Keystone Surface Mount Box, single Bag of 1 Ivory 6467 1 101-00 Keystone Surface Mount Box, single Bag of 1 Grey 6467 1 101-10 Keystone Surface Mount Box, dual Bag of 1 Ivory 6467 1 102-00 Keystone Surface Mount Box, dual Bag of 1 Grey 6467 1 102-10 Shuttered Surface Mount Boxes These Surface Mount Boxes suit both the Category 6 KM8 outlet and the compact version of the Keystone Right Angle Outlets. The boxes come unloaded in 1-port, 2-port, 4-port and 6-port versions. Each port has its own spring loaded clear shutter. When not in use, the outlet is protected by the closed shutter. Clear shutter is ideal for outlet colour coding. Shuttered Surface Mount Box, 1-port Shuttered Surface Mount Box, 1-port Bag of 1 White 6467 1 132-01 Shuttered Surface Mount Box, 2-port Bag of 1 White 6467 1 132-02 Shuttered Surface Mount Box, 4-port Bag of 1 White 6467 1 132-04 Shuttered Surface Mount Box, 6-port Bag of 1 White 6467 1 132-06 6.31
Outlets Keystone RJ12 Outlet For mounting into Keystone Mount applications. Keystone surface mount boxes, Keystone faceplates etc. IDCs are at right angle to contacts. 6-position, 6-contact. Keystone RJ12 Outlet Keystone RJ12 Outlet Bag of 10 Grey 6467 5 195-00 Keystone RJ12 Outlet Bag of 10 Ivory 6467 5 195-10 Keystone RJ12 Outlet Bag of 10 White 6467 5 195-20 Keystone RJ12 Outlet Bag of 10 Black 6467 5 195-30 Keystone RJ12 Outlet Bag of 10 Blue 6467 5 195-40 Keystone RJ12 Outlet Bag of 10 Red 6467 5 195-50 Keystone RJ12 Outlet Bag of 10 Orange 6467 5 195-60 Keystone RJ12 Outlet Bag of 10 Purple 6467 5 195-70 Keystone RJ12 Outlet Bag of 10 Green 6467 5 195-80 Keystone RJ12 Outlet Bag of 10 Yellow 6467 5 195-90 6.32
Faceplates 12-port Dual Gang Faceplate For use with Keystone Outlets only. This Dual Gang Faceplate has 4 labelling areas and the 12 individual ports are numbered consecutively left to right, top to bottom. Package includes 4 blank paper labels, 4 clear plastic protectors, 2 ADC KRONE logo inserts and 4 mounting screws. 12-port Dual Gang Faceplate 12-port Dual Gang Faceplate Bag of 1 White 6644 1 157-01 12-port Mounting Block Compatible with 12-port Dual Gang Faceplate. Knockouts on the mounting block provide cabling access from all 4 sides and rear. 12-port Mounting Block 12-port Mounting Block Bag of 1 White 6644 3 000-28 6.33
Faceplates 50x50 European Style Faceplates The Euro style faceplate will accept up to two 25x50 adaptors. Dimensions: Single-gang faceplate: 80 x 80 x 10.5mm European Style Faceplates Unloaded Faceplate, 50x50 Euro Style, Single-Gang Each White 6540 1 808-00 Wall-Mountable Back Box Box of 1 White 0637 0 006-57 UK Style Standard Faceplates UK Style, single and double-gang faceplates for use with angled 25x50 adaptors. Dimensions: 50x50 Single-Gang faceplate: 80 x 80 x 9.35mm 50 x 100 Double-Gang Faceplate: 145 x 70 x 9.35mm UK Style Standard Faceplates Single-Gang Unloaded Faceplate, UK Style, 50x50 Each White 6540 1 806-00 Double-Gang Unloaded Faceplate, UK Style, 50x100 Each White 6540 1 807-00 6.34
Faceplates UK Style Deep Faceplates UK style, single and double-gang deep faceplates for use with 25x50 adaptors and CL keystone jacks. The deeper faceplate has the added benefit of 6mm added depth against standard UK style product and is therefore ideal for use with Category 6 and CopperTen in shallow back boxes. Dimensions: 50x50 Single-Gang faceplate: Overall dimensions 80 x 80 x 15.35mm 50 x 100 Double-Gang Faceplate: Overall dimensions 145 x 80 x 15.35mm UK Style Deep Faceplates Single-Gang Unloaded Deep Faceplate, UK Style, 50x50 Each White 6540 1 812-04 Double-Gang Unloaded Deep Faceplate, UK Style, 50x100 Each White 6540 1 812-05 Keystone UK Style Faceplates UK Style faceplate with integrated dust protection for accommodating Category 5e & Category 6 outlets. Dimensions: 85 x 85mm Keystone UK Style Faceplates Single-Gang Unloaded Faceplate, Keystone UK Style Bag of 1 White 6538 3 111-03 Double-Gang Unloaded Faceplate, Keystone UK Style Bag of 1 White 6538 3 111-04 4 Port Unloaded Faceplate, Keystone UK Style Bag of 1 White 6467 2 103-00 6.35
Faceplates Angled UK Style Faceplates Angled UK style faceplate with integrated dust protection. Single-Gang Angled UK Style Faceplate, With Shutter Bag of 1 White 6467 2 099-01 Double-Gang Angled UK Style Faceplate, with Shutter Bag of 1 White 6467 2 100-01 US Style Faceplates US Style Faceplate with a single-gang capacity up to six ports, for accomodating Category 5e & Category 6 outlets. Dimensions: 115 x 70mm Angled UK Style Faceplates Double-Gang Angled US Style Faceplate, without Shutter Bag of 1 White 6644 1 152-01 4 Port Faceplate, US Style, Without Shutter Bag of 1 White 6644 1 154-01 6 Port Faceplate, US Style, Without Shutter Bag of 1 White 6644 1 156-01 Blank Modular Insert for US Style Faceplate Bag of 25 White 6645 1 160-01 US Style Horizontal Faceplates US Style Horizontal Faceplate for standard NEMA openings in modular furniture raceways or standard single-gang boxes. Dimensions: 69.85mm x 114.3mm x 6.35mm Double-Gang Faceplate 6 Port Faceplate Double-Gang Horizontal Faceplates Double-Gang Horizontal Faceplate, US Style, without Shutter Bag of 1 White 6644 1 112-01 Double-Gang Horizontal Faceplate, US Style, without Shutter Bag of 1 Ivory 6644 1 112-02 Single-Gang Horizontal Faceplate, US Style, with Shutter Bag of 1 White 6644 1 112-03 Double-Gang Horizontal Faceplate, US Style, with Shutter Bag of 1 White 6644 1 112-04 6.36
Adaptors PDL Adaptor Kit Fits into the PDL600 and PDL500 range of faceplates. Accommodates the Keystone range of outlets. PDL600 Adaptor Kit PDL600 Adaptor Kit Bag of 10 White 6467 1 122-00 PDL600 Adaptor Kit Bag of 10 Black 6467 1 122-10 25x50 Adaptors Angled Adapter for use with UK Style Faceplates. Angled Adaptor Blank Insert Keystone Angled 25x50 Adaptor Bag of 1 White 6538 4 111-05 25x50 Blank Insert Each White 6540 1 801-01 6.37
Cable Voice Cable - Underground Jelly filled, Screened Cable consists of up to 100 pairs of 0.64mm diameter plain annealed copper conductors, cellular polyethylene insulated, twinned, bound into 10 pair units, units laid up, jelly filled interstices, taped, moisture barriered, polyethylene overall sheathed, integrally bonded nylon jacketed and polyethylene sacrificial sheathed. Used for external underground voice applications. Specifications CONSTRUCTION CHARACTERISTICS Conductor: Insulation: Water Blocking: Wrapping: Moisture Barrier: Sheath: Jacket: Sacrificial Sheath: Plain annealed copper 0.64mm Cellular polyethylene Petroleum jelly (interstices) Polyethylene terephthalate or paper tape Aluminium/polyethylene laminated tape Polyethylene Nylon Polyethylene (UV resistant) - Black MECHANICAL/Physical CHARACTERISTICS Pair Count 10 30 50 100 Diameter (nominal) [mm] 13.0 18.7 22.6 30.2 Operating temperature range [º C] -10 to +70 ELECTRICAL CHARACTERISTICS Maximum conductor resistance [Ω/km] 56.4 Minimum insulation resistance [MΩkm] 20000 Mutual capacitance maximum average [nf/km] 49 Max. capacitance unbalance 150 (corrected to 500m length) pair to pair [pf] Plain Annealed Copper Pairs Polyethylene Insulation Jelly Filled Interstices Wrapping Tapes Coloured Binders Aluminium/Polyetheliene Moisture Barrier Polyetheliene Inner Sheath Nylon Sheath (bonded to inner PE) Polyetheliene Sacrificial Sheath Description Length Product No. External Underground Voice Cable 10-pair 500m Reel 6462 1 200-01 External Underground Voice Cable 30-pair 500m Reel 6462 1 200-02 External Underground Voice Cable 50-pair 500m Reel 6462 1 200-03 External Underground Voice Cable 100-pair 500m Reel 6462 1 200-04 6.38