New from Beissbarth: wheel-balancing with the electronic easyfix data recording arm. All the best for your automobile service.
Technology and user convenience guarantee high performance in your workshop. Three model variants, all with pivoting colour monitor and integrated foil keyboard. This combination of technical features gives our customers a decisive advantage: outstanding operating reliability. With the display on the colour monitor and the control panel with foil keyboard beneath in the same field of vision. There is another positive side-effect: the tray on the machine housing remains free for its intended purpose: to hold weights of all kinds, weight pliers and centring cones. A standard feature: eleven different languages available at the touch of a button. Simplifying the work process: the pedaloperated machineshaft brake. Electronic sensor arms for automatic rim data detection. They speed up your entire work procedure immensely: rim data are recorded electronically when the test arms are moved into position. Measuring runs on the microtec 865 take place automatically, from closing the safety hood through to wheel braking. Imbalance data are recorded, memorised and simultaneously displayed as readings on the colour monitor. A pedal-operated machine shaft brake makes imbalance compensation, flange changes or wheel attachment even easier. All models sold in Germany have a centre-hole centring flange as standard. The Beissbarth centre-hole centring flange can handle approx. 90 % of all passenger-car wheels. We also supply a full range of clamping flanges for wheels without holes, special-size wheels or motorcycle wheels. Contact us and we will advise you on what is needed. Model 865.ADP is supplied ex factory with a pedal-operated pneumatic flange. This makes operation easier and improves centring quality when clamping the wheel into position.
Making the work easier: eleven balancing methods with the easyfix data recording arm. The optimum wheel-balancing method for each rim type. With the microtec 865 you are ready to handle all rim types and attach weights efficiently. You have a choice of nine balancing programs for passenger-car wheels, including programs for alloy wheels. There are three programs for concealed attachment of the external adhesive weight on the inside of the rim and three special programs for concealed attachment of split adhesive weights behind the spokes. In addition, there are two programs for motorcycle wheels. With this variety of programs, you can be sure that concealed attachment of the weights will be possible. Electronic easyfix data recording arm for precise weight attachment with the mt 865.AD and mt 865.ADP. The electronic easyfix data recording arm makes precise attachment of concealed adhesive weights so easy. When you move the arm up to the desired rim position for imbalance compensation, the easyfix data recording arm saves data for both positions to the system (either via the pedal or a timer loop) and confirms both values with an acoustic signal. After the measuring run you turn the wheel to the compensation position, then move the easyfix data recording arm with the adhesive weight inserted to the desired position as previously memorised. With operator control, of course, via the colour monitor and with electromagnetic locking of the easyfix data recording arm when the relevant imbalance compensation levels are reached. Attach the weights it s easy as that. Simple and precise. With another convenience bonus: you can use the pedal operated machine shaft brake when attaching the adhesive weight. Ready to handle all rim types: nine standard balancing programs for passenger-car wheels. Two balancing programs for motorcycle wheels as a standard feature. Electronic easyfix data recording arm for precise attachment of concealed adhesive weights.
The monitor shows you what to do. At every stage in the work. Easy-tounderstand graphics speed up the work process without using many words. This also applies to wheel balancing with concealed adhesive weights. Display of concealed attachment of split adhesive weights behind the spokes. For concealed attachment of split adhesive weights you simply enter the number of spokes on the keyboard. A standard service: You can enter an advertising text or a user name via the keyboard on the display. Operator guidance on the colour monitor right through to the matching program. The microtec 865 s new graphic user surface has no lengthy texts that need to be studied before you make the next move. Symbols, arrows and colour markings supply clear information about what to do. The operator can balance the wheels accurately in a rapid process run. Even severe imbalance can be easily reduced or optimised with the standard matching program, so that the tire can be turned on the rim. With operator control on the colour monitor, of course. Your advantage: the customers wheels are not disfigured by giant weights. Operator guidance during the matching program.
Model versions. Accessories, technical data. Accessories: Here is a selection of accessories to make your wheel-balancing service perfect. Universal flange with continuously adjustable swivel pins for all rims with and without holes and for 3-, 4- or 5-hole rims (931 141 071). Model versions: Equipment 865.A 865.AD 865.ADP Aluminium mechanical alignment gauge easyfix data recording arm Pneumatically-operated rapid clamping standard, not available Technical data: For wheels up to 70 kg (max.) Rim diameter: 10 26 Rim width up to 20 Max. outside diameter of wheel: 900 mm 1 x 230 V, 50 Hz power supply (other supply voltages available on request) Balancing speed: 190 1/min Measuring time: 3 seconds Dimensions (width x height x depth): 900 x 1800 x 1250 mm Weight 186 /187 /193 kg Paint finish: blue (RAL 5015), grey (RAL 7021) Technical data and equipment specifications subject to amendment. Motorcycle flange for all standard wheels (931 141 053). Centring disk for passenger-car and light commercial vehicle wheels, for precise clamping of heavy wheels with a hole pitch circle of 5x100/108/112/ 114.3/120/127 mm (931 141 017). Spacer ring (40 mm with sleeve) for attaching extremely wide rims with large dish depth (931 143 062). Light truck centring cone (Ø 122 170 mm) with spacer disk, needed for wheels with an extremely large centre hole (931 144 001). Start to use this new wheel-balancing technology. Now! The new microtec 865, which is available in three model versions, gives your wheel-balancing service new top performance: automatic measuring run with wheel braking raised, swivel-mounted 17 -colour monitor with integrated foil keyboard on the monitor housing electronic sensor arms for automatic rim data detection (distance, width, diameter) easy and precise positioning and attachment of concealed adhesive weights: on mt 865.A with aluminium mechanical alignment gauge on mt 865.AD and 865.ADP with electronic easyfix data recording arm nine balancing programs for passenger-car wheels and two for motorcycle wheels standard centre-hole centring flange as option on the mt 865.A/.AD with mechanical quick-clamping nut on the mt 865.ADP with pneumatically operated quickclamping nut, pedal-operated pedal-operated machine shaft brake for wheel clamping or imbalance compensation context-related help texts for special functions can be displayed on the colour monitor matching program.
Beissbarth s worldwide presence gives you after-sales security. Service and supply of spare parts: reliable, nation-wide, worldwide. In Germany, initial product familiarisation, assembly and servicing are carried out by our own national service centres and certified partner workshops. This guarantees our customers rapid on-site availability for servicing and maintenance. Software updates for PC-aided equipment are available on disk or CD ROM and also on the Internet, so that your service equipment can be updated more rapidly. A mouse click puts you in direct contact with the Beissbarth Software Centre at www.beissbarth.com. You can then download the required software against a fee or print out the latest vehicle target data free of charge. A perfect service: rapid, uncomplicated, available 24 hours a day. Your specialist dealer: Beissbarth Australia Thomastown Victoria 3074 Tel. 0061-3-94642533 Beissbarth Bulgaria Sofia 1582 Tel. 00359-2-9732375 Beissbarth China Beijing 100101 Tel. 0086-10-649264-83/-84/-31 FFB France 58440 Myennes Tel. 0033-3-86395050 Beissbarth Italy 41043 Formigine (MO) Tel. 0039-059-570990 Beissbarth South Africa Boksburg Tel. 0027-11-3978800 Beissbarth UK Nottingham NG 11 7 EP Tel. 0044-115-9815151 Beissbarth Ukraine 01054 Kiew Tel. 0038-044-2512128 Beissbarth GmbH Hanauer Straße 101 D 80993 München Phone + 49-89 - 1 49 01-0 Fax + 49-89 - 1 49 01-285 / - 240 www.beissbarth.com Email: sales@beissbarth.com All the best for your automobile service.