Material Safety Data Sheet

Similar documents
Material Safety Data Sheet 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet White Marble TCC Materials Version 1.0

Safety Data Sheet TCC Utility Sand TCC Materials Version 1.0

Version /30/2006

Safety Data Sheet Weed-Blocker Paver Locking Sand TCC Materials Version 1.1

Safety Data Sheet Paver Base TCC Materials Version 1.0

SAFETY DATA SHEET SEA MUD

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

Material Safety Data Sheet

Material Safety Data Sheet

SAFETY DATA SHEET Earth Juice Elements Grow. 1. Product And Company Identification

MATERIAL SAFETY DATA SHEET IMt-2 November 3, 2005

SAFETY DATA SHEET. Other Names: Bentonite Clay; Wyoming Sodium Bentonite; Sodium Montmorillonite

KAY INDOOR/OUTDOOR ABSORBENT. Use only for the purpose on the product label.

PRODUCT NAME : PLASTER OF PARIS UPC NUMBER : , , , PRODUCT USE/CLASS : Plaster of Paris

Gelatin Type B, Powder, NF

Safety Data Sheet Pre-Mixed Concrete & Stucco Patch Akona Manufacturing LLC. Version 2.2

Diatomaceous Earth Safety Data Sheet

1. Chemical Product and Company Identification

SAFETY DATA SHEET Earth Juice Natural Up. 1. Product And Company Identification

Safety Data Sheet SAKRETE Concrete Crack Filler Roberts Concrete Products (a TCC Materials company) Version 1.0

Version /28/2006

SAFETY DATA SHEET. Date of Preparation: 06/17/2014 SDS #: MSDS

Product Identifier Boric Acid Version: 6 Effective Date: 8 February, 2016 Other Means Of None Identification Initial Supplier Identifier

SAFETY DATA SHEET. 1. Product And Company Identification. 2. Hazards Identification

Material Safety Data Sheet Calcium carbonate, ACS. Section 1 - Chemical Product and Company Identification

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION. Product Identity: Crude Glycerin Chemical Name: 1,2,3-propanetriol

SAFETY DATA SHEET. Date of Preparation: 06/05/2014 SDS #: MSDS

Version /30/2006

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

Product Identifier Floater Version: 6 Effective Date: July 11, Tel: Floor drain treatment for odour control. No restrictions.

SAFETY DATA SHEET. Section 1 Identification. Section 2. Hazard Identification. Section 3. Composition / Information On Ingredients

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Version /28/2006

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Material Safety Data Sheet Sodium Ammonium Phosphate Solutions. Section 1 - Chemical Product and Company Identification

SDS Oil-Dri Sweeping Compound Date Prepared: 2/5/2015

WT-9011 SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/2015

Safety Data Sheet. Aluminum Hydroxide. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Material Safety Data Sheet Potassium Cocoate (PCOCOATE) April 22, 2015

MATERIAL SAFETY DATA SHEET

Other Names: Gel; IGB (all); IGBA; Gel Noodles; Imvite 1016; Saponite (all) Recommended Uses: Suspension agent; gelling agent; filtering

Material Safety Data Sheet Sulfamic acid, ACS. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

Potassium Acetate, Crystal, ACS

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

Product Identifier Liquid Fire Version: 6 Effective Date: 10 July, 2017 Other Means Of None Identification Initial Supplier Identifier

Version /22/2006

Material Safety Data Sheet Phenylarsine oxide. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Potassium phosphate dibasic. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Gold Chloride, trihydrate. Section 1 - Chemical Product and Company Identification

Version /29/2006

Product Identifier Blitz Version: 6 Effective Date: 10 July, 2017 Other Means Of None Identification Initial Supplier Identifier

Material Safety Data Sheet m-cresol Purple, 0.1% Aqueous. Section 1 - Chemical Product and Company Identification

SECTION 1: PRODUCT / SUPPLIER IDENTIFICATION

3. COMPOSITION / INFORMATION ON INGREDIENTS

Recommended use of the chemical and restrictions on use: Road stabilization and dust control.

SAFETY DATA SHEET 16 Sections

Material Safety Data Sheet Sodium Borate, Decahydrate. Section 1 - Chemical Product and Company Identification

SIMCALA, INC. Material Safety Data Sheet SIMCALA, INC. SM SILICA FUME

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Sodium Pyrophosphate, Decahydrate, Crystal, ACS

Material Safety Data Sheet

1. Product And Company Identification

KEYSTONE WATER BASED STAINLESS STEEL POLISH. Use only for the purpose on the product label.

Material Safety Data Sheet

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

Version /20/2006

Carolina Narrow Fabric Company

Weight percent. CAS No.

Material Safety Data Sheet Calcium chloride, ACS. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Product Identifier Propylene Glycol 40% Version: 3 Effective Date: 19 February, Not a regulated product None None Non Hazardous.

SECTION 16 OTHER INFORMATION

SAFETY DATA SHEET Kemresin. Section 1 - Product and Company Identification. Section 2 - Hazards Identification

Material Safety Data Sheet Brij 35, 30% w/v. Section 1 - Chemical Product and Company Identification

Use only for the purpose on the product label.

Product Identifier Vyna Tone Version: 7 Effective Date: September 17, 2017 Other Means Of None Identification Initial Supplier Identifier

EARTH OPTIONS BY RAID HOUSE & GARDEN INSECT KILLER

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

NO THAW FREEZER/COOLER CLEANER. Use only for the purpose on the product label.

Lectroetch Immersion Cleaner (LIC)

Safety Data Sheet. Zeochem Silica. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Magnesium Chloride, Hexahydrate, Crystal, USP

1. IDENTIFICATION. For Transportation Emergencies, call Chemtrec: HAZARDS IDENTIFICATION

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

Buffer, ph 4.00 with Color Code Red

NewLook International, Inc. Mean Klean Concrete Dissolver. Safety Data Sheet. Section 1 Product and Company Identification:

Version /08/2003

CATILAC Culture Media

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Material Safety Data Sheet Methyl violet. Section 1 - Chemical Product and Company Identification

FANTASTIK ORIGINAL DISINFECTANT ALL PURPOSE CLEANER

Transcription:

Material Safety Data Sheet 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Id: Product Name: Synonyms: Aquacel, (Celite=C) C 269, C 281, C 499, C 501, C 503 (all), C 513, C 522, C535, C 545, C 552, C 560, C 566, C 578P, C 580, C HSC, Hyflo (all), Hyflo Super Cel (all), X-4, X-5, X-6, X-7 Chemical Family: Silica Application: Filter Aid, Fillers. Distributed By: Univar Canada Ltd. 9800 Van Horne Way Richmond, BC V6X 1W5 Prepared By: The Environment, Health and Safety Department of Univar Canada Ltd. Preparation date of MSDS: 24/Jan/2013 Telephone number of preparer: 1-866-686-4827 24-Hour Emergency Telephone Number (CANUTEC): (613) 996-6666 2. COMPOSITION/INFORMATION ON INGREDIENTS 68855-54-9 Percentage LD50s and LC50s Route & Species: (W/W) 100 Not available. Note: This product may contain up to 75% Crystalline Silica: Cristobalite 14464-46-1 <50, Quartz 14808-60-7 <4. 3. HAZARDS IDENTIFICATION Potential Acute Health Effects: Eye Contact: May cause slight transient (temporary) eye irritation. Skin Contact: May cause mechanical irritation. Inhalation: May cause irritation of the respiratory tract. Irritation and soreness in throat and nose. In extreme exposures some congestion may occur. Ingestion: Not expected to be a hazard in normal industrial use. Page 1 of 5

4. FIRST AID MEASURES Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. Skin Contact: Wash with soap and water. Inhalation: Remove person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, get immediate medical attention. Ingestion: Do not induce vomiting. If signs of irritation or toxicity occur seek medical attention. Notes to Physician: Treatment based on sound judgment of physician and individual reactions of patient. 5. FIRE FIGHTING MEASURES Flash Point: None. Flash Point Method: Not applicable. Autoignition Temperature: Not available. Flammable Limits in Air (%): Not Available. Extinguishing Media: Use DRY chemicals, CO2, alcohol foam or water spray. Special Exposure Hazards: None expected. Hazardous Decomposition/Combustion Materials (under fire conditions): Not available. Special Protective Equipment: Fire fighters should wear full protective clothing, including self-contained breathing equipment. NFPA RATINGS FOR THIS PRODUCT ARE: Not Available. HMIS RATINGS FOR THIS PRODUCT ARE: Not Available. 6. ACCIDENTAL RELEASE MEASURES Personal Precautionary Measures: Wear appropriate protective equipment. Environmental Precautionary Measures: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. Consult local authorities. Procedure for Clean Up: Use vacuum suction with HEPA filters to clean up spilled material. Use wet sweeping or dust suppressant where sweeping is necessary. 7. HANDLING AND STORAGE Handling: For food plant and other industrial use only. Avoid dust generation. Avoid breathing in dust. Avoid contact with eyes, skin and clothing. Empty containers may contain hazardous product residues. Storage: Store in a cool, dry, well ventilated area, away from heat and ignition sources. Place away from incompatible materials. Store in accordance with good industrial practices. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Localized ventilation should be used to control dust levels. Respiratory Protection: <10X PEL, Use a N95 quarter or half mask respirator; <50X PEL, Use a full face respirator equipped with N95 filter; <200X PEL, Use a powdered air purifying respirator (positive pressure) with N95 filters; >200X PEL, use a full face, type C supplied air respirator (continuous flow mode) Gloves: Not normally required. Skin Protection: Normal work coveralls. Eyes: Safety glasses with side shields or chemical goggles. Other Personal Protection Data: Ensure that eyewash stations and safety showers are proximal to the work-station location. Exposure Limit - ACGIH Exposure Limit - OSHA Immediately Dangerous to Life or Health - IDLH TIME-WEIGHTED AVERAGE (TLV-TWA) : 0.05 mg/m 3 (silica, crystalline - cristobalite, respirable particulate) TIME-WEIGHTED AVERAGE (PEL-TWA) : 0.05 mg/m 3 (silica, crystalline cristobalite (as quartz), respirable dust) The IDLH concentration for silica, cristobalite is 25 mg/m 3. Page 2 of 5

Physical State: Powder. Color: White Odor: Odorless ph 9-10.5 Specific Gravity: 2.3 Boiling Point: Not Available. Freezing/Melting Point: Not Available. Vapor Pressure: Not Available. Vapor Density: Not Available. % Volatile by Volume: 0% Evaporation Rate: Not Available. Solubility: Negligible in water. VOCs: Not Available. Viscosity: Not Available. Molecular Weight: Not Available. Other: Not Available. Chemical Stability: Stable. Hazardous Polymerization: Will not occur. Conditions to Avoid: None known. Materials to Avoid: Hydrofluoric acid. Hazardous Decomposition Products: Not available. Additional Information: No additional remark. 9. PHYSICAL AND CHEMICAL PROPERTIES 10. STABILITY AND REACTIVITY 11. TOXICOLOGICAL INFORMATION Principle Routes of Exposure Ingestion: Not expected to be a hazard in normal industrial use. Skin Contact: May cause mechanical irritation. Inhalation: May cause irritation of the respiratory tract. Irritation and soreness in throat and nose. In extreme exposures some congestion may occur. Eye Contact: May cause slight transient (temporary) eye irritation. Additional Information: Respirable crystalline silica can cause silicosis, a fibrosis (scarring) of the lungs. Silicosis may be progressive; it may lead to disability and death. There is evidence that the disease silicosis is associated with the increased incidence of scleroderma, an autoimmune disorder manifested by a fibrosis (scarring) of the skin and internal organs. Silicosis increases the risk of tuberculosis. There are several studies suggesting that exposure to respirable crystalline silica or that the disease silicosis is associated with the increased incidence of kidney disorder. Acute Test of Product: Acute Oral LD50: Not Available. Acute Dermal LD50: Not Available. Acute Inhalation LC50: Not Available. Carcinogenicity: IARC - Carcinogens ACGIH - Carcinogens Group 3 Not listed. Carcinogenicity Comment: Crystalline silica is also a known cause of silicosis, a noncancerous lung disease caused by excessive exposure to crystalline silica. Reproductive Toxicity/ Teratogenicity/ Embryotoxicity/ Mutagenicity: Not Available. Page 3 of 5

Ecotoxicological Information: 12. ECOLOGICAL INFORMATION Ecotoxicity - Fish Species Acute Crustaceans Ecotoxicity - Freshwater Data Toxicity: Algae Data Not Available. Not Available. Not Available. Other Information: No additional remark. 13. DISPOSAL CONSIDERATIONS Disposal of Waste Method: Disposal of all wastes must be done in accordance with municipal, provincial and federal regulations. Contaminated Packaging: Empty containers should be recycled or disposed of through an approved waste management facility. DOT (U.S.): DOT Shipping Name: Not Regulated. DOT Hazardous Class Not Applicable. DOT UN Number: Not Applicable. DOT Packing Group: Not Applicable. DOT Reportable Quantity (lbs): Not Available. Note: No additional remark. Marine Pollutant: No. TDG (Canada): TDG Shipping Name: Not Regulated. Hazard Class: Not Applicable. UN Number: Not Applicable. Packing Group: Not Applicable. Note: No additional remark. Marine Pollutant: No. 14. TRANSPORT INFORMATION Page 4 of 5

15. REGULATORY INFORMATION U.S. TSCA Inventory Status: All components of this product are either on the Toxic Substances Control Act (TSCA) Inventory List or exempt. Canadian DSL Inventory Status: All components of this product are either on the Domestic Substances List (DSL), the Non-Domestic Substances List (NDSL) or exempt. Note: Not available. U.S. Regulatory Rules CERCLA/SARA - Section SARA (311, 312) Hazard CERCLA/SARA - Section 302: Class: 313: Not Listed. Not Listed. Not Listed. California Proposition 65: Not Listed. MA Right to Know List: Not Listed. New Jersey Right-to-Know List: Not Listed. Pennsylvania Right to Know List: Listed. WHMIS Hazardous Class: D2A VERY TOXIC MATERIALS Additional Information: Disclaimer: 16. OTHER INFORMATION This product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR. NOTICE TO READER: Univar, expressly disclaims all express or implied warranties of merchantability and fitness for a particular purpose, with respect to the product or information provided herein, and shall under no circumstances be liable for incidental or consequential damages. Do not use ingredient information and/or ingredient percentages in this MSDS as a product specification. For product specification information refer to a Product Specification Sheet and/or a Certificate of Analysis. These can be obtained from your local Univar Sales Office. All information appearing herein is based upon data obtained from the manufacturer and/or recognized technical sources. While the information is believed to be accurate, Univar makes no representations as to its accuracy or sufficiency. Conditions of use are beyond Univar's control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risks of their use, handling, and disposal of the product, or from the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process. ***END OF MSDS*** Page 5 of 5