VISUL LEVEL The visual level gauges allow the liquid level to be checked in a clear and precise way at any time, in addition to the possibility of having electric signals. 8
TL VISUL LEVEL / DISTNE 76-27-254 MM The visual level gauges TL series allow the liquid level to be checked in a clear and precise way at any time. PRINIPLE OF OPERTION: The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. OPTIONS: - / distance 76, 27, 254 mm interchangeable with almost every level visual marketing - ody Transparent polyamide based TR 55 LX (Grilamid TM ) or polycarbonate. TEHNIL DVNTGES: - onstant and continuous indication of the level of the liquid - Minimum thickness 4 mm: this means that the level does not need protection - Total visibility, both front and side - The special welding allows a perfect fusion, creating a block with high mechanical properties. HEMIL RESISTNE: The polymer used is a compound based on polyamide 2. F.lli Giacomello s.n.c. 9
TL RER T ONTRST ON WHITE KGROUND 76-27 - 254 08-59 - 286 Ø52 H. 6 IMETLLI THERMOMETER TS DOULE SL (0-20) ND F (30-250) 27 32 26 MOD. / DISTNE SREWS MTERIL (mm) RED FLOT OVER ODY MTERIL TEMP. ( ) OR MTERIL TEMP. ( ) THERMOMETER DEVIES LOKNUT 76 GLVNISED STEEL M0 44 NR -30Ö+00 0 WITHOUT S WITHOUT GLVNISED STEEL M2 44 YES YES TR 55-70...+8 0 2 FKM (VITON) -25Ö+200 TL 27 25 4 D NIKEL PLTED RSS M0 NIKEL PLTED RSS M2 44 44 E ISI 36 S/STEEL M0 44 F ISI 36 S/STEEL M2 44 2 NO NO POLYRONT E -50Ö+30 3 SI (SILIONE) -60Ö+200 4 HNR -40Ö+30 5 EPDM -45Ö+55 6 7 FEP (FKM-SILIONE) MFQ (FLUOROSILIONE) -60Ö+205-65Ö+75 R R2 WITH LOWER IMETLLI THERMOMETER (WITH RSS NIKEL SREW M2) WITH LOWER IMETLLI THERMOMETER (ONLY WITH INOX SREW M2) 2 WITH TWO M0 GLVNIZED LOKNUT WITH TWO M2 GLVNIZED LOKNUT TL 27 R S 0 F.lli Giacomello s.n.c.
TL/E LEVEL ELETRIL HRTERISTIS The visual level gauges TL series allow the liquid level to be checked in a clear and precise way at any time. PRINIPLE OF OPERTION: The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. OPTIONS: - / distance 76, 27, 254 mm interchangeable with almost every level visual marketing - ody Transparent polyamide based TR 55 LX (Grilamid TM ) or polycarbonate. HEMIL RESISTNE: The polymer used is a compound based on polyamide 2. The Top Level electric visual level gauge offers visual signalling as well as a minimum level electric signal which can be N.O. or N.. or EXHNGE. The many advantages include: - just one purchase - just one installation - savings in costs and work - total safety: the electrical part is completely separate from the liquid and insulated with respect to the outside. F.lli Giacomello s.n.c.
TL/T-TL/P HRTERISTIS OF LEVEL GUGE WITH THERMOSTT / PT 00 TL/TE-TL/PE HRTERISTIS OF ELETRI LEVEL GUGE WITH THERMOSTT / PT 00 In addition to the electric level gauge, the Top Level can provide temperature signalling by means of a PT 00 (-50 +50 ) or the insertion of a preset thermostat. To facilitate the passage of heat, from the tank through the hollow screw to the thermostat / PT 00, a metal plate is inserted inside the level gauge to conduct the heat of the liquid faster and with less dissipation. In addition to the already mentioned qualities of the TOP LEVEL, there is also the possibility of having a minimum electric signal together with the temperature signal of a thermostat or a PT 00, all in a single level gauge, and on a single connector. In conjunction with the thermostat / PT 00, a cap is fitted standard on the bottom screw to prevent heat loss to the outside. omplete resin coating in the cavity containing the thermostat provides better heat and electrical insulation safety. METL PLTE FOR TRNSMISSION OF HET THERMOSTT / PT 00 RESIN ONNETOR IP 65 PG7 INDUSTRIL STNDRD FLOT ELETRIL ONTT P THERMOSTT / PT 00 HOLLOW SREW HOLLOW SREW THERMOSTT ELETRIL HRTERISTIS VOLTGE 250 V. OMMUTLE FREQUENY 50 Hz LOD VLUES MX. LOD OMMUTTING TEMPERTURE ONTTS TOLERNE 50-60 - 70-80 N.H. = NORMLLY LOSED N.. = NORMLLY OPEN ± 5 2 F.lli Giacomello s.n.c.
TL/E-TL/T-TL/P-TL/TE-TL/PE SHEME OF ORDER H. 6 Ø52 76-27 - 254 08-59 - 286 IMETLLI THERMOMETER TS DOULE SLE (0-20) ND F (30-250) 27 32 38 68 26 Maximum pressure: see page 33 Maximum tightening torque: 0 Nm F.lli Giacomello s.n.c. 3
LV MULTIONTROL RNGE VISUL LEVEL GUGES 28 M0 OR M2 SREWS REESSED IN THE ODY 3 HED SLE STMPED ON LUMINIUM FOR PERFET ONTRST WITH LIQUID L U PROTETION SREEN WITH GRDUTED SLE 3 29 / DISTNE 35 The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with taps that stop the flow of liquid from the tank to the gauge and with PT00 for continuous monitoring of temperature through PL. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. 4 F.lli Giacomello s.n.c.
42 VISILE TUE IN LTERL POSITION WITH LOW PROFILE L = 5mm MX MIN SERIGRPHY ON REQUEST ON USTOMUR DRWING TP Maximum pressure: see page 33 Maximum tightening torque: 0 Nm F.lli Giacomello s.n.c. 5
LV-T VISUL LEVEL GUGES WITH INTERNL THERMOMETER 28 M0 OR M2 SREWS REESSED IN THE ODY 3 HED L U PROTETION SREEN WITH GRDUTED SLE / DISTNE SLE STMPED ON LUMINIUM FOR PERFET ONTRST WITH LIQUID 3 29 35 The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The LV/T has a thermometer in the tube located at the bottom of the head. This ensures a continuous display of the temperature inside the tank. The level gauges can be equipped with taps that stop the flow of liquid from the tank to the gauge. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. 6 F.lli Giacomello s.n.c.
42 VISILE TUE IN LTERL POSITION WITH LOW PROFILE L 5mm MX MIN SERIGRPHY ON REQUEST ON USTOMER DRWING TP Maximum pressure: see page 33 Maximum tightening torque: 0 Nm F.lli Giacomello s.n.c. 7
LV/Ts VISUL LEVEL GUGES WITH EXTHERNL IMETLLI THERMOMETER 28 M2 SREWS REESSED IN THE TUE HED SLE STMPED ON LLUMINIUM FOR PERFET ONTRST WITH LIQUID U PROTETION SREEN WITH GRDUTED SLE L 30 0 60 90 20 The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The LV/Ts has an exthernal bimetallic thermometer in the bottom screw. This ensures a continuous display of the temperature inside the tank. The level gauges can be equipped with PT00 for continuous monitoring of temperature through PL. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. 8 F.lli Giacomello s.n.c.
SERIGRPHY ON REQUEST ON USTOMER DRWIN VISILE TUE IN LTERL POSITION WITH LOW PROFILE L 5mm 3 29 42 / DISTNE 3 MX MIN L Ø55 M2 35 27 50 58 Maximum pressure: see page 33 Maximum tightening torque: 0 Nm F.lli Giacomello s.n.c. 9
LV/E VISUL LEVEL GUGES WITH MINIMUM LEVEL SIGNL The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with tap that stop the flow of liquid from the tank to the gauge. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. s well as providing a visual indication, the visual level gauge E have a minimum level signal which can be N.O. or N.. or EXHNGE. 28 M0 OR M2 SREWS REESSED IN THE ODY 3 HED SLE STMPED ON LUMINIUM FOR PERFET ONTRST WITH LIQUID L U PROTETION SREEN WITH GRDUTED SLE 29 / DISTNE FLOT WITH MGNET 3 ONNETOR INDUSTRIL STNDRD IP. 65/PG7 35 20 F.lli Giacomello s.n.c.
42 Ø52 7 MX VISILE TUE IN LTERL POSITION WITH LOW PROFILE L = 5mm IMETL THERMOMETER TS WITH DOULE SLE (0-20) ND F (30-250) 27 50 58 M2 MIN SERIGRPHY ON REQUEST ON USTOMUR DRWING Maximum pressure: see page 33 Maximum tightening torque: 0 Nm TP 2 2 2 3 F.lli Giacomello s.n.c. 2
LV/E2 VISUL LEVEL GUGES WITH MINIMUN ND MXIMUN SIGNL The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with tap that stop the flow of liquid from the tank to the gauge. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. s well as providing a visual indication, the visual level gauge E2 have a minimum and maximum level signal which can be N.O. or N.. or EXHNGE. SPER 28 L M0 OR M2 SREWS REESSED IN THE ODY U PROTETION SREEN WITH GRDUTED SLE 3 / DISTNE 3 30 SWITHING THRESHOLD MIN. ND MX. LEVEL 40 29 35 65 HED E2 - MX. LEVEL ONTT SLE STMPED ON THE LUMINIUM FOR PERFET ONTRST WITH LIQUID FLOT WITH TWO MGNETS ONNETOR INDUSTRIL STNDRD IP. 65/PG7 E - MIN. LEVEL ONTT 22 F.lli Giacomello s.n.c.
TUO VISIILE IN VISILE POSIZIONE TUE LTERLE IN LTERL POSITION ON PROFILO WITH RISSTO LOW PROFILE L = 5mm L 5mm ø52 7 50 5 M2 L IMETL THERMOMETER TS WITH DOULE SLE (0-20) e F (30-250) 27 58 SERIGRPHY ON REQUEST ON OSTUMER DRWING FLOT GLLEGGINTE Maximum pressure: see page 33 Maximum tightening torque: 0 Nm RUINETTO TP 2 2 2 3 F.lli Giacomello s.n.c. 23
LV/E-S..S2..S3.. VISUL LEVEL GUGES WITH VRILE POSITION SENSORS The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with tap that stop the flow of liquid from the tank to the gauge. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. SPER 28 M0 OR M2 SREWS REESSED IN THE ODY 3 HED SENSOR S L U PROTETION SREEN WITH GRDUTED SLE / DISTNE 3 29 00 S2 S3 ONNETOR INDUSTRIL STNDRD IP. 65/PG7 OPERTION: The float sliding in the tube excites one or more bistable Reeds (or in memory) that close the contact in sequence. The contact opens again only when the fl oat carries out the reverse path. Each sensor can be placed as required along the axis of the level gauge.the sensors can be N.O. (normally open) in presence of liquid (closed in absence of liquid), N.. (normally closed) in presence of liquid (open in absence of liquid), or EXHNGE. 24 F.lli Giacomello s.n.c.
Ø52 42 MX VISILE TUE IN LTERL POSITION WITH LOW PROFILE L = 5mm IMETL THERMOMETER TS WITH DOULE SLE (0-20) ND F (30-250) 27 7 50 58 5 M2 L MIN SERIGRPHY ON REQUEST ON OSTUMER DRWING FLOT Maximum pressure: see page 33 Maximum tightening torque: 0 Nm LV / E - S..S2..S.. SPST ONTTS SPDT ONTTS TP ELETRIL HRTERISTIS POWER OMMUTLE IN.. 40 W 20 W 35 POWER OMMUTLE IN.. 40 V 20 V URRENT STRENGTH IN.. -.. 2.. OMMUTLE VOLTGE 230 VD / V 50 VD / V MOD. NUMER OF SENSORS / DISTNE SREWS SREWS MTERIL (mm) ELETRIL ONTT S ELETRIL ONTT S2 ELETRIL ONTT S3 ELETRIL ONTT S4 POSITION ELETRIL ONTT TUE MTERIL TEMP. ( ) FLOT HED MTERIL TEMP. ( ) OR MTERIL TEMP. ( ) TP DEVIES THERMOMETE R SERIGRFI TEMPERTURE SENSOR NUT LV/E-S 2 3 4 MIN. / DISTNE 27 MIN. / DISTNE 7 0 MIN. / DISTNE 220 MIN. / DISTNE 26 0 FROM 27 TO 4000 M2 M0 /2"GS NIKEL PLTED 50 RSS S/STEEL 50 S/STEEL 50 D NIKEL PLTED RSS 50 E S/STEEL O S LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID SPDT O S N LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID SPDT NOTHING O S N LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID SPDT NOTHING O S N LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID SPDT NOTHING 2 RIGHT LEFT METHRYLTE POLYRONT E PYREX -70...+80-50Ö+30-70Ö +250 NYLON-GLSS (RED) 2 P.P. (YELLOW) NR WITH 3 S/STEEL SPIRL (LK) NYLON-GLSS (RED) POLYPROPYLENE- GLSS (YELLOW) PVDF (WHITE) -30...+30 0Ö +00-20Ö +20 2 NR FKM (VITON) -30Ö +00-25Ö +200 3 SI (SILIONE) -60Ö+200 4 HNR -40Ö+30 5 EPDM -45Ö+55 6 FEP (FKM-SILIONE) -60Ö+205 7 MFQ (FLUOROSILIONE) -65Ö+75 0 WITHOUT R R2 R3 R4 WITH LOWER TP NIKEL PLTED RSS L= 50 mm WITH TWO TPS NIKEL PLTED RSS L= 50 mm WITH M2 S/STEEL LOWER L= 50 mm WITH 2 M2 S/STEEL TP L= 50 mm 0 WITHOUT TS WITH LOWER THERMOMETER external bimetallic (includes M2-) (Excludes R-R2-R3 -R4) WITHOUT WITH SERIGRPHY ON USTOMER'S DESIGN ON REQUEST FOR QUNTITIES 0 WITHOUT PT 00 2 PT 000 0 WITHOUT WITH 2 NUTS GLVNISED STEEL LV/E-S 3 800 M2 N R TS 0 0 F.lli Giacomello s.n.c. 25
LV/E+S..S2..S3.. VISUL LEVEL GUGE WITH MINIMUN SIGNL ND VRILE POSITION SENSORS The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with tap that stop the flow of liquid from the tank to the gauge and with bimetallic thermometer. The / distances of 27 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, custom made according to needs. The U protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90 to obtain visibility on the right or left. SPER 28 M0 OR M2 SREWS REESSED IN THE ODY 3 HED SENSOR L U PROTETION SREEN WITH GRDUTED SLE / DISTNE 3 29 00 S S2 S3 ONNETOR INDUSTRIL STNDRD IP. 65/PG7 E MIN. LEVEL ONTT OPERTION: The float sliding in the tube excites the contacts Reeds. The sensors (S..S2..S3) can be SPDT or SPST bistable (or with memory) that close the contacts in sequence. The contacts opens again only when the float carries out the reverse path. Each sensor can be placed as required along the axis of the level gauge. The contact E can be SPDT or SPST N.O. (normally open) in presence of liquid (closed in absence of liquid), N.. (normally closed) in presence of liquid (open in absence of liquid). 26 F.lli Giacomello s.n.c.
Ø52 42 MX VISILE TUO VISIILE TUE IN IN LTERL POSIZIONE POSITION LTERLE WITH ON PROFILO LOW PROFILE RISSTO L = 5mm IMETL THERMOMETER TS WITH DOULE SLE (0-20) ND F (30-250) 27 7 50 58 5 M2 L SERIGRPHY ON REQUEST ON OSTUMER DRWING GLLEGGINTE FLOT MIN Maximum pressure: see page 33 Maximum tightening torque: 0 Nm TP RUINETTO 35 F.lli Giacomello s.n.c. 27
LV/M MINITURE VISUL LEVEL GUGES 76-27-254 mm 27 5 Level indicators of LV / M series allow to control, at all times, the level of liquid consistently, clearly and precisely. PRINIPLE OF OPERTION The principle used is that of communicating vessels: the liquid from the container, where the gauge is applied by means of screws, through the hollow transparent tube, revealing the precise point reached within the tank. OPTIONS - c/c distances 76,27,254 mm (+ -), interchangeable with almost every visual levels in the market - Different polymeric materials used for the transparent tube, blocks and O-ring - Version of stainless steel ISI 36 in the metallic parts in contact with the liquid LLUMINIUM PROTETION 25 3 / DISTNE = 76-27 - 254 USEFUL OPENING 25 4 5 TEHNIL DVNTGES - onstant and continuous indication of the level of the liquid - ll the handmade article is protected from shocks by using a profile U anodized aluminium - Useful light excellent in relation to the c/c distance - Not being a rigid handmade article, it is possible to correct small defects of implementation (wheelbase + - mm) and small orthogonal errors. Maximum pressure: see page 33 Maximum tightening torque: 0 Nm 28 F.lli Giacomello s.n.c.
LV/M-76-S LV/M-27-S LV/M-254-S MINITURE VISUL LEVEL GUGES / DISTNE 76 mm WITH MINIMUM ELETRIL ONTT GUGES / DISTNE 27 mm WITH MINIMUM ELETRIL ONTT GUGES / DISTNE 254 mm WITH MINIMUM ELETRIL ONTT SPER NIKEL PLTED RSS h.6 3 5 27 / DISTNE 32 34 25 20 4 40 Point of control 5 25 62 34 42 Level indicators of LV / M series allow to control, at all times, the level of liquid consistently, clearly and precisely. PRINIPLE OF OPERTION The principle used is that of communicating vessels: the liquid from the container, where the gauge is applied by means of screws, through the hollow transparent tube, revealing the precise point reached within the tank. OPTIONS - Different polymeric materials used for the transparent tube, blocks and O-ring - Version of stainless steel ISI 36 in the metallic parts in contact with the liquid Ø 5 30 NR Float lack color (-50 to +2 ) Spiral in S/Steel isi 36 to prevent adhesions with the pipe Magnet ELETRIL HRTERISTIS OF THE MINIMUM SENSOR POWER OMMUTLE IN.. POWER OMMUTLE IN.. URRENT STRENGTH IN Maximum pressure: see page 33 Maximum tightening torque: 0 Nm OMMUTLE VOLTGE.. -.. 40 W 40 V 2. 230 VD / V TEHNIL DVNTGES - onstant and continuous indication of the level of the liquid - ll the handmade article is protected from shocks by using a profile U anodized aluminium - Useful light excellent in relation to the c/c distance - Not being a rigid handmade article, it is possible to correct small defects of implementation (wheelbase + - mm) and small orthogonal errors. - Electrical signal by bistable sensor F.lli Giacomello s.n.c. 29
LUN UNIVERSL LEVEL INDITORS WITH VRILE LENGTHS IN NYLON-GLSS LMU UNIVERSL LEVEL GUGES IN NODISED LUMINIUM (ISI 36 S/STEEL ON REQUEST) 35 0 35 3/8 GS LMPING UNION H. 22 6 45 LOK 29 SREEN TRNSPRENT TUE / DISTNE 50-4000mm SREEN YLINDRIL FLOT O.R. SEL OK 76 This type of visual level, medium-sized and high solidity, is normally composed of two bodies in which is houses a transparent tube, reinforced and protected by a half-round profile in anodised aluminum which also acts as a contrast screen. 30 F.lli Giacomello s.n.c.
LUN UNIVERSL LEVEL GUGES WITH VRILE LENGTHS IN NYLON-GLSS LMU UNIVERSL LEVEL GUGES IN NODISED LUMINIUM (ISI 36 S/STEEL ON REQUEST) USE: Done to provide a visual control of liquids in tanks. Our levels are suitable for: - Hydraulic power packs - Tanks containing water, diesel oil, mineral oils with viscosity not higher than 220 cst and all other liquid to the exclusion of acids or substances which are flammable. OPERTION: The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. POSSIILITY: Through a full range of components, our levels can meet more special needs, with a low cost. - The bodies can be in nylon fiberglass reinforced or in anodized aluminum or stainless steel ISI 36. - The tubes are provided in acrylic or pyrex glass. - The fittings 3/8 GS, normally supplied in nickel-plated brass, can be requested in ISI 36; in the fitting place you can required a tap available in nickel-plated brass or ISI 36. - On request all levels can be supplied with a bimetallic thermometer probe (L = 70mm) with body in chrome-plated brass casting of 40 mm diameter probe 0 20 (the thermometer is supplied to the built-fitting locking 3/8 GS). Maximum pressure: see page 33 Maximum tightening torque: 0 Nm F.lli Giacomello s.n.c. 3
MIN. / DISTNE=50 LMU + IE VISUL LEVEL GUGES IN METL WITH MINIMUM SIGNL 35 65 ONNETOR INDUSTRIL STNDRD IP. 65/PG7 Maximum pressure: see page 33 Maximum tightening torque: 0 Nm USE: Designed for a visual and electromagnetic control of liquids in tanks with possibility of sending a luminous/acoustic signal at a distance, or activating or disconnecting the electrical circuit connected to it. The electromagnetic control can be of minimum or maximum (or minimum and maximum). Our electromagnetic Levels are suitable for: - hydraulic power packs - tanks containing water, gas oil, mineral oils with viscosity not higher than 220 cst and all other liquids except acids or flammable substances. OPERTION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distance, the contact, activated by the magnet housed in the float, opens or closes. S.P.D.T (exchange) contacts are also provided for. POSSIILITIES: The ranges differ in the number of electrical contacts. In the more complete version (LMU + IE/2) there are two contacts, for minimum and maximum level. On request, they can be provided with a 70 mm long bimetal probe thermometer with Ø 40 mm body in chromed cast brass and scale of 0 to 20 (the thermometer is incorporated in the clamping union). LMU + IE2 METL VISUL LEVEL GUGES WITH MINIMUM ND MXIMUM SIGNL MIN. / DISTNE=200 60 60 30 90 0 20 VISUL LEVEL GUGE HRTERISTIS: The electromagnetic level gauge is incorporated in the connection block; the electrical connector on the side of the level gauge lower block is only for minimum, upper if only for maximum, or on both blocks if minimum and maximum. To have the connector in the best position for connection of the wires (left or right side), just turn the screen 80. Tubes in methacrylate or pyrex glass. Nickel-plated brass 3/8 GS thread or ISI 36 s/steel clamping screws. VERSION LMU+IE LMU+IE2 / DISTNE 50-4000 P TUE METHRYLTE PYREX (-70..+250 ) LOKS NODISED LUMINIUM WITH NR FLOT ENLOSED 2 3 FLOT OF THE VISUL NYLON-GLSS (RED) NR (LK) WITHOUT LOWER ONNETION UPPER ONNETION RSS PLTED SREW =58 RSS PLTED SREW =58 NR (-30..+00 ) WITHOUT S WITHOUT RSS PLTED SREW =68 RSS PLTED SREW =68 2 FKM (-25..+200 ) ISI 36 S/STEEL SREW =68 ISI 36 S/STEEL SREW =68 3/8"GS RSS PLTED TP RSS PLTED TP LUMINIUM R0 R0 OPEN/ DOWNLOD/LOSE OPEN/ DOWNLOD/LOSE -IMETLLI PLUGGED INTO 3 E.P.D.M. (-45..+55 ) RSS PLTED RSS TP RSS PLTED RSS TP R R LOWER SREW OPEN/ LOSE OPEN/ LOSE T - EXLUDES THE TP ISI 36 S/STEEL TP R2 - USED ONLY WITH OPEN/ DOWNLOD/LOSE ONNETIONS LOWER - 4 SILIONE (-60..+200 ) ISI 36 S/STEEL TP 3/8"GS R2 OPEN/ DOWNLOD/LOSE S/STEEL T LUMINUM P WITH RETHER 5 FEP (-60..+205 ) UPPER ELETRIL ONTT LMU+IE 000 P S 2 N THERMOMETER O-RING NUT LOWER ELETRIL ONTT O S LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID EXHNGE SPDT N O S WITHOUT (ONLY FOR LMU+IE) LOSED IN SENE OF LIQUID OPEN IN SENE OF LIQUID EXHNGE SPDT 32 F.lli Giacomello s.n.c.
VISUL LEVELS: PRESSURE TLE F.lli Giacomello s.n.c. 33