PRODUCT BROCHURE Better data means better CPR. CODE-STAT DATA REVIEW SOFTWARE For Hospitals
CODE-STAT software gives you the data you need to improve CPR quality. CPR can always get better. CODE-STAT data review software helps ensure that your teams get the information they need in order to learn from every resuscitation. Fast, high-quality feedback leads to steady improvement in CPR quality. AHA Consensus Statement recommendations on CPR quality suggest maintaining continuous quality improvement on provider, team and systems levels. CODE-STAT software helps automate this process and provides CPR quality measures on demand or automatically during the device self-check.
CODE-STAT software gives you quick access to relevant, high-quality data including compression fraction (hands-on time), compression, longest pauses and time elapsed before first shock. That means it s simpler to focus on areas of improvement, so your code team is better prepared for the next event. Continual improvement leads to better survival s and better neurological outcomes for your patients. CODE-STAT software also simplifies data collection for AHA Get with the Guidelines and internal review. This saves time, money and resources that are better spent elsewhere. Your code committee can use comprehensive, evidence-based data to drive CPR improvements and help meet AHA and ERC guidelines. Now that we have the ability to look at our own performance data, our new philosophy is measure, improve, measure, improve. Michael Swenson, RN EvergreenHealth, Kirkland, WA
The CODE-STAT Device Type: LIFEPAK 12 Duration: :15:18 Power On: Detailed, customized information enhances CPR quality improvement. Power On: CPR Annotations Edited: Device Configuration: As soon as your team applies pads and turns on the LIFEPAK device, data is being collected. After a *Times have been adjusted by the system 7/21/213 8:5:13 PM No GOIIG3GG7P Device Type: LIFEPAK 12 7/21/213 8:5:13 PM Incident ID: 213721811213913 CPR Annotations Edited: 657TrueCPR57 Device Configuration: No GOIIG3GG7P Statistical Parameters: 1-3-3-5 *Times have been adjusted by the system resuscitation, data can be transmitted from the LIFEPAK device to CODE-STAT Compressions software. ratio Then you Compression can compile a report Compressions for your ratio Quality Improvement Compression (QI) team to Compression quickly review, annotate Compressions (/total time) and pass along to your code team (/total time) Device Type: LIFEPAK 12 Duration: :15:18 with target 6 while the incident is still fresh in their minds. 2 8 1 12 2 6Power On: 8 1 7/21/213 12 8:5:13 PM Incident ID: 213721811213913 6 6 1 CPR Annotations Edited: 6 No 1 657TrueCPR57 2 8 16 2 Device 8 Configuration: GOIIG3GG7P 16 Statistical Parameters: 1-3-3-5 2 8 2 18 *Times have been adjusted 2 by the system 18 Device 1 Type: LIFEPAK 12 2 Duration: 1 2 Power On: 1 7/21/213 8:5:13 PM Incident ID: 2 Compressions ratio Compression Compression CPR 12:28 report Compressions / 13:9 CPR = Annotations 9 Edited: No 11/minute 2.1 in 6 12:28 (/total / 13:9 time) = 9 11/minute 2.1 in 2 with / target 281 Device = 71 Configuration: GOIIG3GG7PCO2 (mmhg) Statistical Parameters: 1 Device Type: LIFEPAK 12 Duration: :15:18 6 8 1 12 Power CO2 On: (mmhg) 7/21/213 2 8:5:13 PM Incident ID: 2 *Times 3 213721811213913 have 6 been adjusted 5 by the system 6 7 8 9 1 11 5 CPR Annotations Edited: No 657TrueCPR57 2 3 5 6 6 7 1 8 9 1 11 12 13 1 15 5 Device Configuration: GOIIG3GG7P Statistical Parameters: 1-3-3-5 2 8 16*Times have been adjusted by the system Compressions 25 2 ratio 8 Compression Compression 25 (/total time) 2 18 Compressions ratio Compression Compression Compressions 1 (/total 2 time) :: 6 with 1 target :3:27 8 1 12 2 :6:5 6 8 1 12 2 6 :: :3:27 :6:5 :1:22 :13:9 6 1 6 1 12:28 / 13:9 = 9 11/minute 2.1 in 2 2 / 2818= 71 16 Summary 2 8 16 2 8 Device Type: LIFEPAK 12 Summary Duration: :15:18 CO2 (mmhg) 2 18 Compressions done 2 = 12:2818 Compressions not done Power On: 7/21/213 8:5:13 PM Incident 1 ID: 2 213721811213913 2 3 5 6 7 8 9 1 11 12 13 1 15 1 Compressions 5 done = 12:28 Compressions not done = 1:21 CPR Annotations gaugesedited: No 657TrueCPR57 Compression count 1 = 137 2 EtCO 2 trend Longest datacompression pause 12:28 / 13:9 = 9 11/minute 2.1 in 2 / 281 = 71 GOIIG3GG7P = 137 Statistical Longest Parameters: compression 1-3-3-5 pause :27 CO2 (mmhg) 12:28 Pauses / 13:9 over 1 = 9 sec Compression Device Configuration: count 25 These display CPR 2 3 5 6 7 8 9 1 11 12 11/minute = 2 This section displays 2.1 CO in 2 trend 13 1 15 Pauses 5 *Times over have 1 been sec adjusted by the system = 2 statistics calculated data, CO2 if CO (mmhg) 2 measurements 25 CPR QUIK-VIEW Interva 2 3 5 6 7 8 9 1 11 12 during :: the entire event. CPR QUIK-VIEW :3:27 :6:5 :1:22 :13:9 are available. Interval 5 Compressions ratio Compression Compression Compressions Statistics :: :3:27 :6:5 min:1:22 :13:9 1 min (/total time) Summary with target ratio, min 1 min 25 Summary With target 6 8 1 12 2 ratio, 6 Power On Compressions done = 12:28 Compressions done Compressions = 12:28 not done Compressions not done = 1:21 = 1:21 6 Power 1 On -1: Compression count = 137 pause = 2 Compression -1: 8 count 16 = 137 Longest compression 2pause = :27 Pauses over 1 sec = 2 :8 78 16 Pauses :over 1 sec 2 18 = 2 78 16 Summary CPR QUIK-VIEW 1: Interval Statistics 86 16 Longest :: compression :3:27 :27 :6:5 :1:22 1 1: 2 min 86 1 min 16 1 Compressions With target CPR QUIK-VIEW Interval ratio, Statistics 2:done = 12:28 Compressions 8not done 16 2: Power On 12:28 / 13:9 = 9 11/minute 2.1 in 8 2 16Compression / 281 = 71 3: count = 137 Longest compression 97 pause 111-1: min 1 min With target 3: CO2 (mmhg) : ratio, 97 111 Pauses 78 over : 1 sec 16 = 2 1 11 2 3 5 6 Power 7 On 8 1: 9 1 11 12 13 86 1 1615 : 1 11 5: -1: 2: 8 16 CPR QUIK-VIEW 55 Interval 11 Statis 5: 3: 55 11 97 6: 2. 111 1 17 : 78 16 6: : 1 17 1 min 2.1 11 89 1 min 7: ratio, 1 17 1: 5: 86 16 55 11 2. :: 7: :3:27 :6:5 1 17 2.1 88 6: :1:22 1 :13:9 Power On 8: 17 2.1 89 Customizable summary 1 11 2: 8 16 8: 7: -1: 1 11 1 1.9 17 2.1 32 88 CPR QUIK-VIEW Summary 9: 3: This section captures 82CPR data 113 8: 97 111 : 1 11 1.9 32 78 16 CPR 9:QUIK-VIEW 82 113 9: 82 9/1/21 6:29:1 113 PM at a glance Your Organization and can Name include pressions done : = 12:28 Compressions not done 1 11= 1:21 9/1/21 6:29:1 PM 9/1/21 6:29:1 Your PMOrganization Name Your Organization 1: 1996-21 Physio-Control, Inc. All rights reserved. Name Page 1 Page of 21 of 2 86 16 data review program is 1996-21 Physio-Control, Inc. All rights reserved. CODE-STAT Reports 17...2 1996-21 Physio-Control, Inc. All rights reserved. CODE-STAT Reports 17...2 many factors, such as: pression count 5: = 137 Longest compression pause 55 11= 2: :27 2. 8 16 a continuous time scale es over 1 sec 6: = 2 1 17 2.1 89 Compressions done displaying compressions 3: 97 111 (red 7: 1 17 CPR lines QUIK-VIEW ) and ventilations Interval Statistics : 2.1 88 Compressions 1not done 11 (blue 8:ventilation marks, 1 11 5: 1.9 32 Longest compression 55 pause 11 min 1 min not With target 9: shown), segmented ratio, 82 113 6: 1 17 Interval statistics Pauses over N seconds 9/1/21 into intervals 6:29:1 Power PMused On to Your Organization Name Page 1 of 2 7: 1996-21 Physio-Control, Inc. All rights reserved. CODE-STAT Reports 17...2 in length 1 17 : calculate statistics. This table contains CPR statistics 8: 1 11 : 78 16 calculated for each segment 9: 82 113 : 86 16 of the CPR QUIK-VIEW time 9/1/21 6:29:1 PM Your Organization Name scale. Statistics and intervals : 8 16 1996-21 Physio-Control, Inc. All rights reserved. are customizable. : 97 111 : 1 11 : 55 11 2. : 1 17 2.1 89 Duration: Incident ID: Statistical Paramete Compression
Aggregate summary reports Get the big picture. This aggregate report lets you view multiple cases, consolidate information and view performance over any length of time or selection of cases. Select the criteria that matter most to you for planning, reporting and training purposes. CPR summary report CODE-STAT database: City Hospital Number of Cases: 57 Number of Selected Cases: 7 Statistical Parameters: 1-3-3-5 Selection Criteria: All cases, CPR cases CPR Summary Selection Criteria: Cases that do not meet CPR perfomance goals Note: This report lists the cases that do not meet the following CPR performance goals:compressions ratio, Compression, Compressions/minute, Ventilations/minute. ratio, 7/21/213 7:56:9 PM LIFEPAK 1 79 Incident ID Case start Device 2137218112139 13657TrueCPR57 2137218112139 13657TrueCPR57 2137218112139 13657TrueCPR578 7/21/213 7:56:9 PM LIF 7/23/213 1:3:13 PM LIF / min Vent./ min 18 17 Longest pause Shocks 1 3 3 Any ROSC CPR edited? Customizable case review Get the data you need when you need it. This report shows that 7 of 57 cases did not meet your specific CPR performance goals, including compressions ratio, compression, compressions per minute, ventilation and ventilations per minute. This helps track performance change over time, to help spot trends.
CODE-STAT software highlights Improving quality of care Identify CPR performance variations Easily edit auto-annotations for compressions and ventilations Calculate CPR statistics, such as compression and hands-on time Simplify performance review Customize success metrics Improving case review Download, review, manage and analyze data Organize case summaries View multiple continuous waveforms View EtCO 2 trend data Incorpo data from the TrueCPR coaching device Improving data management Organize patient files electronically in a central location Improve event documentation Create customized benchmarking and trending reports Export case data in XML format Customize data configurations to suit your unique needs with Microsoft SQL Server
Improve care with CODE-STAT data review software. Automate data collection from LIFEPAK devices Recreate incidents by viewing waveforms in playback including audio, if recorded Add notes, photos or annotations for a more comprehensive event record Identify areas for improvement to raise care levels and meet guidelines Provide feedback to caregivers in a simple format as part of the QI process All claims valid as of November 21. For further information, contact Physio-Control at 8.2.112 (U.S.) or 8.895.5896 (Canada) or visit our website at www.physio-control.com. Physio-Control Headquarters Redmond, WA 9852 www.physio-control.com Customer Support P.O. Box 976 Redmond, WA 9873 Toll-free: 8.2.112 Fax: 8.26.89 Physio-Control Canada Physio-Control Canada Sales, Ltd. 7111 Syntex Drive, 3rd Floor Mississauga, ON L5N 8C3 Canada Toll-free: 8.895.5896 Fax: 866.3.6115 21 Physio-Control, Inc. GDR 33287_A