3811-1-RL 1/8 O.D. Copper Material: High pressure copper Working Pressures: to 2,500 psig Static Burst Pressure: over 10,000 psig 0.062 Use With: Ferrule tubing connectors: 3810-1, 3810-2, 11923 NYT1-0403-CLT- VYH1-0402-CLT- Consult factory for custom colors VYH1-0804-CLT- Consult factory for custom colors 3/32 I.D. Nylon 1/16 I.D. 80A Vinyl Hose 1/8 I.D. 80A Vinyl Hose Material: Semi-flexible nylon tubing Color: Clear / Translucent Working Range: to 250 psig Static Burst Pressure: Approx. 1,000 psig Use With: Ferrule tubing connectors: 11923, 3810-1, 0.093 3810-2 Forming: May be formed into sharp corners with heat Type: Flexible, durable vinyl plastic hose Working Range: 0 to 105 psig at 70 F maximum 60 psig Use With: Hose fittings: 11752-2 and clamp 5000-4 0.062 Bend Radius: 3x hose Color: Translucent: Clear Working Range: 0 to 105 psig at 70 F maximum 60 psig Use With: Hose fittings: 11752-1, 11752-3 and 11924 Hose clamps: 5000-2 Bend Radius: 3x hose Color: Translucent: Clear VYH2-0804-GYS- 1/8 I.D. Twin Vinyl Hose 0.562 Type: Flexible, durable vinyl plastic hose, but two hoses molded together, one side has rib entire length for identification Color: Solid: Gray/Gray Use Clamp: 5000-1 Working Range: 0 to 150 psig at 70 F maximum 60 psig Use: Ideal for feeding supply in on one line and out on the other, reduces labor; makes neat assembly; may be parted with any sharp cutting edge 342 Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
URH1-0402- - 1/16 I.D. 85A Polyurethane Hose 0.062 Color: Solid: Black, brown, white, gray, orange Translucent: Clear, blue, green, red, yellow Bend Radius: 3/16 In normal application hose clamps are not required URH8-0402-02T-050 1/16 I.D. 85A Polyurethane Ribbon Hose 0.062 1 Type: Flexible, durable urethane hose Working Range: 0 to 105 psig at 100 F maximum 120 F Color: Solid: Gray, white Translucent: Blue, green, orange, purple, red, yellow Bend Radius: 3/16 In normal application, hose clamps are not required URH1-0804- - 1/8 I.D. 85A Polyurethane Hose Static Burst Pressure: Approximately 425 psig at 70 F Color: Solid: Black, brown, white, gray, orange Translucent: Clear, blue, green, red, yellow In normal application hose clams are not required with hose when used with Clippard hose barb fittings URH2-0804-01S- Twin 1/8 I.D. 85A Polyurethane Hose 0.500 Working Range: 0 to 105 psig at 100 F Static Burst Pressure: Approximately 425 psig at 70 F Color: Solid: Gray and black combination Use: Ideal for feeding supply in on one line and out on the other; reduces labor; makes neat assembly; may be parted with any sharp cutting edge In normal application, hose clamps are not required with URH2-0804-01S hose when used with Clippard hose barb fittings URH8-0804-02T-050 1/8 I.D. 85A Polyurethane Ribbon Hose 2 Type: Flexible, durable urethane hose Working Range: 0 to 105 psig at 100 F maximum 120 F Color: Solid: Gray, white Translucent: Blue, green, orange, purple, red, yellow In normal application, hose clamps are not required Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com 343
URT1-0503- - 5/32 O.D. 95A Polyurethane 0.157 0.093 Color: Solid: Black, gray, orange, red, white Translucent: Blue, clear, green, red, yellow Designed for use with push-in fittings. URT1-0604M- - 6 mm O.D. 95A Polyurethane 6 mm 4 mm Static Burst Pressure: Over 450 psig at 70 F Color: Solid: Black Translucent: Blue, clear, green, red Designed for use with push-in fittings. URT1-0805- - 1/4 O.D. 95A Polyurethane 0.160 Static Burst Pressure: Over 450 psig at 70 F Color: Solid: Black, gray, orange, red, white Translucent: Blue, clear, green, red, yellow Designed for use with push-in fittings. URT1-0805M-CLT- 8 mm O.D. 95A Polyurethane 8 mm 5 mm Static Burst Pressure: Over 465 psig at 75 F Color: Clear Bend Radius: 3/4 Designed for use with push-in fittings. URT1-1208- - 3/8 O.D. 95A Polyurethane 0.245 Static Burst Pressure: Over 440 psig at 75 F Color: Solid: Black Translucent: Blue, clear, green, red Bend Radius: 7/8 Designed for use with push-in fittings. 344 Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
URT1-1610-CLT- 1/2 O.D. 95A Polyurethane 0.500 Static Burst Pressure: Over 420 psig at 75 F Color: Clear Bend Radius: 1 1/8 0.320 Designed for use with push-in fittings. PET1-0503- - 5/32 O.D. 50D Polyethylene 0.157 0.106 Static Burst Pressure: Over 540 psig at 75 F Designed for use with push-in fittings. PET1-0604M- - 6 mm O.D. 50D Polyethylene 6 mm 4 mm Static Burst Pressure: Approximately 560 psig at 75 F Bend Radius: 1 1/4 Designed for use with push-in fittings. PET1-0805- - 1/4 O.D. 50D Polyethylene 0.170 Static Burst Pressure: Approximately 480 psig at 75 F Bend Radius: 1 1/4 Designed for use with push-in fittings. PET1-1208- - 3/8 O.D. 50D Polyethylene Static Burst Pressure: Approximately 600 psig at 75 F Bend Radius: 2 Designed for use with push-in fittings. Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com 345
CLIPPARD CLAMPS 5000-1 Quick Set Hose Clamps Type: Zinc plated steel Use: 5000-1 with twin vinyl hose 5000-1A Quick Set Hose Clamps Type: Zinc plated steel Use: 5000-1A with braided hose 0.281 0.343 0.312 0.437 0.562 5000-2 Reusable Hose Clamps Material: Brass, self-threading, reusable Use With: 11765 Buna-N hose VYH1-0804-CLT vinyl hose and Clippard hose fittings Installation: Slip sleeve over hose, push onto fitting, then screw into place; tighten with wrench 11/32" hex. Options: (-ENP) 5000-4 Press-On Hose Clamp 0.031 0.156 Material: Brass, press-on hose clamp Use: for VYH1-0402-CLT hose 1/16 I.D. vinyl Installation: Simply place hose clamp over hose with flange end out; then press hose partially onto fitting, then slide clamp back toward fitting to secure 0.187 Options: (-ENP) Polyethylene vs Vinyl vs Polyurethane Polyurethane offers a wider range of chemical compatibility than Vinyl, it may be used at much higher temperatures and clamps are not needed when used with barb fittings. Linear low density polyethylene offers a lower cost alternative to polyurethane and superior environmental stress crack resistance over standard polyethylene. Both polyurethane and polyethylene are FDA approved. Typical Hose & Bend Radii When using hose or tubing, care should always be taken to avoid sharp bends to prevent compressing the inside diameter of the hose or tubing and restricting flow. For extremely close connections, allow a short loop of hose to avoid crimping. Clippard Hose & I.D. Min. Bend O.D. Radius 3811-1-RL Copper Tube 1/16 1/8 3/8 NYT1-XXX Nylon 3/32 1/8 3/8 VYH1-XXX 80A Duro. Vinyl Hose 1/16 1/8 3/8 VYH1-XXX 80A Duro. Vinyl Hose 1/8 1/4 1/2 VYH2-XXX Dual Vinyl Hose 1/8 1/4 1/2 URH1-XXX 85A Duro. Polyurethane Hose 1/16 1/8 3/16 URH8-XXX Ribbon 85A Duro. Polyurethane 1/16 1/8 3/16 URH1-XXX 85A Duro. Polyurethane Hose 1/8 1/4 3/8 URH2-XXX Dual 85A Duro. Polyurethane 1/8 1/4 3/8 URH8-0804-XXX Ribbon 85A Duro. Polyurethane 1/8 1/4 3/8 URT1-0503-XXX 95A Duro. Polyurethane 3/32 5/32 3/8 URT1-0604M-XXX 95A Duro. Polyurethane 4 mm 6 mm 1/2 URT1-0805-XXX 95A Duro. Polyurethane 0.160 1/4 1/2 URT1-0805M-CLT 95A Duro. Polyurethane 5 mm 8 mm 3/4 URT1-1208-XXX 95A Duro. Polyurethane 0.245 3/8 7/8 URT1-1610-XXX 95A Duro. Polyurethane 0.320 1/2 1 1/8 PET1-0503-XXX 50D Duro. Polyethylene 0.106 5/32 1/2 PET1-0604M-XXX 50D Duro. Polyethylene 4 mm 6 mm 1 1/4 PET1-0805-XXX 50D Duro. Polyethylene 0.170 1/4 1 1/4 PET1-1208-XXX 50D Duro. Polyethylene 1/4 3/8 2 346 Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com