IMPORTANT: All features subject to change without notice.

4.0.1

Table of Contents 1. Contents 4 2. Quick Start 4 3. Icon Key 5 4. Changing GaitSens View / Exiting GaitSens 5 5. Select User 6 6. Validate Setup 7 7. Therapist View 8 8. My Goals 9 9. Replay Session 10 10. Analysis 10 11. Export Report 12 12. User View 14 13. Balance 16 14. Select Units 23 15. Importing Archived Users 24 16. Updating GaitSens Using Google Play: 24 17. Calibration 25 18. Reference - Gait Parameters 26 19. Reference - Normal Values 28 20. Warranty 29 IMPORTANT: All features subject to change without notice. 3

1. Contents a. Instrumented GaitKeeper Treadmill / Walking Surface. b. GaitSens 2.0 Software installed on Android tablet. c. Charger cord for tablet for Android tablet. IMPORTANT: GaitSens 2.0 is intended for light commercial, rehabilitation, and home use. 2. Quick Start Congratulations on the purchase of the GaitSens 2.0 gait analysis software designed specifically for the busy rehabilitation clinic. This quick reference guide will help you get your GaitSens running quickly. a. Plug the GaitSens enabled treadmill into an appropriate electrical outlet per the specifications of the treadmill. GaitSens is powered from the treadmill so does not require any additional outlet plug. b. Wait at least 15 seconds after the treadmill has been plugged in before opening the GaitSens application in the tablet for Android. c. Click on the GaitSens icon in the provided tablet. Within Bluetooth Range (Less than 30 feet away from treadmill) Outside Bluetooth Range (Greater than 30 feet away from treadmill) Initialize Treadmill i. Ensure treadmill is level with all four adjustable feet touching ground. ii. Remove all weight from the treadmill and ensure the treadmill is not touched during initialization iii. Press Initialize. Error Prompt to: Quit close out the treadmill application Run Disconnected Run the application without connection to review previously recorded sessions. Connect Attempt to reconnect. IMPORTANT: If the treadmill has been moved since the last use of GaitSens, for best results validate that the zero values are accurate. Complete Validation Instructions found on page 7. 4

3. Icon Key Therapist View Select User Add User Start Session View Report Scale Selected - Enable Video Video Selected - Enable Scale Open Session Therapist View Session/Replay Event Marker Start Duration Marker Stop Duration Marker Enable Video Cancel Video Record Stop Record Report - Icon Key User View Export Report PDF / Data File Return to Therapist View without Email Report Print Report Save Report Balance - Test Conditions Both Feet Left Foot Right Foot Both Feet on Foam Left Foot on Foam Right Foot on Foam 4. Changing GaitSens View / Exiting GaitSens Click to select view from drop down list. Select preferred view. GaitSens defaults to Therapist view. Enable Balance Mode. Switch to BiSym App. To exit software select Quit or tablet Back icon. 5

5. Select User a. Therapist View - Select User Before Running Session START HERE Select a User Create a new user. NOTE: Select the preferred measurement units by following instructions on page 23.. The Selected User information is displayed here. b. Therapist View - Selecting User Information Select User from List of existing users. GaitSens will contain a Start Up user. Search for User Information using the initials, name or ID. c. Therapist View - Creating New User Each user profile must include the following. User ID Weight User ID must be unique to each user. The following user fields are optional. First Initial Last Initial Clinician 6

6. Validate Setup (Required only on first use) i. Select default user on the therapist view screen. ii. After the user has been selected, select start session icon to start session. Confirm that weight is reading properly by standing on each of the four corners of the treadmill walking surface. Review the weight value from the Weight Display in the bottom left window for each corner. Each corner should display the same weight reading within +/- 5 lbs. If one corner displays a weight that varies more than +/- 5 lbs, lower the respective adjustable feet until the reading is within the acceptable +/- 5 lbs range. Start Session iii. Repeat process once more to ensure that weight is within +/- 5lbs on each of the corners of the treadmill walking surface. iv. If it is not possible to reach the acceptable range for each of the four corners of the walking surface, recalibrate the GaitSens following the calibration instructions on page 25. If the treadmill does not calibrate properly, please contact the Mobility Research Service & Parts department at 1-800-332-9255. v. Press Stop Session to exit validation and return to the therapist view screen. 7. Therapist View a. Starting Session Start recording a new session for the current user. Load a previously recorded session for the current user. See Section 8.d regarding video capture Load a report if a previously recorded session for the current user. 7

7. Therapist View - Continued a. During Session Swing Phase Time: Bars show each step swing phase measurement in seconds. Total Weight Bearing: Table below shows weight. Butterfly shows position of center of mass as the user cycles through the gait phases (see pg. 26). Dashboard displays speed, distance, steps and steps per minute. Step Length: Bars shows each step length. Step Width: Step width shown in green. Note: Missed steps in the capture of the session will show as a gray bar in each of the measurement parameter boxes. b. During Session Elapsed Time Clock: Time since start of session. Duration Markers Start Duration End recording session Left Toe Up Events Right Toe Up Stop Duration Left Heel Strike Right Heel Strike Event Marker Event Marker c. Therapist View Naming and Saving Event Markers at End of Session Durations are indicated by Markers # - # Event Markers are indicated by Enter optional session name for future reference. Enter optional marker names for future reference. Marker # 8

d. Enable / Disable Video Capture Mode Scale Readout Selected Video Capture Selected Click to enable video capture option. Click to disable video and return to total weight bearing display. e. During Session - Video Enabled When video is enabled a preview will be shown in the video capture window. Press record icon to capture If video is enabled, the session will display preview until Start Record Video icon is s e l e c t e d. W h e n recording, video display has a red outline. Video will be captured for a maximum of 30 seconds, by default*. 8. My Goals * See Settings screen to remove 30 second limitation. a. Set Goals for gait parameters during a session. Goals will be used as comparison values on reports generated from session results For Definition of report p a r a m e t e r s, s e e Reference section on page 26. 9

9. Replay Session a. Replay a Session No Video Start Playback Duration Markers Start Playback Start Duration Pause Playback Stop Duration Event Marker Event Marker b. Replay a Session - Video Playback Enabled Video Markers Video Start Video Stop Event Marker Event Marker 10. Analysis a. Select to analyze between Analyze either the entire duration markers session or the portion selected with Set In and Set Out. Purple bar shows Select to analyze 30 the segment for the seconds analysis. Before Event After Event Indicate the portion of the session to be analyzed and included in the report with Set In and Set Out buttons, while playing back a session. 10

b. C l i c k to generate report c. Record optional comments here Zoom in/out with touch screen. For Definition of report p a r a m e t e r s, s e e Reference section on page 26. Press User View to start feedback session - See User View section on page 14. Select Export to generate a PDF file of report data Select Done to return to the Therapist View without saving the report e. Compare results to previous sessions or a set of normal values (see reference section for definition of Normal values). To compare results to previous session, select the name of the session in the drop down in the top right corner. Select comparison data set. Previous Session Name Normal Values Clear comparison values Comparison results will show as a green bar below each report parameter. Current Session Results Comparison Session Results 11

11. Export Report a. Export Report Data - Generate a PDF and file of report data GaitSens 2.0 allows you to retrieve reports by emailing the report, saving the report and moving it to view on a desktop computer, or printing reports directly from your tablet. After selecting to view a report, select Export. The top line of the popup displayed the defaulted file name User ID-date-time. If desired you can over write this with a different file name. Email Report Print Report Save Report Enter preferred filed name for report data, or accept default. b. Print Report Data Directly from Tablet Plug the short mini USB cord adaptor into the tablet, unplug the USB from your printer, and plug the Tablet into the printer i. Select Save and Print to File 12

ii. Select Nearby USB Select your printer and print. c. Allow Print Share to access USB printer if applicable. d. Transfer to Desktop To transfer the report to a desktop computer, plug the long USB connector from the tablet to the USB port on your desktop. Navigate to the tablet, and locate the GaitSens 2.0 subfolder, and to the subfolder titled with User ID. Below you can see user ID of abcd. Select the PDF or CVS file and move to the desktop. 13

12. User View a. User View - Provides your user with real time audible and visual feedback. Select User View to go to the User View screen. Start Session Press Configure To change the displayed parameter on the User view. b. User View Configurations Select the desired Test Parameter to change. For Definition of report p a r a m e t e r s, s e e Reference section on page 26. Select the preferred adjustment of the selected parameter Symmetry Threshold Increase Decrease Enter units - Percent updates. Enter Percent - Units updates. c. User View Feedback - During Session Goal Threshold Visualization of step feed back. Magenta missed goal Selected test goal Step Ratio Successful steps vs. total steps. Step Percentage Percentage of successful steps measured. 14

d. User View Feedback - During Session Visualization of step feed back. End Session Green - Successful met goal. Target Goal Threshold SECTION INTENTIONALLY LEFT BLANK 15

13. Balance Active User Test Mode Test Duration Selected Test Condition Preview Record / Stop Session Center / Orientation Zoom View Report Balance Test Modes Test Mode Sway Targeting Description Measures the users passive sway distance from a set center point. Measures the users active targeting distance towards changing set points Test Modes Select Balance Mode Click to select test mode. 16

Start Balance Preview Preview shows the position of the user s center of mass. Press to start preview mode. Center and Orientation 1. Position the user in the preferred standing position parallel or perpendicular to the sides of the treadmill. 2. Once stationary, press the icon to set the position of the user s center of mass. 3. Next, set the user s orientation by stepping in the region directly in front of the user. Step in front of user. Click to set center reference point 17

Test Conditions Use the balance mode conditions to record the user s physical stance configuration. Below is list of the standard feet positions commonly tested in the balance mode. For the Sway test, each condition can be set for recording with the user s eyes open or eyes closed. Both Feet Both Feet on Foam Left Foot Left Foot on Foam Right Foot Right Foot on Foam There are an additional 3 optional fields for user defined custom conditions. Select test condition Click to select test condition. Sway Mode - Measures the user s sway distance from a set center point. User s Center of Mass Center of Mass Reference Sway measure distance from the user set center reference point. 18

The sway mode duration can be adjusted to sessions of 30 seconds, 1 minute and 3 minutes. Select Duration Time Session Report - Upon ending the session a session report will be generated summarizing the session. The session report can be saved as a PDF file and view through the PDF viewer on the tablet. Left Anterior Right Anterior Percentage of time spent in quadrant region. Percentage of time spent in semicircle region. Average Distance into the quadrant region. Average Distance into semicircle region. Left Posterior Right Posterior 19

Summary Report - To compare multiple sessions, click the Button on the Balance mode screen. Select up to 5 sessions to view on a single chart. Select Sway Target Mode - Measures the user s active targeting distance towards changing set points Target Region User s Center of Mass 5 seconds before changing position, the target changes color from blue to red. Target measures distance from the user s center mass to a changing target region. 20

The target distance can be set to distances of 1, 2, and 3 inches away from the user s center of mass. Select Target Distance Session Report - Upon ending the session a session report will be generated summarizing the session. The session report can be saved as a PDF file and view through the PDF viewer on the tablet. Average distance in quadrant region. Target Points 21

Summary Report - To compare multiple sessions, click the Button on the Balance mode screen. Select up to 5 sessions to view on a single chart. Select Targeting SECTION INTENTIONALLY LEFT BLANK 22

14. Select Units a. Units can be changed by pressing the icon in the top right hand corner and selecting the DISPLAY UNITS option. Select DISPLAY UNITS S e l e c t t h e dimension to toggle the units for. Select the preferred units. 23

15. Importing Archived Users a. Therapist View - Import Archived Users On Main Therapist View Press and select Import Users. If Desired, i m p o r t p r e v i o u s l y archived users (optional). Identify Archived User by User ID. Each imported user requires completion of the user Weight. The First Initial and Last Initial fields are optional. b. Therapist View - Import Archived Users Return to Therapist View Delete User Import User 16. Updating GaitSens Using Google Play: The update through Google Play requires a Wi-Fi connection to the tablet and a Gmail account. After the tablet is connected to your Wi-Fi, open the Google Play app on the GaitSens tablet. In Google Play you then search GaitSens and download the software. You also can forward this email to the Google account and open the email on the tablet. https://play.google.com/store/apps/details?id=com.mobilityresearch.treadmill3 Once located in Google Play, this should give you the option to install the update. Follow the instructions regarding the installation and open the GaitSens application. If you are unable to install the software, please feel free to contact us at 1-800-332-9255 for alternative update options. 24

17. Calibration NOTE: Calibration should only be performed if values are skewed. Errors in calibration procedure will effect captured data. For assistance during calibration process, please contact the Service & Parts department at 1-800-332-9255 EXT 7104. 1. Click to calibrate GaitSens. 2. Enter your weight. 3. The calibration will first ask for you to stand off of the treadmill. Additional weight to the treadmill will skew the calibration of the instrumentation. 4. Follow the calibration steps as shown below. 5. The final step asks for you to stand off of the treadmill. Additional weight to the treadmill will skew the calibration of the instrumentation. 6. Press Finish to complete calibration. NOTE: Upon completion of calibration a dialogue box will display the Total Calibration correction coefficient. This value is for Mobility Research Use only. If the calibration fails or if you are experiencing issues with the calibration process, please contact the Service & Parts department at 1-800-332-9255 EXT 7104. 25

18. Reference Gait Parameters Gait Parameter Definition How GaitSens Calculates Ave Speed Treadmill belt speed Measures actual speed directly from the treadmill Ave Cadence Steps per minute Divides the total number of steps left and right, by the total time. Stride Time Left / Right Stride Length Left / Right Time between heel strike of selected side to next heel strike of same side (Seconds) Distance between center of mass (COM) at heel strike of selected side to next heel strike of same side, (in or cm) Subtracts timestamp of previous step from timestamp of current step of same foot Subtracts location of previous heel strike from location of current heel strike of same foot relative to the moving frame of the walking belt Step Time Left / Right Time between heel strike of opposite side to heel strike of selected side (Seconds) Subtracts timestamp of previous heel strike from timestamp of current heel strike of opposite feet Step Length Left / Right Distance between COM at heel strike of opposite side to heel strike of selected side (in or cm) Subtracts location of previous heel strike from location of current heel strike of opposite feet relative to the moving frame of the walking belt Stance Left / Right Swing Left / Right Double Support Left / Right Percent of time between heel strike of selected side to toe off of same side, compared to total time of selected side stride (%) Percent of time between toe off of selected side to heel strike of same side, compared to total time of selected side stride (%) Percent of time between heel strike of selected side to toe off of opposite side, compared to total time of selected side stride (%) Divides time between heel strike and subsequent toe off of same foot by time between consecutive heel strikes of same foot Subtracts STANCE percentage from 100% Divides time between heel strike of one foot and subsequent toe off of opposite foot from time between consecutive heel strikes of same foot Base Width Left / Right Medial lateral distance between COM at toe off of opposite side to heel strike of selected side (in or cm) Subtracts average lateral location of left foot during right swing from average lateral location of right foot during left swing 26

Gait Parameter Definition How GaitSens Calculates Avg WB Left / Right Step Length Asymmetry Double Support Asymmetry Average weight supported during each single stance of selected side, averaged with all single stance through the session (lb or kg) Average asymmetry for step lengths of each stride, averaged over all session strides 0= no asymmetry, > 1=no symmetry Average asymmetry of Double Support of each stride, averaged with all session strides 0= no asymmetry, 1= no symmetry Time-average of total measured load during all single-stance phases of gait for one foot Absolute value of difference in step length between left and right foot divided by average step length of both feet abs(rsl-lsl)/(rsl+lsl) RSL = Right Step Length LSL = Left Step Length Absolute value of difference in left and right double support times divided by average of double support times abs(rds-lds)/(rds+lds) RDS = Right Double Support time LDS = Left Double Support time What does the Butterfly mean? Graphical representation of the COM as the user cycles through the gait phases 27

19 - Reference - Normal Values Normal Values: Session results were gathered using a set of 30 "typical" adults who walked on a GaitSens enabled treadmill, at 5 different walking speeds (0.5mph, 1 mph,1.5 mph,2.0 mph, 2.5 mph). The software compares your user s data with the mean of the data collected from this normal population, based upon the average speed of the session. Speed (mph) 0.5 1.0 1.5 2.0 2.5 Stride Length (in) 22.7 29.5 35.9 42.0 47.6 Step Length (in) 11.4 14.7 18.0 21.0 23.8 Stance (%) 74 69 67 65 64 Swing (%) 26 31 33 35 36 Double Support (%) 24 19 17 15 14 Stride Time (s) 2.60 1.70 1.40 1.20 1.10 Step Time (s) 1.30 0.84 0.68 0.60 0.54 Step width (in) 5.9 6.0 6.3 6.2 6.2 Cadence (steps/min) 29 37 46 53 60 SECTION INTENTIONALLY LEFT BLANK 28

Limited Warranty Certificate GaitSens Instrumentation is covered under warranty for 1 year against all defects. Tablet issued for use with GaitSens will be compatible with updates to GaitSens software for a limited duration of 2 years after purchase. After 2 years it may be necessary for the customer to replace their tablet to use a GaitSens update. Tablet issued for use with GaitSens is limited to 3rd party tablet manufacturer specified warranty. No additional warranty is provided. Losses due to work stoppage, lost revenues, damages due to neglect or abuse ARE NOT covered by this warranty. Shipping and handling charges ARE NOT covered by this warranty. Tampering or modification on any and all components by unauthorized personnel is discouraged and will void your warranty. THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. MOBILITY RESEARCH SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF MOBILITY RESEARCH INC. CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO MOBILITY RESEARCH RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION OR ADDITION TO THIS WARRANTY. MOBILITY RESEARCH IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, OR DAMAGE TO EQUIPMENT AND PROPERTY. Warranty excludes damage due to normal wear and tear, tampering with any components, from misuse and abuse, caused by cleaning and acts of God. Warranty does not cover losses due to work stoppage, lost revenue(s), and damages due to neglect. Warranty excludes GaitKeeper Treadmills. Shipping and handling charges are not covered by this warranty. *If present. In order for us to provide the very best in customer support, please activate your warranty by providing the following information. This information will allow us to notify you for product updates, recall information, clinical support, technical support, maintenance information and to receive our E-Newsletter. You may visit our website at http://www.litegait.com/ warranty.html and submit this form or fill in the information below and mail or fax back. (Keep a copy for your records) Products, Education, and Rehabilitation Solutions Mobility Research Inc., P. O. Box 3141, Tempe AZ 85280 Phone: 1-800-332-9255 / 480-829-1727 Fax: 480-829-0737 Email: warranty@litegait.com