First in Carbon Arrows

Stan Potts North American Whitetail TV Michael Waddell Realtree Road Trips TV Mark Kayser Outdoor Writer/TV Show Host Eddie Claypool Outdoor Writer Todd Amenrud Beman Pro Staff Tim Strickland Beman Pro Staff First in Carbon Arrows First in Carbon Arrows 2006

Micro Diameter Maximum Performance Bowhunters have discovered the difference. NEW-GENERATION MICRO-DIAMETER CARBON ARROWS deliver maximum big game performance ACCURACY, DURABILITY, and PENETRATION. Beman s MFX Micro Effect carbon arrow technology combines a patent-pending ultra-small diameter for increased penetration, a heavier mass for power, and patent-pending HIT inserts for perfect broadhead alignment. MFX maximum bowhunting performance only from Beman. Patent-pending UNRIVALED POWER Micro diameter and thick-wall carbon construction deliver strength and durability without sacrificing speed. INCREASED PENETRATION Micro diameter delivers kinetic energy with more penetration than regular carbon arrows. IMPROVED ACCURACY HIT inserts align the broadhead shank directly with the shaft. Patent-pending micro profile resists wind drift. Patent-pending Hidden Insert Technology (HIT ) the point insert system for new-generation small-diameter carbon arrows. Licensed from Easton, the HIT insert aligns the broadhead shank directly against the inside diameter of the MFX arrow shaft for tighter groups with your hunting setup. See MFX Arrows In Action 2 3

MAX-4 MFX NEW Classic MFX You won t find MAX-4 on the tournament range, because Beman engineered MFX arrows with one thing in mind BOWHUNTING. Designed exclusively for serious hunters, MAX-4 features added mass and Advantage MAX-4 camouflage. HIT components and MFX technology provide increased accuracy and greater striking power. Micro-diameter MFX carbon composite Straightness: ±.003" tolerance: ±2.0 grains PhotoFusion Advantage MAX-4 camo Direct-fit X Nock installed HIT Inserts included MFX CAMO CARBON Unidirectional carbon fiber core for precise broadhead and nock alignment. High-strength composite fiber for exceptional durability and hoop strength. Multiple unidirectional layers make MFX shafts more durable than other brands. Micro diameter with High Definition PhotoFusion graphics. (grains/inch) 12.5 11.2 10.4 9.7 RPS Point (inch) 5 / 16 9 / 32 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 7 # 6 # 5 # 5 Advantage is a registered trademark of Jordan Outdoor Enterprises. MAX-4 HD and High Definition are trademarks of Jordan Outdoor Enterprises. HIT Insert 16 gr. X Nock 9 gr. Beman has taken the performance of the Classic to the next level with the addition of MFX Micro Effect and Hidden Insert Technology (HIT ). This means more power, more durability, and more penetration for traditional bowhunters. Great performance with the vintage look of Classic s wood grain finish makes this the best traditional shaft Beman has ever offered. Micro-diameter MFX carbon composite Straightness: ±.003" tolerance: ±2.0 grains Direct-fit X Nock installed HIT Inserts included X Nock 9 gr. MFX WOOD-GRAIN CARBON Unidirectional carbon fiber core for precise broadhead and nock alignment. High-strength composite fiber for exceptional durability and hoop strength. Multiple unidirectional layers make MFX shafts more durable than other brands. Micro diameter with wood-grain PhotoFusion graphics. 340 400 500 (grains/inch) 11.2 10.4 9.7 RPS Point (inch) 9 / 32 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 6 # 5 # 5 HIT Insert 16 gr. 4 Patent-pending 4 5 Patent-pending

NEW Black Max Elite MFX Black Max MFX Die-hard bowhunters demand precision and the Black Max Elite delivers. Exacting tolerances give the extra confidence you need when shooting at the buck of a lifetime. Serious hunters looking for that extra edge, shoot the new Beman Black Max Elite with MFX Micro Effect & Hidden Insert Technology (HIT ). Micro-diameter MFX carbon composite Straightness: ±.001" tolerance: ±2.0 grains Direct-fit X Nock installed HIT Inserts included HIT Insert 16 gr. MFX CARBON X Nock 9 gr. Unidirectional carbon fiber core for precise broadhead and nock alignment. High-strength composite fiber for exceptional durability and hoop strength. Multiple unidirectional layers make MFX shafts more durable than other brands. Ultra-small diameter with a micro-smooth finish. Bowhunters have discovered the benefits of small-diameter arrows and Hidden Insert Technology (HIT ). Hunters report unprecedented levels of Accuracy & Penetration due to the thick-wall, microdiameter construction. Black Max brings you all the POWER of HIT in our proven MFX Micro Effect carbon arrow. Micro-diameter MFX carbon composite Straightness: ±.003" tolerance: ±2.0 grains Direct-fit X Nock installed HIT Inserts included MFX CARBON X Nock 9 gr. Unidirectional carbon fiber core for precise broadhead and X Nock alignment. High-strength composite fiber for exceptional durability and hoop strength. HIT Insert 16 gr. Multiple unidirectional layers make MFX shafts more durable than other brands. Ultra-small diameter with a micro-smooth finish. (grains/inch) 11.7 10.4 9.6 8.9 RPS Point (inch) 5 / 16 9 / 32 9 / 32 17 / 64 Broadhead adapter ring (BAR) # 6 # 5 # 5 # 4 (grains/inch) 11.7 10.4 9.6 8.9 RPS Point (inch) 5 / 16 9 / 32 9 / 32 7 / 64 Broadhead adapter ring (BAR) # 6 # 5 # 5 # 4 Patent-pending Patent-pending 6 7

ICS Hunter Elite The ICS Hunter reigns as Beman s flagship arrow for all-around hunting performance, and the Elite series takes precision one step further. The straightest ICS shaft delivers extra confidence no matter what game is at hand. Straightness: ±.001" tolerance: ±2.0 grains Black, micro-smooth finish Direct-fit Super Nock installed CB Inserts included Optional G Nock system sold separately CB Insert 21 gr. Super Nock 13 gr. High-strength composite fiber for increased mass and exceptional hoop strength. CB Point 80/100 gr. Micro-smooth finish stays clean and dust free and pulls easier from targets. (grains/inch) 9.5 9.3 8.4 7.3 RPS Point (inch) 5 / 16 5 / 16 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 8 # 8 # 7 # 7 ICS Camo Hunter Tough C2 carbon construction combined with the added energy and great look of Mossy Oak Break-Up provides top bowhunting performance. Camo Hunter was designed for bowhunters looking to pull out all the stops in getting an extra margin of performance. Straightness: ±.003" tolerance: ±2.0 grains PhotoFusion graphics Direct-fit Super Nock installed CM Inserts included ICS CAMO CARBON High-strength composite fiber for increased mass and exceptional hoop strength. PhotoFusion graphics and Infinity Performance System. (grains/inch) 10.1 10.0 9.1 8.0 RPS Point (inch) 5 / 16 5 / 16 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 8 # 8 # 8 # 7 Mossy Oak is a registered trademark of Haas Outdoors, Inc. Break-Up is a trademark of Haas Outdoors, Inc. CM Insert 23 gr. Super Nock 13 gr. 8 9

ICS Hunter ICS Hunter arrows feature everything bowhunters need a quiet draw and the right combination of speed and durability. They say archery is a sport of trade-offs, but with the ICS Hunter you have it all. Straightness: ±.003" tolerance: ±2.0 grains Black, micro-smooth finish Direct-fit Super Nock installed CB Inserts included Optional G Nock system sold separately CB Insert 21 gr. Super Nock 13 gr. CB Point 80/100 gr. High-strength composite fiber for increased mass and exceptional hoop strength. Micro-smooth finish stays clean and dust free and pulls easier from targets. (grains/inch) 9.5 9.3 8.4 7.3 RPS Point (inch) 5 / 16 5 / 16 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 8 # 8 # 7 # 7 ICS Hunter Junior Get the durability of our ICS Hunter for bows under 40 lbs. The ICS Hunter Junior features C2 construction and factoryinstalled Super Nocks. An excellent choice for lighter bows and beginner bowhunters. One size fits bows up to 40 pounds tolerance: ±2.0 grains Direct-fit Super Nock installed CB Inserts installed (26"), included (28") Factory fletched with 3" vanes Optional G Nock system sold separately High-strength composite fiber for increased mass and exceptional hoop strength. Micro-smooth finish stays clean and dust free and pulls easier from targets. Up to 40 pounds (grains/inch) 7.3 RPS Point (inch) 9 / 32 Broadhead adapter ring (BAR) # 7 Super Nock 13 gr. CB Insert 21 gr. 10 11

ICS Venture Venture above the rest with outstanding carbon-arrow performance and value. Beman Venture features durable C2 construction with a smooth finish for quiet draw and release. Straightness: ±.006" tolerance: ±2.0 grains Direct-fit Super Nock installed CB Inserts included G Nock system sold separately CB Insert 21 gr. CB Point 80/100 gr. High-strength composite fiber for increased mass and exceptional hoop strength. Super Nock 13 gr. Micro-smooth finish stays clean and dust free and pulls easier from targets. (grains/inch) 9.5 9.3 8.4 7.3 RPS Point (inch) 5 / 16 5 / 16 9 / 32 9 / 32 Broadhead adapter ring (BAR) # 8 # 8 # 7 # 7 ICS Thunderbolt Designed for today s high-performance crossbows. Thunderbolt gives shooters all the advantages afforded by multi-layer C2 composites, which provide the right mix of mass weight, stiffness, and durability. tolerance: ±2.0 grains Black, micro-smooth finish Outside diameter: 22/64" Half Moon Nock 12 gr. Flatback Nock 37 gr. High-strength composite fiber for increased mass and exceptional hoop strength. Micro-smooth finish stays clean and dust free and pulls easier from targets. 20" 22" (grains/inch) 10.5 10.5 RPS Point (inch) 11 / 32 11 / 32 Carbon Bolt Insert (grains) 43 43 Carbon Bolt Insert 12 13

NEW Beman 9.3 Target and 3D shooters know that large-diameter arrows may mean the difference between catching the 10 ring and winning the tournament, or sinking an eight and going home empty handed. That s why Beman engineered the accurate, lightweight Beman 9.3 Big diameter, big performance. Large, 9.3mm diameter Straightness: ±.006" tolerance: ±2.0 grains Super UNI Bushing installed Super Nocks sold separately Beman 9.3 RPS Insert 40 gr. RC CARBON One-piece Bullet Point 80/100 gr. Unique Beman-technology carbon layers provide ultra-consistent, strong, carbon shaft construction. Strong, unidirectional overlays. Super Nock 13 gr. Smooth finish for reduced wear on the arrow rest and easier removal from targets. 340 400 500 (grains/inch) 8.3 7.8 7.1 RPS Point (inch) 11 / 32 11 / 32 11 / 32 RPS Insert (grains) 40 40 40 Super UNI Bushing 9 gr. ICS Energy Designed for target shooters seeking quality at an affordable price. ICS Energy trims the cost, but doesn t sacrifice quality. ICS Energy provides reliable shooting with the accuracy of our G Nock UNI system. Available in a full range of sizes for all types of shooting. Straightness: ±.006" tolerance: ±1.5 grains Black, micro-smooth finish UNI Bushing installed G Nocks & points sold separately One-piece Parabolic Point G Nock 7 gr. High-strength composite fiber for increased mass and exceptional hoop strength. UNI Bushing Micro-smooth finish stays clean and dust free and pulls easier from targets. 360 410 460 520 600 690 780 (grains/inch) 8.3 7.6 7.3 7.1 6.9 6.3 6.3 UNI Bushing (grains) 12 12 10 10 6 4 4 One-Piece Parabolic Point (grains) 90 90 80 80 70 70 70 14 15

2006 Beman Carbon Arrows MFX MICRO-EFFECT CARBON Micro-diameter carbon composite fibers Straightness Finish Sizes ±.003 ±.003 ±.001 ±.003 Advantage Max-4 HD Camo High-Detail Traditional Wood Black Micro- Smooth Finish Black Micro- Smooth Finish 340, 400, 500 High-strength C2 composite fibers Straightness Finish Sizes ±.003 ±.001 ±.003 Mossy Oak Break-Up Camo Carbon Flash Take advantage of strength and low wind drift with the small-diameter Carbon Flash. A great value-priced target shaft from Beman first in carbon arrow. Small-diameter, unidirectional pultruded carbon Available in five sizes Over Nock included G Nock system sold separately Glue-in Point Over Nock 13/64 9 gr. 14/64 12 gr. G Nock Adapter G Nock 7 gr. RC LARGE-DIAMETER CARBON Large-diameter RC carbon N/A ±.006 ±.006 Straightness Finish ±.006 Black Micro- Smooth Finish up to 40 lbs. bow weight 26" & 28" 360, 410, 460, 520, 600, 690, 780 Sizes 340, 400, 500 PULTRUDED CARBON Small-diameter unidirectional carbon Straightness Finish Sizes 570 (14/64 ) 630 (14/64 ) 750 (14/64 ) 900 (13/64 ) 1000 (13/64 ) (grains/inch) 7.2 7.0 6.2 6.4 5.6 Glue-in Point (grains) 70 70 70 54 54 G Nock Adapter (grains) 12 12 12 9 9 ICS CROSSBOW BOLTS High-strength C2 composite fibers N/A Straightness Finish 570 (14/64 ), 630 (14/64 ), 750 (14/64 ), 900 (13/64 ), 1000 (13/64 ) Sizes N/A 20, 22 16 17

Arrow Selection Chart Determining Correct Arrow Length The Correct Arrow Length for any type of bow (including bows equipped with overdraws) is determined by drawing back an extra-long arrow and having someone mark the arrow one inch in front of where the arrow contacts the arrow rest. Correct Arrow Length for hunting arrows with broadheads shot from bows with cut-out sight windows (including overdraws). Mark arrow here. Correct Arrow Length 1" clearance (minimum) Place where arrow contacts most forward portion of the arrow rest. Correct Arrow Length is measured from the bottom of the nock groove to the end of the shaft for hunting arrows and target/field arrows shot from any bow. Determining Actual Peak Bow Actual peak bow weight for recurve bows (measured at your draw length) and compound bows can be determined at your local archery pro shop. Determining Calculated Peak Bow The suggested shaft sizes on the Beman Arrow Size-Selection Chart were determined using a standard setup, which includes: Use of a release aid 75-100 grain arrow point weight Compound bow with brace height greater than 6 ½" Tuning the Arrow Shaft Our Beman Arrow Size-Selection Chart indicates that more than one shaft size may shoot well from your bow. You may decide to shoot a lighter shaft for speed, or a heavier shaft for greater durability and penetration. Also, large variations in shooting style, bow efficiency, type of If your setup differs from the standard, use the variables listed below to make adjustments. Add or subtract the appropriate amounts to calculate the effective peak bow weight of your bow. Use this calculated peak bow weight to select your correct arrow size on the CHART. Variables to the standard setup: Finger release (using compound bow) add 5 lbs. Point weight over 100 grains add 3 lbs. Bows with brace height less than 6 ½ add 5 lbs. Using the Beman Arrow Size-Selection Charts 1. Once you have determined your Correct Arrow Length and Calculated Peak Bow, you are ready to select your correct shaft size: Compound bows- In the Bow column (left-hand side of the chart) select the column with the type cam on your bow. Then locate your Calculated Peak Bow in that column. Recurve bows- In the Bow column (right-hand side of the chart) locate your Actual Peak Bow at your draw length. 2. Move across that row horizontally to the column indicating your Correct Arrow Length. On the Beman Arrow Size-Selection Chart, note the letter in the box where your Calculated Peak Bow row and Correct Arrow Length column intersect. The Shaft Size box below the Chart with the same letter contains your recommended shaft sizes. Select a shaft from the Chart that best meets your shooting requirements. All Beman shafts use a spinedeflection number to determine size. wheels or cams, and type of release may require special bow tuning or a shaftsize change. Easton s Arrow Tuning and Maintenance Guide (available online at or call 801-539-1400) provides additional information on tuning. LIMITED WARRANTY The Beman arrow shaft limited warranty covers any defects in material and/or workmanship for one year from date of purchase. It does not cover damage caused by impact from another arrow, impact with hard objects, improper cleaning or fletching, or from normal wear. Warranty does not apply if damage results from any non-compliance of printed instructions. Arrow shafts that are defective will be replaced by your local dealer or by Beman. COMPOUND BOW Release Aid Calculated Peak Bow - Lbs. Medium Cam Single or Hard Cam 22.5 23" 23.5 23.5 24" 24.5 24.5 25" 25.5 25.5 26" 26.5 ARROW LENGTH 26.5 27" 27.5 27.5 28" 28.5 28.5 29" 29.5 29.5 30" 30.5 30.5 31" 31.5 31.5 32" 32.5 32.5 33" 33.5 RECURVE BOW - Lbs. Finger Release 27-31 22-26 A A B C D D E F G H I 22-26 32-36 27-31 A B C D D E F G H I J 27-31 37-41 32-36 B C D D E F G H I J J 32-36 42-46 37-41 C D D E F G H I J J K 37-41 47-51 42-46 D D E F G H I J J K L 42-46 52-56 47-51 D E F G H I J J K L M 47-51 57-61 52-56 E F G H I J J K L M N 52-56 62-66 57-61 F G H I J J K L M N N 57-61 67-72 62-66 G H I J J K L M N N N 62-66 73-78 67-72 H I J J K L M N N N 67-72 79-84 73-78 I J J K L M N N N 73-78 85-90 79-84 J J K L M N N N 79-84 91-96 85-90 J K L M N N N 85-90 Group A Group B Group C Group D 1000 1.000 Flash 5.6 162 900 0.900 Flash 6.4 186 750 0.750 Flash 6.2 180 750 0.750 Flash 6.2 180 780 0.780 Energy 6.3 183 690 0.690 Energy 6.3 183 Group E Group F Group G Group H 630 0.630 Flash 7.0 203 630 0.630 Flash 7.0 203 570 0.570 Flash 7.2 209 520 0.520 Energy 7.1 206 600 0.600 Energy 6.9 200 570 0.570 Flash 7.2 209 520 0.520 Energy 7.1 206 460 0.460 Energy 7.3 212 600 0.600 Energy 6.9 200 500 0.500 BlkMax 8.9 258 500 0.500 BlkMax 8.9 258 500 0.500 9.3 7.1 206 500 0.500 9.3 7.1 206 500 0.500 Max 4 9.7 281 500 0.500 Max 4 9.7 281 500 0.500 Classic 9.7 281 500 0.500 Classic 9.7 281 500 0.500 ICSH/V 7.3 212 500 0.500 ICSH/V 7.3 212 500 0.500 CAMO 8.0 232 500 0.500 CAMO 8.0 232 Group I Group J Group K Group L 460 0.460 Energy 7.3 212 460 0.460 Energy 7.3 212 410 0.410 Energy 7.6 220 360 0.360 Energy 8.3 241 500 0.500 BlkMax 8.9 258 410 0.410 Energy 7.6 220 400 0.400 BlkMax 9.6 278 340 0.340 BlkMax 10.4 302 500 0.500 9.3 7.1 206 400 0.400 BlkMax 9.6 278 400 0.400 9.3 7.8 226 340 0.340 9.3 8.3 241 500 0.500 Max 4 9.7 281 400 0.400 9.3 7.8 226 400 0.400 Max 4 10.4 302 340 0.340 Max 4 11.2 325 500 0.500 Classic 9.7 281 400 0.400 Max 4 10.4 302 400 0.400 Classic 10.4 302 340 0.340 Classic 11.2 325 500 0.500 ICSH/V 7.3 212 400 0.400 Classic 10.4 302 400 0.400 ICSH/V 8.4 244 340 0.340 ICSH/V 9.3 270 500 0.500 CAMO 8.0 232 400 0.400 ICSH/V 8.4 244 400 0.400 CAMO 9.1 264 340 0.340 CAMO 10.0 290 400 0.400 CAMO 9.1 264 Group M Group N Size Indicates suggested shaft sizes. Spine Spine of arrow size shown (static). Model Designates arrow model. Listed in grains per inch. 360 0.360 Energy 8.3 241 300 0.300 BlkMax 11.7 339 340 0.340 BlkMax 10.4 302 300 0.300 Max 4 12.5 363 340 0.340 9.3 8.3 241 300 0.300 ICSH/V 9.5 276 340 0.340 Max 4 11.2 325 300 0.300 CAMO 10.1 293 340 0.340 Classic 11.2 325 340 0.340 ICSH/V 9.3 270 340 0.340 CAMO 10.0 290 Flash Flash Energy ICS Energy BlkMax Black Max Elite MFX & Black Max MFX 9.3 Beman 9.3 Max 4 Max-4 MFX Classic Classic MFX ICSH/V ICS Hunter Elite, ICS Hunter and Venture CAMO ICS Camo Hunter 18 19

! WARNING FOLLOW THESE INSTRUCTIONS TO AVOID PERSONAL INJURY. SEE WARNINGS AND USE @ www.bsafe.ws or 877-INFO-ETP. Warnings and Use Shaft Preparation and Assembly ARROW BREAKAGE An arrow shaft can become damaged from impacts with hard objects or other arrows, or after being shot into a game animal. A damaged arrow could break upon release and injure you or a bystander. You must carefully inspect each arrow shaft, nock and other components before each shot to see that they have not been damaged. Before shooting, place the arrow between your thumb and fingers, and using your other hand to slowly rotate the shaft, run your fingertips along the entire arrow length, feeling and looking closely for nicks, cracks, splits, dents, or other marks that could indicate the shaft has been damaged. 1. Grasp the shaft just above the point and below the nock, then flex the arrow in an arc (bending it away from you and others) with a deflection of one to two inches (2.5 to 5 cm), and listen for cracking noises. Perform this test four to six times, rotating the arrow slightly between each flex until you have gone around the entire arrow. If you hear or feel cracking, the carbon has been damaged. 2. While still holding the point and fletching ends, twist the shaft in both directions. If the arrow relaxes or twists easily, the carbon has been damaged. If an arrow has been damaged, or if you believe it has been damaged, do not shoot it again, as it could break on release, and sharp arrow pieces could hit and injure you or someone nearby. BOWHUNTING PRECAUTIONS Carbon arrows may be used for hunting if special precautions are taken. Carbon arrow shafts used in bowhunting could break after being shot into a big game animal. This arrow breakage may be caused by the angle in which the arrow impacts the animal, or by the reaction of the animal itself such as rolling on the shaft or hitting against a tree. The break may be inside the animal and may not be immediately obvious after recovery of the animal. When a carbon arrow breaks, it tends to shatter with the resulting creation of many sharp, splinter-like fragments. These fragments can be harmful to humans if ingested; therefore, when game is recovered, the hunter should always carefully determine whether the arrow has broken inside the animal. If the arrow has broken, follow the instructions below: 1. Use extreme caution when removing broken segments of the carbon arrow shaft. 2. Use care to avoid splinters of carbon fiber when field dressing game animals. 3. Carefully remove the flesh in the area of the wounds. It may contain carbon fiber, particularly at the entry and exit points. 4. Thoroughly clean the surrounding area of the wound and inspect for the presence of carbon fragments. 5. Carefully dispose of any meat that might contain carbon splinters. Do not leave for scavengers to eat. SHAFT Preparation Cut shafts to length using only a high-speed abrasive wheel cut-off tool designated for arrow shafts. Never use rotary tube cutters, hacksaws or methods that can damage the shaft and leave a rough cut. Chamfer lightly the inside of the shaft, just enough to remove any burrs. Clean thoroughly the inside of the shaft with a cotton swab wetted with 91 to 99 percent isopropyl alcohol (not rubbing alcohol, which can contain oil). CAUTION: Always wear a NIOSH-approved dust mask and safety glasses when cutting any arrow shafts. Be sure to use a dust collector to vacuum up all of the dust when cutting arrow shafts. FOR C2 CARBON SHAFTS: EPOXY INSTALLATION OF COMPONENTS OR FOR INSTALLATION OF COMPOSITE INSERTS IN ALL TYPES OF SHAFT MATERIAL. 1. Easton or AAE brand epoxy or 3M DP390 24-hour cure flexible two-part epoxies are recommended. 2. Apply a small ring of adhesive, just inside the end of the shaft and a generous coating on the entire shank of the point or insert. 3. Slowly twist the point or insert into shaft and seat it against end of shaft. 4. Wipe off any excess adhesive with a cloth or paper towel. 5. Stand the shaft vertically on the point or insert to cure. Be sure epoxy does not flow into insert threads. 6. This is a permanent installation. Inserts cannot be removed without damaging the shaft. CARBON SHAFTS UNI BUSHING INSTALLATION 1. AAE Fastset or other gel-type cyanoacrylate cements are recommended. 2. Apply a thin ring of adhesive completely around the inside diameter of the shaft within 1 16" from the open end. 3. Insert UNI Bushing and quickly seat against end of shaft. 4. Stand shaft with UNI Bushing upright. HIT INSERT COMPONENTS See shaft preparation and assembly instructions packaged with HIT equipped models. Use Easton brand HIT 24-hour epoxy or Quick HIT 15-minute adhesive. Other adhesives not recommended and will void warranty. 5040 Harold Gatty Drive, Salt Lake City, Utah 84116-2897 (801) 539-1400 Fax (801) 539-0139 Every effort has been made to ensure the accuracy of this catalog. Graphics and images are for illustration purposes only. Due to our continual effort to improve our products, Beman reserves the right to make changes without notice. 20 21

Join Us Each Week Archer s Choice is more than just a TV show. It s about Ralph and Vicki sharing their exciting adventures with us. Whether they are chasing whitetails, waiting for bears, or calling giant moose, Beman Archer s Choice is the home for real bowhunting action. Catch America s Favorite Bowhunting Couple on the Outdoor Channel. Ralph Cianciarulo Archer s Choice Television Vicki Cianciarulo Archer s Choice Television 22 23 For limited-edition giclee art prints of the paintings in this catalog go to www.corsetti.com.