PRESSURE REDUCTION FLOWMETERING, QUICK COUPLING PROBES AND ACCESSORIES 1
3 1 - ALPINOX: oxygen Regulator - Medical oxygen regulator with flowmeter. - Medical oxygen regulator with flowmeter and Quick release connector - Medical oxygen regulator with Quick release connector, no flowmeter. - Medical oxygen regulator with column flowmeter. - Options equipment Alpinox 2 - ALPINOX FLOWMETER 2.1 - ALPINOX FLOWMETER: calibrated orifice - Flowmeter calibrated orifice NFS 90-116 - Flowmeter calibrated orifice DIN 13260-2 - Flowmeter calibrated orifice BS 5682 - Flowmeter calibrated orifice SS8752430 2.2 - ALPINOX FLOWMETER: fine flow valve - Needle valve with hose barb removable DIN 13260-2 - Needle valve with hose barb removable NFS 90-116 3 - ALPICLICK: quick coupling probe male and female - Quick coupling probe male and female DIN 13260-2 - Quick coupling probe male and female BS5682 - Quick coupling probe male and female SS8752430 - Quick coupling probe male and female NFS 90-116 - Quick coupling probe male and 2 female DIN 13260-2 - Quick coupling probe male and 2 female NFS 90-116 - Quick coupling probe male and columns 4 - Accessories - Bubbler humidifier with hose barb connector - Column flowmeter - Hose barb
4 ALPINOX Regulator for hospital and home care oxygen therapy The ALPINOX is a new generation of medical regulator with high flow precision and continuous flow between settings. The regulator is in compliance with EN ISO 10524-1 TM SPECIFICATIONS Gas Max pressure Gauge Filter Flow range Material: - Body white coated brass - O-Ring EPDM - Seat Nylon Regulatory status CE marking Medical oxygen, Air 200 bar 0-315 bar, 0-4500 psi 20 micron, sintered bronze 0-1/2-1-2-3-4-5-6-7-9-12-15 Lpm (EU) 0-1/4-1/2-1-2-3-4-6-8-12-15-25 Lpm (USA) Complies with medical devices directive 93/42/EEC and EN ISO 10524 CE0029 ALPINOX New generation Medical Regulator: - Single stage piston regulator ensuring high life cycle. - Preset integrated pressure relief valve. - Flowmeter with stop at 0. - Easy to clean - High precision flow from 0.25 lpm to 25 lpm. - Continuous flow from 0 to maximal flow. - Integrated safety relief device protected and none accessible. - Ergonomic handwheel and modern design. Red dot design award - Easily cleanable. - Rubber protection on the gauge. - Plastic protection on the regulator. - Ergonomic plastic hand-wheel on the inlet connection. - Position 25 lpm intended for the nebulization - 20μm Filter inside the seat regulator - Design free of fluorinated polymers whose combustion products are toxic. - Individual number for traceability. OPTIONS Flow range 0-1/4-1/2-3/4-1-1 1/2-2 1/2-3-4-5-6 Lpm Flow range 0-1/2-1-2-3-4-6-8-10-12-15-25 Lpm Lateral marking
5 Medical oxygen regulator with flowmeter and manometer for Germany / Switzerland / Austria Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000037 200 bar DIN 477-1 N 9 4,5 bar M73000039 200 bar DIN 477-1 N 9 4,5 bar M73000040 200 bar DIN 477-1 N 9 4,5 bar Medical oxygen regulator with flowmeter and manometer for Belgium Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000052 200 bar NBN 226 G5/8 4,5 bar M73000054 200 bar NBN 226 G5/8 4,5 bar M73000051 200 bar NBN 226 G3/4 4,5 bar Medical oxygen regulator with flowmeter and manometer for Spain Outlet Flowrate Hosebarb Lateral Marking O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000068 200 bar MIETipo F 4,5 bar M73000069 200 bar MIETipo F 4,5 bar M73000065 200 bar MIETipo F 4,5 bar M73000066 200 bar MIETipo F 4,5 bar Medical oxygen regulator with flowmeter and manometer for France Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M12x1,25 M73000025 200 bar Typ F acc" Afnor 4,5 bar M73000031 200 bar Typ F acc" Afnor 4,5 bar
6 Medical oxygen regulator with flowmeter and manometer for Italy Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 G1/4" M73000047 200 bar UNI 11144 N 2 4,5 bar Medical oxygen regulator with flowmeter and manometer for Korea Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000021 200 bar JIS 8246 Typ B 4,5 bar Medical oxygen regulator with flowmeter and manometer for UK / Australia Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000050 200 bar BS341 N 3 4,5 bar Medical oxygen regulator with flowmeter and manometer for Scandinavia Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000053 200 bar SFS 2294-A2 4,5 bar M73000055 200 bar SFS 2294-A2 4,5 bar M73000074 200 bar SFS 2321-C1 4,5 bar
7 Medical oxygen regulator with flowmeter and manometer for China Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000076 200 bar GB15383 N 4 4,5 bar Medical oxygen regulator with flowmeter and manometer for Netherlands Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16" M73000030 200 bar RI2 acc NEN3268 4,5 bar
8 ALPINOX Pin Index regulator for hospital and home care oxygen therapy The ALPINOX is a new generation of medical regulator with high flow precision and continuous flow between settings. The regulator is in compliance with EN ISO 10524-1 TM SPECIFICATIONS Gas Max pressure Gauge Filter Flow range Material: - Body white coated brass - O-Ring EPDM - Seat Nylon Regulatory status CE marking Medical oxygen, Air 200 bar 0-315 bar, 0-4500 psi 20 micron, sintered bronze 0-1/2-1-2-3-4-5-6-7-9-12-15 Lpm (EU) 0-1/4-1/2-1-2-3-4-6-8-12-15-25 Lpm (USA) Complies with medical devices directive 93/42/EEC and EN ISO 10524 CE0029 ALPINOX New generation Medical Regulator: - Single stage piston regulator ensuring high life cycle. - Preset integrated pressure relief valve. - Flowmeter with stop at 0. - Easy to clean - High precision flow from 0.25 lpm to 25 lpm. - Continuous flow from 0 to maximal flow. - Integrated safety relief device protected and none accessible. - Ergonomic handwheel and modern design. Red dot design award - Easily cleanable. - Rubber protection on the gauge. - Plastic protection on the regulator. - Ergonomic plastic hand-wheel on the inlet connection. - Position 25 lpm intended for the nebulization - 20μm Filter inside the seat regulator - Design free of fluorinated polymers whose combustion products are toxic. - Individual number for traceability. OPTIONS Flow range 0-1/4-1/2-3/4-1-1 1/2-2 1/2-3-4-5-6 Lpm Flow range 0-1/2-1-2-3-4-6-8-10-12-15-25 Lpm
9 Pin Index medical oxygen regulator with flowmeter and manometer for USA Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000014 2000 PSI CGA 870 50 PSI Pin Index medical oxygen regulator with flowmeter and manometer for Europe Outlet Flowrate Hosebarb O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M12x1,25 9/16 UNF G 1/4 M73000011 200 bar ISO 407 4,5 bar M73000032 200 bar ISO 407 4,5 bar M73000027 200 bar ISO 407 4,5 bar M73000033 200 bar ISO 407 4,5 bar M73000043 200 bar ISO 407 4,5 bar M73000045 200 bar ISO 407 4,5 bar M73000046 200 bar ISO 407 4,5 bar M73000048 200 bar ISO 407 4,5 bar
10 ALPINOX Regulator with quick release connector for hospital and home care oxygen therapy The ALPINOX is a new generation of medical regulator with high flow precision and continuous flow between settings. The regulator is in compliance with EN ISO 10524-1 TM SPECIFICATIONS Gas Max pressure Gauge Filter Flow range Material: - Body white coated brass - O-Ring EPDM - Seat Nylon Regulatory status CE marking Medical oxygen, Air 200 bar 0-315 bar, 0-4500 psi 20 micron, sintered bronze 0-1/2-1-2-3-4-5-6-7-9-12-15 Lpm (EU) 0-1/4-1/2-1-2-3-4-6-8-12-15-25 Lpm (USA) Complies with medical devices directive 93/42/EEC and EN ISO 10524 CE0029 ALPINOX New generation Medical Regulator: - Single stage piston regulator ensuring high life cycle. - Preset integrated pressure relief valve. - Flowmeter with stop at 0. - Easy to clean - High precision flow from 0.25 lpm to 25 lpm. - Continuous flow from 0 to maximal flow. - Integrated safety relief device protected and none accessible. - Ergonomic handwheel and modern design. Red dot design award - Easily cleanable. - Rubber protection on the gauge. - Plastic protection on the regulator. - Ergonomic plastic hand-wheel on the inlet connection. - Position 25 lpm intended for the nebulization - 20μm Filter inside the seat regulator - Design free of fluorinated polymers whose combustion products are toxic. - Individual number for traceability. OPTIONS Flow range 0-25 Lpm Flow range 0-6 Lpm
11 Medical oxygen regulator with flowmeter, manometer and quick connector: - for Germany / Switzerland Outlet Flowrate Hosebarb Quick connector O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000038 200 bar DIN 477-1 N 9 4,5 bar DIN 13260 M73000041 200 bar DIN 477-1 N 9 4,5 bar DIN 13260 - for Belgium Outlet Flowrate Hosebarb Quick connector O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000057 200 bar NBN 226 G5/8 4,5 bar DIN 13260 M73000058 200 bar NBN 226 G5/8 4,5 bar AFNOR NF S90-116 M73000059 200 bar NBN 226 G3/4 4,5 bar AFNOR NF S90-116 - for Spain Outlet Flowrate Hosebarb Lateral Marking Quick Connector O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000060 200 bar MIETipo F 4,5 bar AFNOR NF S90-116 M73000061 200 bar MIETipo F 4,5 bar AFNOR NF S90-116 M73000062 200 bar MIETipo F 4,5 bar AFNOR NF S90-116 M73000063 200 bar MIETipo F 4,5 bar AFNOR NF S90-116 - for Netherlands Outlet Flowrate Hosebarb Quick Connector O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard 9/16 UNF M73000064 200 bar NEN3268 RI2 G5/8 4,5 bar DIN 13260 - for Scandinavia Outlet Flowrate Hosebarb Quick Connector O2 Air Pressure Connection Pressure 0-6 0-15 0-25 Standard M73000022 200 bar SFS 2294-A2 4,5 bar SS8752430 M73000026 200 bar SFS 2294-A2 4,5 bar SS8752430 M73000029 200 bar SFS 2321-C1 4,5 bar SS8752430 - for France Outlet Flowrate Hosebarb Quick Connector O2 Air N2O/O2 Pressure Connection Pressure 0-6 0-15 0-25 Standard M12x1,25 M73000044 200 bar Typ F acc Afnor 4,5 bar AFNOR NF S90-116 M73000056 170 bar Typ L acc Afnor 4,5 bar AFNOR NF S90-116
12 ALPINOX TM Regulator for hospital and home care oxygen therapy without flowmeter with quick coupling probes The regulator is in compliance with EN ISO 10524-1 SPECIFICATIONS Gas Medical oxygen, Air Max pressure 200 bar Gauge 0-315 bar, 0-4500 psi Filter 20 micron, sintered bronze Material: - Body white coated brass - O-Ring EPDM - Seat Nylon Regulatory status Complies with medical devices directive 93/42/EEC and EN ISO 10524 CE marking CE0029 ALPINOX New generation Medical Regulator: - Single stage piston regulator ensuring high life cycle. - Easy to clean - Integrated safety relief device protected and none accessible. - Rubber protection on the gauge. - Plastic protection on the regulator. - 20μm Filter inside the seat regulator - Design free of fluorinated polymers whose combustion products are toxic. - Individual number for traceability.
13 Medical oxygen regulator with manometer for Germany / Switzerland / Austria Outlet Quick connector O2 Air Pressure Connection Pressure M73000034 200 bar DIN 477-1 N 9 4,5 bar DIN 13260 Medical oxygen regulator with manometer for Scandinavia Outlet Quick Connector O2 Air Pressure Connection Pressure M73000036 200 bar SFS 2321-C1 4,5 bar SS8752430 M73000071 200 bar SFS 2294-A2 4,5 bar SS8752430 Medical oxygen regulator with manometer for France Outlet Quick Connector O2 Air Pressure Connection Pressure M73000078 200 bar Typ F acc. Afnor 4,5 bar AFNOR NF S 90-116 Medical oxygen regulator with manometer for Belgium Outlet Quick Connector O2 Air Pressure Connection Pressure M73000072 200 bar NBN 226 G5/8 4,5 bar AFNOR NF S 90-116 M73000073 200 bar NBN 226 G5/8 4,5 bar DIN 13260
14 ALPINOX TM Regulator for hospital and home care oxygen therapy with column flometer The regulator is in compliance with EN ISO 10524-1 SPECIFICATIONS Gas Medical oxygen, Air Max pressure 200 bar Gauge 0-315 bar, 0-4500 psi Filter 20 micron, sintered bronze Flow Range 0-15 Lpm Material: - Body white coated brass - O-Ring EPDM - Seat Nylon Regulatory status Complies with medical devices directive 93/42/EEC and EN ISO 10524 CE marking CE0029 ALPINOX New generation Medical Regulator: - Single stage piston regulator ensuring high life cycle. - Easy to clean - Integrated safety relief device protected and none accessible. - Rubber protection on the gauge. - Plastic protection on the regulator. - 20μm Filter inside the seat regulator - Design free of fluorinated polymers whose combustion products are toxic. - Individual number for traceability.
15 Medical oxygen regulator with column for Germany / Switzerland / Austria Outlet Hose barb O2 Air Pressure Connection Pressure Flowrate M73000035 200 bar DIN 477-1 N 9 4,5 bar 0-15 Lpm Medical oxygen regulator with column for Belgium Outlet Hose barb O2 Air Pressure Connection Pressure Flowrate M73000049 200 bar NBN 226 G5/8 4,5 bar 0-15 Lpm Medical oxygen regulator with column for France Outlet Hose barb O2 Air Pressure Connection Pressure Flowrate M73000023 200 bar Typ F acc. Afnor 4,5 bar 0-15 Lpm Medical oxygen regulator with column for Netherlands Outlet Hose barb O2 Air Pressure Connection Pressure Flowrate M73000024 200 bar NEN3268 RI2 G5/8 4,5 bar 0-15 Lpm Medical oxygen regulator with column for Italy Outlet Hose barb O2 Air Pressure Connection Pressure Flowrate M73000070 200 bar UNI 11144 N 2 4,5 bar 0-15 Lpm
16 ALPINOX Flowmeter calibrated orifice Flow-meter for hospital and ambulance oxygen therapy The ALPIFLOW is a new generation of medical flow-meter with high flow precision and continuous flow between settings. The flow-meter is in compliance with the EN ISO 15002 KEY FEATURES ALPINOX Flowmeter is a flow meter with calibrated flow for all medical gases. Flow-meter for hospital oxygen therapy Continuous flow between settings Stop at 0 pressure : 4 bar 0/+1 bar Flow precision acc. EN ISO 15002 Flow range: 0-15 lpm (12 positions) New generation ALPINOX Flowmeter Medical Flowmeter: High flow precision from 0.1 lpm to 25 lpm. Continuous flow from 0 to maximal flow. Ergonomic and modern design.. Easily cleanable. Plastic protection on the flowmeter. Position 25 lpm intended for the nebulization Swiveling design 360 for optimal readability. Design free of fluorinated polymers whose combustion products are toxic. 360
17 Flowmeter calibrated orifice with inlet connector NFS 90-116 Reference Gas Flow rate (Lpm) Hose barb O2 Air N2O/O2 0-6 0-15 0-25 M12x1,25 9/16 UNF 1/4 ISO M73010002 M73010001 M73010000 M73010003 M73010004 M73010005 M73010012 M73010015 M73010016 M73010017 M73010018 M73010020 Flowmeter calibrated orifice with inlet connector DIN 13260-2 Reference Gas Flow rate (Lpm) Hose barb O2 Air N2O/O2 0-6 0-15 0-25 M12x1,25 9/16 UNF 1/4 ISO M73010009 M73010007 M73010006 M73010008 Flowmeter calibrated orifice with inlet connector BS 5682 Reference Gas Flow rate (Lpm) Hose barb O2 Air N2O/O2 0-6 0-15 0-25 standard M73010010 M73010011 M73010013 M73010014 Flowmeter calibrated orifice with inlet connector SS8752430 Reference Gas Flow rate (Lpm) Hose barb O2 Air N2O/O2 0-6 0-15 0-25 standard M73010021 M73010022 M73010023 M73010024
18 ALPINOX Flowmeter fine flow valve Reduce and increase the compressed air/oxygen in the range from zero to maximum gas flow. Input pressure is 500kPa with the difference of +/- 50kPa. For short-term operation in combination with a drug nebulizer and in oxygen therapy. Installation directly at the extraction point, at equipment mounts Needle valve with hose barbe removable DIN 13260-2 Needle valve with hose barbe removable NFS 90-116 360
19 Needle valve Hosebarb O2 Air Pressure Connection M12x1,25 9/16" M41500003 500kPa NFS 90-116 M41500203 500kPa NFS 90-116 M41501004 500kPa DIN13260-2 M41501204 500kPa DIN13260-2
20 ALPICLICK Connectors for medical gas pipeline distribution system The connectors for medical gas pipeline system are devices used to connect or disconnect specific medical devices for anesthesia, ventilation, oxygen therapy or various medical therapies. The connectors are designed and approved in accordance with the following standards: NF S 90-116, DIN 13260-2, SS 8752430, EN737-6. SPECIFICATIONS: Gas Oxygen, Air, 50%N2O/50%O2. Materials Brass chrome plated, EPDM, Nylon. CE marking CE 0029 ADVANTAGES: - Swiveling design 360 for optimal use. - Design free of fluorinated polymers whose combustion products are toxic. Outlet O2 Air N2O/O2 NFS 90-116 DIN 13260-2 BS 5682 GB SS 8752430 Nordic Czech Nipple M69010002 M69010202 M69010102 M69011002 M69011202 M69013002 M69013202 M69013102 M69012002 M69012202 M69012102 M69015002
21 DIN 13260-2 O2 Air M69011002 M69011202 BS5682 O2 Air N20/02 M69012002 M69012202 M69012102 SS8752430 O2 Air N20/02 M69013002 M69013202 M69012102 NFS 90-116 O2 Air N20/02 M69010002 M69010202 M69010102
22 ALPICLICK DUO Y Connectors for medical gas pipeline distribution system The Y connectors for medical gas pipeline system are devices used to connect or disconnect two specific medical devices for anesthesia, ventilation, oxygen therapy or various medical therapies. The connectors are designed and approved in accordance with the following standards: NF S 90-116, DIN 13260-2, SS 8752430, EN737-6. SPECIFICATIONS: Gas Oxygen, Air, 50%N2O/50%O2. Materials Brass chrome plated, EPDM, Nylon. CE marking CE 0029 ADVANTAGES: - Swiveling design 360 for optimal use. - Design free of fluorinated polymers whose combustion products are toxic.
23 DIN 13260-2 Air AFNOR O2 M69021299 M69020099 Outlet O2 Air N2O/O2 NFS 90-116 DIN 13260-2 SS 8752430 Nordic BS 5682 GB 2x M69020099 M69020199 M69020299 M69021099 M69021299 M69023099 M69023199 M69023299 M69022099 M69022199
24 ALPICLICK Terminal units Terminal units for medical gas pipeline distribution system The terminal units for medical gas pipeline system are devices used to connect or disconnect specific medical devices for anesthesia, ventilation, oxygen therapy or various medical therapies. The connectors are designed and approved in accordance with the EN ISO 9170-1 SPECIFICATIONS: Gas Oxygen, Air, 50%N2O/50%O2. Materials Brass chrome plated, EPDM, Nylon. CE marking CE 0029 ADVANTAGES: - Swiveling design 360 for optimal use. - Design free of fluorinated polymers whose combustion products are toxic. Outlet O2 Air N2O/O2 NFS 90-116 DIN 13260-2 SS 8752430 Nordic DISS USA Czech G3/8" 1/4 NPT M69000000 M69000200 M69000100 M69001000 M69001200 M69003000 M69003200 M69003100 M69004005 M69005000
25 DIN 13260-2 O2 Air M6901000 M69001200 SS8752430 O2 Air N20/02 M69003000 M69003200 M69003100 NFS 90-116 O2 Air N20/02 M69000000 M690000200 M690000100 DISS O2 M69004005
26 Accessories: Oxygen Therapy Humidifiers The bubbling humidifiers for oxygen therapy are devices allowing to increase the relative humidity of the oxygen supplied to the patient. Used both for hospital and home care therapy. Specifications: Bubbling humidifiers are manufactured in polycarbonate with chrome plated brass nipples and are autoclavable at 121 C-15 mn Inner volume 200 ml 300 ml 500 ml Sizes 200x74x55 mm 175x84x70 mm 207x84x70 mm Weight 0.115kg 0.155 kg 0.160 kg Max applicable value 500 kpa Max.aplicable flow value 20 Lpm connection ¼ ISO 3253 F, 3/8 ISO 3243 F M12X1.25F, 9/16 UNF F Outlet connection hose connector diam 6-9 mm Reference Thread 200ml 300ml 500ml 059900430 9-16 UNF 059900428 M12x1,25 059900429 1-4"ISO 059900433 9-16 UNF 059900431 M12x1,25 059900432 1-4"ISO 059900436 9-16 UNF 059900434 M12x1,25 059900435 1-4"ISO Option: PSF if higher sterilization temperatures are required (134 C-18 mn)
27 Accessories: Column flowmeter These flow meters are variable area instant flow measuring devices particularly suitable for measuring dosage of medical gases.they can be supplied as single unit or twin units,making possible two independent supplies from one source. Options: The flow meter is available with ALPICLICK or ALPICLICK Duo. Specifications: Needle valve with gas-specificity marked and colored adjusting knob and has a chrome plated brass body. The measuring tube is made of polycarbonate making suitable for heavy duty applications. Sizes (HxWxD): 136x33x82 mm Weight 0.230 kg Supply max.pressure 600 kpa Gas O2 AIR N2 CO2 N2O Flow range 0-15 lpm Accuraccy +/- 10% read value or +/-0.5 lpm if greater connection ¼ ISO 3253 F, 3/8 ISO 3243 F, 1/8 ISO 3243 F M12X1 F, 1/4 NPT Outlet connection ¼ ISO 3253 F, 3/8 ISO 3243 F, M12X1.25M, 9/16 UNF F, 1/2 GAS M,1/2 BSF F Accessories: Removable Hose Barb Removable hose barb for ALPINOX and ALPINOX Flowmeter Specifications: Material: Thread chrome plated brass M12x1,25 9/16 UNF G1/4 Reference Thread Quantity Nut Nipple Gasket 059900411 9-16 UNF 10 059900412 M12x1,25 10 059900413 G1/4 10
CEODEUX S.A. brandname: MEDITEC 24 rue de Diekirch, B.P.19, L-7505 Lintgen, Luxembourg Tel: +352 32 78 32, Fax :+352 32 78 32 854 e-mail: info@meditec.rotarex.com www.rotarex.com