Terminal blocks Terminal blocks E-loks... 4 Multipolar terminal strips... 49 Protected distribution terminals E-Rail... 50 Preinsulated terminals Preinsulated copper terminals... 53 Preinsulated end-sleeve terminals... 5 Twin insulated terminals... 54 Insulated terminals assortment in box... 55 opper terminals... 5 Insulated crimping terminals Rings... 58 Pin terminals... 58 Forks... 59 utt connectors... 0 End connectors... 0 Nylon rapid connectors... 0 Push-on terminals... Heat shrinkable butt connectors... 3 opper lugs opper lugs... 4 utt copper tube terminals...
TERMIN OKS // TERMIN OKS E-OKS Unipolar terminal blocks in transparent polycarbonate, ideal for the connection of cables in civil and industrial installations. TEHNI DT Material of insulating body: transparent polycarbonate. Internal pieces and bases of polyamide. Material of inserts: brass. Material of screws: zinc-plated steel. Working temperature: -5 85. Heat resistance: 30. Flammability rating: U94 class V. PPROVS/ERTIFITIONS ccording to the norm: EN 0998-:004. EN 0998--:004. EN 0998--:004. PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Easy separation of the pieces without rests of material on the external surface of the product. Optimal and safe connection thanks to the increased size of the insulating body of the terminal block and screws. 4 - Elematic abling Systems
D Unipolar terminal blocks - hole ode Nominal (mm²) ES 5,5 0 ES 5,5 0 ES 40 4 0 ES 0 0 ES 00 0 0 ES 0 5 ES 50 5 ES 350 35 N Poles onnectable cables (mm),5,5,5 4,5 4 0 0 5 0 35 5 0 POES 5 POES POE Rated voltage Degree of protection Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs. -3-3 -3-3 -3-3 -4-3 -4-3 -4-3 -3-3 - -3-3 -3 450 IP0 5 9 3, 5 450 450 IP0 0 8 0 4 5 450 450 IP0 0 4,5 5 450 450 IP0 5 5 450 500 IP0 9 4 7,5 0 300 500 IP00 35 3 9 9,5 0 40 500 IP00 39 40 5 50 500 IP00 4 43 4 4 5 50 D Unipolar terminal blocks - holes ode Nominal (mm²) ES /5,5 ES /0 ES /0 ES /50 5 ES /350 35 N Holes onnectable cables (mm),5 0,75 4,5 0 4 5 0 35 5 0 Rated voltage Degree of protection Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs. - - - - - The ES /50 and ES /350 terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES 500 - - - 450 IP0 5 3, 50.700 450 IP0 0 9 4 0 00 500 IP00 5 5 0 00 500 IP00 9 7 5 7,5 0 300 500 IP00 3 3 3 9,5 5 50 Elematic abling Systems - 47
D Unipolar terminal blocks - 3 holes ode Nominal (mm²) ES 3/0 3 ES 3/0 3 ES 3/50 5 3 N Holes onnectable cables (mm) 4,5 0 4 5 0 Rated voltage Degree of protection ll the terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES 500 Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs. - - - - - - - - - - 450 IP0 5 3 30 4,5 0 300 500 IP0 5 34 5 50 500 IP0 33 30 40 7,5 5 50 D Unipolar terminal blocks - 5 holes ode Nominal (mm²) ES 5/0 5 ES 5/0 5 ES 5/50 5 5 N Holes onnectable cables (mm) 4,5 0 4 5 0 Rated voltage Degree of protection ll the terminal blocks are suitable for installations on mounting rail DIN EN 500 with art. ES 500 Dimensions (mm) Pack arton rigid N. flexible N. V D pcs. pcs. - - - - - - - - - - 450 IP0 3 3 45 4,5 0 300 500 IP0 8 5 5 50 500 IP0 33 30 7,5 5 50 Support for mounting rail DIN ode Description Pack arton pcs. pcs. ES 500 Support for the installation of unipolar terminal blocks -3-5 holes on mounting rail DIN EN 50.0 0 40 48 - Elematic abling Systems
TERMIN OKS // MUTIPOR TERMIN STRIPS Multipolar terminal strips with screw, in polyethylene or in neutral polyamide, tested for working temperatures till 0. TEHNI DT Material of insulating body: Material of inserts: Material of screws: Working temperature: Flammability rating: U94 class V. Halogen-free. neutral polyethylene (line PE). Neutral polyamide (line P). brass (line PE). Nickel-plated brass (line P). zinc-plated steel. -5 85 (line PE); -30 0 (line P); max short period 50 (line P). PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Joints of cables. PPROVS/ERTIFITIONS ccording to the norm: EN 0998--:004 (line PE). EN 0998--:004; EN 0998-+:00 (line P). F Multipolar terminal strips in neutral polyethylene - line PE ode Nominal N Poles Flexible/Rigid connectable cables Rated voltage Nominal current Degree of protection Dimensions (mm) Pack arton (mm²) (mm²) (V) () D ØE ØF Screw pcs. pcs. EMPP5,5,5/4 450 - IP0 93,5 8,8,5 M,5 0 300 EMPP40 4 4/ 450 - IP0 9,5 0 3, 3 M3 0 00 EMPP0 /0 450 - IP0 30 7 4,3 3, M3,5 0 00 EMPP00 0 0/ 450 - IP0 5 0 4 5,8 4 M4 0 80 EMPP0 /5 450 - IP0 85 3 7 4 M5 0 0 Multipolar terminal strips in neutral polyamide - line P ode Nominal N Poles Flexible/Rigid connectable cables Rated voltage Nominal current Degree of protection Dimensions (mm) Pack arton (mm²) (mm²) (V) () D ØE ØF Screw pcs. pcs. EMP 5,5,5 450 7,5 IP0 94,5 5 8 3,8 M3 0 00 EMP 5,5,5 450 4 IP0 8 0 3, 3, M3 0 00 EMP 40 4 4 450 3 IP0 40 3 9 4 3,3 M3,5 0 0 EMP 00 0 0 450 57 IP00 7 3 5 5 3,4 M4 0 0 EMP 0 450 7 IP00 09 37 34 7 7,5 3,4 M5 0 30 Elematic abling Systems - 49
TERMIN OKS // PROTETED DISTRIUTION TERMINS E-RI Protected distribution terminal posts. TEHNI DT Insulation support: Inserts: Screws: Working temperature: Heat resistance: Fixing: cover of polycarbonate. ase of Polyamide. Self-extinguishing U94 V. brass. zinc-plated steel. -5 85. 30. on rail DIN EN 500 or with screws on plate. PPITIONS onnection and insulation of cables in civil and industrial installations. ENEFITS Possibility to connect more cables into the same polo. PPROVS/ERTIFITIONS ccording to the norm: EN 0998--:004 (00 and 5). EN 0998-:004 (00 and 5). Protected blue distribution terminal post - 50 ode I pk I cc I cw U imp V n N Poles k k k kv V RI 05007,9 8 750 RI 050,9 8 750 RI 0505,9 8 750 N Holes Ø (mm) ar onn. (mm²) 5 5,3 0 (rigid ) 9 5,3 0 (rigid ),5 3 5,3 0 (rigid ) onn. cables n. Dissipated power per bar (W) Dimensions (mm) Pack arton 5 85 pcs. pcs. 0,53 0,3 59 34 9 0 0 0,83 0,98 88 34 9 8 8,,3 4 34 9 0 0 Note: the protected distribution terminal post-50 can be used as expansion of the distribution terminal post-00 and 5 - four poles. 50 - Elematic abling Systems
Protected distribution terminal post - 00 (two poles and four poles) ode I pk I cc I cw U imp V n N Poles ar Dissipated power per bar (W) Dimensions (mm) Pack arton k k k kv V N Holes Ø (mm) onn. (mm²) onn. cables n. 5 85 pcs. pcs. RI 0007 0 0 3, 8 750 RI 00407 0 0 3, 8 750 4 9 8 5 9 8 5 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0,3,4 8 47 45 4 3,3,4 7 98 45 Note: these products can be fixed on rail DIN EN 500 or with screws on plate. Protected distribution terminal post - 5 (two poles and four poles) ode I pk I cc I cw U imp V n N Poles ar Dissipated power per bar (W) Dimensions (mm) Pack arton k k k kv V N Holes Ø (mm) onn. (mm²) onn. cables n. 5 85 pcs. pcs. RI 5 4,3 8 750 RI 54 4,3 8 750 4 RI 55 4,3 8 750 RI 545 4,3 8 750 4 9 8 7 9 8 7 9 8 9 8 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 0 /5/35 0//5,5 4//0 4, 4,85 05 47 45 0 4, 4,85 09 98 45 0 5,7,3 34 47 45 5,7,3 38 98 45 9 Note: these products can be fixed on rail DIN EN 500 or with screws on plate. Elematic abling Systems - 5
TERMINS // PREINSUTED // PREINSUTED OPPER TERMINS The preinsulated copper terminals create a perfect base of contact for the insertion of the cables into blocks, using a limited space. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: polypropylene. Self-extinguishing U94 V Halogen-free. Working temperature: -0 05. Installation temperature: 0 0. Max admissible point: 0 for short periods. Resistance to external agents: good resistance to bases and weak acids. imited resistance to strong oxidant acids, oils and minerals. No resistance to chloride solvents. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS High conductivity of the raw material. vailable in three colours: T, W and D. vailable in cutting strips 50 pcs. in the sect. 0,5-0,75 -,0 -,5 -,5 mm. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr. 5048. Preinsulated end-sleeve terminals - 50 pcs - cutting strips T (mm²) WG D S D S pcs. E0 0,50/N 0 4 8 0,5, 0,5 500 E05 0,75/N 8 4 8, 0,5,8 0,5 500 E09,00/N 8 4 8,4 0,5 3 0,5 500 E3,50/N 4 8,7 0,5 3,5 0,5 500 E,50/N 4 4 8, 0,5 4, 0,5 500 Tool for crimping end-sleeve terminals in strips, see cabling tools. INKED PRODUTS: Tools for terminals, see pages 98 5 - Elematic abling Systems
D D S S Preinsulated copper terminals - col. T/W/D ode ode T W D (mm²) WG D S D S pcs. E034 E34 0,5/N 4 0 0,75 0,5,8 0,5 500 E034 0,5/N 4 0 0,75 0,5,8 0,5 00 E035 E35 0,5/ 4 8 0,75 0,5,8 0,5 500 E03 E3 0,34/N 0 0,8 0,5 0,5 500 E03 0,34/N 0 0,8 0,5 0,5 00 E037 E37 0,34/ 8 0,8 0,5 0,5 500 E0 E00 E0 0,50/K 0 0,5, 0,5 500 E0 E00 E0 0,50/N 0 4 8 0,5, 0,5 500 E0 0,50/N 0 4 8 0,5, 0,5 00 E03 E030 E03 0,50/H 0 0 0,5, 0,5 500 E04 E040 E004D 0,75/K 8, 0,5,8 0,5 500 E05 E050 E005D 0,75/N 8 4 8, 0,5,8 0,5 500 E05 0,75/N 8 4 8, 0,5,8 0,5 00 E0 E00 E00D 0,75/H 8 0, 0,5,8 0,5 500 E07 E070 0,75/ 8 8, 0,5,8 0,5 500 E08 E080 E08,00/K 8,4 0,5 3 0,5 500 E09 E090 E09,00/N 8 4 8,4 0,5 3 0,5 500 E09,00/N 8 4 8,4 0,5 3 0,5 00 E0 E00 E0,00/H 8 0,4 0,5 3 0,5 500 E E0 E,00/ 8 8,4 0,5 3 0,5 500 E3 E3 E3,50/N 4 8,7 0,5 3,5 0,5 500 E3,50/N 4 8,7 0,5 3,5 0,5 00 E4 E4 E4,50/H 0,7 0,5 3,5 0,5 500 E5 E5 E5,50/ 4 8,7 0,5 3,5 0,5 500 E E E,50/N 4 4 8, 0,5 4, 0,5 500 E,50/N 4 4 8, 0,5 4, 0,5 00 E7 E7 E7,50/H 4 8, 0,5 4, 0,5 500 E8 E8 E8,50/ 4 4 8, 0,5 4, 0,5 500 E9 E9 E9 4,00/N,5 0,8 0, 4,8 0,3 500 E9 4,00/N,5 0,8 0, 4,8 0,3 00 E0 E0 E0 4,00/H 9,5,8 0, 4,8 0,3 500 E E E 4,00/ 5,5 8,8 0, 4,8 0,3 500 E E E0D,00/N 0 0 3,5 0,,3 0,3 00 E3 E3 E03D,00/ 0 8 3,5 0,,3 0,3 00 E4 E4 E04D 0,00/N 8 4,5 0, 7, 0,4 00 E5 E5 E05D 0,00/ 8 8 8 4,5 0, 7, 0,4 00 E E E0D,00/N 4 5,8 0, 8,8 0,4 00 E7 E7 E07D,00/ 8 8 5,8 0, 8,8 0,4 00 E8 E8 E08D 5,00/N 4 30 7,3 0,, 0,4 50 E9 E9 E09D 5,00/ 4 3 7,3 0,, 0,4 50 E30 E30 E30 35,00/N 30 8,3 0,,7 0,4 50 E3 E3 E3 35,00/ 39 5 8,3 0,,7 0,4 50 E3 E3 E3 50,00/N 3 0 0,3 0,3 5 0,5 50 E33 50,00/ 40 5 0,3 0,3 5 0,5 50 Ferrule length: Short=K - Normal=N - Medium=H - ong = Elematic abling Systems - 53
TERMINS // PREINSUTED // TWIN INSUTED TERMINS Insertion of two cables into the same terminal. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: polypropylene. Self-extinguishing U94 V Halogen-free. Working temperature: -0 05. Installation temperature: 0 0. Max admissible point: 0 for short periods. Resistance to external agents: good resistance to bases and weak acids. imited resistance to strong oxidant acids, oils and minerals. Not resistant to chloride solvents. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS High conductivity of the raw material. Minimal operational space of the terminals in the block. llows the insertion of two cables into the same terminal. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr. 5048. TWIN insulated terminals D ode T T D D (mm²) D D D3 S S pcs. D S S D3 0300 0300 x0,50/n,4,5 4,7 5 8 0,5 0,5 500 03005T 03005 x0,75/n,7,8 5 5 8 0,5 0,5 500 0300T 0300 x0,75/h,7,8 5 7 0 0,5 0,5 500 03009 03009 x,00/n,95 3,4 5,4 5 8 0,5 0,3 500 0300 0300 x,00/h,95 3,4 5,4 7 0 0,5 0,3 500 0303 0303 x,50/n, 3,, 8 0,5 0,3 500 0304 0304 x,50/h, 3,, 0 0,5 0,3 500 030T 030 x,50/n,8 4, 7,8 8,5 0 0, 0,3 50 0307T 0307 x,50/h,8 4, 7,8,5 3 0, 0,3 50 0309T 0309 x4,00/n 3,7 4,9 8,8 3 0, 0,4 00 030T 030 x,00/n 4,8,9 0 4 0, 0,4 00 0304T 0304 x0,0/n,4 7, 3 4 0, 0,4 00 030T 030 x,0/n 8, 9, 8,4 30 4 0, 0,4 50 * The codes 0300-05-09-3- are available in 00 pcs bag, adding "" after the cod. Ferrule length: Normal=N - Medium=H INKED PRODUTS: Tools for terminals, see pages 98 54 - Elematic abling Systems
TERMINS // PREINSUTED // INSUTED TERMINS SSORTMENT IN OX Insulated terminals assortment in box, in many dimensions and colours. ox dimensions: diameter = 90mm; h = 45mm. PPROVS/ERTIFITIONS ccording, for colour and dimension, to the norm DIN 48/4. ertification S nr. 5048. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS The assortment of different sizes and colours allows you to find the suitable terminal for the wished installation. The practical box in PV is provided with separations for the easiest choice of the wished product. Preinsulated copper terminals cross- 0,5,5 mm² ode ode ode Section Pack T W D (mm²) pcs. 0,5 50 0,75 00 000 000 0300 00,5 00,5 50 Preinsulated copper terminals cross- 4 mm² ode ode ode Section Pack T W D (mm²) pcs. 4 50 0 000 000 0300 0 0 0 Twin insulated terminals 0,75,5 mm² ode ode ode Section Pack T W D (mm²) pcs. x 0,75 50 03005-03003 x 50 x,5 50 x,5 50 Twin insulated terminals 4 mm² ode ode ode Section Pack T W D (mm²) pcs. x4 0 0300-03004 x 0 x0 0 x 5 Elematic abling Systems - 55
TERMINS // PREINSUTED // OPPER TERMINS The copper terminals create a perfect base of contact for the insertion of the cables into blocks, using a limited space. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). PPROVS/ERTIFITIONS ccording to the norm: DIN 48/. PPITIONS Electrical wiring and connections in electric and electronics switchboards. ENEFITS The copper terminals create a perfect base of contact for the insertion of the cables into blocks. S D D OPPER terminals (mm²) WG D D S pcs. 0000 0,5 4 5 4, 0,8 0,5 500 000 0,5 0 5,3, 0,5 500 000 0,5 0 0 9,3, 0,5 500 000 0,75 8 5,3,,3 0,5 500 000 0,75 8 0 9,3,,3 0,5 500 0003 7 5,3,4,5 0,5 500 0003 7 0 9,3,4,5 0,5 500 0004,5 7,7,8 0,5 500 0004,5 0 9,7,8 0,5 500 0005,5 4 7 9, 3,4 0,5 500 0005,5 4 0 9, 3,4 0,5 500 000 4 9 8,8 4 0, 500 000 4,8 4 0, 500 0007 0 3,5 4,7 0, 00 0007 0 5 4 3,5 4,7 0, 00 0008 0 7 0,8 4,5 5,8 0, 00 0008 0 7 5 3,8 4,5 5,8 0, 00 00083 0 7 8,8 4,5 5,8 0, 00 0009 0,5 5,8 7,5 0, 00 0009 5 3,5 5,8 7,5 0, 00 00093 8,5 5,8 7,5 0, 00 000 5 3 5 3 7,3 9,5 0, 50 000 5 3 8 7,3 9,5 0, 50 00 35 8 8,3 0, 50 00 50 5 0,3 3 0,3 50 0,5 mm² cross not belonging to the norm DIN 48/ INKED PRODUTS: Tools for terminals, see pages 98 5 - Elematic abling Systems
TERMINS // INSUTED RIMPING TERMINS // INSUTED RIMPING TERMINS The insulated terminals are obtained by plates of copper undergoing a process of hot treatment and electrolytic tin plating. This process optimizes the maximum malleability of the material providing the easiest compression during the crimping operations. vailable with nylon insulation (Easy Entry system) e in PV (anti-vibration sleeve). PPITIONS The insulated crimping terminals are used for electrical connections. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%) obtained by plates of copper, undergoing a process of hot-treatment and of electrolytic tin plating. Insulation material: nylon (ESY ENTRY) for rings, forks, pins and end connectors. PV for butt connectors and piggy-backs Self-extinguishing U94 V Working temperature: nylon: up to 05. PV: up to 75. Halogen-free. ENEFITS The particular internal shape of the insulation (Easy Entry) enables the quickest and safest insertion of the cables. The internal anti-vibration sleeve (PV insulation) avoids the tear as well as the unthreading of the cable even in presence of particular vibrations. PPROVS/ERTIFITIONS ertifications: U file n E3449 and E34488. INKED PRODUTS: Tools for terminals, pages 98 Elematic abling Systems - 57
RING TERMINS in nylon D a a D D3 (mm²) WG D D D3 a a pcs. 034 0,5,5 4, 3, 5 0 00 035 0,5,5 4, 3,7 5 0 00 043 0,5,5 4, 4,3 8 7 5 0 00 050 0,5,5 4, 5,3 0 8 5 0 00 0 0,5,5 4,,5 0 5 0 00 080 0,5,5 4, 8,4 4 5 0 00 09 0,5,5 4, 0,5 8 4 5 0 00 03,5,5 4 4,8 3, 7 5 00 03,5,5 4 4,8 3,7 7 5 00 039,5,5 4 4,8 4,3 8 8 5 00 050,5,5 4 4,8 5,3 0 0 5 00 0,5,5 4 4,8,5 5 00 080,5,5 4 4,8 8,4 4 3 5 00 09,5,5 4 4,8 0,5 8 5 5 00 095,5,5 4 4,8 3 9 5 00 0440 4 0,4 4,3 8 0 00 0450 4 0,4 5,3 0 00 040 4 0,4,5 00 0480 4 0,4 8,4 4 5 00 049 4 0,4 0,5 8 7 00 0495 4 0,4 3 9 3 00 The code 0 is not U certified D a a D3 D PIN TERMINS in nylon (mm²) WG D D D3 a a pcs. 0 0,5,5 4,,9 0 5 0 00 05 0,5,5 4,,9 7 5 0 00 0,5,5 4 4,8,9 0 5 0 00 05,5,5 4 4,8,9 7 5 0 00 04 4 0,4,9 4 8 4 00 58 - Elematic abling Systems
D a a D3 D DE TERMINS in nylon (mm²) WG D D D3 a a pcs. 0509 0,5,5 4,,8 9 9 5 0 00 050 0,5,5 4,, 0 0,5 5 0 00 053 0,5,5 4,, 3 3 5 0 00 054 0,5,5 4, 3 4 4,5 5 0 00 058 0,5,5 4,, 8 8,5 5 0 00 009,5,5 4 4,8,8 9 9 5 00 00,5,5 4 4,8, 0 0,5 5 00 03,5,5 4 4,8, 3 3 5 00 08,5,5 4 4,8, 8 8,5 5 00 070 4 0,4,8 0 4 00 D D3 FORK TERMINS in nylon D a a (mm²) WG D D D3 a a pcs. 03 0,5,5 4, 3, 5 0 00 035 0,5,5 4, 3,7 5 0 00 040 0,5,5 4, 4,3,8 7 5 0 00 050 0,5,5 4, 5,3 0 8 5 0 00 00 0,5,5 4,,5 0 5 0 00 03,5,5 4 4,8 3, 7 5 00 040,5,5 4 4,8 3,7,8 8 5 00 04,5,5 4 4,8 4,3,8 8 5 00 050,5,5 4 4,8 5,3 0 0 5 00 0,5,5 4 4,8,5 5 00 0440 4 0,4 4,3 8 0 00 0450 4 0,4 5,3 0 00 040 4 0,4,5 00 0480 4 0,4 8,4 4 5 00 0490 4 0,4 0,5 8 7 00 D D3 FNGED FORKS terminals in nylon (mm²) WG D D D3 a a pcs. D a a 073 0,5,5 4, 3,7 7,3 5, 5 0 00 084,5,5 4 4,4 4,3 8 7,3 5 00 Elematic abling Systems - 59
d F UTT ONNETOR in PV (mm²) WG d F pcs. 040 0,5,5 5 4 00 050,5,5 4 5 4, 00 045 4 0 5,4 00 END ONNETORS in nylon (mm²) WG D d pcs. D d EDE- 0,5,5 7,8,5,4 8, 5 00 EDE-,5,5 4 9,3 3,3 3,5 0, 5,5 00 EDE-5 4 0,8 4,4 5,5 5,5 7 00 EDE-8 8 8 3,9 5,,5 7,3 9 00 RPID ONNETORS (polypropylene) (mm²) WG pcs. ESR 0,5,5 7,7,7 9,7 00 ES,5,5 4 7,7,7 9,7 00 ESG 4 0 9,8 3,9, 00 0 - Elematic abling Systems
D a a FEME PUSH-ON TERMINS in PV (mm²) WG D a a pcs. 38 0,5,5 4, 3, 0,5,4 8,5 5 0 00 39 0,5,5 4, 3, 0,8,4 8,5 5 0 00 350 0,5,5 4, 5 0,5 9 5 0 00 349 0,5,5 4, 5 0,8 9 5 0 00 33 0,5,5 4,, 0,8 7,9 0,8 5 0 00 E34488 38,5,5 4 4,8 3, 0,5,4 8,5 5 0 00 350,5,5 4 4,8 5 0,5 9 5 0 00 349,5,5 4 4,8 5 0,8 9 5 0 00 33,5,5 4 4,8, 0,8 7,9 0,8 5 0 00 343 4 0,4, 0,8 7,9 4,8 4 00 The codes 33-33-343 are U certified ME PUSH-ON TERMINS in PV D a a (mm²) WG D a a pcs. 308 0,5,5 4,,8 0,5, 7 5 0 00 3053 0,5,5 4, 4,8 0,8 7 9 5 0 00 303 0,5,5 4,,3 0,8 8 5 0 00 3053,5,5 4 4,8 4,8 0,8 7 9,5 5 0 00 303,5,5 4 4,8,3 0,8 8 5 0 00 E34488 3043 4 0,4,3 0,8 8 5 4 00 The codes 303-303-3043 are U certified E PIGGY-KS in PV D F a a (mm²) WG D E F a a pcs. 353 0,5,5 4,, 0,8 7,9,3 8 0,8 5 0 00 33,5,5 4 4,8, 0,8 7,9,3 8 0,8 5 00 343 4 0,4, 0,8 7,9,3 8 4,8 00 Elematic abling Systems -
TOTY INSUTED FEME PUSH-ON TERMINS in PV D a a (mm²) WG D a a pcs. 355 0,5,5 4, 3, 0,5,4 0 5 0 00 358 0,5,5 4, 3, 0,8,4 0 5 0 00 3548 0,5,5 4, 5 0,5,4,5 5 0 00 3553 0,5,5 4, 5 0,8,4,5 5 0 00 353 0,5,5 4,, 0,8 7,9 3,5 5 0 00 3548,5,5 4 4,8 5 0,5,4,5 5 00 E34488 3553,5,5 4 4,8 5 0,8,4,5 5 00 353,5,5 4 4,8, 0,8 7,9 3,5 5 00 3543 4 0,4, 0,8 7,9 4 00 The code 3543 is not U certified D a a TOTY INSUTED ME PUSH-ON TERMINS in nylon (mm²) WG D a a pcs. 33 0,5,5 4,3 0,8 8 3,4 5 0 00 33,5,5 4 4,5,3 0,8 8 3,4 5 00 343 4 0,5,3 0,8 8,5 00 ME UETS in PV (mm²) WG D a a pcs. D a a 4048 0,5,5 4 4 8,5 0,5 5 0 00 4048,5,5 4 4,5 4 8,5 0,5 5 0 00 40448 4 0,5 5 8,5 4,5 4 00 FEME SOKETS in PV (mm²) WG D a a pcs. D a a 448 0,5,5 4 4 8,5 4,5 5 00 448,5,5 4 4,5 4 8,5 5 5 00 4448 4 0,5 5 8,5 5,5 4 00 - Elematic abling Systems
TERMINS // INSUTED RIMPING TERMINS // HET SHRINKE UTT ONNETOR The butt connectors are made of a tinned copper tube covered by a heat shrinkable tube with a special adhesive inside. The polymer used for the insulation is suitable to be crimped with the dedicated tool. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Insulation material: cross-linked polyolefin. Shrinking temperature: 00 Working temperature: -55 5. Dielectric strength: 30 kv/mm. PPITIONS The butt connectors are covered by a heat shrinkable tube with a special adhesive inside granting a perfect sealing. ENEFITS The internal adhesive insulation provides an effective sealing of the electrical connection. D S HET SHRINKE UTT ONNETOR (mm²) WG D S pcs. 40 0,5,5 3 5 5,4 0,47 00 50,5,5 4 3 5 5,8 0,5 00 45 4 0 4 5, 0,57 00 INKED PRODUTS: Tools for terminals, pages 98 Elematic abling Systems - 3
TERMINS // OPPER UGS // OPPER UGS The copper lugs are obtained from pure electrolytic copper tube (99,9%) with high conductivity; they are provided with an hole for the inspection of the conductor. Every lug is marked with the of the wire and with the screw diameter. TEHNI DT onnector material: electrolytic tinned copper (purity grade 99,9%). Tin coating thickness: 4µm. PPROVS/ERTIFITIONS ccording to the norm: IE 38-:993. PPITIONS Electrical wiring in electric and electronics switchboards. ENEFITS The hot treatment grants the best crimping operation. The particular countersinking grants the easiest insertion of the wire. The process of electrolytic tin plating ensures the best protection against oxidation. INKED PRODUTS: Tools for copper lugs, see pages 04 4 - Elematic abling Systems
TERMINS // OPPER UGS // OPPER UGS OPPER UGS,5 300 mm² D3 D4 H D D ode Section Ø Screw Dimensions (mm) Pack arton (mm²) (mm) D D D3 D4 H pcs. pcs. 30004,5 5 4,4 8,7 5,3 0 5 9 00.000 30005 4,4 0,4 5 00.000 30008,5 4 4,3,7 8,7 4,3 0 7 9 00.000 30009 5 4,3,7 8,7 5,3 0 7 9 00.000 3000 4,3,7 0,3,4 7 00.500 300 4 5 4,8 3, 8,7 5,3 0 8,5 00.500 3003 4,8 3, 0,3,4 8 3,5 00.000 3004 8 4,8 3,,5 8,3 7 8 8,5 00.000 300 5 5,5 3,8 0,3 5,3 3 9 00.000 3008 5,5 3,8 0,3,4 3 9 00.000 3009 8 5,5 3,8 3,9 8,3 9 9 00 800 300 0 5,9 4,7,9 5,3,5 0 7,5 00 700 3003,9 4,7,9,4,5 0 7,5 00 00 3004 8,9 4,7 3,5 8,3 5,5 0 30,5 00 500 3005 0,9 4,7 5 0,5 5,5 0 30,5 00 500 3008 5 7,8 5,,9 5,3 7,5 00 500 3009 7,8 5,,9,4 7,5 00 500 30030 8 7,8 5, 3,5 8,3 5,5 3 00 500 3003 0 7,8 5, 0,5 3 00 400 3003 7,8 5, 7 3 37 00 300 3003 5 9,5 7, 3,5,4 34 50 00 30037 8 9,5 7, 3,5 8,3 34 50 500 30038 0 9,5 7, 0,5 9 37 50 500 30039 9,5 7, 8 3 40 50 500 3004 35 8, 5,7,4 8 4 39 50 400 3004 8 8, 5,7 8,3 8 4 39 50 400 30043 0 8, 5,7 0,5 5 43 50 350 30044 8, 8 3 5 43 50 300 3005 50,5 9,5 7,9,4 8 8 45 0 40 3005 8,5 9,5 7,9 8,4 8 8 45 0 40 30053 0,5 9,5 7,9 0,5 8 49 0 00 30054,5 9,5 7,9 3 8 49 0 00 30055 4,5 9,5 4,5 7 8 54 0 00 3005,5 9,5 5,5 3 8 54 0 0 3004 70 8 5,5,5 8,3 8 0 48 0 0 3005 0 5,5,5 0,5 0 5 0 0 300 5,5,5 3 0 5 0 0 3007 4 5,5,5 4,5 3 0 0 0 3008 5,5,5,5 3 0 0 0 30075 95 8 7 3,5 4,7 8,3 4 5 0 0 3007 0 7 3,5 4,7 0,5 4 5 0 0 30077 7 3,5 4,7 3 4 5 0 0 30078 4 7 3,5 4,7 4,5 33 4 7 0 0 30079 7 3,5 4,7,5 33 4 7 0 0 3008 0 8 0 5, 8,9 8,3 33 7 0 80 30087 0 0 5, 8,9 0,5 33 7 0 80 30088 0 5, 8,9 3 33 7 0 80 30089 4 0 5, 8,9 4,5 33 7 0 80 30090 0 5, 8,9,5 33 7 0 80 30097 50 0,5 30,4 0,5 30 3 79 0 70 30098,5 30,4 3 33 3 79 0 70 30099 4,5 30,4 4,5 33 3 79 0 70 3000,5 30,4,5 33 3 79 0 70 Elematic abling Systems - 5
OPPER UGS,5 300 mm² D3 D4 H D D ode Section Ø Screw Dimensions (mm) Pack arton (mm²) (mm) D D D3 D4 H pcs. pcs. 3007 85 3, 8,4 34 3 34 34 85 0 50 3008 4 3, 8,4 34 4,5 34 34 85 0 50 3009 3, 8,4 34,5 34 34 85 0 50 300 0 3, 8,4 34 34 34 85 0 50 30 40,4, 38,4 3 38,4 35 9 5 40 307 4,4, 38,4 4,5 38,4 35 9 5 40 308,4, 38,4,5 38,4 35 9 5 40 309 0,4, 38,4 38,4 35 9 5 40 303 300 8, 3,4 4,7,5 4,7 3 97 5 30 D D D3 OPPER PIN TERMINS 50 mm² arton (mm²) D D D3 pcs. pcs. 30700 0 5,8 3, 3, 5, 00.500 30700 0 3, 4, 4,8 4,3,8 00.000 3070 8, 3 5,3 8 00 00 30705 5 8,5 38 7 7 9 00 400 307035 35 8,8 43,4 8, 7 0, 00 00 307050 50 9, 50,5 9,5 8,4 50 50 D D UTT OPPER TUE TERMINS 300 mm² ode Section Dimensions (mm) Pack arton (mm²) (mm) D D pcs. pcs. 308003 5,5 3,5 5, 00.000 308004 0 30 4,5,5 00 00 308005 3,5 5,5 7,5 00 400 308007 5 35,5 7 9,5 50 500 308008 35 40,5 8,5 50 300 308009 50 40,5 0 3 0 0 30800 70 45,5,5 5 0 40 3080 95 50,5 3,5 8 0 00 3080 0 5,5 5 9,5 0 90 30803 50 70,5,5 0 70 30804 85 75,5 9 5 0 50 30805 40 80,5 7,5 5 40 3080 300 90,5 3,5 30,5 5 5 - Elematic abling Systems