Safety Checklist for Events Held at Hillbrook

Similar documents
EVENT SAFETY & PLANNING CHECKLIST For UNIVERSITY EVENTS

Work Health & Safety Event Safety Checklist Small Event

Occupational Health & Safety Event Safety Checklist

How to plan an event. Step 1: First things first. Step 2: How to make it all happen?

CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK

SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

LADDERS FIXED AND PORTABLE

SWMS No 007 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

TRADE AREA: ELECTRICAL INDUSTRY

Contractor Hazard Identification and Control Guide

Instructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading

You must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.

B S Glass Ltd Safety procedures- outsourced Workplaces

Safe Work Method Statement

Safe Work Procedure for installation of external cladding

Temporary load-bearing support for structural alterations or repairs

7 Hazard assessment 8 Worker participation 9 Hazard elimination and control

Safe Work Method Statement

Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t

How volunteer organisations can comply with the model Work Health and Safety Act LEGISLATIVE FACT SHEET SERIES

WHS CONTRACTOR INFORMATION PACKAGE

List all key terms and acronyms used in the procedure, and their definitions.

SAFE WORK METHOD STATEMENT

TLILIC2001 Licence to Operate a Forklift Truck

QUEENSLAND UNIVERSITY OF TECHNOLOGY

SAFE WORK METHOD STATEMENT SWMS No Version

2.0 Management Systems and Documentation

Monash University Academy of Performing Arts Safety Induction

SAFE WORK METHOD STATEMENT

S31 Opening Statement Working at Height

Surface exploration drilling

Safety Risk Assessment Working at Height: Mobile Tower Scaffold

Safety Risk Assessment Roofing Works / Surveying / Inspections

Working at Height. Policy and Procedures. Author: Beth Webster Assistant Safety Advisor. On behalf of School Safety Committee.

PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS

Appendix AC Safety Guidelines

This policy and associated Event Safety Checklist apply to all events held at any of Arts Centre Melbourne s venues.

SAFETY INDUCTION. Intro

SWMS No 009 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 4

SAFE WORK METHOD STATEMENT

IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY

Work At Height Health & Safety Management Standard Issue 3 (April 2011)

Marsden Jazz Festival Risk Assessment [07/18]

Potential risk of injury to staff

Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome

CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY

Method Statement Author

Working at Height - MEWPS & Ladders. Your company details Address Tel: Fax: Mobile:

Work Activity (e.g. Road Work): Work Location:.

TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE

Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS)

CLUB RISK ASSESSMENT TEMPLATE

Health & Safety Contractor rules

8. Fall Protection Procedures WAC

Risk assessment part 1 of 3

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11

SAFE WORK METHOD STATEMENT

Minimum Safety Requirements for Contractors Working on Railway Property

WORK METHOD STATEMENT CARPET LAYING

ANSI A Work Zone Safety for Highway Construction. Scott Schneider, CIH and Travis Parsons Laborers Health and Safety Fund of North America

Safe Work Method Statement

WHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)

Contractors' Code of Safe Practice

Ormiston Academies Trust. Ormiston Horizon Academy. Working at Height Policy October 2016

EXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors

Potential hazards People at risk and how? Actions already in place Further action required Action by

Contractor / Exhibitor Handbook

Appendix 4C - Sample SWMS Trenching

SCOUTS AUSTRALIA NSW

RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992

ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,

SWMS No 001 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 5

Suitability of Work Equipment

RISK ASSESSMENT FOR THE CHIMERA CLIMBING CENTRE DATE LAST UPDATED: 25 AUGUST STUART HOWARD

Working at Height Regulation 2005

Builders Guide to MANAGING SAFETY on Work Sites

Code of Practice and Instructions to Contractors Working for Viridor

Kettleshulme Parish Council Risk Assessment 2015 Kettleshulme Memorial Hall

Electricity Hazard Guide

SAFETY MANAGEMENT SYSTEM

SUPPLIER HEALTH AND SAFETY. Supporting a healthy and safe working environment for our people and customers

2018 INSPECTION REPORT

GENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE. St Euphemia College - General Work Health and Safety Checklist

Exercise IARD. Risk Assessment & Management Plan

INDUCTION GUIDE. USC Low-risk Contractor

Prevention of Falls and Working at Heights

Company Name: Address: ABN: Company Contact: Position: Phone No.: Date SWMS provided to Principal Contractor: Principal Contractor Signature: Date:

FATAL AND SEVERE RISK PROGRAM

Harbour Town Gold Coast Site Induction

Contact Name: Client Contact: This SWMS is approved by: Signature: Date

Safe Work Method Statement

Safe Work Method Statement

HEAT, COLD, SOLAR ULTRAVIOLET & INCLEMENT WEATHER

Buchanan. Approved: John Downes

Removing Frozen Clips

HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT

Guidance on Using Temporary Suspended Access Equipment

Event Health & Safety Hazard Plan

Staff Contractors. Public. Staff Contractors

WORK METHOD STATEMENT STRUCTURAL STEEL

Transcription:

Safety Checklist for Events Held at Hillbrook Hazards/ Issues or Tasks 1. EVENT ACCESS AND EGRESS Entry / Exit areas are kept clear and accessible. For an evening event, that you have appropriate Lighting. 2. TRAFFIC FLOW/ PARKING You have discussed parking requirements for your event with Hillbrook Staff. 3. AMENITIES You have discussed provision of adequate amenities /location of toilets and hand washing. 4. FIRE PREVENTION You acknowledge you have not brought onto campus any material that poses fire risks. Your staff and volunteers are aware of the fire evacuation procedures relevant to the planned event. 5. FIRST AID First Aid facilities suitable for type of event, and locations know by all staff 6. ELECTRICAL POWER/ GENERATORS Power access required? Provide details eg. 240v, generator, phase 3. If N/A go to Q.7 Event Manager s Name: Electrician s Name: Generator Hire Name: Other: Portable Residual circuit devices (RCDs) are used where required. No double adapters or piggy back plugs are used. All portable (Specified) electrical equipment including power leads, power boards have been inspected and tested in accordance with QLD Electrical Safety Regulation. (Double insulated annually, not double insulated every 6 months) 1 P a g e

All portable (Specified) electrical equipment including power leads, power boards are connected to a Safety Switch. Adequate protection of the public from electric shock and any trip hazards. All electrical leads and electrical equipment are placed in safe locations, e.g. not on top of unstable surfaces, across pathways. All leads, plugs, etc are protected from the weather and hazards such as water or other liquids, etc. Generators (if used) are placed in a safe location and are fenced or sectioned off from the public. Exhaust gas is vented to an open area. 7. UTILITIES / SITE SERVICES If underground or overhead utilities required contact school maintenance staff to ensure safe use & access. 8. FOOD Apart from events such as Sustainability Day, food cannot be served on campus without prior approval. Name of Provider: Name of Provider: Contact Person: Contact Person: Food License/ Permit Attached: YES NO Food License/ Permit Attached: YES NO If group does not hold a food license what food safety control measures will be used to ensure the health of people attending the event? Please attach food safety plan Permits - Please consider if other permits are required; such as events requiring road closure and emergency services. Job Safety Analysis/ Safety Plan is collected from relevant contractors covering all required permits/ licenses and plant registration. 9. STAGING AND PLATFORMS, MARQUEES, STALLS, VANS OR OTHER TEMPORARY STRUCTURES All stages are erected by personnel with appropriate training and certifications (as required). Adequate access and egress around all staging and platforms for event patrons and emergency services. Marquees, tents, food vans or other structures are erected or sited securely and do not encroach on thoroughfares/ clear paths. 2 P a g e

10. NOISE The event will include amplified music, speeches etc. Event noise is to be kept to reasonable levels and the local community made aware of the event by letter-box drop where it is believed that some disturbance is likely. Community advice to be coordinated with Hillbrook Anglican School. 11. WORK AT HEIGHTS Banner, flags or signs erection Permission is obtained from Maintenance Staff for placement of banners or other large display items. Ladders are well maintained and suitable for work undertaken & weight (industrial rated) No work done from ladders unless 3 points of contact able to be maintained at all times e.g.: 2 feet and 1 hand. Assistance of a second person is provided where required e.g.: holding ladder for stability. Right type of equipment is used for the height access job (i.e. ladder, cherry picker, etc) Boom lifts (cherry pickers) operators use appropriate safety body harnesses attached to bucket. 12. MANUAL HANDLING Loads are able to be delivered as close as possible to area using vehicle or mechanical aids (e.g. trolley) 13. LIQUID PETROLEUM GAS (LPG) AND HEATERS In the event a hazardous chemical must be brought on site by the contractor, the School must be notified 14. PERSONAL PROTECTIVE EQUIPMENT (PPE) All tasks to be undertaken by staff and volunteers are checked for the right PPE and PPE is provided if needed (e.g. gloves, aprons, earplugs, closed toe shoes, waterproof jacket, etc) Separate risk assessments may be required for high risk tasks. Fact Sheet Information from Work Health Safety Queensland Duties under the Work Health and Safety Act 2011 for people conducting public events When a public event is conducted by a person conducting a business or undertaking (PCBU), the Work Health and Safety Act 2011 (the Act) applies and the PCBU must ensure, so far as is reasonably practicable: the health and safety of workers in the workplace that work carried out as part of the event does not put the health and safety of participants or spectators at risk the work environment is without potential risks to health and safety plant and structures are safe systems of work are safe. Patrons attending an event may encounter health and safety risks when attending an event. Workers and other persons such as patrons at public events conducted by PCBUs also have a duty of care under the Act to: take reasonable care for their own health and safety take reasonable care that they do not adversely affect the health and safety of others comply with reasonable instructions given by the PCBU. For more information Further information on workplace health and safety and the new laws is available at www.worksafe.qld.gov.au 3 P a g e

EXAMPLES OF EVENT HAZARDS Security Cash handling People Inappropriate use of staff Plant Training Certification Supervision of operation Poor or absent Maintenance Isolation/segregation people The event Communication equipment Asset protection Entry control Legal Interaction with law enforcement agencies Planning Emergency management Contingency planning Accessibility Ramps Parking Public transport Signage Access to venues Egress Seating Materials handling Mechanical handling Food handling safety Furniture fixture and equipment Locations/storage Weights, height, dimensions Condition of terrain, path of travel Contractors Co-coordinating contractors Communication Legal compliance Job safety analysis/ risk assessment and safety plans Training/ Licensing Accreditation Contracts Staff First aid Food preparation/safety Fatigue Conditions excessive heat/cold Competency/suitability Welfare breaks, Sun exposure -sunscreen, Temperature extremes heat /cold Working at height Scaffolds licensed /trained erectors Unsafe Use of Winches Unsafe use of Ladders Proximity to Overhead power lines Edge protection ( off roofs or platforms) Camera platforms Rigging/lighting Improper use of Safety harnesses - Slips and trips Electrical cables across pathways Uneven ground, loose surfaces Adverse Weather Flooring design/surfaces Poor design or placement of barriers Poor Lighting Inadequate Queuing systems Edge protection Climbing for vantage points Inappropriate footwear Bump In stage Erection of Temporary structures Unauthorised access Electrical safety Slips/trips Weather Fire safety Evacuation plans Fire prevention plan Dangerous Goods storage Knowledge and use of equipment Appropriate firefighting equipment Obstruction and security of fire fighting Equipment Manual handling Excessive weight or awkward dimensions Lack of Mechanical aids Poor packaging by suppliers Training