MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Tuxton Trust Dexron VI

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

Material Safety Data Sheet

GulfTEC Synthetic Motor Oil 0W-20

MATERIAL SAFETY DATA SHEET

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

Carolina Narrow Fabric Company

OSHA regulated. NE NE No No No. NE NE No No No

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

3. Fire And Explosion Hazard Data FLASH POINT: Not determined. However the product is combustible. METHOD USED: Estimated from ingredients.

MATERIAL SAFETY DATA SHEET. Revision Number: 3

MATERIAL SAFETY DATA SHEET

Weight percent. CAS No.

Safety Data Sheet Lyden Oil Company

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET - REPORT NO FOR A PRODUCT CALLED "RUST-BUSTER" DISTRIBUTED BY NORVEY, INC.

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

SECTION 2 - HAZARDOUS INGREDIENTS Ingredient Name CAS Number Percent TSCA

Activated Carbon %

MATERIAL SAFTEY DATA SHEET

MAPP Gas. Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet. Section 1 - Chemical Product and Company Identification

WT-9011 SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/2015

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Safety Data Sheet. Tuxton TO-4 Fluid SAE 50W

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

Material Safety Data Sheet SeaKlear: Free & Klear

1. Product And Company Identification

Version /28/2006

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

SECTION I - IDENTIFICATION

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

MATERIAL SAFETY DATA SHEET

SECTION I - IDENTIFICATION

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

SAFETY DATA SHEET FOR FALK GMAX 6000

MATERIAL SAFETY DATA SHEET PAGE 1

Section 1 Chemical Product and Company Information. Product Name: ATI PAO-4 Preparation Date: 11/21/00 Product Use: Filter Testing

MATERIAL SAFTEY DATA SHEET

Safety Data Sheet Synthetic Engine Oil 0W-40

MATERIAL SAFETY DATA SHEETS

Version /20/2006

Sodium Lauroyl Sarcosinate

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 5 Trilin 10G Date Prepared: May 22, 1996

SECTION I - IDENTIFICATION

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/08/09 SCENT WINTERGREEN SUPERSEDES: 6/23/08

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

Safety Data Sheet 3% U.S.P HYDROGEN PEROXIDE

Material Safety Data Sheet

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

3. COMPOSITION / INFORMATION ON INGREDIENTS

Safety Data Sheet. Address GHS Precautions If skin irritation occurs: Get medical advice/attention

SAFETY DATA SHEET. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Nova Pressroom Products

Material Safety Data Sheet SeaKlear: Phosphate Remover

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Thoroseal Waterproofing Paint

CB Glass - Liquid Luster SDS Revision Date 01/12/2016. Safety Data Sheet Craft Center Drive Smithville TN Ext 124

Version /28/2006

SAFETY DATA SHEET. Allied Food Grade AW 68 SECTION 1: PRODUCT IDENTIFICATION

Label Elements. Chemical Name CAS Concentration Synthetic PAG Base Oil Proprietary 75-90% Non-hazardous materials Proprietary <30%

Material Safety Data Sheet For: Die Set Lube MSDS I.D. #135 P/N Quart Size. MSDS I.D. #136 P/N Gallon Size

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PAGE 1

24-HOUR EMERGENCY PHONE: CHEMTREC

SECTION 2 COMPOSITION / HAZARDOUS INGREDIENTS INFORMATION INGREDIENT WT % TLV / PEL* CAS # 9-OCTADECEN

MSDS AUTOGUARD DE-ICER Page 1 of 6. Address: 2340 U.S. Highway 301 North Dunn, NC 28334

SAFETY DATA SHEET MSDS DATE: 6/27/2016

Safety Data Sheet. Trade Name: RNase A. Revision Date: 12/30/2016 SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: RNase A

: ACCELGUARD GAL DRUM

Version /30/2006

MATERIAL SAFETY DATA SHEET

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

Safety Data Sheet Lyden Oil Company

Material Safety Data Sheet

Carolina Narrow Fabric Company

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

SAFETY DATA SHEET. TRD Revision 01/30/ PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDOUS IDENTIFICATION

Transcription:

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION TRADE NAME SYNONYMS : Light Liquid Paraffin : KAR LIQUID PARAFFIN LIGHT 2. COMPOSITION / INFORMATION ON INGREDIENTS Components CAS Number Weight % C17-C26 Paraffins 90622-46-1 100 See Section 8 for Exposure Guidelines and Section 15 for OSHA Classification 3. HAZARDS IDENTIFICATION Emergency Overview Water white, oily liquid. Mild hydrocarbon odor. HEALTH HAZARD: MAY CAUSE EYE OR SKIN IRRITAION. High vapor concentrations may cause headache, stupor, dizziness, or irritation of throat and eyes. Potential Health Effects EYES : Irritation may occur with exposure to concentrated vapors or contact with product. SKIN : Repeated or prolonged contact can cause redness, irritation, and scaling of the skin (dermatitis). Normal care and personal hygiene should prevent skin effects. INHALATION : Exposure to high concentration of vapors may result in headache and stupor. INGESTION : Lung exposure to this product either by prolonged breathing of a mist or vomiting following ingestion, can lead to serious lung injury and possibly death. (See section 11 for Toxicological Information). 4. FIRST AID MEASURES EYES SKIN : Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, seek medical attention. : Immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash affected area with mild soap. Call a physician if irritation occurs.

INHALATION : Remove to fresh air. If not breathing, give artificial respiration and seek medical attention immediately. Oxygen should only be administered by trained personnel. INGESTION : DO NOT INDUCE VOMITING. Seek medical advice immediately. 5. FIRE FIGHTING MEASURES Flammable Properties FLASH POINT / METHOD : 300 F (150 C) / PM, Min. AUTOIGNITION TEMPERATURE : 500 F (250 C) FLAMMABLE LIMITS IN AIR % BY VOLUME: None Expected. FIRE AND EXPLOSION HAZARD : None Expected. FIRE FIGHTING INSTRUCTIONS : Water spray, carbon dioxide, dry chemical, or alcohol compatible foam is recommended. 6. ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE OF A SPILL OR LEAK: Evacuate the area and eliminate all sources of ignition. Contain the spill if possible. Material may be picked up with a solid sorbent. Dispose of only in accordance with local, state, and federal regulations. CERCLA HAZARDOUS SUBSTANCE: Component CERCLA RQ Maximum Wt. % Contains no chemicals on the CERCLA Hazardous Substance List. 7. HANDLING AND STORAGE ELECTROSTATIC ACCUMULATION HAZARD: Yes ground all equipment. USUAL SHIPPING CONTAINERS: Tank cars, tank trucks. STORAGE / TRANSPORT TEMPERATURE: Ambient. (Product will freeze at 18 F (-8 C))

STORAGE / TRANSPORT PRESSURE: Ambient. (Product will freeze at 18 F (-8 C)) LOAD / UNLOAD TEMPERATURE: Ambient, above freezing point. (Product will freeze at 18 F (-8 C)) STORAGE AND HANDLING MATERIALS: Carbon steel is suitable. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls Air contaminant levels should be controlled below the PEL or TLV for this product (see Exposure Guidelines of this section). Mechanical ventilation may be necessary if working with this product in enclosed areas and at elevated temperatures. Personal Protective Equipment EYES :When contact with liquid is possible, use a face shield and chemical goggles. Otherwise use safety glasses or goggles. SKIN : Chemical gloves should be worn to prevent repeated contact. If potential for significant exposure to liquid exists, use full protective clothing and chemical boots. RESPIRATORY PROTECTION: NIOSH-approved organic vapor air-purifying respirator, self contained breathing apparatus, or air supplied respirators dependent on concentration. Filename: Liquid Paraffin Light Revision Date: 05.05.2004 Exposure Guidelines: No exposure limit has been set for exposure to vapors for this product. However, Lamplight and its suppliers recommend the ACGIH/OSHA/NIOSH recommended limit of 5 mg/m3 (8-hour TWA) fir exposure to mists of this product. Component OSHA PEL ACGIH TLV None Established. PEL = Permissible Exposure Limits TLV = Threshold Limit Value TWA = Time Weighted Average ( 8hr.) STEL = Short Term Exposure Limit (15 min.) Carcinogenicity No carcinogenic ingredients. 9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: VISCOCITY: Water white, oily liquid 7.5-100.0 cst @ 104 F (40 C). ODOR: PHYSICAL STATE: Mild hydrocarbon odor. Liquid. VAPOR PRESSURE (mm Hg.). BOILING POINT: 0.05 @ 68 F (20 C). 536-662 F (280 350 C). VAPOR DENSITY (Air=1). MELTING POINT: 7-8 (-22)-27 F ((-30)- (-3) C). SOLUBILITY IN WATER: SPECIFIC GRAVITY (H2O = 1): Immiscible 0.82 @ 60 F/60 F (16 C/16 C)min. 10. STABILITY AND REACTIVITY CONDITIONS TO AVOID: High Temperatures. INCOMPATIBILITY WITH OTHER MATERIALS: Strong Oxidizers. HAZARDOUS DECOMPOSITION PRODUCTS: Combustion products include carbon dioxide, carbon monoxide and possibly other unidentified organic compound. HAZARDOUS POLYMERIZATION: Stable. 11. TOXICOLOGICAL INFORMATION EYES: Primary Eye Irritation Index (Rabbits): 5.7 for non-washed eyes after 1 hour, 6 for washed eyes after 1 hour. (Maximum score is 110). SKIN: Acute Dermal LD50 (Rabbits): >2 g/kg Primary Skin Irritation Index (Rabbits): 4.4 (Maximum score is 8.0) INHALATION: LC50 (Rats): >5.8 mg/l (nominal) with four-hour exposure. INGESTION: Acute Oral LD50 (Rat): > 5 g/kg. 12. ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION CHEMICAL FATE INFORMATION : Not Available. : Not Available. 13. DISPOSAL CONSIDERATIONS SPECIAL INSTRUCTIONS: Evacuate the area and eliminate all sources of ignition. Contain the spill is possible. Material may be picked up with solid sorbent. Dispose of only in accordance with local state, and federal regulations. WASTE CLASSIFICATION: If discarded in its purchased form, this product is not a RCRA hazardous waste. Re-evaluation of the product may be required by the user at the time of disposal, since the product uses, transforms, and mixtures may change the classification. EMPTY CONTAINERS: Empty containers retain product residue (liquid and/or vapor) can be dangerous. DO NOT PRESSURIZE, CUT WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioner, or properly disposed of. (See Section 6 for CERCLA Reporting Requirements). Filename: Liquid Paraffin Light Revision Date: 05.05.2004 14. TRANSPORT INFORMATION DOT DESCRIPTION: This product is not a hazardous material according to DOT regulations for ground transportation. ICAO / IATA DESCRIPTION: This product is not a dangerous good as defined by IATA for air transportation. IMO DESCRIPTION (IMDG CODE): This product is not a dangerous good as defined by IMO in the IMDG Code for water transportation. 15. REGULATORY INFORMATION U.S. Federal Regulations OSHA HAZARD COMMUNICATION STANDARD CLASSIFICATION: Non-hazardous as defined by the OSHA Hazard Communication Standard. TSCA INVENTORY LISTING: Component CAS Number Alkanes (C17-C26) 90622-46-1

SARA 302 STATUS Component CAS Number Maximum Wt. % Contains no chemicals subject to SARA 302 reporting. SARA 311/312 CLASSIFICATION: Non-hazardous according to SARA 311/312. SARA 313 CHEMICALS: Component CAS Number Maximum Wt. % Contains no chemicals subject to SARA 313 reporting. (See Section 6 for CERCLA Reporting Requirements.) International Regulations WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS) CLASSIFICATION: This material is not a controlled product as defined by Canada's Workplace Hazardous Materials Information System (WHMIS). State Regulations CALIFORNIA SAFE DRINKING WATER ACT (PROP 65) LISTING: Component CAS Number **No ingredients listed in this section** CALIFORNIA AIR RESOURCES BOARD Title 17, Article 2, Section 94510 Consumer Products: This product is VOC exempt by 94510 (d)(1) as it has a vapor pressure below 0.1 mm Hg at 20 C. 16. OTHER INFORMATION Hazard Ratings NFPA HMIS Health: 1 1 FLAMMABILITY: 1 1 REACTIVITY: 0 0 Revision Summary Date Description

05.05.2004 Document created. THE DATA AND INFORMATION CONTAINED HEREIN ARE BEING FURNISHED FOR INFORMATIONAL PURPOSES ONLY. UPON TH E EXPRESS CONDITION THAT EACH CUSTOMER SHALL MAKE ITS OWN ASSESMENT OF APPROPRIATE USE AND APPROPRIATE SHIPPING, TRANSFER, AND STORAGE MATERIALS AND PROCEDURES FOR PARAFFIN OILS PRODUCTS.PARAFFIN OILS DISCAIMS ANY LIABILITY FOR DAMAGE OR INJURY WHICH MAY RESULT FROM THE USE OF THE ABOVE DATA,AND NOTHING CONTAINED THEREIN SHALL CONSTITUTE A GUARANTEE, WARRANTY, (INCLUDING WARRANTY OFMERCHANTABILITY) OR REPRESENTATION (INCLUDING FREEDOM FROM PATENT LIABLITY) BY PARAFFIN OILS WITH RESPECT TO THE DATA, THE PRODUCTS DESCRIBED, OR THEIR USE FOR ANY SPECIFIC PURPOSE, EVEN IF THAT PURPOSE ISKNOWN TO PARAFFIN OILS.