: Sika Block SAFETY DATA SHEET. Sika Block. Version 1.0 MSDS Number: Revision Date:

Similar documents
: SikaSet Accelerator

Recommended use of the chemical and restrictions on use Product use : Concrete and mortar admixture. :

Intraplast Z :

Sikaflex -527 AT : Hazardous components Chemical Name CAS-No. Concentration (%) N-[3-

: : No hazards which require special first aid measures.

SikaSeal Acrylic 100 SAFETY DATA SHEET. Version 1.0 MSDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sika CNI SAFETY DATA SHEET. Sika CNI. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Version 1.0 MSDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

: SikaSeal Aquarium SAFETY DATA SHEET. SikaSeal Aquarium. Version 1.0 MSDS Number: Revision Date:

: SikaGrout Fluidifier

: Sikalastic -1K SAFETY DATA SHEET. Sikalastic -1K. Version 1.0 SDS Number: Revision Date:

: SikaFume SAFETY DATA SHEET. SikaFume. Version 1.0 MSDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sika Plug SAFETY DATA SHEET. Sika Plug. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

MCB A-74 SAFETY DATA SHEET. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sikanol M SAFETY DATA SHEET. Sikanol M. Version 1.0 SDS Number: Revision Date: 2017/06/01 SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: SikaFloor Level PRO

: Specific target organ toxicity - single exposure : Category 3 (Respiratory system)

: SikaTite Moisture Seal 2K Part B

: Sika MaxMix Plasticiser

SikaTack ELITE :

: Sika MonoTop -723 N

: Sika FerroGard 903+

: Sikafloor Level-15 SAFETY DATA SHEET. Sikafloor Level-15. Version 1.0 SDS Number: Revision Date: 2017/08/31

: : No hazards which require special first aid measures.

: Sikaflex Construction (AP)

: SikaTop Seal-109 MY Part A

Version 4.0 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

: : Category 2A. : Category 3 (Respiratory system) H319 Causes serious eye irritation. H335 May cause respiratory irritation.

: Sikafloor Marine Elastic

: SikaCeram-255 StarFlex LD

: Sika Ferrogard 500 Crete

: ECO SCREED RAPID (CONCENTRATE)

: Sika MonoTop -620 MY

: Sikafloor -81 EpoCem Comp.C

: SikaFloor Marine KG-404 N

: SikaRapid -4 SAFETY DATA SHEET. SikaRapid -4. Version 1.0 MSDS Number: Revision Date:

: Sika CarboDur (all types)

Sigunit -L53 AF Patiki Road Avondale Auckland AKL 1026 : : No hazards which require special first aid measures.

: Sikafloor -20/-21/-29/-31 PurCem Part A

Sikafloor Level Patiki Road Avondale Auckland AKL 1026 : H318 Causes serious eye damage.

85-91 Patiki Road Avondale Auckland AKL 1026 :

Sikaflex -552 AT Patiki Road Avondale Auckland AKL 1026 : H319 Causes serious eye irritation. H351 Suspected of causing cancer.

Sikaflex -263 : : Category 2 (Central nervous system)

Version 2.0 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

Sikaflex 291 SAFETY DATA SHEET. Version 1.1 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Cavex Patiki Road Avondale Auckland AKL 1026 :

: Sika MonoTop -910 N

Sika Plug (NZ) Patiki Road Avondale Auckland AKL 1026 :

SikaWrap -430G. Hazardous components Chemical name CAS-No. Concentration (%) glass, oxide, chemicals >= 90 - <= 100

: Sikafloor -21 PurCem FG (A)

Sikaflex AT-Facade Patiki Road Avondale Auckland AKL 1026 : : Category B

: Sika BlackSeal Plus (NZ)

SikaWrap Hex-103C. woven fabric : : No hazards which require special first aid measures.

: Sika ViscoCrete -2055

Intraplast Z : : No hazards which require special first aid measures.

Version 1.1 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

: Sika -102 Waterplug

: Sikaflex -521 UV SAFETY DATA SHEET. Sikaflex -521 UV. Version 1.0 SDS Number: Revision Date: 2016/03/18

: Sika Air Detrainer P3

Sikaflex MS Patiki Road Avondale Auckland AKL 1026 :

: Sikadur -42 MP Normal/Slow Part C

: SikaForce L100 Part A

Version 2.0 MSDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

: Sika Control 40 (NZ)

: Sika 4 A SAFETY DATA SHEET. Sika 4 A. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sikaflex AT-Façade SAFETY DATA SHEET. Sikaflex AT-Façade. Version 1.0 SDS Number: Revision Date: 2017/12/07

Sikaflex -260 N : : Category 2 (Central nervous system)

: SikaGrind MC-10 A MY-2

Sika Repair Mortar : : Category 1. : Category 3 (Respiratory system)

: SikaRapid - 1 NZ SAFETY DATA SHEET. SikaRapid - 1 NZ. Version 1.0 SDS Number: Revision Date: 2017/06/20

: Sikaflex -255Extra+

: SikaTard -930 SAFETY DATA SHEET. SikaTard Version 1.0 SDS Number: Revision Date: 2017/10/09

Version 1.1 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

: Sika (Thailand) Limited 700/37 Moo. 5 Amata Nakorn Estate Bangna-Trad Km.57 Tambol Klong Tamhru Muang District Chonburi Thailand

: Sika AnchorFix -S Part A

: Sikaflex -400 Fire SAFETY DATA SHEET. Sikaflex -400 Fire. Version 1.0 SDS Number: Revision Date: 2017/07/24

: Sika AnchorFix -1 Part A

Sikaflex -295 UV. Recommended use of the chemical and restrictions on use : Sealant/adhesive, Product is not intended for consumer use

: Sikaflex -11 FC SAFETY DATA SHEET. Sikaflex -11 FC. Version 1.0 SDS Number: Revision Date: 2016/04/05

: Sikaflex 291 Tube SAFETY DATA SHEET. Version 1.0 MSDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sikadur Combiflex SG Tape

: Sikafloor -359 MYG Part A

: Sikasil NG SAFETY DATA SHEET. Sikasil NG. Version 1.0 SDS Number: Revision Date: 2017/08/01

: Sika AnchorFix Part B

: Sika -4 A SAFETY DATA SHEET. Sika -4 A. Version 1.0 SDS Number: Revision Date: 2017/12/08 SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Sika WT-200 P Patiki Road Avondale Auckland AKL 1026 :

: Sikadur Injectokit TH

: Sikadur -31 CF Normal Part A

: Pulastic Coating 221W Part B

: Sikabond Instant Nails

: Antisol HR SAFETY DATA SHEET. Antisol HR. Version 2.0 SDS Number: Revision Date:

Version 2.0 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

: Sikafloor -21 PurCem FG (B)

: Sikaflex 11FC Tube SAFETY DATA SHEET. Sikaflex 11FC Tube. Version 1.0 SDS Number: Revision Date:

Sika Aktivator-205 : Specific target organ toxicity - single exposure : Category 3 (Central nervous system)

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION TAMSI C-FLEX 2 PLUS POWDER. Synonym(s)

: PROHESIVE PRO PREMIUM

: Sikafloor -264 HC Part A

: Sikaflex -Construction (AP)

: Sikadur Blade Repair Resin - Part A

Transcription:

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product code : 000000608908 Type of product : liquid Manufacturer or supplier's details Company : Sika Australia Pty. Ltd. Address : Elizabeth Street 55 Wetherill Park NSW 2164 Telephone : +61297251145 Emergency telephone number : + 61 1800 033 111 Telefax : +61297253330 E-mail address : EHS@au.sika.com SECTION 2. HAZARDS IDENTIFICATION GHS Classification Skin corrosion/irritation : Category 2 Serious eye damage/eye irritation : Category 1 GHS Label element Hazard pictograms : Signal word Hazard statements Precautionary statements : Danger : H315 Causes skin irritation. H318 Causes serious eye damage. : Prevention: P264 Wash skin thoroughly after handling. P280 Wear eye protection/ face protection. P280 Wear protective gloves. Response: P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. P332 + P313 If skin irritation occurs: Get medical advice/ atten- 1 / 8

tion. P362 Take off contaminated clothing and wash before reuse. Other hazards which do not result in classification None known. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance / Mixture : Mixture Hazardous components Chemical Name CAS-No. Concentration (%) sodium dodecyl benzene sulphonate Not Assigned >= 10 - < 30 SECTION 4. FIRST AID MEASURES General advice If inhaled In case of skin contact In case of eye contact If swallowed Most important symptoms and effects, both acute and delayed Notes to physician : Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. : Move to fresh air. Consult a physician after significant exposure. : Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. : Small amounts splashed into eyes can cause irreversible tissue damage and blindness. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Keep eye wide open while rinsing. : Clean mouth with water and drink afterwards plenty of water. Induce vomiting immediately and call a physician. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. : irritant effects Excessive lachrymation Dermatitis See Section 11 for more detailed information on health effects and symptoms. Causes skin irritation. Causes serious eye damage. : Treat symptomatically. SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media : Use extinguishing measures that are appropriate to local cir- 2 / 8

cumstances and the surrounding environment. Hazardous combustion products Specific extinguishing methods Special protective equipment for firefighters : No hazardous combustion products are known : Standard procedure for chemical fires. : In the event of fire, wear self-contained breathing apparatus. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures : Use personal protective equipment. Deny access to unprotected persons. Environmental precautions Methods and materials for containment and cleaning up : Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities. : Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. SECTION 7. HANDLING AND STORAGE Advice on protection against fire and explosion Advice on safe handling Hygiene measures Conditions for safe storage : Normal measures for preventive fire protection. : Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products : Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday. : Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with local regulations. 3 / 8

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Contains no substances with occupational exposure limit values. Personal protective equipment Respiratory protection : Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, selfcontained breathing apparatus must be used. Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Eye protection Skin and body protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary. : Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Colour Odour Odour Threshold : liquid : blue : odourless ph : ca. 9 Melting point/range / Freezing point Boiling point/boiling range Flash point Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit : Not applicable 4 / 8

Vapour pressure Relative vapour density Density : 1.01 g/cm3 (20 C (68 F) ()) Solubility(ies) Water solubility Partition coefficient: n- octanol/water Auto-ignition temperature Decomposition temperature Viscosity, dynamic Viscosity, dynamic Molecular weight Volatile organic compounds (VOC) content : soluble SECTION 10. STABILITY AND REACTIVITY Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials : No dangerous reaction known under conditions of normal use. : The product is chemically stable. : Stable under recommended storage conditions. SECTION 11. TOXICOLOGICAL INFORMATION Acute toxicity Skin corrosion/irritation Causes skin irritation. Serious eye damage/eye irritation Causes serious eye damage. Respiratory or skin sensitisation Skin sensitisation: Respiratory sensitisation: 5 / 8

Chronic toxicity Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT - single exposure STOT - repeated exposure Aspiration toxicity SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Product: Additional ecological information : There is no data available for this product. SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues Contaminated packaging : Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company. : Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. SECTION 14. TRANSPORT INFORMATION International Regulation ADR 6 / 8

UNRTDG IATA-DGR IMDG-Code Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied. National Regulations 49 CFR TDG ANTT 420 GB 6944/12268 ADG NZS 5433 SECTION 15. REGULATORY INFORMATION Safety, health and environmental regulations/legislation specific for the substance or mixture Standard for the Uniform Scheduling of Medicines and Poisons : No poison schedule number allocated International Chemical Weapons Convention (CWC) Schedules of Toxic Chemicals and Precursors : Not applicable Prohibition/Licensing Requirements : There is no applicable prohibition or notification/licensing requirements, including for carcinogens under Commonwealth, State or Territory legislation. The components of this product are reported in the following inventories: AICS : On the inventory, or in compliance with the inventory SECTION 16. OTHER INFORMATION Date format : dd.mm.yyyy Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS may be obtained from the following website: aus.sika.com 7 / 8

The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the product data sheet prior to any any use and processing. 8 / 8