Pneumatic drilling equipment
Contents Block cutters Magic Medium...2 Rombo I HD & II HD...4 Twingo...6 Down-the-hole machine Speedrill VH...8 Sharpening equipment Leon...10 Dust collectors Bermuda Junior... 11 Bermuda Senior... 11 Accessories Hydraulic steel puller...12 Manual stabilizer...12
Block cutters Magic Medium A pneumatic lightweight chain block cutter is ideal for primary, vertical and horizontal cutting as well as for sectioning and squaring of blocks. Since it is one-man operated, it minimizes physical fatigue, material wastage and reduces energy consumption while increasing the daily production of blocks. It is particularly versatile and easy to handle. Technical data: Total air consumption (with a rock drill preset for BBD 94 or Oprema MP 90 rock drill): 4.000/5.000 l/min Working pressure: 7 bar Total weight (rock drill excluded): 340 kg Track length: 4 m Integral drill steel: 2.4 m Holes diameter: 22-45 mm Options: 3 m extension track 4 m extension track Kit of level for horizontal drilling
Block cutters ROMBO I HD & II HD Pneumatic medium weight chain block cutter. Ideal both for primary cutting and for squaring of block. Equipped with one or two rock drills, it is ideal for vertical and horizontal drilling. It satisfies all quarrying requirements, ensuring maximum efficiency, high accuracy and minimum maintenance costs. Technical data: ROMBO I HD: ROMBO II HD: Total air consumption (with a rock drill preset for BBD 94 or Oprema MP 90 rock drill): 4.000/5.000 l/min Working pressure: 7 bar Total weight (rock drill excluded): 430 kg Track length: 4 m Integral drill steel: 2.40 m Holes diameter: 22-45 mm Options: 4 m extension track Kit of manual stabilizer Hydraulic steel puller Column for 3.20 m integral drill steel Total air consumption (with two rock drills pre-set for BBD 94 or Oprema MP 90 rock drill): 9.000/11.000 l/min Working pressure: 7 bar Total weight (rock drills excluded): 520 kg Track length: 4 m Integral drill steel: 2,40 m Holes diameter: 22-45 mm Options: 4 m extension track Column for 3.20 m integral drill steel
Block cutters Twingo Pneumatic heavy-weight chain block cutter. Ideal for primary cutting as well as for squaring of blocks. Designed for vertical drilling, it is equipped with two rock drills mounted on independent columns that, besides increasing the drilling speed, allow also to operate in the most difficult geological conditions. The machine structure allows to operate without being fixed to the ground, optimizing the positioning time. Technical data: Total air consumption (with two rock drill preset for BBD 94 or Oprema MP 90 rock drill): 9.000/11.000 l/min Working pressure: 7 bar Total weight (rock drill excluded): 1.600 kg Track length: 6 m Integral drill steel: 4 m Holes diameter: 22-45 mm Longitudinal inclination: +/- 15 Options: 4.5 m extension track 6.0 m extension track Kit of manual stabilizer Hydraulic steel puller
Down-the-hole machine Speedrill VH Pneumatic chain feed drilling machine suitable for horizontal as well as vertical line drilling and is equipped with one down-the-hole hammer. It is suitable for preparing the diamond wire sawing operations.the presence of an aluminium column and the possibility of disassembling the machine into four parts makes transportation and handling easier. Technical data: Total air consumption (suitable for 2 or 3 DTH): 5.000/6.000 Lt/min. Total weight down-the-hole excluded: 300 kg Start drill: 1.5 m rods Working pressure: 7-12 bar Rods diameter: 54/76 mm Tool diameter: 70/90 mm Rotation head power: 90 Kgm Options: 2 DTH 3 DTH 1.5 m rods 2 3/8
Sharpening equipment Leon Integral drill steel sharpener, automatic with fastening grip for pneumatic steels. It allows the integral drill steel to make a 180 rotation around its own axis, providing the symmetrical sharpening of the two faces of the cutting edge without any external operation. Technical data: Weight: 47 kg Dimension (mts.): L 0.6 x H 0.52 x W 0.80 Air consumption: 1.500 l/min Air motor power: 2,2 CV Grinding disk dimensions: 150x80x32 mm
Dust collectors Bermuda Filter pneumatic dust collectors essential for preserving the health of drilling operators, the environment and the machines working in the quarry. Junior Filtering surface: 1.6 sqm Dust suction capacity: 3.5 cum/min Air consumption: 300/700 l/min Working pressure: 5/7 bar Linkable casings: 1 Filter cleaning by air flow inverter: Manual Dimension: 90 mm Weight: 46 kg Senior Filtering surface: 3.2 sqm Dust suction capacity: 4.5 cum/min. Air consumption: 500/1.200 l/min Working pressure: 5/7 bar Linkable casings: 2 Filter cleaning by air flow inverter: Manual/automatic Dimension: 90 mm Weight: 57 kg.
Accessories Hydraulic steel puller An indispensable accessory to reduce physical effort resulting from the operations needed for the extraction of integral drill steel. It ensures a valid help in the most difficult situations and in working time reduction. Manual stabilizer Besides providing higher stability, this accessory ensures a valid help to the worker, in positioning operations on any inclined surface.
9851 3324 01 2013-10 Nasik, India Legal Notice Copyright 2013, Perfora - Part of the Atlas Copco Group, Bagnolo Piemonte, Italy. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. www.perfora.com