ROYCO 782 PRF Lubricant Hydraulic fluid

Similar documents
Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Omni Clear Magic. Recreational Water Product

ProGuard Sodiium Carbonate

Material Safety Data Sheet

Material Safety Data Sheet SPA ESSENTIALS DEFOAMER

BioGuard Power Floc. BioGuard Power Floc. Water Clarifier

DANGER! Form: crystalline BIOGUARD REMEDY ERASE COPPER STAIN REMOVER. BIOGUARD REMEDY ERASE COPPER STAIN REMOVER Swimming Pool Product

Material Safety Data Sheet

Version: 1.2 Revision Date: 09/02/2010 Print Date: 03/05/2014 BIOGUARD SCALE INHIBITOR

SIMPLICITY FILTER AID

Material Safety Data Sheet BIOGUARD POWER FLOC

Omni Multi Purpose Algaecide 60

Material Safety Data Sheet

Material Safety Data Sheet

HL-1 LIQUID COMPONENT OF 77201

SAFETY DATA SHEET. Royco 885 (New formulation)

Material Safety Data Sheet BIOGUARD BALANCE PAK 200

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet OMNI POOL SURFACE CLEANER

SAFETY DATA SHEET. Royco 950

Version: 1.2 Revision Date: 01/01/2014 Print Date: 03/10/2014 SPAGUARD BALANCER SPA SENTRY

Material Safety Data Sheet

Material Safety Data Sheet

1.4. Emergency telephone number : US Emergency Telephone No (STERIS); (CHEMTREC)

Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.

Material Safety Data Sheet SPAGUARD TOTAL ALKALINITY

Material Safety Data Sheet BIOGUARD POOL TONIC

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

SAFETY DATA SHEET. Royco 44

Chemical Name: Concrete and Masonry Bonding Primer

1. IDENTIFICATION. US IVD Bacterial Test Standard BD Bruker US IVD Bacterial Test Standard

SAFETY DATA SHEET. Royco 363

Material Safety Data Sheet

SAFETY DATA SHEET ROYCO 581 MIL-C-6529 T1

SPOTLESS :: Safety Data Sheet Version 1.0 Issuing Date 06/1/15

Issue Date: 22-Jan-2014 Revision Date: 23-Jan-2014 Version 1 1. IDENTIFICATION. Dipropylene Glycol Dimethyl Ether 2. HAZARDS IDENTIFICATION

Issue Date: 29-Jul-2013 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Enviro Patrol Restroom Cleaner 2. HAZARDS IDENTIFICATION

CAS-No. EC-No. Index-No. Concentration Cetrimonium chloride % Water %

Issue Date: 04-Dec-2004 Revision Date: 18-Nov-2013 Version 1 1. IDENTIFICATION. Plastpro Fiberglass Doors 2. HAZARDS IDENTIFICATION

Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

1. IDENTIFICATION FAST FIND LEAK DETECTOR. Package type: 32oz & 1 gallon. For Professional use only. 2. HAZARDS IDENTIFICATION

Issue Date: 27-Dec-2011 Revision Date: 03-Feb-2015 Version 1 1. IDENTIFICATION. Malodor Eliminator, Water Based.

Issue Date: March 24, 2017 Revision Date: March 24, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

Plant Growth Regulator. Chemtura USA Corporation Chemtura Corporation (Worldwide HQ) 199 Benson Road Middlebury, CT USA

Safety Data Sheet. (Sorbitan Tristearate) DATE PREPARED: 8/14/2015. Section 1. Product and Company Identification

Safety data sheet NAVITAS 33 Revision date : 2009/03/26 Page: 1/5

Safety Data Sheet. Issue Date: 05-Jan-2010 Revision Date: 24-Nov-2014 Version Number: Identification. 2. Hazards Identification

Material Safety Data Sheet

Issue Date: 29-Jul-2013 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Multi-Purpose Neutral Cleaner. 2. HAZARDS IDENTIFICATION

Material Safety Data Sheet

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Product Number:

1. IDENTIFICATION. WipesPlus Patient Washcloths. INFOTRAC (International) (North America) 2. HAZARDS IDENTIFICATION

Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification

Material Safety Data Sheet (alpha-ketoglutaric Acid)

PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Version: 1.1 Revision Date: 01/01/2014 Print Date: 03/05/2014 BIOGUARD CHEM OUT

Material Safety Data Sheet Protective Welding Spray

Issue Date: 27-Dec-2011 Revision Date: 22-Dec-2017 Version 3 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Version 1.2 Revision Date 11/4/2016.

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Telephone: or Fax: Emergency Phone #:

Digital Press Fuser Oil/ Fuser Agent II

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET #32-301/# CONCENTRATED EVAPORATION RETARDER

Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

: Defoamer Concentrate

MATERIAL SAFETY DATA SHEET. Revision Number: 1

SIGMA-ALDRICH. Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name : Titanium(IV) chloride

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Issue Date 21-May-2013 Revision Date 04-May-2016 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION (North America)

Material Safety Data Sheet. Product Name: SoftCIDE -NA Foam Revision Date: 03/27/08 Version: 1

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Starch Solution Product Number:

Issue Date: 11-Jan-2013 Revision Date: 01-Nov-2017 Version Number: Identification

Safety data sheet GLENIUM 3030 NS Revision date : 2009/03/30 Page: 1/5

Krytox NRT 8908 Paste

CB Glass - Liquid Luster SDS Revision Date 01/12/2016. Safety Data Sheet Craft Center Drive Smithville TN Ext 124

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.2 Revision Date 11/22/2012 Print Date 03/04/2014

Material Safety Data Sheet

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: EDVOTEK Instant

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SIGMA-ALDRICH. Material Safety Data Sheet Version 3.8 Revision Date 10/31/2011 Print Date 11/01/2011

Issue Date: 02-Aug-2004 Revision Date: 04-Jun-2015 Version 1 1. IDENTIFICATION. Water based defoamer.

MATERIAL SAFETY DATA SHEET. Revision Number: 3

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Hydrochloric Acid 0.1M Product Number:

CAS-No. EC-No. Index-No. Concentration Hydrogen iodide >= 55 - <= 58 % Water >= 42 %

MATERIAL SAFETY DATA SHEET

Transcription:

Print Date: 06/ 13/2009 The recipient of this Safety Data Sheet is urged to study it carefully to become aware of hazards, if any, of the product involved. In the interest of safety you should (1) notify your employees, agents and contractors of the information on this sheet,(2) furnish a copy to each of your customers for the product, and (3) request your customers to inform their employees and customers as well. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Lubricant Hydraulic fluid Company: Anderol Specialty Lubricants, a division of Chemtura Corporation 215 Merry Lane East Hanover, NJ United States of America07936 Emergency telephone: 973-887-7410 CHEMTREC (US Transportation) : (800) 424-9300 (703) 527-3887 For additional emergency telephone numbers see section 16 of the Safety Data Sheet. Prepared by: Product Safety Department (US) + 1 866-430-2775 (EU) +44 (0) 1753.603.000 Email: MSDSRequest@chemtura.com SECTION 2. HAZARDS IDENTIFICATION Emergency Overview CAUTION! Form: Colour: liquid red May cause eye irritation. May cause skin irritation. OSHA Hazards: THIS MATERIAL IS NOT HAZARDOUS UNDER THE CRITERIA OF THE FEDERAL OSHA HAZARD COMMUNICATION STANDARD 29CFR 1910.1200. Potential Health Effects Primary Routes of Entry Ms Ds Number: ooooo4ooo348 Skin contact Eye contact I of 8

Print Date: 06/ 13/2009 Aggravated Medical Condition Dermatitis Inhalation Skin Eyes Ingestion Mist may cause irritation of the respiratory tract. Prolonged or repeated contact with skin may cause skin irritation. May cause eye irritation. May cause: Diarrhoea Aspiration hazard if swallowed - can enter lungs and cause damage. SECnON 3.COMPOSITION/INFORMATION ON INGREDIENTS Note: This material is non-hazardous as defined by the American OSHA Hazard Communication Standard. SECTION 4. FIRST AID MEASURES First aid procedures Inhalation Skin contact Eye contact Ingestion If inhaled Move to fresh air. If not breathing, give artificial respiration. If breathing is difticult, give oxygen. In case of bluish discoloration (lips, ear lobes, fingernails), give oxygen as quickly as possible. Get medical attention. In case of skin contact Wash off with soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing before re-use. Get medical attention if irritation develops and persists. In case of eye contact Flush with plenty of water. If eye irritation persists, consult a specialist. If swallowed, DO NOT induce vomiting. Consult a physician if necessary. SECnON 5. FIRE-FIGHTING MEASURES Flammable properties Flash point 450 F (232 C) Method: open cup 2 of 8

Lower explosion limit Upper explosion limit Remarks: no data available Remarks: no data available Protective equipment and precautions for firefighters Suitable extinguishing media Carbon dioxide (C02) Dry powder Foam Alcohol-resistant foam Water mist Unsuitable extinguishing media Hazardous combustion products Water Carbon oxides In the event of fire, cool tanks with water spray. Special protective equipment for fire-fighters In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. NFPA Classification Health Hazard: 1 Fire Hazard: 1 Reactivity Hazard: 0 SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Methods for containment I Methods for cleaning up Additional advice Use personal protective equipment. Do not contaminate water. Do not flush into surface water or sanitary sewer system. Discharge into the environment must be avoided. Contain spillage, soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local I national regulations (see section 13). Remove all sources of ignition. Clean contaminated surface thoroughly. Material can create slippery conditions. 3 of 8

SECTION 7. HANDLING AND STORAGE Handling Advice on safe handling Keep container closed when not in use. Do not use pressure to empty drums. Ensure all equipment is electrically grounded before beginning transfer operations. Storage Requirements for storage areas and containers Keep container tightly closed in a dry and well-ventilated place. SECTION 8. EXPOSURE CONTROLS I PERSONAL PROTECTION Engineering measures Engineering measures Use with adequate ventilation. Local ventilation is needed in the presence of airborne mists. Ensure that eyewash stations and safety showers are close to the workstation location. Personal protective equipment Eye protection Hand protection Skin and body protection Respiratory protection Hygiene measures Safety glasses with side-shields Tightly fitting safety goggles Neoprene gloves impervious clothing Not required under normal use. Wear a NIOSHIMSHA approved organic cartridge respirator in high temperature applications if misting or vapor occurs, or there is potential for airborne exposures to exceed established threshold values. Avoid contact with skin, eyes and clothing. Provide adequate ventilation. Do not breathe dust or spray mist. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Msbs Number: 666664()6()348 liquid 4 of 8

Version: Revision Date: Print Date: 1.0 04/15/2009 06/13/2009 Colour red Safety data Flash point Ignition temperature Lower explosion limit Upper explosion limit ph Vapour pressure Relative density 450 F (232 C) Method: open cup Remarks: Not Available no data available no data available not applicable no data available 0.85 SECTION 10. STABILITY AND REACTIVITY Conditions to avoid Materials to avoid Heat. High temperatures. Oxidizing agents Hazardous decomposition products Type: Hazardous combustion products Carbon oxides Hazardous reactions Hazardous polymerisation does not occur. Stable under normal conditions. SECTION 11. TOXICOLOGICAL INFORMATION (Product) ; No data is available on the product itself. 5 of 8

SECTION 12. ECOLOGICAL INFORMATION Additional ecological information : There is no data available for this product. SECTION 13. DISPOSAL CONSIDERATIONS Contaminated packaging Dispose of waste material in compliance with all federal, state, and local regulations. Do not burn, or use a cutting torch on, the empty drum. SECTION 14. TRANSPORT INFORMATION DOT TDG lata IMDG Not dangerous goods Not dangerous goods Not dangerous goods Not dangerous goods MSDS Numbf:)r: o0b6o46oo348.. 6 of 8

Revision Date: 04/ 15/2009 SECTION 15. REGULATORY INFORMATION National regulatory information OSHA Hazards SARA Hazard category This material is not hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29CFR 1910.1200. No SARA Hazards The components of this product are reported in the following inventories: TSCA y (positive On or in compliance with the inventory listing) SECTION 16. OTHER INFORMATION NFPA Classification Health Hazard: 1 Fire Hazard: 1 Reactivity Hazard: 0 HMIS Classification Health Hazard: 1 Flammability: 1 Reactivity: 0 Other Emet"gency Phone Number 7 of 8

Latin America: Brazil +52 113 711 91 44 All other countries +44 (0)208 762 8322 +52 555 004 87 63 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Since the use of this information and of these opinions and the conditions of use of this product are not within the control of the seller, it is the user's obligation to determine the conditions of safe use of the products. 8 of 8