WELDING, BRAZING AND CUTTING KITS Tesuco offers a range of oxygen / acetylene and oxygen / LPG kits to suit the industries they are designed for. This includes complete cutting and welding kits and kits for the plumbing industry where cutting equipment is not required. WELDING, BRAZING AND CUTTING KITS The Tesuco oxygen / acetylene and oxygen / LPG gas kits have been designed to include the equipment needed for the majority of welding, brazing and cutting work. The equipment fully meets the requirements and other referenced standards of AS 4839. The kits include both regulator and torch end flashback arrestors as required and a concise instruction manual that details correct use of the equipment for different processes. Product Only With Packaging Kit Box Equipment Tray Insert Cardboard Box (H) 580 mm (W) 290 mm (D) 220 mm (H) 610 mm (W) 320 mm (D) 260 mm Mild Steel Frame, Plastic Lid and Base Moulded Plastic Rubber Foam Gas Service Regulator Configuration GWKOA / Bottom Entry 12.70 13.80 GWKOAS / Side Entry 12.70 13.80 GWKOL / LPG Bottom Entry 12.40 13.40 GWKOLS / LPG Side Entry 12.40 13.40 industrial Equipment ind_wel_ki_v01
kit inclusion table The following table details the inclusions for each of the Welding, Brazing and Cutting Kits available from Tesuco. For more detailed information on the products, please see the reference table on the following page. Description Part Number GWKOA GWKOAS GWKOL GWKOLS Heavy Duty Red Kit Box with Equipment Tray Regulator Bottom Entry RC1BOX10 Regulator Side Entry RC1SOX10 Regulator Bottom Entry RC1BAC1.5 Regulator Side Entry RC1SAC1.5 LPG Regulator Rear Entry RC1RLP4 Flashback Arrestor Regulator End Standard Flow Fuel Gas FRSFD Flashback Arrestor Regulator End Standard Flow FRSOD Twin Gas Hose 10m / GWTWOA10 Twin Gas Hose 10m / LPG GWTWOL10 Flashback Arrestor Torch End Standard Flow Fuel Gas FTSFD Flashback Arrestor Torch End Standard Flow FTSOD Blowpipe GWWH01 Mixer 10mm GWMI10 Welding Tip / Size #10 GWWT10 Welding Tip / Size #12 GWWT12 Welding Tip / Size #15 GWWT15 Welding Tip / Size #20 GWWT20 Brazing Tip / LPG Size #8 GWBT08 Brazing Tip / LPG Size #12 GWBT12 Brazing Tip / LPG Size #15 GWBT15 Brazing Tip / LPG Size #20 GWBT20 Cutting Attachment GWCA01 Cutting Nozzle / Size #8 GWCNA08 Cutting Nozzle / Size #12 GWCNA12 Cutting Nozzle / Size #15 GWCNA15 Cutting Nozzle / LPG Size #8 GWCNL08 Cutting Nozzle / LPG Size #12 GWCNL12 Cutting Nozzle / LPG Size #15 GWCNL15 Radius Bar and Pivot GWRB Roller Guide GWRG Welding Goggles GWG Flint Lighter GWTF Tip Cleaners GWTC Combination Spanner GWS Instruction Manual for Kits GWKIM WELDING, BRAZING, CUTTING
WELDING, BRAZING AND CUTTING KITS Plumbers WELDING and BRAZING KITS The Tesuco plumbers kit contains all the necessary items for welding, brazing and silver soldering applications. It does not include items not required by this industry, making this kit very cost effective. The equipment fully meets the requirements and other referenced standards of AS 4839. Product Only With Packaging Kit Box Equipment Tray Cardboard Box (H) 485 mm (W) 260 mm (D) 220 mm (H) 500 mm (W) 265 mm (D) 255 mm Plastic Moulded Plastic Gas Service Regulator Configuration GWKPOA / Bottom Entry 7.10 7.60 GWKPOAS / Side Entry 7.10 7.60 GWKPOL / LPG Bottom Entry 6.80 7.30 GWKPOLS / LPG Side Entry 6.80 7.30 industrial Equipment ind_wel_ki_v01
kit inclusion table The following table details the inclusions for each of the Plumbers Welding and Brazing Kits available from Tesuco. For more detailed information on the products, please see the reference table on the following page. Description Part Number GWKPOA GWKPOAS GWKPOL GWKPOLS Light Weight Black Kit Box With Equipment Tray Regulator Bottom Entry RC1BOX10 Regulator Side Entry RC1SOX10 Regulator Bottom Entry RC1BAC1.5 Regulator Side Entry RC1SAC1.5 LPG Regulator Rear Entry RC1RLP4 Flashback Arrestor Regulator End Standard Flow Fuel Gas FRSFD Flashback Arrestor Regulator End Standard Flow FRSOD Flashback Arrestor Torch End Standard Flow Fuel Gas FTSFD Flashback Arrestor Torch End Standard Flow FTSOD Blowpipe GWWH01 Mixer 10mm GWMI10 Welding Tip / Size #10 GWWT10 Welding Tip / Size #12 GWWT12 Welding Tip / Size #15 GWWT15 Welding Tip / Size #20 GWWT20 Brazing Tip / LPG Size #8 GWBT08 Brazing Tip / LPG Size #12 GWBT12 Brazing Tip / LPG Size #15 GWBT15 Brazing Tip / LPG Size #20 GWBT20 Flint Lighter GWTF Tip Cleaners GWTC Instruction Manual for Kits GWKIM WELDING, BRAZING, CUTTING
WELDING, BRAZING AND CUTTING KITS REFERENCES FOR FURTHER INFORMATION ON KIT COMPONENTS The following table details where further information and specifications are available for the products included in each of the kits. Product Catalogue Sections Page Reference Regulators Flashback Arrestors Regulator End Flashback Arrestors Torch End Twin Gas Hose Blowpipes, Mixers and Cutting Attachments Welding and Brazing Tips Cutting Nozzles Other Accessories Industrial Equipment Regulators and Flowmeters Single Stage RC Range Gas Safety Equipment Flashback Arrestors Regulator End Gas Safety Equipment Flashback Arrestors Torch End Industrial Equipment Welding, Brazing, Cutting and Heating Twin Hose 5mm Internal Diameter Industrial Equipment Welding, Brazing, Cutting and Heating Blowpipes, Mixers and Cutting Attachments Industrial Equipment Welding, Brazing, Cutting and Heating Welding and Brazing Tips and Heating Barrels Welding and Brazing Tips Industrial Equipment Welding, Brazing, Cutting and Heating Cutting and Gouging Nozzles Industrial Equipment Welding, Brazing, Cutting and Heating Accessories General Accessories IND_REG_SS_RC_V01 GSE_FBA_RE_V01 GSE_FBA_TE_V01 IND_WEL_TH_05_V01 IND_WEL_BA_V01 IND_WEL_TI_WB_V01 IND_WEL_NO_V01 IND_WEL_AC_GA_V01 industrial Equipment ind_wel_ki_v01
5 MM INTERNAL DIAMETER SINGLE GAS HOSE For inert gas applications, it is important that the hose used to convey the gas from the regulator to the operating equipment is colour coded correctly, is of good quality and meets the required standards. The single hose offered by Tesuco meets (or exceeds) the requirements of AS 1335 and is manufactured to very high specifications, ensuring long service life. BULK HOSE ROLLS (100 Metre Length) Inert gas hose is available in 100 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose assembly can be made. Product Only With Packaging Maximum Working Plastic Wrapped (L) 100 m (Ø) 11 mm (H) 145 mm (Ø) 400 mm Cord Braided Rubber 1,500 kpa Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Taiwan Gas Service Colour GWSHI Inert Gas Black 14.35 14.45 industrial Equipment ind_wel_sh_05_v01
SINGLE HOSE INERT GAS 5mm HOSE SET Tesuco provides a hose set for inert gas. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard. Hose Fittings Maximum Working Gas Service Colour Plastic Bag with Header Card Cord Braided Rubber Brass 1,500 kpa Inert Gas Black Year of Manufacturing Gas Type Australian Standards Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Inlet Connection 5/8-18 UNF RH Female Outlet Connection 5/8-18 UNF RH Female /Taiwan (mm) Product Only With Packaging GWSWIG3 (L) 3 m (Ø) 11 (L) 420 (W) 320 (H) 28 0.50 0.60 WELDING, BRAZING, CUTTING
5 MM INTERNAL DIAMETER TWIN GAS HOSE When using oxygen / acetylene and oxygen / LPG equipment, it is important that the hoses used to convey each gas from the regulators to the operating equipment are colour coded, are of good quality and meet the required standards. The twin hose offered by Tesuco, meets (or exceeds) the requirements of AS 1335 and is manufactured to very high specifications, ensuring long service life. BULK HOSE ROLLS (100 Metre Lengths) Twin hose for oxygen / acetylene and oxygen / LPG is available in 100 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose assembly can be made. Product Only With Packaging Maximum Working Plastic Wrapped (L) 100 m (W) 23 mm (H) 12 mm (H) 180 mm (Ø) 500 mm Cord Braided Rubber 1,500 kpa Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Taiwan Gas Service Colour GWTWOA Blue Red 27.35 27.45 GWTWOL LPG Blue Orange 25.10 25.20 industrial Equipment ind_wel_th_05_v01
TWIN HOSE OXYGEN / ACETYLENE 5 mm HOSE SETS Tesuco has a range of hose sets available for oxygen / acetylene applications. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard. Hose Fittings Maximum Working Gas Service Colour Plastic Bag with Header Card Cord Braided Rubber Brass 1,500 kpa Blue Red Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Inlet Connection Fuel Gas Outlet Connection Fuel Gas 5/8-18 UNF RH Female 5/8-18 UNF LH Female 5/8-18 UNF RH Female 5/8-18 UNF LH Female /Taiwan GWTWOA2.5 GWTWOA5 GWTWOA10 GWTWOA15 (mm) Product Only (L) 2.5 m (W) 23 (H) 12 (L) 5 m (W) 23 (H) 12 (L) 10 m (W) 23 (H) 12 (L) 15 m (W) 23 (H) 12 With Packaging (L) 420 (W) 320 (H) 40 (L) 420 (W) 320 (H) 60 (L) 420 (W) 320 (H) 70 (L) 420 (W) 320 (H) 100 0.85 0.95 1.44 1.54 2.82 2.92 3.90 4.00 WELDING, BRAZING, CUTTING
5 MM INTERNAL DIAMETER TWIN GAS HOSE TWIN HOSE OXYGEN / LPG 5 mm HOSE SETS Tesuco has a range of hose sets available for oxygen / LPG applications. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard. Hose Fittings Maximum Working Gas Service Colour LPG Plastic Bag with Header Card Cord Braided Rubber Brass 1,500 kpa LPG Blue Orange Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Inlet Connection LPG Outlet Connection LPG 5/8-18 UNF RH Female 5/8-18 UNF LH Female 5/8-18 UNF RH Female 5/8-18 UNF LH Female /Taiwan GWTWOL2.5 GWTWOL5 GWTWOL10 GWTWOL15 (mm) Product Only (L) 2.5 m (W) 23 (H) 12 (L) 5 m (W) 23 (H) 12 (L) 10 m (W) 23 (H) 12 (L) 15 m (W) 23 (H) 12 With Packaging (L) 420 (W) 320 (H) 40 (L) 420 (W) 320 (H) 60 (L) 420 (W) 320 (H) 70 (L) 420 (W) 320 (H) 100 0.90 1.00 1.50 1.60 2.80 2.90 3.80 3.90 industrial Equipment ind_wel_th_05_v01
8 MM INTERNAL DIAMETER TWIN GAS HOSE When using high flow oxygen / acetylene and oxygen / LPG equipment, it is important that the hoses used to convey each gas from the regulators to the operating equipment have an adequate internal diameter to provide the flow, are colour coded, of good quality and meet the required standards. For these applications, Tesuco offers an 8 mm diameter hose that meets (or exceeds) the requirements of AS1335 and is manufactured to very high specifications, ensuring long service life. BULK HOSE ROLLS (50 Metre Lengths) Twin hose with an internal diameter of 8 mm for oxygen / acetylene and oxygen / LPG is available in 50 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose set can be made. Product Only With Packaging Maximum Working Marking Plastic Wrapped (L) 50 m (W) 30 mm (H) 15 mm (H) 170 mm (Ø) 460 mm Cord Braided Rubber 1,500 kpa Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Taiwan Gas Service Colour GWTW8OA Blue Red 17.90 17.95 GWTW8OL LPG Blue Orange 17.40 17.45 industrial Equipment ind_wel_th_08_v01
TWIN HOSE OXYGEN / ACETYLENE 8 mm HOSE SETS Tesuco has a range of hose sets available with an 8 mm internal diameter for oxygen / acetylene applications. These are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard. Hose Fittings Maximum Working Gas Service Colour Plastic Bag with Header Card Cord Braided Rubber Brass 1,500 kpa Blue Red Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Inlet Connection Outlet Connection 5/8-18 UNF RH Female 5/8-18 UNF LH Female 5/8-18 UNF RH Female 5/8-18 UNF LH Female /Taiwan (mm) Product Only With Packaging GWTW8OA5 (L) 5 m (W) 30 (H) 15 (L) 420 (W) 320 (H) 25 2.10 2.20 GWTW8OA10 (L) 10 m (W) 30 (H) 15 (L) 420 (W) 320 (H) 35 3.80 3.90 WELDING, BRAZING, CUTTING
8 MM INTERNAL DIAMETER TWIN GAS HOSE TWIN HOSE OXYGEN / LPG 8 mm HOSE SETS Tesuco has a range of hose sets available with 8 mm internal diameter for oxygen / LPG applications. These are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard. Hose Fittings Maximum Working Gas Service Colour LPG Plastic Bag with Header Card Cord Braided Rubber Brass 1,500 kpa LPG Blue Orange Year of Manufacturing Gas Type Australian Standard Standard AS 1335 Hose and Hose Assemblies for Welding, Cutting and Allied Processes Inlet Connection LPG Outlet Connection LPG 5/8-18 UNF RH Female 5/8-18 UNF LH Female 5/8-18 UNF RH Female 5/8-18 UNF LH Female /Taiwan (mm) Product Only With Packaging GWTW8OL5 (L) 5 m (W) 30 (H) 15 (L) 420 (W) 320 (H) 25 1.90 2.00 GWTW8OL10 (L) 10 m (W) 30 (H) 15 (L) 420 (W) 320 (H) 30 3.80 3.90 industrial Equipment ind_wel_th_08_v01
BLOWPIPE, MIXERS AND CUTTING ATTACHMENTS For welding, brazing, cutting and heating applications, Tesuco offer a modular solution including a blowpipe, cutting attachments and a range of mixers to suit different applications. BLOWPIPE The Tesuco blowpipe can be used with the cutting attachment and tips, as well as the range of mixers and tips for welding / brazing and the barrels and tips for heating. The valves have double O ring seals and the blowpipe is marked according to AS 4839. Internals Handle Gas Service Inlet Connection Fuel Gas Brass Die cast handle with red powder coated paint finish Fuel Gas 5/8-18 UNF LH Male 5/8-18 UNF RH Male Tesuco Date of Manufacture (mm) Product Only With Packaging GWWH01 (H) 245 (W) 50 (D) 54 (H) 380 (W) 115 (D) 70 0.59 0.66 industrial Equipment ind_wel_ba_v01
mixers All mixers feature hand tightening for ease of attachment to the blowpipe. The GWMI10 and GWMI13 mixers are suitable for both oxygen / acetylene and oxygen / LPG (natural gas) applications. The GWMI13LN is an injector mixer suitable for super heating oxygen / LPG tips GWHTL3 and GWHTL4 and also for the range of heavy duty heating tips GWHTLH1 GWHTLH5. Mixers are marked according to AS 4839. Gas Service Brass Fuel Gas Tesuco Mixer Type and Size Date of Manufacture GWMI10 (mm) Product Only (H) 88 (W) 28 (D) 28 With Packaging (H) 190 (W) 55 (D) 28 0.12 0.19 GWMI13 (H) 94 (W) 28 (D) 28 (H) 190 (W) 55 (D) 30 0.17 0.25 GWMI13LN (H)165 (W) 28 (D) 28 (H) 300 (W) 120 (D) 30 0.27 0.31 CUTTING ATTACHMENTS Available in both a 90 and 180 head design, the Tesuco cutting torches with multi mixer, is suitable for both Type 41 (oxygen / acetylene) and Type 44 (oxygen / LPG) cutting nozzles. They feature hand tightening for ease of attachment to the blowpipe and are marked according to AS 4839. Gas Service Outlet Connection Brass Fuel Gas Suit Type 41 and 44 Cutting Nozzles Tesuco Date of Manufacture (mm) Product Only With Packaging GWCA01 (H) 280 (W) 80 (D) 52 (H) 385 (W) 115 (D) 54 0.65 0.70 GWCA02 (H) 280 (W) 80 (D) 52 (H) 405 (W) 95 (D) 54 0.65 0.70 WELDING, BRAZING, CUTTING
WELDING AND BRAZING TIPS The correct tip should be selected for the type of gases being used, and processes being performed. Tesuco has a wide range of welding and brazing tips for use with both acetylene and LPG in combination with oxygen. WELDING AND BRAZING TIPS OXYGEN / ACETYLENE TYPE 551 and acetylene tips can be used for fusion welding of mild steel and brazing or silver soldering of many different materials. The Tesuco range of tips is available in different sizes. The tips are marked according to AS 4839. Product Only With Packaging Size 6-15 Size 20 Copper (Ø) 9.5 mm (H) 300 mm (W) 120 mm (D) 13 mm (H) 380 mm (W) 114 mm (D) 13 mm Tip Type, Gas Service Tip Size Gas (kpa) (kpa) Typical Consumption (L/min) / Overall Length (mm) GWWT06 50 50 1.5 66 0.06 0.11 GWWT08 50 50 2 68 0.06 0.11 GWWT10 50 50 3 195 0.08 0.12 GWWT12 50 50 4 217 0.09 0.14 GWWT15 50 50 6.5 238 0.09 0.14 GWWT20 50 50 12 293 0.12 0.18 industrial Equipment ind_wel_ti_wb_v01
BRAZING TIPS OXYGEN / LPG TYPE 554 and LPG tips can be used for the brazing of many different materials. They are available in different sizes and are marked according to AS 4839. Product Only With Packaging Size 8-15 Size 20 (Ø) 9.5 mm (H) 300 mm (W) 120 mm (D) 13 mm (H) 380 mm (W) 114 mm (D) 13 mm Copper Tip Type, Gas Service Tip Size Gas (kpa) (kpa) Typical Consumption (L/min) / Overall Length (mm) GWWT08 50 50 2 68 0.06 0.11 GWWT12 50 50 4 217 0.09 0.14 GWWT15 50 50 6.5 238 0.09 0.14 GWWT20 50 50 12 293 0.12 0.18 WELDING, BRAZING, CUTTING
heating TIPS and barrels When heating processes are required the correctly sized heating tip should be selected for the type of gases being used and processes performed. Tesuco has a one piece tip and barrel and a wide range of tips, barrels and adaptors to suit all requirements. HEATING TIP OXYGEN / ACETYLENE The one piece oxygen and acetylene tip can be used for multi-purpose general workshop heating applications. The tip is marked according to AS 4839. Product Only With Packaging Weight (H) 71 mm (Ø) 19 mm (H) 380 mm (W) 114 mm (D) 13 mm Copper 0.19 kg 0.25 kg Tip Size Tip Type, Gas Service Gas Description (kpa) Typical Consumption (L/min) GWHT812 150 100 45 58 41 55 industrial Equipment ind_wel_ti_hb_v01
HEATING BARRELS Heating barrels are made from tubular stainless steel and come in three lengths. Two bent types and one straight. Threads are to match the larger 13mm mixer at one end and the superheating tips at the other end. Product Only Plastic Bag with Header Card (Ø) 13 mm Stainless Steel Length Overall Length (mm) Packaging (mm) GWHBS450 490 (L) 580 (W) 13 (H) 13 0.20 0.22 GWHBS700 730 (L) 810 (W) 13 (H) 13 0.30 0.33 GWHBS735 740 (L) 840 (W) 13 (H) 13 0.35 0.33 SUPER HEATING TIPS OXYGEN / ACETYLENE Tesuco ranges two sizes of oxygen / acetylene heating tips. These screw directly onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839. Product Only With Packaging Weight (H) 62 mm (Ø) 19 mm (H) 190 mm (W) 56 mm (D) 22 mm Copper 0.11 kg 0.13 kg Part Number Tip Size (kpa) Typical Consumption (L/min) Heat Output (MJ/h) GWHTA1 8 x 12 150 100 45 58 41 55 180 GWHTA2 12 x 12 200 100 74 65 215 WELDING, BRAZING, CUTTING
heating TIPS and barrels SUPER HEATING TIPS OXYGEN / LPG Tesuco has a range of four oxygen / LPG super heating tips to suit various heating applications. These tips screw directly onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839. With Packaging Plastic Bag with Header Card Copper and Brass (H) 115 mm (W) 130 mm (D) 45 mm Part Number LPG Tip Size (kpa) Typical Consumption (L/min) LPG LPG Heat Output (MJ/h) Weight (kg) Product Only (mm) GWHTL1 18 x 12 500 100 200 50 280 0.15 (H) 78 (Ø) 22 GWHTL2 36 x 12 600 100 300 75 420 0.34 (H) 78 (Ø) 34 GWHTL3 48 x 12 600 100 400 100 560 0.56 (H) 78 (Ø) 44 GWHTL4 48 x 15 1000 300 600 150 840 0.58 (H) 78 (Ø) 44 industrial Equipment ind_wel_ti_hb_v01
HEAVY DUTY HEATING TIPS OXYGEN / LPG Tesuco has a range of five heavy duty oxygen / LPG heating tips to suit various very large heating applications. These tips require the GWHBA adaptor to screw onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839. With Packaging Plastic Bag with Header Card (H) 115 mm (W) 130 mm Copper and Brass Tip Size LPG Tip Size (kpa) Typical Consumption (L/min) LPG LPG Heat Output (MJ/h) Weight (kg) Product Only (mm) GWHTLH1 H1 100-200 50 67-117 17-33 186 0.15 (H) 80 (Ø) 19 GWHTLH2 H2 200-300 50 98-213 25-53 298 0.16 (H) 80 (Ø) 19 GWHTLH3 H3 200-500 100 142-382 37-95 532 0.28 (H) 80 (Ø) 25 GWHTLH4 H4 300-600 100 233-473 60-188 663 0.42 (H) 80 (Ø) 35 GWHTLH5 H5 400-800 100-200 283-662 72-167 934 0.66 (H) 80 (Ø) 44 ADAPTOR The adaptor allows the heavy duty heating tips to be fitted to the stainless steel barrels. It means instead of needing two different barrels the same common ones can be used for all heating tips. Product Only With Packaging Weight (H) 39 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Brass 0.29 kg 0.30 kg Description GWHBA Threaded Adaptor to Suit Heavy Duty Heating Tips WELDING, BRAZING, CUTTING
CUTTING AND GOUGING NOZZLES It is important to select the correct nozzle for the materials being used and the work being done. Tesuco has a wide range of cutting and gouging nozzles to ensure you can select the correct one for the job. The range consists of both copper and brass nozzles and oxygen acetylene and oxygen LPG nozzle types are available. SHEET METAL NOZZLE OXYGEN / ACETYLENE TYPE 41 Sheet metal cutting nozzles are specifically designed for cutting very thin mild steel sheet metal. The size and position of the pre-heat and cutting oxygen holes ensures minimal distortion to the metal. Product Only With Packaging Outer Shell Internals Weight (H) 71 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Chrome Plated Brass Copper 0.09 kg 0.10 kg Nozzle Size Plate Thickness (mm) (kpa) (kpa) Cutting Speed (mm/min) Typical Consumption (L/min) GWSMNA06 Sheet Metal 200 100 80 10 industrial Equipment ind_wel_no_v01
CUTTING NOZZLES OXYGEN / ACETYLENE TYPE 41 (COPPER) Copper oxygen and acetylene cutting nozzles perform the same as traditional brass ones but have the advantage of better heat dissipation and less slag adherence. Nozzles are marked according to the requirements in AS 4839. Product Only With Packaging Weight (H) 71 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Copper 0.09 kg 0.10 kg Nozzle Type and Size Plate Thickness Cutting Capacity Plate Thickness (mm) (kpa) (kpa) Cutting Speed (mm/min) Typical Consumption (L/min) GWCNA06 6 200 100 500 11 2 GWCNA08 10 200 100 450 19 3 GWCNA12 12 200 100 380 38 4 20 250 100 360 45 5 25 220 100 320 56 6 GWCNA15 40 350 100 270 75 7 50 400 100 240 84 7 75 450 100 180 95 8 GWCNA20 100 400 100 150 134 9 125 450 100 150 155 10 GWCNA24 150 450 100 130 211 11 200 500 100 100 234 14 GWCNA32 250 600 100 90 420 20 300 600 100 90 420 20 WELDING, BRAZING, CUTTING
CUTTING AND GOUGING NOZZLES CUTTING NOZZLES OXYGEN / ACETYLENE TYPE 41 (BRASS) Traditional brass oxygen and acetylene cutting nozzles are favoured by many users, so Tesuco also offers a range of nozzles in this material. Nozzles are marked according to the requirements in AS 4839. Product Only With Packaging Weight (H) 69 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Brass 0.09 kg 0.10 kg Nozzle Type and Size Plate Cutting Capacity Plate Thickness (mm) (kpa) (kpa) Cutting Speed (mm/min) Typical Consumption (L/min) GWCNA06B 6 200 100 500 11 2 GWCNA08B 10 200 100 450 19 3 GWCNA12B 12 200 100 380 38 4 20 250 100 360 45 5 25 220 100 320 56 6 GWCNA15B 40 350 100 270 75 7 50 400 100 240 84 7 75 450 100 180 95 8 GWCNA20B 100 400 100 150 134 9 125 450 100 150 155 10 industrial Equipment ind_wel_no_v01
GOUGING NOZZLES BENT OXYGEN / ACETYLENE TYPE 41 Gouging nozzles for use with oxygen and acetylene are designed to gouge out metal to the right dimensions when removing faulty welding. They are bent on an angle for ease of use in horizontal positions. Product Only With Packaging Weight (H) 97 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Copper 0.12 kg 0.13 kg Nozzle Type and Size (kpa) (kpa) Typical Consumption (L/min) GWGNA32 500 100 61 15 GWGNA48 600 100 85 18 GOUGING NOZZLES STRAIGHT OXYGEN / ACETYLENE TYPE 41 As with other gouging nozzles, this straight type is designed to gouge out metal to the right dimensions when removing faulty welding, in a vertical position. This model is for use with oxygen and acetylene. Product Only With Packaging Weight (H) 69 mm (Ø) 19mm (H) 190 mm (W) 55 mm (D) 20 mm Copper 0.09 kg 0.10 kg Nozzle Type and Size (kpa) (kpa) Typical Consumption (L/min) GWGNA32S 500 100 61 15 WELDING, BRAZING, CUTTING
CUTTING AND GOUGING NOZZLES CUTTING NOZZLES OXYGEN / LPG TYPE 44 and LPG cutting nozzles perform extremely well for certain applications. Due to less carbon in LPG, there is less slag adherence to the bottom of the cut. Nozzles are marked according to the requirements in AS 4839. Product Only With Packaging Body Internal Weight (H) 69 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Chrome Plated Brass Brass 0.12 kg 0.13 kg Nozzle Type and Size / LPG Plate Cutting Capacity Plate Thickness (mm) (kpa) (kpa) Cutting Speed (mm/min) Typical Consumption (L/min) GWCNL06 6 200 100 500 11 2 GWCNL08 6 200 100 450 30 3.5 GWCNL12 12 200 100 380 50 4 20 250 100 360 68 4.5 25 220 100 320 72 5.5 GWCNL15 40 350 100 270 90 5.5 50 400 100 240 99 5.5 75 450 100 180 111 6 GWCNL20 GWCNL24 GWCNL32 100 400 100 150 149 6 125 450 100 150 171 6.5 150 450 100 130 228 7 200 500 100 100 256 9 250 600 100 90 456 14 300 600 100 90 456 14 industrial Equipment ind_wel_no_v01
GOUGING NOZZLES BENT OXYGEN / LPG TYPE 44 Gouging nozzles for use with oxygen and LPG are designed to gouge out metal to the right size when removing faulty welding. They are bent on an angle for ease of use in horizontal positions. Product Only With Packaging Body Internal Weight (H) 123 mm (Ø) 18 mm (H) 190 mm (W) 55 mm (D) 20 mm Copper Brass 0.14 kg 0.15 kg Nozzle Type and Size LPG (kpa) (kpa) Typical Consumption (L/min) GWGNL32 500 100 94 12 GWGNL48 600 100 120 13 GOUGING NOZZLES STRAIGHT OXYGEN / LPG TYPE 44 As with other gouging nozzles, this straight type is designed to gouge out metal to the right dimensions when removing faulty welding, in a vertical position. This model is for use with oxygen and LPG. Product Only With Packaging Weight (H) 69 mm (Ø) 19 mm (H) 190 mm (W) 55 mm (D) 20 mm Copper 0.12 kg 0.13 kg Nozzle Type and Size LPG (kpa) (kpa) Typical Consumption (L/min) GWGNL32S 500 100 94 12 WELDING, BRAZING, CUTTING
GENERAL ACCESSORIES Tesuco has a range of accessories available. Most of these items are included in the gas cutting and welding kits, but are available to purchase separately as replacements or as additional items. GAS WELDING GOGGLES The Tesuco goggles are the flip up design, which can be operated using one hand. When the shaded lenses are flipped up the user is still protected by a set of clear lenses. This also saves having to remove them in-between welding, brazing and cutting operations. Body Lenses Strap Plastic Bag with Header Card Moulded Plastic Clear Plastic and Plastic Shade 5 Black Elastic Nylon (mm) Product Only With Packaging GWG (H) 190 (W) 75 (D) 85 (H) 320 (W) 190 (D) 75 0.13 0.15 TRIPLE FLINT LIGHTER / TRIPLE FLINT REPLACEMENT The Tesuco triple flint lighter has three flints that can rotate for use as one flint wears out. Replacement triple flints are available separately and come in a pack of four (4). Marking Plated Steel (Flint Gun Only) (mm) Pack Quantity Product Only With Packaging GWTF (H) 175 (W) 45 (D) 20 (H) 300 (W) 120 (D) 29 0.11 0.13 1 GWTFR (H) 24 (W) 24 (D) 7 (H) 190 (W) 55 (D) 19 0.02 0.03 4 industrial Equipment ind_wel_ac_ga_v01
COMBINATION SPANNER The combination spanner is designed to fit the hex sizes of all items in a gas cutting and welding kit. This includes the nozzle nut, hose fittings, roller guides and radius bar. Marking Plastic Pack with Header Card Zinc Plated Steel (mm) Product Only With Packaging GWS (H) 150 (W) 65 (D) 5 (H) 300 (W) 125 (D) 5 0.17 0.19 TIP CLEANING SET During operation, cutting and welding tip holes can become blocked with slag deposits. The tip cleaning set comprises various sizes of round files designed to clear the holes of debris. Case Cleaning Tips Marking Aluminium Steel (mm) Product Only With Packaging GWTC (H) 70 (W) 25 (D) 14 (H) 190 (W) 55 (D) 19 0.03 0.05 WELDING, BRAZING, CUTTING
GENERAL ACCESSORIES ROLLER GUIDE / RADIUS BAR Roller guides are used for accurate cutting where you wish to maintain a constant tip height off the plate. When combined with the radius bar, accurate circles can be cut. Roller guide wheel arms and radius bar is fully adjustable for various heights and circle sizes. Roller Guide Radius Bar Roller Guide and Radius Bar Roller Guide Body Arms / Wheels Radius Bar Plastic Bag with Header Card Plastic Bag with Header Card Brass Mild Steel / Chrome Plated Mild Steel / Chrome Plated GWRB (mm) Product Only With Packaging (H) 320 (W) 40 (D) 16 (H) 510 (W) 130 (D) 16 0.18 0.20 GWRG (H) 110 (W) 60 (D) 30 (H) 300 (W) 120 (D) 29 0.23 0.27 GWRGR (H) 320 (W) 40 (D) 30 (H) 510 (W) 130 (D) 30 0.40 0.42 industrial Equipment ind_wel_ac_ga_v01
HOSE ACCESSORIES Tesuco has a range of accessories for single and twin hose sets for both 5 mm and 8 mm ID hose. The range includes a crimping tool, clips and various hose joiners and fittings. CRIMPING TOOL The crimping tool is specifically designed for use with the GWC5 clips to secure the hose barb once inserted into the ends of the hose. The tool is robust and easy to use and makes this a very simple fixing method. Black Steel with Blue Plastic Handgrip (mm) Product Only With Packaging A2100 (H) 230 (W) 50 (D) 17 (H) 385 (W)115 (D) 24 0.47 0.54 HOSE CLIP This hose clip is designed for use with 5 mm hose nut and tail. They are available as a spare part for hose repairs. Mild Steel (mm) Product Only With Packaging Pack Quantity GWC5D (H) 7 (Ø)16.50 (H)119 (W) 55 (D) 23 0.04 0.07 10 industrial Equipment ind_wel_ac_ha_v01
HOSE JOINER These male threaded hose joiners are designed for the temporary joining of two hose sets when longer lengths are required. They are available in left and right hand for oxygen and fuel gas hoses. Brass Connection (mm) Product Only With Packaging GWHC34 5/8-18 UNF RH Female (H) 29 (Ø) 16 (H) 190 (W) 55 (D) 23 0.05 0.08 GWHC35 5/8-18 UNF LH Female (H) 29 (Ø) 16 (H) 190 (W) 55 (D) 23 0.05 0.08 HOSE NUT AND TAIL WITH CLIP 5 MM This type of nut and hose tail assembly is designed to be fitted into 5 mm hose, then secured with a clip using the special tool. They are available in left and right hand for oxygen and fuel gas hoses. Hose Barb Brass with Mild Steel Clip To Suit 5 mm Hose Inlet Connection (mm) Product Only With Packaging GWHCF 5/8-18 UNF LH Female (H) 41 (Ø) 19 (H) 190 (W) 55 (D) 23 0.05 0.08 GWHCI 5/8-18 UNF RH Female (H) 41 (Ø) 19 (H) 190 (W) 55 (D) 23 0.05 0.08 WELDING, BRAZING, CUTTING
HOSE ACCESSORIES HOSE CONNECTIONS / HOSE JOINERS 5 MM This range of hose connection and joiner use a shroud and hose tail that screw into the 5 mm hose forming a very secure end fitting. A special tool should be used to fit them correctly. The connections are available in left and right hand for oxygen and fuel gas hoses. The joiner is suitable for either hose when a repair is required in the length of the hose. Hose Connection Brass To Suit 5 mm Hose Inlet Connection (mm) Product oonly With Packaging GWLP112RH 5/8-18 UNF RH Female (H) 46 (Ø) 19 (H) 190 (W) 55 (D) 23 0.06 0.09 GWLP240LH 5/8-18 UNF LH Female (H) 46 (Ø) 19 (H) 190 (W) 55 (D) 23 0.06 0.09 GWLP265 To Suit 5 mm Hose (H) 63 (Ø) 19 (H) 190 (W) 55 (D) 23 0.05 0.08 HOSE CONNECTIONS 8 MM This range of hose connection are the same as those above but have a shroud designed for use with 8 mm ID hose. The connections are available in left and right hand for oxygen and fuel gas hoses. Hose Connection Header Card Brass To Suit 8 mm Hose Inlet Connection (mm) Product Only With Packaging GWLP137U 5/8-18 UNF LH Female (H) 49 (Ø) 19 (H) 150 (W) 130 (D) 20 0.06 0.09 GWLP242U 5/8-18 UNF RH Female (H) 49 (Ø) 19 (H) 190 (W) 55 (D) 23 0.06 0.09 industrial Equipment ind_wel_ac_ha_v01
GAS EQUIPMENT DISPLAY STAND The Tesuco Gas Equipment Display Stand has been designed to hold all of the gas equipment that you need, to ensure timely supply of the majority of your customers gas equipment requirements. From individual components and consumable items to full gas kits for oxygen / acetylene and oxygen / LPG, the display stand holds equipment in a compact arrangement that takes up minimal floor space. With a saving of over 40% compared with buying the individual items on the stand separately, the Tesuco Gas Equipment Display Stand is representative of quality and value. DISPLAY STAND Frame Slat Wall Shelves (H)1360 mm (W) 1245 mm (D) 660 mm Powder Coated Steel Laminated Timber / Aluminium Laminated Timber Part Numbers Description gwdb gwdbp Display Stand Products for Display Stand listed below Part Numbers Description Quantity Flashback Arrestors FRD Regulator End Standard Flow / Fuel Twin Display Pack 1 FRHFD Regulator End High Flow Fuel Gas Display Pack 1 FRHOD Regulator End High Flow Display Pack 1 FRQD4D Regulator End Standard Flow Quick Coupling / Fuel Twin Display Pack 1 FRSFD Regulator End Standard Flow Fuel Twin Display Pack 3 FRSOD Regulator End Standard Flow Twin Display Pack 3 FTD Torch End Standard Flow / Fuel Twin Display Pack 1 FTHFD Torch End High Flow Fuel Gas Display Pack 1 FTHOD Torch End High Flow Display Pack 1 FTQD1D Torch End Standard Flow Quick Coupling / Fuel Twin Display Pack 1 FTSFD Torch End Standard Flow Fuel Twin Display Pack 3 FTSOD Torch End Standard Flow Twin Display Pack 3 Brazing Tips / LPG GWBT08 Brazing Tip Size 8 1 GWBT12 Brazing Tip Size 12 1 GWBT15 Brazing Tip Size 15 1 GWBT20 Brazing Tip Size 20 1 industrial Equipment ind_wel_ds_v01
Part Numbers Description Quantity Welding Tips / GWWT06 Welding Tip Size 6 1 GWWT08 Welding Tip Size 8 1 GWWT10 Welding Tip Size 10 2 GWWT12 Welding Tip Size 12 3 GWWT15 Welding Tip Size 15 2 GWWT20 Welding Tip Size 20 1 Cutting Attachment GWCA01 Cutting Attachment 2 Blowpipe GWWH01 Blowpipe 2 Cutting Nozzles / GWCNA06 Cutting Nozzle Size 6 1 GWCNA08 Cutting Nozzle Size 8 3 GWCNA12 Cutting Nozzle Size 12 3 GWCNA15 Cutting Nozzle Size 15 2 GWCNA20 Cutting Nozzle Size 20 2 GWCNA24 Cutting Nozzle Size 24 1 Cutting Nozzles / LPG GWCNL08 Cutting Nozzle Size 8 2 GWCNL12 Cutting Nozzle Size 12 2 GWCNL15 Cutting Nozzle Size 15 2 GWCNL20 Cutting Nozzle Size 20 1 Sheet Metal Cutting Nozzle / GWSMNA06 Sheet Metal Nozzle Size 6 1 Gouging Nozzles GWGNA32 Gouging Nozzle 1 GWGNL32 Gouging Nozzle 1 Kits GWKOA Welding, Heating and Cutting Kit 1 GWKOL Brazing, Heating and Cutting Kit 1 Mixers GWMI10 Mixer 10 mm 2 GWMI13 Mixer 13 mm 1 GWMI13LN Mixer 13 mm Long 1 WELDING, BRAZING, CUTTING
GAS EQUIPMENT DISPLAY STAND Part Numbers Description Quantity Heating GWHBS450 Heating Barrel 1 GWHBS700 Heating Barrel 1 GWHBA Heating Barrel Adaptor 1 GWHT812 Heating Tip Size 8 x 12 1 GWHTA1 Superheating Tip Size 8 x 12 1 GWHTA2 Superheating Tip Size 12 x 12 1 GWHTLH1 Heavy Duty Heating Tip Size H1 1 GWHTLH2 Heavy Duty Heating Tip Size H2 1 GWHTLH3 Heavy Duty Heating Tip Size H3 1 Hose GWTWOA10 Twin Hose / 2 GWTWOA15 Twin Hose / 2 Tip Cleaning Set GWTC Tip Cleaning Set 5 Flint Lighters GWTF Triple Flint Lighter 5 GWTFR Triple Flint Replacement 3 Regulators and Flowmeter RC1BAC1.5 Regulator 1 Stage Bottom Entry 2 RC1BARFG Regulator 1 Stage Bottom Entry 2 RC1BARFM Regulator 1 Stage Bottom Entry 1 RC1BOX10 Regulator 1 Stage Bottom Entry 2 RC1RLP4 Regulator 1 Stage Rear Entry 1 RCFL40 Flowmeter 1 Gauge Protectors SPRGPBD Gauge Protector 50 mm 1 SPRGPRD Gauge Protector 50 mm 1 Goggles GWG Goggles Flip Up Shade 5 2 Roller Guide GWRG Roller Guide 2 GWRGR Roller Guide with Radius Bar 1 industrial Equipment ind_wel_ds_v01
REFERENCES FOR FURTHER INFORMATION ON KIT COMPONENTS The following table details where further information and specifications are available for the products included on each of the display stands. Product Catalogue Sections Page Reference Regulators Flashback Arrestors Regulator End Flashback Arrestors Torch End Twin Gas Hose Blowpipes, Mixers and Cutting Attachments Welding and Brazing Tips Cutting Nozzles Other Accessories Industrial Equipment Regulators and Flowmeters Single Stage RC Range Gas Safety Equipment Flashback Arrestors Regulator End Gas Safety Equipment Flashback Arrestors Torch End Industrial Equipment Welding, Brazing, Cutting and Heating Twin Hose 5mm Internal Diameter Industrial Equipment Welding, Brazing, Cutting and Heating Blowpipes, Mixers and Cutting Attachments Industrial Equipment Welding, Brazing, Cutting and Heating Welding and Brazing Tips and Heating Barrels Welding and Brazing Tips Industrial Equipment Welding, Brazing, Cutting and Heating Cutting and Gouging Nozzles Industrial Equipment Welding, Brazing, Cutting and Heating Accessories General Accessories IND_REG_SS_RC_V01 GSE_FBA_RE_V01 GSE_FBA_TE_V01 IND_WEL_TH_05_V01 IND_WEL_BA_V01 IND_WEL_TI_WB_V01 IND_WEL_NO_V01 IND_WEL_AC_GA_V01 WELDING, BRAZING, CUTTING